Used Holzkraft Fs 41 Elite Tersa for sale (199)

Condition: new, - NEW-descriptionCutting plane directly on the saw bladeHeavy steel and cast iron constructionPrecision-guided format sliding carriage made of aluminium,anodized as standardLarge-area table extension guided on a telescopic arm andlongitudinally adjustableExtendable aluminum telescopic fence, angle adjustable with professionalstop flapsRip fence with quick release and fine adjustmentLarge work table made of milled gray cast iron stays permanently flatThe standard table extension and table extension enable easy work with larger workpiecesQuiet running and precise cutsEquipped with a powerful three-phase motorThe large dimensioned cast iron sawing unit is attached twice to the cast iron table and guarantees stability, precision, smooth running and a long service lifeMaximum cutting height is also achieved with the built-in scoring deviceEquipment details:Double cradle saw unitGenerously dimensioned, made of steel/cast ironClose to the saw blade, supported on both sides for precision, smooth running and a long service lifeAdjustable in height and up to 45° with a crankMaximum cutting height is also achieved with the built-in scoring deviceAlso available with scoring unittelescopic stopExtendable telescopic stop up to max. 2550 mmAngle adjustableWith professional stop flapsAluminum sliding carriageWith a thousand times proven ball contact systemInsensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail10-year Holzkraft guarantee on wear and tear on the guidewaysRip fence with round rod guideWith fine adjustment and quick releaseStable round rod guide made of ground steel with a diameter of 45 mmCan be folded down as standard for cutting large workpiecesTechnical specifications:Dimensions and weightsWeight (net) approx. 380 kgConnection suctionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mmMachine body length 1388 mmWorking area length 1000 mmMachine body width/depth 689 mmWorking area width/depth 2000 mmSpace required length 5118 mmSpace requirement width/depth 3830 mmelectrical dataConnection voltage 400 VDrive motor power 5.0 kWPhase(s) 3 PhNominal operating mode drive motor S6Type of current ACDuty cycle drive motor 40%Mains frequency 50 HzSliding carriage and tableFormat slide length 2250 mmTable length 840 mmFormat sliding carriage width 270 mmTable width 560 mmFormat sliding carriage height 124 mmTable height 900 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting height 90° 90 mmMax. cutting width to the left of the saw blade 2310 mmMax. cutting height 45° 63 mmtrimming length 2250 mmSaw blade diameter 315 mmSaw blade inclination 90 - 45°Saw blade speed 4000 rpmArt. No. 5504323Ausziehbarer Teleskop-fence to max. 2550 mmWinkeladjustableMit Profi-AnschlagklappenAluminium-sliding tableMit tausendfach bewährtem KugelkontaktsystemStaub- and schmutzunempfindlich durch minimalen Berührungspunkt zwischen Kugel and Trapezschiene10 Jahright hand Holzkraft-guarantee on abrasion der Führungsbahnenrip fence with round rod guidingMit fine adjustment and quick clampingStabile round rod guiding aus geschliffenem steel with 45 mm diameterSerienmäßig tiltable for den Zuschnitt großer WerkstückeTechnische Daten:dimensions and Gewichteweight (Netto) ca.   380 kgAnschluss Absaugungsuction nozzle diameter   120 mmsuction nozzle diameter Sägeblattschutz   60 mmAufstellinformationenTransportbreite   900 mmErläuterung required spaceDie d... Bsdpfx Aovyuqfsafjcu

