Used Horizontal Bending Machine for sale (84,134)

Condition: used, Year of construction: 1996, grinding length 1.000 mm grinding width 550 mm workpiece height 400 mm table surface area 1.580 x 550 mm table load capacity 950 kg magnetic clamping plate 1.000 x 550 mm x-Travel 1.200 mm table feed 1 - 30 m/min vertical feeds: 1 - 300 mm/min z-axis 470 mm cross feed 1 - 2.000 mm/min dimensions of grinding wheel 400 x 100 x 127 mm grinding wheel speeds 1.500 - 3.500 U/min grinding spindle drive 11,00 kW total power requirement 23,00 kW weight of the machine ca. 7,50 t dimensions of the machine ca. 4,50 x 3,20 x H2,90 m Coolant system with coolant pump integrated in the hydraulic tank, Iodpfxjxx A Dms Ah Noal exhauster.

Condition: good (used), Bending tool, die, upper blade, upper tool, upper jaw, claw bar -Tool for swivel bending machine -Pointed tool -Dimensions: 45 x 120 mm Iodpfjb A Swlex Ah Nsal -Length: 800 mm -Weight: 19 kg

Condition: good (used), Year of construction: 1990, Type RHM III 120 v-1000 Roll diameter: 120 mm Working length: 1000 mm Sheet thickness: up to 5.0 mm 400 Volt Kramer Maschinenbau GmbH Iaedpfxjx Niu Nj Ah Nsl Description The features described for the RH II series also apply to the RHM III series. These round bending machines are designed for continuous operation under maximum load. The lower shaft is adjustable via a worm gear. For models RHM III 90 – RHM III 130, the geared brake motor is flange-mounted on the outside, while models RHM III 140 to RHM III 180 are equipped with an internally flange-mounted geared brake motor. All motorized machines come standard with electrical safety control. Operation for forward and reverse is carried out using a double footswitch. Additional features on type RHM III: ▪ Powerful thermally protected geared brake motor ▪ Electrical safety control ▪ Convenient double footswitch for forward/reverse ▪ Three-shaft drive (particularly recommended for thin sheet work) ▪ Drive system with two operating speeds ▪ Overload protection via slipping clutch ▪ Motorized rear shaft adjustment ▪ Motorized lower shaft adjustment Standard equipment: ▪ Gear side drive ▪ Three-shaft construction ▪ Asymmetrical shaft arrangement ▪ Upper shaft can be swung out to the front ▪ Adjustment of lower and rear shafts via handwheel ▪ Conical bending by tilting the lower and rear shafts ▪ Initial bending capacity equals round bending capacity Optional equipment: ▪ Device for conical rolling ▪ Upper shaft with grooved edge ▪ Lower and rear shafts with wire groove ▪ Surface-hardened shafts ▪ Ground shafts

Condition: used, total length: 7,500 mm, total width: 2,500 mm, What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Machine available from: 2026-01-05 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Iedpsx Nigxsfx Ah Njal Glenn Smeets

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, overall weight: 14,000 kg, working height: 1,000 mm, sheet thickness aluminum (max.): 3 mm, working length: 2,160 mm, TECHNICAL DETAILS Maximum bending length: 2,160 mm Maximum sheet thickness (steel, 400 N/mm²): 2.0 mm Maximum sheet thickness (stainless steel): 1.5 mm Maximum sheet thickness (aluminum): 3.0 mm Minimum bent part length (without corner pieces): 260 mm Minimum bent part length (with 30 mm corner pieces): 450 mm Minimum bent part length (with 50 mm corner pieces): 500 mm Maximum external bent part width: 1,500 mm Minimum internal bent part width: 150 mm Maximum bent part height (four-sided): 203 mm Lateral clearance at the corner pieces: 30/50 mm Clearance in front of upper beam tool: up to 60 mm Bending beam swivel range: 180 degrees Working height: 1,000 mm MACHINE DETAILS Dimensions & Weight Iasdpfox Ngpkox Ah Nol Dimensions (L x W x H): 5,350 x 7,300 x 2,450 mm Approx. weight: 14,000 kg Maximum drive power: 25 kW Note: The vacuum stacking unit, neck and thread cutting device, and welding fixture visible in the images are not included in the scope of delivery or sale.

