Used Hotmelt for sale (176)

Condition: excellent (used), Year of construction: 2004, Perfecta Bookline S Age: 2004 Counter: 65.000 Books Size: 45 x 27 cm Speed: up to 1800 books/ hour • 5 clamps Klodpfx Ahjv T I R So Nsl • hand-feeding station with jogger • spine preparation with exhauster • hotmelt spine and side glue • premelter • coverfeeder (toploading), with scoring • Compressor Available immediately

Condition: good (used), Year of construction: 1996, functionality: fully functional, Bobst Domino 145 II Matic Year 1996 Longitudinal seam Automatic bottom (3-point) 4/6-point gluing Cold glue system by Valco, year 2019, with 5 nozzles Hotmelt glue system by hhs-Xmelt, year 2017, with 3 nozzles Handle dispenser Kjdpfx Aox Aryfoh Noll CoroPack 125 Bobst included, year 1996 – electronics are new.

Year of construction: 2010, condition: used, Case maker Kolbus DA 270 Year: 2010 For fully automatic production of book cases, files, display cards, calendar backs or game boards. Description: - Automatic setting - Motorised setting - Automatic case counter - Board pre stacking conveyor: 1700 mm - Board cutter: PS - Centre strip infeed (flexible) - Waste chopper - Cloth feeder: Non-Stop - Glue unit Kljdpfx Aex Ary Eoh Nsl - Preheated glue tube - Viscosity control - Device for inside lining with hotmelt - Device for producing padded cases - Pressing station - Stacking delivery Max. mechanical speed: up to 65 cycles/min Size range opened case (max): 670 x 390 mm Size range opened case (min): 205 x 140 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 2011, Perfect binding line Kolbus KM 600 Year: 2011 Consisting of Gathering machine Kolbus ZU 804 Description: - Hand feeding station - Number of gathering stations: 20 - Optical sheet control: Sygna-Lynx - Air center: Becker - Set up element - Reject gate for incomplete products Perfect binder Kolbus KM 600 Product counter: approx. 12.800.000 Description: - Semi automatic setting - Co-Pilot with touch screen - Number of clamps: 21 - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375 - Base for side glue system - Hotmelt side glue unit, interchangeable - Cover feeder: RA 49.A - 1st nipping and pressing station Kodpfx Aex Ahl Dsh Nell - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus - Transport system, length (approx): 20 mtr - Escape delivery Three knife trimmer Kolbus HD 143.P Year: 2011 Product counter: approx. 12.570.000 Description: - Co-Pilot with touchscreen - Infeed conveyor from the right - Automatic hopper feeder for inline production - Cut counter - Product counter - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set) In the photos, you can also see a side stitching unit. This type of side stitching is mainly required for the production of school books in the Middle East. This unit is not included in the offered price but is available at an additional cost on request.

Condition: excellent (used), Year of construction: 2019, Ref: 11036 . 2019 Peroni Ruggero AGD EIM Semi-automatic machine to thread and glue one flat elastic band onto hard cases. Features: For one single elastic width (5 mm up to 15 mm) Klodpfjxx Uwrjx Ah Nel Meler hotmelt glue system Materials:- flat covers of diaries, notebooks, planners etc Specification: Cover thickness: min. 1 mm – max. 2,5 mm (3,5 mm for foam board cases) Min case size: 100mm x 220mm Mechanical speed: up to 8pcs/min Electrical power required: 4 kW – 220 V – 50Hz Pneumatic consumption: 80 Nl/min. Overall dimensions: 1500 mm x 900 mm x 1350 mm (h)

Condition: used, Year of construction: 2004, functionality: fully functional, Single-clamp hotmelt perfect binder complete with: automatic cover feeder Kljdpfx Ahjxdm Exo Nsl

Condition: used, Year of construction: 1995, Perfect binding line Wohlenberg Master 6501 Year: 1995 Consisting of Gathering machine Wohlenberg Sprinter 7010 Kljdpfxjtt Ug Is Ah Nol Description: - Hand feeding station - Number of gathering stations: 16 - Optical sheet control: WST (total 4 of 24) - Excluding pump(s) - Machine was connected to a centralised air system - Set up element - Transfer into the binder Perfect binder Wohlenberg Master 6501 Description: - Number of clamps: 18 - Milling and roughening station - Dust extraction system - Hotmelt spine glue unit with integrated pre-melter - Hotmelt side glue unit with integrated pre-melter - Gauzing station - Rotary cover feeder - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device Transport system - Transport system vertical, length (approx): 30 mtr - Escape delivery Description modified on 14-04-25

