Used Hurco Bmc 30 for sale (154)

Condition: good (used), Year of construction: 2005, Hurco - VMX30 - 3-Axis Machining Center Year of build 2005 Serial number H-30516 Travel x-axis 760mm Travel y-axis 510mm Travel z-axis 510mm T-slot fixture table size W 510mm T-slot fixture table size L 1510mm Engine power (kW) 11kW Csdpfxju A Dnps Aiijri Machine weight 4800kg

Condition: good (used), Year of construction: 2002, functionality: fully functional, Hurco VMX 64, Crsdsy T Iuvepfx Aiiei Year of manufacture: 2002, Control system: Ultimax 4, Travel range X/Y/Z: 1625/860/760 mm, Tool changer: 40-position, Spindle speed: up to 8,000 rpm, High-pressure coolant system, Chip conveyor system, Pocket with islands, DXF, Simultaneous threading, Ultinet, Workpiece positioning detection, Ramping/helix plunging, Advanced Velocity Control, Z-axis cover defective.

Condition: excellent (used), Year of construction: 2016, Traverses X Y Z: 1524mm x 660mm x 610mm, Table size 1676mm x 660mm, 600mm C axis Table (360 degrees) +/- 92-degree head (B axis), 37kW Spindle Motor, 40 station side arm ATC, din 40 spindle taper, 12,000rpm spindle, Hurco Winmax 5 control, Crsdpfx Aiszi Tibsiji through spindle coolant, swarf conveyor,

Condition: excellent (used), Year of construction: 2017, Traverses X Y Z: 1016mm x 508mm x 508mm, table size 1168mm x 508mm, 10000rpm spindle, Cjdpfxezh Hw No Aiieri 20 station ATC, BT40 spindle taper, input 15kW, Hurco WINMAX 5 control, coolant, swarf auger.

Condition: excellent (used), Year of construction: 2011, operating hours: 5,680 h, functionality: fully functional, Control system: WINMAX V08 Table dimensions: 1220 x 610 mm / D600 mm Table load capacity: 1000 kg X-axis travel: 1060 mm Y-axis travel: 610 mm Z-axis travel: 610 mm C-axis: 0 - 360 degrees A-axis: +/-92 degrees Spindle speed: 12000 rpm Spindle taper: SK40 Drive power: 11/18 kW Weight: 7500 kg Dimensions (LxWxH): 3200 x 2450 x 2650 mm Accessories / Features - NC rotary table - Swivel spindle - CTS 20 bar (Coolant Thru Spindle) - Chip conveyor Crjdpfx Aey Ux Tfjiiji - Coolant system - RENISHAW zero-point measuring system with touch probe - Machine feet - Manuals The machine is in very good technical condition. Immediately available.

Condition: used, Year of construction: 2011, Technical details: x-travel: 660 mm y-travel: 355 mm z-travel: 500 mm Cjdozq S D Tepfx Aiisri total power requirement: 19 kW weight of the machine ca.: 4,1 t

Condition: good (used), Year of construction: 2011, Due to liquidation, this machine is now available. Condition: very good. Regularly maintained. Crjdpfx Aozzlqhjiiji Immediately available. Hurco VMX24t incl. KITAGAWA rotary table Year of manufacture: 2011 Number of axes: 5 X-axis travel: 610 mm Y-axis travel: 510 mm Z-axis travel: 610 mm 24-position tool changer Electric handwheel Internal cooling system Winmax control

Condition: good (used), Year of construction: 2014, functionality: fully functional, Hurco VM 20 i, Year of manufacture: 2014, Control system: Winmax, Travel range X/Y/Z: 1016/508/400 mm, Tool changer: 24-position, Tool holder: SK 40, Spindle speed: up to 12,000 rpm, Chip conveyor, Cjdpfxjzc Icwo Aiiori Approximately 11,000 operating hours.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, travel distance X-axis: 820 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, number of slots in tool magazine: 60, Equipment: chip conveyor, General Control: Max 5 Year of manufacture: 2023 Working Area Travel X: 820 mm Travel Y: 550 mm Travel Z: 500 mm Travel B: +110° / -110° Travel C: 360° Tool changer: 60 stations Rapid traverse X/Y/Z: 36 / 36 / 36 m/min Spindle Speed: 12,000 rpm Power: 16 kW Cjdpeyap Tfjfx Aiisri Tool holder: SK40 NC Rotary Table Clamping surface L x W: 600 x 600 mm Spindle nose to table: 150 - 650 mm Table load capacity: 350 kg Equipment Chip conveyor Coolant supply Direct path measuring system Through-spindle air 5-axis simultaneous capability Workpiece measurement Tool measurement High-pressure coolant (IKZ)