Condition: new, Year of construction: 2022, Stock saleYear of manufacture 2022Description:- Separate work table for solid wood and veneer sanding, manually swivelable by 45° or 35°- The stop for veneer sanding can be adjusted to 0,1 mm- Motorized height-adjustable sanding unit- Additional table with suction openings for sanding radii on the rubberized deflection roller- Sanding sleeve device with attachable work table- The welded steel machine stand guarantees high torsional rigidity and vibration-free working- Oscillating sanding belt with separate geared motor for better sanding results- Oscillation can be switched on as required- Abrasion-resistant and highly gliding plastic tracks on the work table surface- Sanding soleplate with graphite coating for a longer service life of the sanding belt- The spring-loaded belt tension automatically compensates for belt length differences- Rubberized and grooved sanding drum- Convenient operation from two sides on the rotating control panel above the machine- Centrally positioned holder for feed unitTechnical data:Dimensions and weightsLength (product): approx.1820mmWidth/depth (product): approx.1050mmHeight (product): approx.1470mmWeight (net): approx.400kgDrive powerPower oscillation motor: 0.38kWSuction connectionSuction nozzle diameter: 150mmWork table(s)Work table length: 1000mmWork table width: 280mmTable swivel: 45 / 35°Electrical dataSupply voltage: 400VMains frequency: 50HzSanding unitSanding belt length: 2640mmSanding belt width: 150mmBelt speed(s): 14m/sOscillation stroke: 20mmSanding surface length: 890mmSanding surface width: 150mmSanding height max.150mmScope of delivery:1x edge sanding machine KSO 150 M F 3 PRO1x sanding belt K1005x rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm6x sanding sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mmon-board toolmitre fence Bjdpfx Aovwfa Sjafocu

Condition: new, - Heavy profile design with high dead weightfor maximum running smoothness- Smooth and precise running thanks to torsion-freemachine housing- Large cast iron saw table made fromone piece, tiltable from 0° to 45° withground and polished surface- Large cast iron parallel fence- Fast and precise cutting height adjustment viahandwheel and gear rack with millimeter scale- Angle stop as standard- Precision 3-roller saw band guide with guide rollerstop and bottom, with fine adjustment- Eccentric quick-release lever. The basic tension settingis not changed, with integrated saw bladetension indicator- The saw table is mounted on a double rocker support,{The saw table is mounted on a double rocker mount,simple and quick fixing of the set tilt angle via quick clamping- Eccentric quick clamping lever- The basic tension setting is not changed- With integrated saw blade tension indicator- The solid cast iron saw table is easily and convenientlyadjusted via a handwheel rack and pinion guide- The tilt is infinitely adjustable from 0° to 45°- Simple and quick fixing of the set tilt angle viaquick clampingTechnical data:Work table dimensions 750 x 530 mmCutting speed 1400 m/wheel diameter 530 mmmax. cutting height 350 mmmax. cutting width with fence 465 mmmax. cutting width without fence 510 mmmax. cutting width without stop 510 mmsaw blade length 4190 mmprecision guide top/bottomsaw table inclination 0° - 45°with gear rack handwheelmotor power 400 V/50 Hz/P2 3.75 kWweight 305 kgdimensions1000x720x2040 mmsuction nozzle diameter 2 x 100 mmincluded:1 saw blade set, length 4190 mm, . 515 5313 SETStorage location 97447 Gerolzhofen Bcjdpfovwfbcjx Aafsu

Condition: new, - New -Description:- Vertical version for splittingShort and meter wood- Robust and solid construction- Shock and scratch resistant due to high qualitypowder coating- Fast, tool-free gap height adjustment- Low base plate for easy,effortless loading of large logs- Phase inverter on all 400V models- Convenient transport with hand drawbardue to standard chassis with largePneumatic wheels and additional support wheel- Space-saving storage through simplelowerable cylinder- Powerful industrial hydraulic system- Two-hand safety circuit- With splitting material holderTechnical specifications:Dimensions and weightsLength approx. 1050mmWidth/depth approx. 1700 mmHeight approx. 2500mmWeight approx. 373.1 kgdrivePTO speed 540 rpmInput power 5.5 kWelectrical dataConnection voltage 400 VMains frequency 50 Hzdevice dataSplitting power max. 26.1 tGap length min. 560 mmGap length max. 1100 mmLog diameter min. 80 mmLog diameter max. 400 mmhydraulic systemHydraulic oil tank capacity 30 lItem No. 5981031 Bjdpfxevwfzie Aafecu

