Used Hsk63 for sale (97)

Condition: good (used), Year of construction: 2010, operating hours: 25,000 h, functionality: fully functional, machine/vehicle number: AA2/001307, travel distance X-axis: 6,500 mm, travel distance Y-axis: 1,700 mm, travel distance Z-axis: 250 mm, rapid traverse X-axis: 60,000 m/min, rapid traverse Y-axis: 45,000 m/min, rapid traverse Z-axis: 30,000 m/min, feed length X-axis: 6,500 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 1 mm, feed rate X-axis: 6,000 m/min, feed rate Y-axis: 45,000 m/min, feed rate Z-axis: 30,000 m/min, nominal power (apparent): 15 kVA, controller manufacturer: NUM, controller model: 1040, workpiece length (max.): 6,500 mm, workpiece width (max.): 1,350 mm, workpiece height (max.): 180 mm, total height: 2,750 mm, total length: 8,000 mm, total width: 4,000 mm, table width: 1,350 mm, table height: 950 mm, table length: 6,500 mm, spindle speed (min.): 24,000 rpm, spindle motor power: 11 W, Working travel of axes X-Y-Z: 6500 x 1350 x 250 mm Working area: 6500 x 1250 mm C-Axis = 640, B-Axis = 270 PRISMA milling unit with 5 interpolating axes X, Y, Z, C, B Electric spindle 11 kW, 600–20,000 rpm Tool holder HSK63 Working table with TVN pads and vacuum cups Cross laser projector on working table TVN vacuum cup Pneumatic clamps Tool magazine for 24 tools Itodsw Au N Sjpfx Ah Nob Drilling unit Vacuum pump 5.5 kW, 250 m³/h CNC control NUM Operating system: Windows XP Xilog Plus Maestro Weight approx. 5,450 kg

Condition: used, Year of construction: 2003, Technical details: x-travel: 800 mm y-travel: 400 mm z-travel: 350 mm total power requirement: 44 kW weight of the machine ca.: 8,8 t dimensions of the machine ca.: 6,1 x 4,1 x 3,3 m tool taper: HSK63 number of spindle speeds: 36-12.000 Number of tools: 2 x 21 St. rotary table diameter: 1340 mm Itedpjuqq Uqjfx Ah Neb

Condition: new, Year of construction: 2026, Technical data Control system multi-axis real-time interpolator, with active trajectory prediction, LAN communication, EtherCat, sampling time below 1ms, correction map, RTCP, remote service access Working area 2100x4100mm Z-axis clearance 400mm Drive system servo drives with EtherCat protocol, X, Y hardened helical strips ground in accuracy class 6, Z axis ball screw in accuracy class 5 Linear bearings trapezoidal rails Speed ​​of travel up to 60 m/min Program resolution up to 0.0001 mm Positioning accuracy 0.01mm Gate drive double-sided master/slave with gate angle correction Electric spindle 17kw s6 tilt/rotate head kit axis range a= +- 185°, c= +- 320°, orbital k plus px-2 15/12 63f nc hsk63 for 5 axis machines Ijdpfx Ahovyrgqs Nstb Tool cone HSK63F Maximum speed of the electrospindle up to 24,000 rpm Design welded steel, ribbed, stress-relieved, precisely machined Milling cutter shank diameters from 2 to 20 mm (optional up to 26 mm) Brushless electrospindle Table type vacuum, pneumatic sections Equipment options 3-position linear magazine 16-position revolver magazine with tool presence sensor positioning bases and vacuum blocks automatic central lubrication with solid grease pressure booster security fence intelligent vacuum sections wireless manipulator sensor for measuring the length and diameter of the tool positioning laser