Year of construction: 2020, condition: like new (used), functionality: fully functional, working width: 1,200 mm, machine/vehicle number: 3908088, Machine can be inspected under power !!! This multipurpose coating machine with a hotmelt laminating and coating unit is highly versatile. Kjdpferrd Dlsx Ah Noll The combination of an engraving roller system with a multi-roller system creates unprecedented flexibility in production, enabling the user to switch quickly and easily between the different application systems without having to accept longer production downtimes. The system is used for the production of duplex and triplex laminates using thermoplastic and reactive hotmelt adhesive systems. (detailed product description - see AB under Documents) Installation/commissioning and instruction by the manufacturer possible - machine was previously only used in the showroom

Condition: excellent (used), Year of construction: 2016, Ref: 11023 . 2016 FKS Printbind KB-4000 PUR Single clamp PUR binder with nozzle system designed for minimal glue waste. Equipped with: Touch screen display Batch counter Kjdpfexu Np Uex Ah Njll PUR slot nozzle application system EVA hotmelt side gluing Automatic pre clamp unit Milling, notching and micro-notching Specification: Minimum book size: 140 mm (H) x 140 mm (W) Maximum book size: 380 mm (H) x 290 mm (W) Min / Max book thickness: 1 mm - 40 mm Max speed: 120 books / hour.

Condition: used, Packaging line for wine / sparkling wine consisting of: - Carton erector Bortolin with Nordson hotmelt unit - Packer Bortolin (upright packaging for 20 cl / 75 cl wine & sparkling wine and horizontal packaging 75 cl sparkling wine) Kledpfxsxyt Ekj Ah Nol - Carton weigher = Sautelma Minismart - Carton sealer Bortolin with Nordson hotmelt unit including the conveyor belts between the machines. The line will be in operation until 20 December and will then be uninstalled.

Condition: used, Year of construction: 2011, Perfect binding line Kolbus KM 412.B Year: 2011 Consisting of Book block feeder Meccanotecnica XMT Year: 2011 - Infeed conveyor from the right Gathering machine Kolbus ZU 841.B Year: 2011 Description: - Hand feeding station - Universal base: 18 - Number of gathering stations: 18 - ATC thickness control - Optical sheet control: SignalLynx Card gluer Kolbus KK 841 - Hotmelt glue unit: Nordson Problue - Air center: VariAir central system - Reject gate for incomplete products: AS 841 - Set up element Kledpfsxuad Aox Ah Nel - Intermediate element with vibrating - Transfer into the binder Perfect binder Kolbus KM 412.B Year: 2011 Description: - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - Cold glue spine gluing, interchangeable - Intermediate drying station (infrared) - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson XNO 962 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: LH 375.A - Gauzing station - Heating elements in curve: IR - Stream cover feeder: SAL 413.B - Scoring station: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE Description: - Transport system, length (approx) - Escape delivery Conveyor tower Three knife trimmer Kolbus HD 153.P Year: 2011 Product counter: 148 mio Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Book stacker Kolbus (RIMA) XRS 130 Year: 2011 Description: - Compensating stacker - Delivery to the left and right

Condition: used, Year of construction: 1995, Perfect binder Wohlenberg Master 6501 Age: 1995 Description: - Number of clamps: 18 - Milling and roughening station - Dust extraction system Kjdpfx Ahext Evhs Nell - Hotmelt spine glue unit with integrated pre-melter - Hotmelt side glue unit with integrated pre-melter - Gauzing station - Rotary cover feeder - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device Max. mechanical speed: up to 6.500 cycles/h Maximum size range: 430 x 320 x 62 mm Minimum size range: 140 x 105 x 2 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: ready for operation (used), Year of construction: 1993, Machine number 135 Built in 1993 Size max 510 x 290 x 65 mm min 125 x 100 x 3 mm Book block thickness max 65 mm min 3 mm Speed max 10.000 c/h Equipment: • 24 stations gather • book bloc feeder • endsheet tipping unit • 32 Clamps • milling and roughening station • hotmelt spine glue station • hotmelt side glue station • cold spine glue station • Kolbus HL Premelter • Nordson Premelter • Nordson Premelter Klsdpfxexykdqs Ah Njl • Slauterback Premelter • stream Cover Feeder • 2 pressing stations • laydown delivery • Cooling Tower • Kolbus Transport Conveyor w/ All Associated Conveyors • Controls • Large Assortment of Spare Parts

