Used Horizontal Multirip for sale (6,501)

Condition: like new (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 7,000 mm, travel distance Y-axis: 1,210 mm, travel distance Z-axis: 1,850 mm, Manufacturer: FPT Gkodpfxozznupj Agrsd Year: 2007 CNC Control: HEIDENHAIN Axis Travels X-axis: 7,000 mm Y-axis: 1,210 mm Z-axis: 1,850 mm Milling Head / Rotary Axes A-axis: 270° B-axis: -180° / +180° C-axis: 360° The machine is currently installed at our factory in Istanbul, Türkiye and is in working condition. The machine can be inspected under power at our facility. Further technical information, photos and videos can be provided upon request.

Condition: used, Year of construction: 1983, max. wheel diameter 80 / 124 mm gear width 150 mm max. module 2 min. module 0,3 turning speeds 210 - 1680 U/min min. number of teeth 6 total power requirement 2,2 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 2,0 x 1,5 x 1,8 m Top condition. Godpfx Aoz Dk Afsgrekd

Condition: good (used), Year of construction: 2012, functionality: fully functional, Horizontal baling press Dixi 60 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2012 Manufacturer: Dixi Type: Dixi 60 SLD Year of manufacture: 2012 Drive power: 7.5 kW, 400 V / 16.5 A Feed opening: 990 x 1,110 mm (W x L) Pressing force: 60 t Pressing cycle: approx. 47 s Bale size: 800 x 1,100 x 1,200 mm (W x H x L) Bale weight: approx. 370-410 kg Tying: 3-fold, manual Godpfxez A T Dce Agrjkd Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Machine weight: approx. 5,420 kg Material: Paper, cardboard, film Note: The press is in good condition. It has been inspected and tested. A video can be found on our website or YouTube channel. An operating manual is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without warranty.

Condition: used, machine/vehicle number: 17041, Year of construction: 2019, operating hours: 6,573 h, load capacity: 1,200 kg, lifting height: 780 mm, load center: 600 mm, fuel type: electric, mast type: simplex, construction height: 1,400 mm, battery voltage: 24 V, fork length: 1,200 mm, front tire size: , rear tire size: , overall weight: 1,447 kg, enginetype: Electric, manufacturer: Still Serial Number: F21082V00190 Gedpfey Hnhvsx Agrjkd Battery Details: 24V EPzS 620Ah BJ.2025

Condition: used, Year of construction: 2003, x-travel 1250 mm y-travel 500 mm z-travel 500 mm Control Heidenhain tnc 124 serial number 5277 table size 1800 - 360 mm taper ISO 50 weight of the machine ca. 3 t Gedpfoz D Iu Esx Agrokd

Condition: used, Year of construction: 1990, functionality: fully functional, 260 mm Rund documentation vorhanden automatic feeds ja ja weight of the machine ca. 2,2 t Gjdpfx Agoz D Iu Sjrokd dimensions of the machine ca. 1,7 x 2 x 2 m

Condition: excellent (used), Year of construction: 2007, Mori Seiki NH6300 DCG Horizontal Machining Center Installation year: 2007 BT 50 spindle, 10,000 rpm High-pressure coolant through the spindle, 50 bar, with a dedicated paper filter tank 10 pallets, 630 x 630 Continuous B-axis Axis travels: X900, Y800, Z980 180-position tool magazine Tool breakage detection in the magazine Dust extraction system FMS Fastems linear 10-pallet system (5+5) Gedpfxsz Ea Dhs Agrokd 2 loading stations

Condition: used, Year of construction: 2006, operating hours: 6,526 h, functionality: fully functional, machine/vehicle number: SN0575, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, nominal power (apparent): 40 kVA, controller manufacturer: Fanuc, controller model: 16i, total height: 2,800 mm, total length: 4,800 mm, total width: 2,800 mm, table width: 400 mm, table length: 400 mm, overall weight: 10,500 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 6,526 h, spindle motor power: 18,500 W, spindle nose: BT 40, number of spindles: 1, number of slots in tool magazine: 210, Equipment: chip conveyor, documentation/manual, MITSUI SEIKI precision machining center with very few spindle hours, as it was only put into operation in 2017. Matrix magazine with 201 positions. High-pressure coolant system KNOLL 200/1400. Scraper conveyor chip removal system Knoll 450K-1/290. Fanuc 16iMA. Can be inspected while powered on. Gkodpfez R Rcbsx Agrsd