Condition: new, Year of construction: 2026, Technical Data Control System: Multi-axis real-time interpolator with active trajectory prediction, LAN communication, EtherCat, sampling time below 2 ms, correction map, RTCP, remote service access. Working Area: X: 2500–4000 mm, Y: 6000–12000 mm Z-Axis Clearance: 300–700 mm Drive System: Servo drives with EtherCat protocol, X and Y axes with hardened and ground helical racks (accuracy class 6), Z axis with ball screw (accuracy class 5) Linear Bearings: Trapezoidal guide rails Ieden Sk Huepfx Ah Notb Traverse Speed: up to 80 m/min Software Resolution: up to 0.0001 mm Positioning Accuracy: 0.01 mm Gantry Drive: Dual-sided master/slave with gantry angle correction Electrospindles: 12 kW up to 50 kW powered by inverter Tool Taper: ISO30 or HSK63 ER32 Maximum Electrospindle Speed: 24,000 rpm (optionally 6,000; 40,000; 50,000) Construction: Welded, ribbed, stress-relieved steel frame, precision machined Table Type: T-slot aluminum grid, solid aluminum, or solid steel Equipment Options: - Material positioning and correction via camera, laser, or measuring probe - Linear or turret tool magazine - Tool cooling with oil mist or chilled air - 3D scanner (laser or contact) - Positioning bases - Additional angular/rotary axes - Drilling and angular heads - Pneumatic workpiece clamps - Part marking - Integration with industrial robot - 3D CAD/CAM software - Automatic central lubrication - Automated liquid cooling system #ploter #CNC #router #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint #MDF #HPL #Plywood #chipboard #steel #aluminium #aluminum #brass #stainlesssteel #castiron #polypropylene #polycarbonate #acrylic #fermacell #BLUM

Condition: new, Year of construction: 2026, Technical data Control system Multi-axis real-time interpolator, with active trajectory forecasting, LAN communication, EtherCat, 2ms sampling time, optional RTCP tool end tracking, correction map Working area X 600 – 2500mm Y 900 – 6100 mm Gate clearance and Z axis range 100 – 700 mm Drive system Omron servo drives with EtherCat protocol, X, Y helical slats hardened ground in accuracy class 6, Z axis ball screw with accuracy class 5 Linear bearing Trapezoidal rails, Bosch Rexroth 25 Speed Up to 90 m/min Itodon Nwifopfx Ah Nob Acceleration Up to 1G Program resolution Up to 0,0001mm Positioning accuracy 0,01 mm Gate drive double-sided master / slave with gate angle correction Electrospindles 2 kW to 18 kW powered by an inverter Tool taper ISO30 or HSK63 ER32 Maximum speed of the electro-spindle 24000 rpm (option 6 000, 40 000, 50 000) Construction Steel welded, ribbed, stress relieved, precision machined Equipment options positioning and correction of the material by means of a camera, laser, measuring probe linear, revolver tool magazine cooling the tool with mist, chilled air 3D laser or touch scanner positioning databases additional angular / rotary axes drilling units, angular active oscillating knife, roller knife, drag knife, creaser, marker pen pneumatic clamping clamps chip extraction installation Table type T-slot: aluminum profiles, solid aluminum, solid steel; vacuum; hybrid, pneumatic clamping clamps

Condition: new, Year of construction: 2026, Technical data Control system: Multi-axis real-time interpolator, with active trajectory forecasting, LAN communication, EtherCat, 2ms sampling time, optional RTCP tool end tracking, correction map. Working area: X 600 x 900 mm Y 3000 x 12000 mm Gate clearance and Z axis range: 100-1000 mm Drive system: Omron servo drives with EtherCat protocol, X, Y helical slats hardened ground in accuracy class 6, Z axis ball screw with accuracy class 5 Linear bearing: Trapezoidal rails, Bosch Rexroth 25 Speed: Up to 120 m / min Acceleration: Up to 1G Program resolution: up to 0.0001mm Itodpfx Ahjn Hq Huj Nsb Positioning accuracy: 0.01 mm Gate drive: double-sided master / slave with gate angle correction Electrospindles: 2 kW to 36 kW powered by an inverter Tool taper: ISO30 lub HSK63 ER32 Maximum speed of the electro-spindle: 24,000 rpm (option 6,000, 40,000, 50,000) Construction: Steel welded, ribbed, stress relieved, precision machined Equipment options positioning and correction of the material by means of a camera, laser, measuring probe linear, revolver tool magazine cooling the tool with mist, chilled air 3D laser or touch scanner positioning databases additional angular / rotary axes drilling units, angular active oscillating knife, roller knife, drag knife, creaser, marker pen pneumatic clamping clamps chip extraction installation integration with an industrial robot Table type: T-slot: aluminum profiles, solid aluminum, solid steel; vacuum; hybrid, pneumatic clamping clamps