Condition: new, power: 7.5 kW (10.20 HP), Equipment: scorer, Net price: €10,500 - Scorer - Saw blade tilt and height adjustment are manual - Cutting height 200mm - Scoring device with separate drive motor - Main saw blade with belt drive and speeds 2800/3665/4800 min¯¹ - High dead weight ensures vibration-free operation - Large extension table with material roller - Parallel fence with round bar guide - Extendable aluminum longitudinal fence with two folding stops - 7.5 kW powerful main motor mounted on a robust cast iron frame - Four-times-cushioned sliding table made of anodized aluminum with high torsional rigidity - Multiple locking on sliding table - Standard with table extension and table extension made of thick plate - Large swing guard hood easily swivels up using a gas spring - Saw blade clamping via tool-free rapid system + Extraction connection Extraction port diameter: 120mm Extraction port diameter for saw guard: 80mm + Electrical data Connection voltage: 400V Bcedpfewf Ndcex Aafsu Mains frequency: 50Hz Nominal power consumption: 8.3kW Output power: 7.5kW + Sliding table and table Sliding table length: 3200mm Sliding table height: 890mm Table height: 890mm + Circular saw unit Cutting width with parallel fence: 1450mm Max. cross-cutting width left of saw blade: 3200mm Saw blade tilt: 90 – 45° Max. cutting height 90°: 200mm Max. cutting height 45°: 140mm Saw blade diameter: 550mm

Condition: new, - New-- Cutting plane directly on the sliding carriage- Heavy steel and cast iron construction- Precision-guided format sliding carriagemade of aluminium, anodised as standard- Large table extension on telescopic armguided and longitudinally displaceable- Extendable aluminum telescopic stop,angle-adjustable with professional stop flaps- Rip fence with quick release and fine adjustment- Large work table made of milled gray cast ironremains permanently plan- The standard table extension and table extensionextension make it easy to work with larger onesworkpieces- Quiet running and precise cuts- Equipped with a powerful three-phase motor- The large dimensioned saw aggregateGray iron is doubly fixed to the cast iron table and isa guarantee for stability, precision, smooth running andlong lifetime- Maximum cutting height is also when installedscoring device reachedMade in ItalyEquipment details:Double cradle saw unit- Oversized, made of steel/cast iron- Close to the saw blade, supported on both sidesfor precision, smooth running and a long service life- Adjustable in height and up to 45° using a crank- Maximum cutting height is also when installedscoring device reached- Also available with scoring unittelescopic stop- Extendable telescopic stop up to max. 2550 mm- Angle adjustable- With professional stop flapsAluminum sliding carriage- With a thousand times proven ball contact system- Resistant to dust and dirtminimum point of contact between ball andtrapeze rail- 10-year Holzkraft guarantee against wear and tearguidewaysRip fence with round rod guide- With fine adjustment and quick release- Stable round rod guide made of ground45mm diameter steel- Foldable as standard for cutting large onesworkpiecesTechnical specifications:Dimensions and weightsWeight approx. 385 kgDust extraction connectionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mmelectrical dataDrive motor power 5.0 kWConnection voltage 400 VFormat sliding carriage and tableFormat slide length 2600 mmFormat sliding carriage width 270 mmFormat sliding carriage height 124 mmTable length 840 mmTable width 560 mmTable height 900 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting width to the left of the saw blade 2310 mmtrimming length 2600 mmSaw blade inclination 90 - 45 °Max. cutting height 90° 90 mmMax. cutting height 45° 63 mmDiameter (main) saw blade 315 mmSpeed ??of (main) saw blade 4000 rpmPU 1Scope of delivery:Table extension and table wideningAnodized aluminum format sliding carriageAluminum folding stopsRip fence with round rod guide andfine tuningItem No. 5504326 Bjdpfsvyupzox Aafjcu