Condition: used, machine/vehicle number: 005637, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Combination Squaring Edgebanding Machine: First Pass Max Panel Width: 1300 mm Max feed speed: 50 m/min Operating Units Right Side: 11 nr Ksdpfsvw Ev Hex Ah Nell Operating Units Left Side: 12 nr

Condition: used, machine/vehicle number: 008105, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Kodpfxjw Idgps Ah Nell Grooving Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: used, machine/vehicle number: 008018, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Klodpjwv Dfcsfx Ah Nsl Max feed speed: 20 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, machine/vehicle number: 008125, Type of edging: Thin edge, Thick edge Ksdpfew Tivmox Ah Nell Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Operating Units: 9 nr

Condition: good (used), Year of construction: 2012, functionality: fully functional, CNC machining center with edge banding for shaped workpieces Working dimensions for Y1 axis: X axis: 4,300 mm X axis pendulum operation: 1,620 mm Y axis: 1,320 mm Working dimensions for Y2 axis (edge processing): X axis: 3,300 mm X axis pendulum operation: 600 mm Y axis: 1,240 mm Work table: 8 ATS workpiece supports with 3 vacuum cups each 8 rear workpiece stops, program-controlled lowering, each mounted in one support 8 workpiece stops, 670 mm from rear, each mounted in one support 2 + 2 lateral workpiece stops 4 removable center stops 6 lift rails, pneumatically program-controlled lowering, for positioning heavy workpieces Automatic positioning of workpiece supports and vacuum cups via EPS (Electronic Positioning System) Automatic central lubrication Vacuum system divided into 2 separate work zones along the X axis Vacuum assist system for clamping templates Chip conveyor integrated into the machine table Vacuum pump 90 cbm/h Processing head equipment: Mounted on Z2 axis Drilling head BH 26 2L with: 16 vertical drilling spindles, individually selectable 2+2 horizontal drilling spindles in X direction 2+2 horizontal drilling spindles in Y direction Grooving saw, diameter 120 mm, fixed in X direction Grooving saw, diameter 120 mm, fixed in Y direction Milling spindle 13.2 kW (11 kW in S1 operation), HSK 63 F Mounted on Z1 axis Speed range 1,000 – 24,000 rpm Clockwise and counter-clockwise rotation C axis 360 degrees for adapter units Cleaning nozzle for cleaning the milled edge before the edge banding process Tool magazine for 16 tools Edge banding unit for workpieces up to 60 mm thickness Edge banding unit CNC controlled, with 360 degree endless rotation Glue application for hotmelt adhesive Double pressure roller, interchangeable and can be switched off Heating lamp for preheating edge band material End trim unit to cut the edge band material at an 8-degree angle to the workpiece edge using circular saw blade Technical data: Plastic edge thickness 0.4 – 3 mm (*) Solid wood edge thickness 0.4 – 2 mm (*) (Best results achieved using wood edges with primer from 0.4 – 1.2 mm) Max. edge height 64 mm Panel thickness min. 14 mm, max. 60 mm Min. inside radius 18 mm for edge thickness less than 1 mm Min. inside radius 30 mm for edge thickness 2 mm Min. panel size for edge banding: 300 x 300 mm Min. size for edge banding of internal cutouts: 350 mm, with plastic edge max. 1 mm thickness and max. panel thickness 18 mm Edge magazine for 2 rolls, positioned outside the machine—this solution limits pendulum processing. Roll diameter for edge material: 800 mm Safety equipment: * Safety mats in front of the machine * Safety fence on the right with access door Without tools Control system: PC control with BIESSE WORKS ADVANCED Restart after emergency stop BIESSE WORKS office version Units: Ksdpfx Aexraimeh Nsll - Flush/radius trimming unit - Combination profile/flat scraper unit - Sawing unit

Condition: used, machine/vehicle number: 005639, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Corner Rounding Unit: yes Combination Squaring Edgebanding Machine: First and Second Pass Max Panel Width: 3000 mm Max feed speed: 50 m/min Operating Units Right Side: 12 nr Operating Units Left Side: 12 nr Klodpfx Aovw Evgoh Nel