Condition: new, Year of construction: 2026, Technical data: Control system: multi-axis real-time interpolator with active trajectory prediction, LAN and EtherCat communication, sampling time below 2 ms, correction map, RTCP, remote service access. Working area: 2100 x 3100 mm (optionally 2100 x 4100 mm) Z-axis clearance: 100 – 300 mm Drive system: servo drives with EtherCat protocol, X and Y axes with hardened, helical ground racks, accuracy class 6; Z-axis with ball screw, accuracy class 5. Linear bearings: trapezoidal rails Rapid traverse speed: up to 80 m/min Software resolution: 0.0001 mm Ijdpju U Hnaefx Ah Nstb Positioning accuracy: 0.01 mm Gantry drive: dual-side master/slave with gantry angle correction Electrospindles: 8 kW to 36 kW, inverter-driven Tool holder taper: ISO30 or HSK63 ER32 Maximum spindle speed: 24,000 rpm Construction: welded, ribbed, stress-relieved steel, precision machined Table type: vacuum Equipment options: - Material positioning and correction via camera, laser, or measuring probe - Revolver-type tool magazine - Tool cooling by oil mist or chilled air - 3D scanner (laser or touch probe) - Positioning bases - Drilling units, angular heads - Active oscillating knife, circular knife, drag knife, creasing tool, pen, knife - Electric and pneumatic options - Chip extraction system - Pneumatic sections - Printer, barcode reader - CAD/CAM software for furniture, cabinetry, and front design - Automatic central lubrication #ploter #CNC #router #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint #MDF #HPL #Plywood #chipboard #steel #aluminium #aluminum #brass #stainlesssteel #castiron #polypropylene #polycarbonate #acrylic #fermacell #BLUM

Condition: repair required (used), Year of construction: 2014, functionality: not functional, machine/vehicle number: 67137, Technical characteristics: Work Area - Maximum clamping plate diameter: 250 mm - Maximum turning diameter: 250 mm - Maximum machining diameter: 220 mm - Maximum workpiece length: 200 mm - X-axis travel: 886 mm / Rapid traverse X: 60 m/min - Z-axis travel: 250 mm / Rapid traverse Z: 30 m/min - Y-axis travel: -85/+100 mm / Rapid traverse Y: 30 m/min - Standard closed automation (number of loading stations by workpiece diameter): 14/(80...200), 18/(30...160), 30/(30...85) Main Spindle - Spindle (Weiss) per DIN 55026: Size A6 - Maximum speed: 5,500 rpm - Power at 100% duty cycle: 38 kW - Torque at 100% duty cycle: 300 Nm Secondary Spindle HSK63 - Spindle head size/type: HSK-A63 - Nominal speed: 2,700 rpm / Nominal power: 12 kW / Nominal torque: 42.4 Nm - Maximum speed: 15,000 rpm - Power at 100% duty cycle: 38 kW - Torque at 100% duty cycle: 300 Nm Tool Holder with Motorized Tools - Turret VDI40, Siemens-drive 0.5.440.220 (manufacturer: Sauter) - Number of stations: 12 - Live tool nominal speed: 3,000 rpm / Nominal torque: 33.1 Nm - Live tool maximum speed: 10,000 rpm / Nominal torque: 56.2 Nm - Live tool nominal power at 100% duty cycle: 10.4 kW Electrical Equipment - Operating voltage: 400 V, fused 100A GL - Connected load: 45 kW Dimensions - Overall dimensions: Length = 4,021 mm, Width = 4,709 mm, Height = 3,527 mm Isdpfx Ajxxi Ursh Nstb - Weight: 8,000 kg Main Features and Capabilities: - Vertical design for optimal chip evacuation and easy loading/unloading - Control system: Siemens 840D SL - High precision with Heidenhain linear scales for X, Y, Z axes - High-power main spindle (Weiss) with a wide speed range - High-power secondary spindle (Weiss), easily accessible for drilling/milling operations - Automated loading/unloading via integrated automation - In-process control probe: Marposs T25 - Live tooling for extended machining capabilities (drilling, milling, etc.) - Chip conveyor: Knoll - Coolant 'paper' filter unit & chiller: Knoll KF150/500 - Electrostatic mist filter: IFS type IFM1000 Machine status: NOT WORKING - Sauter turret replaced with new unit; assembly not complete – turret motor spindle installation still required - Operator panel safety switch needs replacement