Condition: good (used), Year of construction: 2020, functionality: fully functional, turning diameter over cross slide: 402 mm, turning diameter: 295 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 250 mm, travel distance Z-axis: 750 mm, overall weight: 5,000 kg, We offer in good condition Hurco TMM10i with the Winmax V11 software machine has following options: X-Axis travel: 250 mm Z-Axis travel: 750 mm Driven tools VDI 40 4.000 RPM Machine weight 5.000 kg Machine can be inspected under power. Machine has following options: Renishaw tool arm Internal coolant 20 bar Crodjzpfb Nopfx Aiiji

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 661 mm, travel distance Y-axis: 407 mm, travel distance Z-axis: 508 mm, table load: 1,500 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 11,000 W, number of slots in tool magazine: 24, tool weight: 7,000 g, number of axes: 3, This 3-axis Hurco VM10i was manufactured in 2016. It features an X-axis travel of 661 mm, Y-axis travel of 407 mm, and Z-axis travel of 508 mm. The machine includes a robust table size of 762 x 406 mm and a maximum table load of 1,500 kg. If you are looking to get high-quality machining capabilities, consider the Hurco VM10i vertical machining centre we have for sale. Contact us for further details. • CNC Control: HURCO MAX 5 (WinMax software version V10.01.131.12) • Table Dimensions: 762 x 406 mm • T-Slots: 3 x 18 mm • T-Slot Center Distance: 10 mm • Spindle Nose to Table Distance: 102 - 610 mm • Spindle Torque: 72 Nm • Rapid Traverse (X/Y/Z): 28,000 mm/min • Tool Magazine Capacity: 24 positions • Maximum Tool Diameter (Adjacent Occupied): 80 mm • Maximum Tool Diameter (Adjacent Empty): 120 mm Credpfxozgf Hts Aiiji • Maximum Tool Length: 250 mm • Machine Working Hours: 15,420 h 10 min • Spindle Hours: 2,727 h 59 min • Monitor: 19" Touch Screen • Hardware: 128 GB SSD, 4 GB RAM, Dual-Core 2.7 GHz Processor • Connectivity: 2x USB 2.0 (console), 2x USB (electrical cabinet), 1x Ethernet LAN Additional equipment • Remote electronic handwheel • Auger-type chip conveyor • Wash gun (water/air) • Status tower lamp • Retention knobs • Leveling pads Technical Specification Taper Size ISO 40

Condition: used, Hurco TM10i, 2 Axis CNC Lathe, Year 2007, 250mm Diam 3 Jaw Chuck, Tailstock, Hydrafeed MV65 Bar Feed, Collet Chuck Unused In Box, Cedpfx Aie Aggp Tjisri Hurco TM10i CNC turning centre with slant bed design. Precision CNC lathe suitable for subcontract machining, production engineering and general manufacturing applications. The Hurco TM10i CNC Turning Centre is a versatile slant bed CNC lathe designed for precision machining and efficient production of turned components. Suitable for subcontract engineering, general manufacturing and production environments, the machine offers the flexibility required for a wide range of turning applications. Manufactured by Hurco, a recognised supplier of CNC machine tools, the TM10i combines robust construction with reliable machining performance. The slant bed design promotes excellent rigidity and chip evacuation, helping to maintain accuracy and consistent part quality during production. Ideal for machining a variety of components and materials, the TM10i provides an excellent opportunity to acquire a quality CNC turning centre from a respected manufacturer. Its compact footprint and practical design make it suitable for both established machine shops and expanding engineering businesses. Available for inspection at our Prestwick, Ayrshire facility. Specifications: Swing: 22.9" Machining Length: 29.9" Chuck Size: 10" Bar Capacity: 3.19" Power: 29.5 hp Max RPM: 3,000 RPM Turning Dia: 17.7"