Condition: excellent (used), Year of construction: 2011, operating hours: 1,345 h, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,050 mm, controller manufacturer: Fanuc, overall weight: 21,000 kg, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, x-axis travel 1250 mm y-axis travel 1100 mm z-axis travel 1050 mm spindle speed range 8000 rpm Gksdpfjz H A S Dox Agred spindle drive motor 30/22 kW pallet size 800 x 800 mm machine weight approx. 21 t machine dimensions approx. 5.0 x 8.0 x 4.0 m distance table / center of spindle 200 (100) - 1350 (1200) mm Torque 600 tool taper 50 SK b-axis 0.001 ° table – indexing 90° in 2.5 sec. Control unit CNC Manufacturer of control unit FANUC 31i A

Condition: used, Year of construction: 2007, x-travel 560 mm y-travel 560 mm z-travel 630 mm Control MSX 701 III MAPPS Max. rpm 14.000 min/-1 power capacity - main spindel 18,5 / 11 kW max. Torque 120 Nm tool taper MAS BT 40 distance spindle center to table 80 - 640 mm distance Spindlenose and center of table 100 - 730 mm numbers of pallets 2 size of pallet 400 x 400 mm max. workpiece weight 400 kg max. workpiecediameter 630 mm max. workpiece height 900 mm Gkodpfx Agowbi Adjrjd change time of pallets 6,0 sec b - axis 0,001 ° number of toolpositions 60 pos. tool taper MAS BT 40 max. tool diameter 70 / (140) mm max. tool length 400 mm max. tool weight 8,0 kg rapid traverse ( X / Y / Z ) 50 m/min feed speeds 0 - 50.000 mm/min Tipp feed 0 - 1.260 mm/min total power requirement 35 kVA weight of the machine ca. 9,8 t dimensions of the machine ca. 5,5 x 3,5 x 2,8 m CNC - Machiningcenter Horizontal MORI SEIKI - NH 4000 DCG - pallet-changer - Control options Program restart, cylindrical and spiral interpolation High-speed milling cycles, island and pocket milling cycles

Year of construction: 2022, condition: as good as new (ex-display), 1 semi-automatic high-performance horizontal bandsaw with double column guidance and 2° cutting inclination to the table support surface Make:BEKA MAK Model: BMSY 560 C Technical data: Sawing capacity 90° rectangular 560 x 750 mm Sawing capacity 90° round 560 mm Sawing capacity 90° square 560 mm Sawing capacity 45° rectangular 410 x 560 mm Sawing capacity 45° round 560 mm Sawing capacity 45° square 560 mm Godpfem Rg H Rox Agrjkd saw band size 6000 x 41 x 1,3 mm Band speed, infinitely variable 20-100 m/min. Motor power 4 kW machine dimensions L x W x H 3400 x 1000 x 2050 mm Machine weight 2045 kg Accessories / special features: - Semi-automatic double column band saw - Linear guides - 2° saw cut to table support surface - Infinitely variable cutting speed via potentiometer on the control panel - Hydraulic vice - Hydraulic mechanical saw blade tensioning - Powerful drive motor - Sensitive cutting pressure regulation - Thermal overload protection - Optical height adjustment - Heavy duty gearbox - Coolant device - Feed roller conveyor 1200 mm - Chip brush - 1 pc. Bi-metal saw band - control panel - CE conform IMMEDIATELY AVAILABLE

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350 x 200 saw band length 3375 x 27 x 0,9 mm band speed 18 - 110 m/min table height 940 mm total power requirement 1,5/1,8 kW Gsdsnq Sanjpfx Agrokd weight of the machine ca. 0,61 t dimensions of the machine ca. 1,5 x 1,75 x 1,9 m Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Vice can be moved sideways - Massive, large material support - Automatic cooling Figure is semi-automatic.