Condition: new, Year of construction: 2025, Cost-effective four-axis profile machining center (X, Y, Z + I - rotary table axis) for automatic three-sided machining of profiles made from aluminum, non-ferrous metals, plastics, and steel up to 3 mm wall thickness – brand new. CNC control system based on Windows® with 3D color graphics and simultaneous machining capabilities. Iedpfx Ahjx N T Dbe Njtb Maximum machining length: 3,000 mm Maximum clampable profile length: 3,700 mm Machining of longer profiles possible Maximum profile cross-section: 200 x 180 mm Milling spindle drive power: 4.5 kW (optional 8 kW) Tool holder: SK30 (optional HSK40 / HSK63) Milling spindle speed: 120 to 24,000 rpm Space requirements including mobile control panel and rear safety fence: approx. 5.5 m x 3.1 m x H 2 m Weight: approx. 1,500 kg - Covered tool magazine for six tools - Automatic tool length measurement - Automatic front door - Rear workspace safety with protective fence and access door - 6 pneumatic clamping bridges - 2 longitudinal stops (left and right) - CNC control system based on Windows® with 3D color graphics and simultaneous machining

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, CNC Control: Professional 5 (FANUC) X travel (mm): 550 Itsdpfx Ahexmgcpo Njb Y travel (mm): 1,000 Z travel (mm): 500 B axis (mm): 150 C axis (degrees): 360,000 Number of pallets: - Table dimensions (mm): ø500 Table load capacity (kg): 350 Cutting feedrate X, Y, Z (mm/min): 32,000, 40,000, 40,000 Rapid traverse max. X, Y, Z (m/min): 48, 50, 50 Spindle speed (rpm): 14,000 Spindle power (kW): 18.5 / 15 Taper type: HSK63 Torque (Nm): Magazine type: Chain Magazine capacity (positions): 317 Max. tool diameter (mm): 90 Max. tool diameter with adjacent slots empty (mm): 140 Max. tool length (mm): 300 Max. tool weight (kg): 8 Coolant tank capacity (l): - Through spindle coolant (bar): yes Equipment: Rotary table with digital measuring system Work light Through spindle coolant Electronic handwheel Dimensions: Length (mm): 2,771 Width (mm): 3,948 Height (mm): 3,264 Weight (kg): 12,400

Condition: used, Year of construction: 2012, operating hours: 44,900 h, functionality: fully functional, machine/vehicle number: 16504, Equipment: chip conveyor, Pallet changer: -> included Spindle: -> HSK63 tool holder -> Speed 20,000 rpm Linear axes: -> X-axis 750 mm -> Y-axis 750 mm -> Z-axis 725 mm Tool changer: -> 60 stations This machine used a single cooling unit together with another machine (lot 2770012). The cooling unit (lot 2770249) is offered separately. This machine does NOT include a cooling unit. The machine/plant does not include any product-related tools, fixtures, or grippers (robots). Spindle hours approx. 25,600 Itodpfxjx Him Ho Ah Nob Operating hours approx. 44,900