Condition: used, Year of construction: 1996, functionality: fully functional, type of input current: three-phase, Equipment: clamp, compressor, 4-clamp perfect binder Book spine gluing with hotmelt Side gluing with hotmelt Milling unit incl. extraction Minimum paper size: 75 - 320 mm Cover thickness: 80 - 400 g/sqm Book thickness: 1 - 40 mm Ksdpfx Aexvqw Aoh Nsll Max. output: 1,100 copies/h

Condition: good (used), Traypacker / wrap arround packer Trays and wrap-around boxes minimum packaging size L x W x H = 190 x 140 x 80 mm Kedpfsfxypiox Ah Njll maximum packaging size L x W x H = 460 x 350 x 250 mm 4 lane machine Hotmelt machine was rebuild in 2018 siemens s7 plc controlled easy format change as-is or adjusted to customer needs

Condition: good (used), Year of construction: 2009, functionality: fully functional, Perfect binder with clamp, hotmelt gluing, manual cover feeder, with mobile base, binding length: max 310 mm, book thickness: max 60 mm, output: up to 320 books/h, max format: 320 × 310 mm, weight: 186 kg, 230V power supply. Klsdjxt Nywjpfx Ah Nel

Condition: used, Year of construction: 2005, functionality: limited functionality, machine/vehicle number: IMW 330, For Sale: Mariani IMW 330 Cartoning Machine (2005) High-quality Mariani IMW 330 fully automatic cartoning machine, originally supplied for Elopak UK / Princes Soft Drinks Manchester. Suitable for multipack trays (2×3 or 2×6 configuration), this unit forms, loads, and seals cartons using hotmelt adhesive. Complete servo-driven system with Siemens S7 PLC, ESA VT170 HMI, and Nordson ProBlue glue interface. Technical data: • Model: Mariani IMW 330 • Year of manufacture: 2005 • Power supply: 3×415 V, 50 Hz + N + PE • Installed power: 14 kW • Air consumption: 60 Nm³/h • Noise emission: < 85 dB(A) • Control system: Siemens S7-300 PLC + ESA VT170 touchscreen • Gluing system: Hotmelt (Nordson ProBlue compatible) • Pack configuration: 2×3 or 2×6 • Output: approx. 30–60 cartons per minute (depending on pack format) • Central automatic lubrication • Carton size changeover via HMI recipes • Documentation: Operator, technical, and spare parts manuals (original Mariani) Key features: • Automatic carton forming, loading, and sealing • Servo-controlled diverter and multi-lane infeed • Adjustable hotmelt application (top/bottom/lid) • Quick format changeover with HMI recipe selection • Central lubrication and safety interlocks • Fault diagnostics and production counter Condition and delivery: Klodextp Axjpfx Ah Nol • Complete with electrical cabinet and control system • In excellent working condition, ready for operation • Original documentation included • Custom modifications possible on request (format changes, adhesive unit, guarding or integration into production line) • Location: Netherlands • Price: On request

Condition: refurbished (used), functionality: fully functional, Nordson Problue hotmelt unit equipped with an automatic filling system (Fulfill). This unit comes standard with two hose connections but can be supplied with four hose connections upon request (surcharge €750). The offer includes the unit with the filling system; a suction lance and a hose with container are not included but can be supplied separately. Work safely, cleanly, and with less manual effort using this fully operational hotmelt glue unit. Klodpfx Ahsxtc Twj Nsl

Condition: used, Year of construction: 2011, Sewing machine with inline end sheet tipper Meccanotecnica Universe Year: 2011 For high quality digital print finishing. The UNIVERSE SEWING performs 3 operations in standard mode: Sheet feeding, creasing, folding and collating and stitching. The UNIVERSE performs 2 operations: Nipping and end sheet gluing. Configuration: • flat sheet feeder • pc Siemens with touchscreen Kjdpfou Utzysx Ah Njll • GigaLynx sheet control • folding and collating station • thread sewing machine • belt delivery • transfer to the end sheet feeder • nipping press • end sheet feeder with Hotmelt nozzle gluing and ROBATECH premelter • belt delivery (counter approx. 9.700.000 mio. stitches) Technical specifications: speed plano sheet feeder: up to 300 plano sheet(A4)/min mechanical stitching speed: up to 50 folded sheets/min size range plano sheet max.: 420 x 640 mm size range plano sheet min.: 150 x 200 mm size range folded sheet max.: 420 x 320 mm size range folded sheet min.: 150 x 100 mm number of stitches max.: 10