Condition: ready for operation (used), Year of construction: 2007, operating hours: 117,713 h, travel distance X-axis: 1,060 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, total height: 2,770 mm, table width: 3,750 mm, overall weight: 6,650 kg, product length (max.): 4,535 mm, This 3-axis Hurco VMX 42 was manufactured in 2007. It features an X-axis travel of 1,060 mm, Y-axis travel of 610 mm, and Z-axis travel of 610 mm. The machine includes a robust table size of 1,270 × 610 mm and a maximum table load of 1,100 kg. If you are looking to get high-quality machining capabilities, consider the Hurco VMX 42 vertical machining centre we have for sale. Contact us for further details. • Spindle Nose to Table: 150 – 760 mm • Feed Rate Programmable: 3 – 7600 mm/min • Feed Rate via Console: 3 – 11400 mm/min • Rapid Traverse X/Y/Z: 35 / 35 / 30 m/min • Guideways: Linear guideways (X, Y, Z) • Positioning Accuracy: ±0.01 mm • Repeatability: ±0.005 mm • Table Size: 1270 × 610 mm • T-slots: 5 (DIN 650) T-slot • Width: 18 mm • Distance Between T-slots: 100 mm • Maximum Table Load: 1100 kg • Automatic Tool Changer Type: Drum magazine • Number of Tool Positions: 24 • Maximum Tool Diameter: 80 mm • Maximum Tool Weight: 7 kg • Maximum Tool Length: 300 mm • Tool Holder: SK 40 (DIN 69871) • Pull Stud: ISO 7388/II Type B • Coolant Tank Capacity: 340 liters Cjdpfoynil Rsx Aiieri • Machine-Specific Data • Spindle Drive Power (Continuous): 18.0 kW • Maximum Torque: 720 Nm • Torque at 1 min ED: 237 Nm • Spindle Speed Range: 10 – 12000 rpm • Mount Position (Assembly) • Measuring System: Photoelectric • Standard: Rotary motor encoder • Central Lubrication System: 1 pump (X, Y, Z) • Electrical Connection: 38 kVA / 55 A • Voltage: 400 V • Compressed Air Connection: 6 bar / 0.3 m³/min

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 1067mm x 610mm x 610mm, Table size 1270mm x 610mm, 600mm C axis Table (360 degrees) +/- 90-degree head (B axis), 37kW Spindle Motor, 40 station side arm ATC, din 40 spindle taper, 12,000rpm spindle, Csdpfxozh Nczo Aiiori Hurco Winmax 5 control, through spindle coolant, swarf conveyor, spindle probe.

Condition: used, Year of construction: 2023, surface area 1168 x 508 mm max. table load 1800 kg travel -x axis 1016 mm travel -y axis 508 mm travel -z axis 508 mm spindle taper SK40 spindle speed 10000 U/min spindle capacity 15 kW spindle torque max. 99 Nm rapid traverse y/x/z axis 28 m/min control HURCO MAX5 total power requirement 20 kW weight of the machine ca. 4,15 t dimensions of the machine ca. 3,7 x 3,3 x 2,5 m The machine is like new !!!, only 61 spindle hours Cedpfxjza Hqne Aiiori Tool changer: - Magazine capacity: 24 positions - Max. tool diameter: 80 mm - Max. tool length: 360 mm - Max. tool weight: 7 kg Accessories: documentation

Condition: ready for operation (used), Year of construction: 2015, operating hours: 9,000 h, travel distance X-axis: 610 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, controller manufacturer: HURCO, controller model: WinMax / MAX5, table width: 508 mm, table length: 760 mm, table load: 1,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 9,000 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Hurco VMX 24i was manufactured in 2015. It features an X-axis travel of 610 mm, Y-axis travel of 508 mm, and Z-axis travel of 610 mm. The machine includes a robust table size of 760 x 508 mm and a maximum table load of 1,500 kg. If you are looking to get high-quality machining capabilities, consider the Hurco VMX 24i vertical machining centre we have for sale. Contact us for further details. Credszc Rzijpfx Aiisi - Tool Holder: SK40 / CAT40- Max. Torque: 95 Nm- Max. Tool Diameter: 80 mm- Max. Tool Length: 300 mm- Max. Tool Weight: 7 kg- Rapid Traverse X/Y: 38 m/min- Rapid Traverse Z: 32 m/min- Additional Equipment: Automatic centralized lubrication, Chip flushing system, Scraper belt conveyor, Coolant unit, Electronic handwheel, Network connection- Included in Delivery: CNC milling machine Hurco VMX 24i- Excluded Items: Vise, tools, clamping devices, other accessories

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 402 mm, turning length: 758 mm, turning diameter: 450 mm, spindle speed (max.): 3,000 rpm, turning diameter over bed slide: 582 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum turning diameter: 450 mm Maximum turning length: 758 mm Csdpfx Aozgt U Soiieri Diameter of rotation over the bed: 582 mm Diameter of rotation over the cross slide: 402 mm Spindle speed: 3,000 rpm Maximum spindle torque: 351 Nm Distance between centers: 744 mm Bar diameter: 81 mm Chuck size: 260 mm (10") Maximum bar diameter: 40 mm Axes: X, Z Number of tool positions in the tool changer: 12 Tool shank size: 25 × 25 mm Travel in the X-axis: 250 mm Travel in the Z-axis: 790 mm Rapid traverse rate in the X/Z direction: 30 m/min MACHINE DETAILS Control model: Hurco WinMax Spindle power: 22 kW Power supply: 400 V / 50 Hz (market-dependent) Machine weight: approx. 5,000 kg

Condition: good (used), Year of construction: 2008, functionality: fully functional, Hurco VMX 50 T, Year of manufacture 2008, Winmax control system, 40-position tool changer, High-pressure coolant system, Spindle speed up to 12,000 rpm, Chip conveyor, Simulation graphics, Pocket with islands, Synchronous tapping, Csdjy T Iwqjpfx Aiijri Helix, 3D option, NC/dialog mix, Surface selection, Tool change optimization, Tool and material database, X-axis bearing likely defective.