Condition: used, Year of construction: 2011, operating hours: 50,500 h, functionality: fully functional, machine/vehicle number: 16520, Equipment: chip conveyor, Pallet changer: Itedjx Himtepfx Ah Nsb -> included Spindle: -> HSK63 tool holder -> Speed 20,000 rpm Linear axes: -> X-axis 750 mm -> Y-axis 750 mm -> Z-axis 725 mm Tool changer: -> 60 stations This unit shared a single cooling unit with another device (lot 2770012). This unit does NOT include a cooling unit. The machine/system does not include product-specific tools/fixtures or grippers (robot).

Condition: used, Year of construction: 2013, operating hours: 45,500 h, functionality: fully functional, machine/vehicle number: 16546, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Pallet Changer: -> Included Spindle: Isdpfxox Hilvj Ah Netb -> Tool holder: HSK63 -> Speed: 20,000 rpm Linear Axes: -> X-axis: 750 mm -> Y-axis: 750 mm -> Z-axis: 725 mm Tool Changer: -> 60 positions This machine is equipped with a coolant filtration system with chiller. • Manufacturer: KNOLL Maschinenbau GmbH / HYFRA Industriekühlanlagen GmbH • Model: PF 210 (Knoll) + TRK30-EF-S (Hyfra Pedia) • Year of manufacture: 2012 • Serial numbers:  - KNOLL: 501973 / 201139433  - HYFRA: 12030089 • Electrical connection: 3×400 V / 50 Hz • Control voltage: 24 V DC • Power consumption: 11.1 kW (Knoll) + 4.8 kW (Hyfra) • Fuse protection: 16 / 25 A (Knoll), 16 A (Hyfra) • Cooling capacity (chiller): 3.8 kW at 42 °C • Refrigerant: R134a, 1.6 kg • Max. pressure: 20 bar • Weight (with coolant): 140 kg Note: Machine/asset does not include any product-related tools, fixtures, or robot grippers. Spindle hours: approx. 9,300 Operating hours: approx. 45,500

Condition: used, Year of construction: 2019, Leadwell Vertikal Flerop BC-700T Fanuc 0i-MF controller with 10.4" LCD Chip conveyor + bucket Transformer Without linear scale Pallet package CTS function Air gun / Water gun HSK63 tooling system 12000 rpm spindle CE4 20 bar high pressure pump Automatic workpiece measurement OMP-60 Auto tool length measurement NC-4 Oil skimmer Itodpjx Hfx Ssfx Ah Neb Auto door Network connection Spindle coolant ring X axis: 1300mm Y axis: 610mm Z axis: 610mm vertical / 750mm Horizontal Distance from table top to spindle end : 110-750mm Table LXW: 1480x610mm 600mm rotary table C Axis speed: 120-800Rpm Tool storage capacity: 30pcs

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) 4 axis Goose-neck type Numerical Control Power Control PC85 - Software woodWOP Safety cabin (enclosure) of the working head Working table with pods and rails- No. 10 Support rails (lenght mm 1500) LASER system on X-axe for the rails positioning and on Y-axe for the vacuum pods positioning Itedpfx Aher Ai Sqs Nob Automatic Tools Changing System No. 2 Tools storage plates W8 (No. 8 folds) + (No. 3 folds) Max. useful working area (X - Y - Z) mm 6000 x max mm 1600 x mm 125 No. 4 Working areas - 2 x Vacuum pump (capacity m3/h) Separate electric and command cabinet Total installed power (Kw) 27,5 (ca.) WORKING GROUPS (TOP): No. 21 Independent vertical boring spindles (High Speed 7500) No. 10 Independent horizontal boring spindles (No.6 in X-axe + No. 4 in Y-axe) Drilling head motor-power (Kw) 2,3 Circular Grooving Saw (tiltable 0°- 90°) diam. (mm) 125 (N1 X-Y 90°) No. Vertical electro-spindle: HSK63 Vertical electro-spindles motor power KW 9