Year of construction: 2018, condition: ready for operation (used), Control Unit Brand HAAS Main Drive Spindle speed range 2400 rpm Spindle motor power 40 hp Number of axis 2 Tail Stock Pinol tool taper MT5 Iaodpfx Asx D I Uboh Njl Media Chip conveyor Yes Additional Equipment Line Filter & Surge Suppressor – 220 VAC, 3-phase, 80 A, 60 Hz Early Power-Failure Detection Module Belt-Type Chip Conveyor This HAAS ST-40 was manufactured in 2018. It features a 15-inch chuck, a maximum part swing of 35.5 inches, and a cutting diameter of 30 inches. The machine includes a 2-speed gearbox spindle, capable of 2,400 rpm, and a 12-station BOT turret. Additional equipment includes a belt-type chip conveyor and a programmable servo tailstock. Consider the opportunity to buy this HAAS ST-40 horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: new, Year of construction: 2025, - Capacity 700 x 3.5 mm - Roll diameter 90 mm - Possibility for conical rolling Isdpfoq H D Uajx Ah Njal - Swiveling upper roller - Brake motor - Foot control - Emergency stop - Documentation - 400V

Condition: good (used), Ring bending machine, profile bending machine, bending machine, pipe bending tool, pipe bender, pipe bending machine, mandrel bending machine Iajdpfxsx Nfhre Ah Njl -Manufacturer: Dako Gedore, electro-hydraulic pipe bender on a mobile base -Pipe diameter: 3/8" to 3" -Stroke: 320 mm -Motor: AEG 1.5 kW -Accessories: incl. bending jaws up to 3" (see photos) -Transport dimensions: 1140/1045/H1200 mm Total weight: 389 kg

Condition: used, functionality: fully functional, overall weight: 310 kg, Weight: 310 kg Dimensions: 900x700x1550(h) mm Iodpfxox I Rdij Ah Neal Motor power: 3 kW Solid square: 20x20 mm Solid round: 20 mm diameter Handrail: 60x12 mm

Condition: used, functionality: fully functional, Strigon TC3 Horizontal Milling Machine. X movement 800 mm Y movement 500 mm Z movement 400 mm C axis (integrated circular table) 360 x 1 degree Round table diameter D500 mm Iedpfxov Sk I Rj Ah Nsal Max speed 4000 f/min Speed 8000 mm/min Machine weight approx 5500 kg Dimensions 4200 x 3600 x 2600 mm Good working condition. Please check out our other listings as well.

Condition: good (used), functionality: fully functional, Year of construction: 1995, Tube bending machine by MARK / Ridgid Type: 2H B Iedpex Ivpwefx Ah Nsal Without tools

Year of construction: 2005, condition: ready for operation (used), Main Drive Number of axis 2 Iaodpfxox I S R Rs Ah Nsl This SPINNER TC65-MC was manufactured in 2005. A horizontal turning machine featuring a turret with driven tools, it handles a turning diameter of 310 mm and a length of 600 mm. Consider the opportunity to buy this SPINNER TC65-MC horizontal turning machine. Contact us for more information. Application Types Turning

Condition: new, roller (bottom) diameter: 56 mm, roller (top) diameter: 56 mm, roller diameter: 56 mm, sheet thickness steel (max.): 1 mm, - Capacity 1050 x 1 mm Iajdpfjr Ixphox Ah Nol - Roll diameter 56 mm - Conical roller - Swivel top roller - Documentation

Condition: good (used), Three-roll bending machine, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll bending machine, profile bending machine, three-roll sheet metal rolling machine, manual bending machine Ijdpex Ir Dwjfx Ah Nsal -Roll bending machine: 3-roll roll bending machine, hand-operated -Max. sheet width: 1600 mm -Max. sheet thickness: 2 mm -Roller diameter: 90 mm -Dimensions: 2000/1125/H1370 mm -Weight: 405 kg