Condition: good (used), Year of construction: 2005, HURCO vertical machining center with 4th axis, including: 16.000 RPM SK40 (BIG-PLUS) spindle HYDAC cooling unit High-Pressure Through-Spindle Coolant System Tool Length Measurement and Workpiece Position Detection with two Renishaw probing systems CNC-Controlled Rotary Table MR320 X-axis Travel 1270 mm Y-axis Travel 650 mm Crodszt R Ivepfx Aiiji Z-axis Travel 610 mm Max spindle speed 16000 rpm Full technical specifications in the attached document. Viewing of the machine in operation is possible upon appointment. Availability: 12/2026 Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: not inspected (used), Year of construction: 2003, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 640 mm, Ultimax control Crsdpfx Aisxu Ikqjisi BT 40 spindle, new in 2020 speed 10,000 rpm travels 1270X660X640 mm 24-tool changer chip conveyor

Condition: ready for operation (used), Year of construction: 2014, operating hours: 10,000 h, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 24, number of axes: 3, This 3-axis Hurco VM20i was manufactured in 2014. It features an X-axis travel of 1,016 mm, Y-axis travel of 508 mm, and Z-axis travel of 400 mm. The machine includes a table size of 1,170 x 507 mm and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the Hurco VM20i vertical machining centre we have for sale. Contact us for further details. • Control: WINMAX • Clamping System: SK40 DIN69871 AD/B • Tool Holder: SK40 • Table Size: 1,170 x 507 mm • Spindle Hours: Approx. 10,000 h • Condition: Used • CE Marking: Yes • Frequency: 50 Hz • Voltage: 400 V • Power Supply: 3 Phase • Largest Motor: 13 kVA • Full Load: 20 kVA • Interrupt Capacity: 10,000 A Crsdpfx Aezc If Sjiiji • Short Circuit Current: 22 kA RMS Symmetrical • Maximum Ambient Temperature: 35 °C Technical Specification Through-spindle Coolant No

Condition: used, Year of construction: 2014, Milling machines Travel distance X: 1067 mm Travel distance Y :610 mm Travel distance Z: 610 mm Cedezguhyspfx Aiisri HSC-machines Number of axis: 3 milling machine / machining center spindle revolutions: 12000 rpm table size X: 1270 mm table size Y: 610 mm input Power : 12 kW Torque: 237 Nm High-performance 3-axis machining center Number of tools in the magazine: 30 SK40 tool holder Internal coolant supply Spindle cooler

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, turning diameter: 295 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 250 mm, travel distance Z-axis: 750 mm, controller model: Hurco WinMax V11, TECHNICAL DETAILS Swinging diameter over cross slide: 402 mm Swinging diameter: 295 mm Spindle speed (max.): 3,000 rpm Travel in X-axis: 250 mm Travel in Z-axis: 750 mm Driven tools: VDI 40 Speed of driven tools (max.): 4,000 rpm MACHINE DETAILS Control system: Hurco WinMax V11 Machine weight: 5,000 kg Credpezy Iknofx Aiioi EQUIPMENT Renishaw tool measuring arm Internal cooling: 20 bar

Condition: good (used), Year of construction: 2004, operating hours: 6,900 h, functionality: fully functional, Controller: ULTIMAX4 DSM with LCD screens Table dimensions: 762 x 355 mm X-axis travel: 660 mm Y-axis travel: 355 mm Z-axis travel: 455 mm Spindle speed: 10 – 10000 rpm Spindle taper: SK40 Tool changer: 16-station Main drive power: 11 / 9.4 kW Cjdezmhy Aopfx Aiisri Machine weight: 2800 kg Machine dimensions: 1800 x 1600 x 2500 mm Accessories: - Software version 2.37 with English user interface - Software options: Rigid tapping, Pockets/Islands, AVC, Helical/Ramp, ULTINET (Network) - Coolant system - Signal lamp - USB interface - Portable electronic handwheel - Machine feet The machine is in good used condition. Still under power. It is being sold due to company liquidation.

Condition: excellent (used), Year of construction: 2006, Winmax control Travel X/Y/Z: 1270 x 660 x 610 mm Csdszwhlajpfx Aiieri Spindle speed: 10,000 rpm Tool magazine for 24 tools, SK 40 Through-spindle coolant 20 bar Pocket milling with islands Synchronous thread cutting