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) 4 axis (5 axis with FLEX 5) Gantry-drive (axe X) machine Numerical Control Control Powertouch (PC85) Software woodWOP Safety cabin (enclosure) of the working head Working table with pods and rails Mod. K-Table Support rails (No.) 8 Table dimensions (mm) 1340 Automatic deplacement by CNC (X axis) of the Supports rails LED system (on the rails) for the vacuum pods positioning Clamps for workpieces fixing - POWERCLAMP Automatic Tools Changing System Tools storage plate (No. of folds-positions) 18 Max. useful working area (X - Y - Z) mm 4000 x mm 1550 x mm 60 Max. useful working area (X - Y - Z) in edge banding (mm) 4000 x mm 1500 x mm 60 No. 2 Working areas - Vacuum pump (capacity m3/h) 100/140 Separate electric and command cabinet Motorized carpet to evacuate chips and wastes Total installed power (52 A) WORKING GROUPS (TOP): No. 17 Independent vertical boring spindles (High Speed 7500) No. 4 Independent horizontal boring spindles (No.2 in X-axe + No. 2 in Y-axe) Drilling head motor-power (Kw) 2,2 No. 1 Vertical electro-spindles HSK63. Vertical electro-spindles motor power (KW 15) No. 1 Edge Banding head on board (axe Y) Power Edge, Glueing Unit (Hot Melt + Quick Melt Unit) Edges (tape) thickness in rolls (min/max) mm 0,4 - 3 Edge coils supporting unit (N. 1 reels/Coils) Pre-End cutting unit Crosshead aggregate (4 horizontal drilling spindles) N° 1 Circular saw aggregate (diam. mm 125) Itjdpfxew Dc Nie Ah Neb Combined aggregate (Flush-Trimming/Scraping)

Condition: good (used), Year of construction: 2000, machine/vehicle number: 13639, Control Heidenhain X-Way 1,200 mm Y-way 800 mm Z-way 500 mm Main spindle: Speed 16,000 rpm Drive power - main spindle 17 kW Spindle Tool holder Type HSK63 Spindle diameter in front. Bearing 70 mm Upgraded Tool changer Size: 100 Swing round table: Round table diameter 800 mm Swivel range A: -15 / + 97° rotatable C: 360° max. table load approx. 1,000 kg max. tool diameter 80 mm max. tool byway. with free neighbor box. 125 mm max. tool length 300 mm max. tool weight 8 kg Feeds: Rapid response ( X / Y / Z ) 30 m/min Total power requirement 31 kVA Machine weight 15 tons Space requirements approx. 6.0 x 5.0 x 3.6 m Itsdpfx Asinh Rqoh Neb other equipment - Documentation - Chip conveyors - electronic heat compensation Y- + Z-axis