Condition: new, Year of construction: 2023, Stock saleYear of construction 2023Description:- Sanding unit can be swivelled by hand crank- The machine stand made of welded steel guarantees high torsional rigidity and vibration-free working- Oscillating sanding belt with separate gear motor for better sanding results- Oscillation can be switched on as required- Sanding soleplate with graphite coating for a longer service life of the sanding belt- Height-adjustable sanding table to utilize the entire sanding belt width- Additional table with suction openings for sanding radii on the rubberized deflection roller- Sanding sleeve device with attachable work table- The spring-loaded belt tension automatically compensates for belt length differences- With adjustable stops, ideal for veneer sanding- The grooved veneer stop allows the veneer overhangTECHNICAL DATADimensions and weightsLength (product) approx. 1700 mmWidth/depth (product) approx. 1000 mmHeight (product) approx. 1150 mmWeight (net) approx. 300 kgDrive powerPower oscillation motor 0,11 kWSuction connectionSuction nozzle diameter 2 x 100 mmWork table(s)Work table length 950 mmWork table width 450 mmWork table height adjustment 110 mmElectrical dataSupply voltage 400 VMains frequency 50 HzSanding unitSanding belt length 2640 mmSanding belt width 150 mmBelt speed(s) 14 m/sOscillation stroke 15 mmSanding surface length 800 mmSanding surface width 150 mmSwivel sanding unit 0 - 45°SCOPE OF DELIVERY1x sanding belt K1005x rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm6x sanding sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mmtool kitmitre fence Bedpfxsvwfxbo Aafocu

Condition: new, Technical specifications:Dimensions and weightsWorking height 850 - 1150 mmRocker support 735 mmLength approx. 1270 mmWidth / depth about 730 mmHeight about 1130 mmWeight approx. 121.5 kgdriveDrive type electric motor with direct driveElectrical dataRecording power 7.5 kWSupply voltage 400VPhase (s) 3 PhCurrent type ACMains frequency 50 HzsawbladeDiameter 700 mmcutting capacityRocker round wood 240 mmRocker turning cut 250 mmRocker firewood 370 x 240 mm Bcjdpfx Asvwfxhjafsu

Condition: new, - NEW -description- Stable cast steel construction- Milling spindle can be swiveled backwards from 0 ° to -45 °- Three spindle speeds from 3500 - 10000 rpm- As standard with right-left rotation of the milling spindle- Large-sized milling unit made of gray cast iron,attached directly to the table- Solid and precise gray cast iron table- Quick and easy speed change- Powerful 5.0 kW industrial motor- Standard curved milling protection hoodEquipment detailsAluminum sliding carriage- Equipped with a thousand times tried and testedBall contact system- torsion-resistant, extremely precise, smooth-running andproblem-free in daily use- 10 year Holzkraft guarantee on wear and tearof the guidewaysGray cast iron milling unit- Attached directly to the router table- Milling spindle mounted high up with precision ball bearings,thus the lowest possible bearing loadand the longest possible service life- 3 milling speeds from 3500 to 10000 rpmPowerful engines- Equipped with a powerful three-phase motorMilling protection- The milling protection is standard for maximum safetywith a height-adjustable guide railand ling stop- Exact milling stop with a quick adjustmentand a fine adjustment with a scale on the stop jaw- The integrated suction connection ensures a clear viewRouter table opening- A large router table opening also enablesthe use of larger flattening cuttersand tenoning and slotting toolsabove and below the tableArc milling protection hood- Included as standard in the scope of deliveryReversible stop jaws- Versatile integrated stop for bridgingthe tool gap- Allows you to work safely withnarrow workpiecesTechnical specifications:Dimensions and weightsWeight (net) approx. 290 kgConnection suctionExtraction nozzle diameter 2 x 120 mmWork tableWorking table length 1000 mmSlide length 1000 mmWorking table width 435 mmSlide carriage width 270 mmTable height 900 mmInstallation informationRequired space length 1945 mmMachine body width / depth 710 mmRequired space width / depth 2220 mmWorking area length 1600 mmExplanation of space requirementsThe dimensions take into account maximum travels or useful king area width / depth 1600 mmMachine body length 1000 mmExplanation of the work areaPlease add the specified dimensions with the space required in order to obtain the free installation area recommended for the ctrical dataConnection voltage 400 VMains frequency 50 HzPhase (s) 3 PhDrive motor power 5.0 kWType of current ACMilling spindleSpindle inclination 0 to -45 °Spindle speed (s) 3500/7000/10000 min¯¹Usable length of the spindle 100 mmSpindle mandrel diameter 30 mmSpindle overhang r table 130 mmMilling tool diameter l diameter can be lowered 180 mmTool diameter max. Tenon milling 275 mmTool diameter file milling 210 mmscope of deliveryArc milling protection hoodAnodized aluminum sliding carriageTelescopic miter fenceAluminum stop jawsItem No. 5502045 Bedpevwf Ucsfx Aafjcu