Condition: used, Year of construction: 1992, max. wheel diameter 175 mm gear width 710 mm max. module 4,5 min. module 0,5 weight 4,5 t total power requirement 10,5 kW Equipment/accessories: - Milling arbors - Clamping devices - Documentation Iedpfx Aovzhfreh Nsal

Condition: ready for operation (used), Model: B1800 gebruiksonderdelen: diameter: 180 mm diameter: 260 mm Iaedpox Imm Tjfx Ah Nsl

Condition: good (used), Robust horizontal surface grinding machine with a large long-bed design, suitable for heavy workpieces and precise surface grinding operations. The machine is in operational condition and can be inspected under power. Technical data (approx.): • Grinding length: approx. 4000 mm • Grinding width: approx. 500–900 mm • Hydraulic table movement • Magnetic chuck • Electromechanical feed • Solid machine frame → low vibration and precise. Equipment: • Magnetic chuck • Coolant unit • Control panel • Work lighting. Advantages: • Ideal for long/heavy workpieces • High accuracy due to solid construction • Immediately ready for use. Inspection possible by appointment. Ijdpex Ngx Sefx Ah Noal

Condition: ready for operation (used), Year of construction: 2015, spindle speed (max.): 2,000 rpm, travel distance X-axis: 215 mm, travel distance Z-axis: 230 mm, spindle motor power: 18,500 W, total height: 2,046 mm, overall weight: 9,500 kg, controller manufacturer: FANUC, controller model: 0i-TF Plus, product length (max.): 3,000 mm, number of axes: 2, General Data Machine weight 9500 kg Measurements height 2046 mm Control Unit Brand FANUC Model 0i-TF Plus Main Drive Number of axis 2 Spindle Speed 2000 RPM Spindle motor power 18.5 kW Iaedpex I S Naofx Ah Nel Dimensions Machine Length 3000 mm Movement X-Axis Movement 215 mm Z-Axis Movement 230 mm This HWACHEON TTC-10 horizontal turning machine was manufactured in 2015. It features a swing over bed of Ø 500 mm, a maximum machining diameter of Ø 400 mm, and a maximum machining length of 203 mm. Equipped with a Fanuc Oi-TF Plus control, it offers rapid traverse rates of 30 m/min in both X and Z axes. Consider the opportunity to buy this HWACHEON TTC-10 horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: new, Year of construction: 2025, roller diameter: 140 mm, – Capacity 1270 x 4.5 m – Electrically adjustable rear roller – Digital display for rear roller movement – Hardened rollers – Conical rollers – Pivoting top roller – Brake motor – Emergency stop – Documentation Iaedpfxjwbug Ue Ah Nel – 400 V

Condition: new, Year of construction: 2024, roller length: 3,000 mm, sheet thickness (max.): 90 mm, sheet thickness steel (max.): 90 mm, sheet thickness aluminum (max.): 90 mm, machine available with special price Iasdpotp Tfnjfx Ah Njl

Condition: used, Year of construction: 1969, max. wheel diameter 160,175 mm gear width 355 mm max. module 4,5 spindle bore 75 mm centre distance 410 mm min. number of teeth 2, 3 Iajdpfx Ahovzhf So Nol cutter diameter max. 115 mm cutter length max. 105 mm axis distance between cutter and workpiece - max. 138 mm axis distance between cutter and workpiece - min. 30 mm milling head -swivable 120 ° milling spindle speeds 70 - 400 U/min axial-feeds 0,25 - 4,0 mm/U radial feeds 0,09 - 1,5 mm/U total power requirement ca. 9,5 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 1730x1400x1440 mm Equipment/accessories: - Interchangeable wheels - Milling arbors - Clamping devices - Documentation