Condition: ready for operation (used), Year of construction: 2014, General Data Machine weight 5900 kg Control Unit Brand HEIDENHAIN Model TNC640 Main Drive Spindle speed range 24000 Tool taper HSK63 Number of axis 3 Movement X-Axis Movement 650 mm Y-Axis Movement 520 mm Z-Axis Movement 475 mm Itjdpjx D Dyyefx Ah Nob Tools Slots in storage 30 Type of tool holder SK40 Additional Equipment Chip Conveyor Belt Filter System Replaced Main Spindle optional: Pallet changer LANG Eco Compact 20 (2018) with tool measuring system / 20 LANG vices / Toolsetter OTS This 3-axis DMG MORI DMC 650 V was manufactured in 2014 and features a spindle speed of 24,000 rpm, a 30-fold tool changer, and a HEIDENHAIN TNC640 control system. It includes a chip conveyor, belt filter system, and optional LANG Eco Compact 20 pallet changer with a tool measuring system. Weighing 5,900 kg, the DMG MORI DMC 650 V machine we have for sale represents a robust addition to any machining fleet. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2008, Control Unit Brand SIEMENS Model 840D Powerline Main Drive Number of axis 4 Iedpfxsx D Hl Eo Ah Njtb Tools Type of tool holder HSK63 Additional Equipment Pallet changer: RS4 Tool magazine: Omron This 4-axis DECKEL MAHO DMC 70H duoBlock was manufactured in 2008. A robust horizontal machining centre, it offers advanced capabilities for complex machining tasks. Consider the opportunity to buy this DECKEL MAHO DMC 70H duoBlock horizontal machining centre. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2016, Control Unit Brand OKUMA Model OSP-P300S-H Iedpfx Ahox D R Uws Njtb Movement Y-Axis Movement 160 Additional Equipment Y-Axis Machining Kit: Helical interpolation /Y-axis turning function with offset turning toolholders/ Coordinate conversion /Double pressure clamping system for main spindle chuck via M-codes (irreversible) /Double pressure clamping system for sub-spindle chuck via M-codes (irreversible) 60 tool ATC / High-pressure coolant preparation: 70 bar/ External coolant pump: 0.8 kW, 6 bar, 20 L/min/ Electric spindle orientation /Air blast for chuck cleaning Collision Avoidance System (CAS)/Chip Conveyor Preparation/Big Bore Spindle ASA 6": 22/15 kW, 3800 rpm/ High-precision C-axis positioning/ Continuous B-axis/ Tool Magazine with 60 positions/ 0.1 Micron Resolution Software/ API Library 2 for OSP-P300S/ Standard Right Side Chip Conveyor/ 15 Bar Coolant Pump 20 L/min/ Filtration unit with 4 fabric filter bags (25 micron), pump 15 bar, 20 L/min SCHUNK ROTA THW+260-81R A8 chuck with KITAGAWA SS1770 cylinder for Big Bore main spindle SCHUNK ROTA THW+215-66 A6 chuck with KITAGAWA SS1452 cylinder for sub-spindle 5-Axis Machining Kit: Super NURBS on 5 axes /Vector control /DNC-DT interface /Tool position control/ 3D coordinate transformation /Helical interpolation (includes inclined plane profile software) This 5-axis OKUMA MULTUS B300 II W was manufactured in 2016. It features an ASA 8 spindle offering 5,000 rpm and 65 mm bar capacity, capable of handling a max turning diameter of 630 mm. It includes a high-pressure coolant preparation of 70 bar, a continuous B-axis with HSK63, and a tool magazine with 60 positions, optimizing both turning and milling capabilities. If you are looking for high-quality turn-mill operations, consider this OKUMA machine. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2004, operating hours: 36,700 h, Control Unit Brand SIEMENS Model Sinumerik 840D Powerline Main Drive Iedpfx Asx D Npgoh Netb Number of axis 5 Movement X-Axis Movement 1250 mm Y-Axis Movement 880 mm Z-Axis Movement 800 mm Tools Type of tool holder HSK63 Additional Equipment Infrared Scanner Tool Measurement Flushing Gun Internal Coolant Supply (IKZ): 40 bar Tank with Paper Belt Filter: 900 litres This 5-axis DMG GILDEMEISTER DMC 125U universal machining centre was manufactured in 2004. Ideal for complex and precise machining tasks, it offers enhanced flexibility and performance. Consider the opportunity to buy this DMG GILDEMEISTER DMC 125U universal machining centre. Contact us for more information. Application Types Milling