Condition: new, cutting diameter 235 mm dimensions of saw-band 2645 x 27 x 0,9 mm cutting width 280 x 190 mm cutting speed 45/90 m/min 120 mm 120 mm 190 mm Impact energy 170 mm connected load frequency 400 Volt total power requirement 1,1 kW weight of the machine ca. 290 Kg Gjdpfx Ajp Scqysgrjkd dimensions 1,2 x 0,8 x 1,2 m Double miter band saw -Miter cuts up to 60° left and 45° right -Vice with quick clamping device -Band tension control -Electr. Automatic cooling

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 870 mm band speed 18 - 110 m/min Control CNC total power requirement 1,5/1,8 kW weight of the machine ca. 0,63 t dimensions of the machine ca. 1,8 x 1,85 x 1,85 m Gjdjd Iipzepfx Agrekd Miter band saw, fully automatic GBS 255 Super VA-I CNC • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gearbox made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • High performance positioning with incremental encoder (CNC) c. • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm.

Condition: new, capacity 90 degrees: round 250 mm capacity 90 degrees: square 210 mm 290 x 210 mm saw band length 2.965 x 27 x 0,9 mm mm table height 940 mm band speed 35 + 70 m/min total power requirement 1,1 / 1,3 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 1,3 x 0,8 x 1,5 m ATTENTION SPECIAL PRICE!!! Double miter metal band saw with: Gsdpfxjd Iip No Agrskd - Belt speed 35 + 70 m/min - Miter cuts up to 60° left and 45° right - Ball-bearing rotary table for quick miter adjustment - Quick-action clamping stick can be moved - Quick release lever - Automatic cooling

Condition: new, cutting diameter 220 mm saw band length 2455 mm table height 850 mm cutting width 230 mm cutting speed 35 + 70 m/min dimensions of saw-band 2455 x 27 x 0,9 mm 90 mm 90 mm 90 x 100 mm 150 Impact energy 150 Air consume per blow 150 x 210 220 mm stroke back stop 210 mm cross-slide 230 x 185 total power requirement 1,2 kW weight of the machine ca. 0,24 t dimensions of the machine ca. 1,2 x 0,6 x 1,7 m SPECIAL PRICE!!! -Miter cuts up to 60° left -Cutting speed 35 / 70 m / min. - Vice with quick release device -Carbide saw band guide -Tape tension control -Electr. automatic cooling Auto-Cut-System = 3 step system -Automatic saw frame lowering via the hydraulic cylinder -Infinitely adjustable feed -with limit switch - rapid lowering of the saw frame from the rest position to the workpiece, then switch to normal saw feed Godpfxod Iip Ue Agrjkd -Manual mode Share of freight costs 85 EUR

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 23800 € 456.96 € Doppelsäulenführung 5200x41x1,3 mm 20-100 m/min 460 mm 460 mm 650x460 mm rund 380 mm, quadrat 380 590 mm 0.55 kW 4 kW 0.12 kW 3100 mm 1000 mm 1800 mm 1520 kg blade brush control panel hydraulic vice hydromechanical blade tension inverter linear way material limit shaft Gjdjwiql Njpfx Agrjkd height adjustment pressure adjustment coolant pump saw blade security switch gearbox 1,2 meter roller table user manual in GERMAN or ENGLISH OPTION: turn table for mitre cuts hydraulic top clamping from above

Condition: new, Year of construction: 2024, neu 2024 6254 prompt, Zwischenverkauf v Italien 15040 € 288.77 € 1 Doppelsäulenführung 3270x27x0,9 mm 40/80 m/min 300 mm 300 mm 350x260 mm rund 210 mm, quadrat 210 rund 110 mm, quadrat 110 830 mm 1.5 kW 1500 mm 1600 mm 1900 mm 590 kg hydraulicvice INCL. ADJUSTABLE CLAMPING PRESSURE saw beam moves up and down by hydraulic cylinder fast descent automatic fast up/down conrolled by feeler pin adjustable pressure according to section and type of material double safety buton for cycle start 2 speeds coolant equipment _CUTTING CYCLE_ Vice locking; Quick bow pull-down hydraulically operated; Blade rotation and cooling liquid start-up; Working pull-down; end of the cutting cycle; Stop of blade rotation and supply of cooling liquid; Gkjdpfx Agowiqndsrsd Quick bow lift-up; Stop of bow upwards movement; vice unlocking if selected. Manufacturer warranty until 31.12.2026 OPTIONS: Roller tables and band saw blades on request