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, total length: 16,800 mm, total width: 6,300 mm, total height: 3,600 mm, working length: 620 mm, Equipment: emergency stop, Fully automatic tube bending and welding machine with solid-state laser Trumpf TruDisk 3002 (6C), for the production of round, oval, polygonal, longitudinally welded tubes. Diameter from 80-400mm, length from 80-620, material thickness 0.8-2.0mm (steel, chrome steel and stainless steel). Further features of the fully automated tube production machine are -Bending station (welding edge bending) Camera-guided welding optics. -seam smoothing to eliminate any height offsets in the weld seam -Annealing" at approx. 500 °C to optimize subsequent expansion or calibration -Extraction system for welding fumes. -Complete maintenance by the manufacturer. Further machine data can be found in the pictures or under the homepage of weil-technology (solutions/machine-systems/ecostar) The machine can be inspected under power at our Schönauer Straße site in 78737 Fluorn-Winzeln. Dismantling, loading and transportation are to be provided by the buyer. Iaodeu Ut S Ejpfx Ah Njl

Year of construction: 1983, condition: ready for operation (used), General Data Machine weight 4400 kg Main Drive Number of axis 3 Iaedpjx Imrcjfx Ah Njl This 3-axis NILES DLZ 630 V x 2000 was manufactured in 1983. It features a turning diameter over bed of 630 mm and over support of 340 mm, with a turning length of 2000 mm. The spindle speed ranges from 22.5 to 1120 rpm across 18 steps. Total power requirement is 15.0 kW, and it includes multiple steady rests and face plates. If you are looking to get high-quality turning capabilities consider the NILES DLZ 630 V x 2000 machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2006, max. wheel diameter 2 - 45 mm gear width 250 mm max. module 1,5 mm min. module 0,5 weight of the machine ca. 2,2 t control Fanuc 18i-MB max. workpiece length 250 mm weight of the machine ca. 2200 kg Milling cycles: - straight, helical, crowned gearing - radial, radial-axial, climb and conventional milling, roughing, finishing - worm wheels, straight-toothed bevel wheels, face gearing (option: only in partial process) Technical Details: - maximum workpiece length 250 mm - maximum toothing length 150 mm - maximum module in steel 1 mm (gear hobbing) - maximum module in steel 1.5 mm (worm milling) - maximum module in steel 0.5 mm (bevel gear hobbing) - milling cutter diameter 16-32 mm (gear hobbing) - milling cutter diameter 40-63 mm (worm milling) - maximum setting angle of milling head ±45 deg. (Rolling) - maximum setting angle of milling head ±30 deg. (worm milling) - Shift travel 34 mm (CNC axis) - Collet / retraction mandrel W20 - maximum speed of the workpiece spindle 770 rpm. - milling spindle drive 0.55 kW - Maximum speed of the milling spindle 8000 rpm. CNC axis drives: -X-axis = plunge travel 80 mm -Z-axis = longitudinal feed travel 190 mm -C-axis = workpiece axis 360 deg. -Rapid traverse X/Z 6 m/min. -Hydraulic unit 0.37 kW -Dimensions 2100 x 1440 x 1700 (LxWxH) Iodpfx Ahovq Sfze Noal Options: -CNC shift axis 34 mm -Adjustment angle with CNC axis -Deburring device Accessories: - spiral conveyor

Year of construction: 2021, condition: ready for operation (used), General Data Machine weight 10000 kg Measurements height 2330 mm Dimensions Machine Length 3530 mm Main Drive Number of axis 5 Spindle Speed 5000 RPM Spindle motor power 22 kW Movement X-Axis Movement 270 mm Y-Axis Movement 120 mm Iaedpfx Ahox Imrio Nsl This 5-axis Okuma LT 300 MY was manufactured in 2021, featuring a max turning diameter of 350 mm and a bar capacity of 65 mm. It supports spindle speeds up to 5,000 RPM and includes a motorized 12-position turret. Ideal for complex turning operations, the machine also offers rapid traverse rates and a substantial distance between centers of 1,200 mm. Consider the opportunity to buy this Okuma LT 300 MY horizontal turning machine. Contact us for more information. Application Types Turning