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 4 kg, drill diameter: 150 mm, For sale is a new spindle tool for Ø68-150mm. Specifications: Spindle range – Ø: 68-150mm Fine boring head height: 71mm Holder: SK40 DIN 69871 (LBK6-115) Spindle length: 95mm plus fine boring head Total spindle depth: 166mm Indexable insert: TCMT110204 (3 pieces) Ijdpfx Aex Iwnuoh Netb The price includes inserts, fine boring head, and holder. Other spindle tools or holders (SK50, HSK63) available on request. Spindle tools for other diameters available on request.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 46,810 h, functionality: fully functional, machine/vehicle number: 11450000153, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, total height: 3,393 mm, overall weight: 11,670 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 46,160 h, number of spindles: 1, number of slots in tool magazine: 60, Equipment: chip conveyor, Horizontal tool changer with double gripper 100-position tool magazine HSK63 Coolant tank 600 l Chip conveyor Rotating viewing window 3D path control Millplus IT NC rotary table Ø 1100 mm x 900 mm, load capacity up to 2000 kg Motor spindle HSK-A63, spindle speed up to 18,000 rpm Universal milling head Tool holder Tool magazine Heidenhain TS641 touch probe Electronic handwheel Oil and emulsion separation system High-pressure coolant system Spray gun with pump Axis travel X/Y/Z each 1000 mm Ijdpfx Aow A Nimeh Netb Rotary table 0-360° (C-axis) and swiveling head -10 to 180° (B-axis) Laser for tool measurement Chain magazine with 60 tool positions Band filter system with 980 liters Chain magazine 1.9 tons Repairs 2022: - Replacement of the spindle at 34,661 operating hours Repairs 2019: - Replacement of X/Z sliding plate including guides of the Z and X axes - Replacement of ball screw drive of the Z axis Defect 2025 - A hose has a crack (see picture in the gallery). Depending on further use, we can repair this if needed. Hour meter 1: 117,755 h Hour meter 2: 46,810 h

Condition: excellent (used), FANUC 310 is-A Control Working travels 730 x 730 x 650 mm Tool changer with 60 Positions Spindle speeds 50-12'000 rpm Spindle taper HSK63 2 paletts 500 x 500 mm B-axis 0.001° Cooling through spindle 3D measuring taper Tool breakage control device Tool lenght measuring device Chip conveyor Misc. accessories Itedpsx A E Ayofx Ah Nob MARCELS MASCHINEN AG

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: N1A665853, tool weight: 30,000 g, input voltage: 400 V, Machining center Rumba -4 axes Machining length 4000 mm Ppsbtxbqohywz So H Ijr CNC controlled machining center with vertical machining spindle, suitable for machining extruded aluminum profiles, light metals, PVC and steel from 3 sides. Controlled tilting work table: -90°/0°/+90° with intermediate angles. The machine is equipped with a 4Kw, 18000 rpm electrospindle, controlled by an inverter and a quick tool changer (tool changer) with an ISO30 spindle. Interpolation of the X, Y, Z and W axes controlled numerically. Brushless motors for positioning the X, Y, Z and W axes. Complete with 4 pneumatic double clamps, tool diameter correction by software. Axis movements on linear guides. Left profile stop. 10.4-inch color monitor (touch screen with simplified Windows-based graphics, Teamviewer for remote maintenance, special software HICAM 2 / CAMPROX for loading ISO files and running programs). Possibility to edit longer parts. Standard equipment: Itjdpjwgm Ibefx Ah Njb 4kw ISO30 electrospindle 4 pneumatic clamps (manually adjustable) Safety cover Automatic tool changer (10 tools) 4x ISO30 cone included with the tool 3x chip collection compartments air nozzle Technical data: X-axis stroke 3000 mm / 4000 mm Y-axis stroke 400 mm Z-axis stroke 300 mm Rapid traverse (X, Y, Z): 50 m/1' Acceleration (X, Y, Z): 1.5 m/s2 Electric spindle: 6.6 kW HSK63 Spindle cooling: Air, liquid cooling Max. tool length: 130 mm Max. tool diameter: 140 mm (blade) Working pressure: 7bar Weight: 2500kg