Condition: new, Year of construction: 2026, neu 2026 060216 prompt, Zwischenverkauf v Türkei 20700 € 397.44 € 1 Schwenkrahmen 5200x34x1,1 mm 20-100 m/min 440 mm 440 mm 610x440 mm rund 410 mm, quadrat 410 rund 320 mm, quadrat 250 rund 410 mm, quadrat 410 rund 320 mm, quadrat 285 860 mm 0.55 kW 3 kW 0.12 kW 2800 mm 1210 mm 1870 mm Gedpfx Agewiqtysrskd 1540 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH OPTIONS: Roller tables and band saw blades on request

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 9400 € 181.42 € Schwenkrahmen 2730x27x0,9 mm 35-70 m/min 230 mm 230 mm 240x230 mm 590 mm 0.37 kW 1.3 kW 0.12 kW Gksdpfx Aewiqw Esgrsd 1700 mm 800 mm 1500 mm 530 kg blade brush control panel height adjustment switch hydromechanical blade tension inverter mechanic top clamping material length stop coolant pump saw blade security switch 1,2 meter roller table users manual in GERMAN or ENGLISCH

Condition: used, Year of construction: 2011, Passage width: 3000 mm. Gkjdpewptxlofx Agrsd Passage height: 30 mm. Inlet section to the system: Length approx. 2250 mm. Outlet section: Length approx. 3970 mm. Total length: approx. 10,220 mm.

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 11100 € 213.12 € Schwenkrahmen 3660x27x0,9 mm 20-100 m/min 320 mm 300 mm 320x300 mm 640 mm 0.37 kW 2.2 kW 0.12 kW 1900 mm 850 mm 1300 mm 770 kg Roller material feed with manual adjustable length stop with limit switch blade brush control panel height adjustment bar with limit switch hydromechanical blade tension inverter hydraulic vice coolant pump saw blade Gksdpfxewirhfj Agrjd security switch 1,2 meter roller table users manual in GERMAN or ENGLISCH

Condition: new, neu ca. 10 Wochen ab Auftrags Gedpjwirpvefx Agrjkd Italien 8680 € 167.52 € Schwenkrahmen 3120x27x0,9 mm 35/70 m/min 280 mm 240 mm 370x140 mm rund 225 mm, quadrat 215 rund 140 mm, quadrat 140 830 mm 1550 mm 1400 mm 1900 mm 353 kg manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment

Condition: new, 1000 mm 1000 mm 1200x1000 mm saw band length 11300 x 80 x 1,3 mm table height 790 mm band speed 14 - 60 m/min total power requirement 18 kW weight of the machine ca. 9,0 t dimensions 5,0 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Gkedpfx Agst Eacgsrsd Price on request.

Condition: new, Year of construction: 2025, Premade pouches packaging/filling and closing machine, rotary operation with 6 working positions. Suitable for flat pouches and doypack style pouches. Easy operation through touch screen and SIEMENS PLC, frequency conversioin for speed adjustment, no-pouch- (or no open pouch) no-filling/seal function. Motorized bag width adjustment, oil free plastic bearings, all product or bag contacting parts are made of stainless steel (SS304). Can be used with all kinds of infeed/dosing modules (optional) to pack granulate like products, liquids, pastes, powdes, etc. Suitable for a wide range of film materials like compound/monolayer PE, PP, paper, etc. (please ask for details). Bag infeed vertically with hopper (for flat bags), optionally: horizontally infeed. Sucking unit to open all kind of bags with thinner film material. Suitable for the following bag dimensions: L(100-350)xW(100-210)mm. - Technical specifications: max. speed of the machine in neutral: 45 cycles/minute; power: 380V, 2.5kW; compressed air: 0.6m³, 6bar; machine dimensions: L2214xW1850xH1640mm; weight: 1000kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Gkedpfev Nlmcox Agred Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.