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: AB00021322, total width: 1,820 mm, total height: 1,960 mm, total length: 1,650 mm, working width: 1,100 mm, overall weight: 1,160 kg, power: 11 kW (14.96 HP), grinding belt length: 1,900 mm, workpiece height (max.): 170 mm, grinding belt width: 1,115 mm, input voltage: 400 V, - The calibrating and fine sanding machine LIBRA 35 is an extremely versatile machine suitable for a wide range of applications. - Robust, tube-reinforced monoblock steel frame with high-mounted working units for maximum rigidity. - User-friendly due to a clearly arranged control panel on the front side. - Motorized table height adjustment. - Digital display for working height. Bodewwkuyspfx Aafecu - Electronically controlled sanding belt oscillation with reduced compressed air requirement. - Automatic star-delta start-up for the main motor. - Natural rubber feed belt with negative profile. - Feed table with two rollers at the infeed and outfeed of the feed belt. - Belt feed driven by geared motor with two speeds. - Flexible steel pressure bar before the first unit. - Rubber pressure rollers before and after each working unit. - Pneumatic belt tensioning per unit with decimal correction option for grit/band thickness.

Condition: new, - New -with swiveling sanding unit andoscillating sanding belt F version forVeneer grindingDescription:- The grinding unit can be swiveled up to 45 ° using a lever- The machine stand made of welded steelguarantees high torsional rigidity andvibration-free work.- Oscillating sanding belt with separateGear motor for better grinding results- Oscillation can optionally be switched on- Sanding sole with graphite coating for a higherService life of the sanding belt- Height-adjustable sanding table for usethe entire width of the sanding belt- Height-adjustable additional table with suctionfor grinding radii- The spring-loaded belt tension is the sameTape length differences independently.- With double suction- Extendable roller table extension- With rubberized sanding roller- Veneer edge grinding device with contact shoewith fine adjustment, relief rollersand fence rulers- With grooved infeed ruler for veneer protrusions- Quick changeover of veneer edgespossible on solid wood sandingTechnical specifications:Dimensions and weightsLength approx. 1900 mmWidth / depth approx. 900 mmHeight approx. 1350 mmWeight approx. 290 kgConnection suctionExtraction nozzle diameter 140/100 mmDrive powerOscillation motor 0.25 kWWork table (s)Working table length 960 mmWorking table width 350 mmWork table height adjustment 230 mmHeight adjustment longitudinal table 230 mmCross table height min. 720 mmElectrical dataConnection voltage 400 VMains frequency 50 HzGrinding unitSanding belt length 3000 mmSanding belt width 200 mmBelt speed (s) 20 m / sSanding surface length 1050 mmSanding surface width 200 mmOscillation stroke 20 mmItem No. 5363001 Bsdpfxevwgbwo Aafecu

Condition: new, - NEW -- Cutting plane directly on the saw blade- Large dimensioned cast iron saw unit double on the cast iron tablefastened - guarantee for stability, precision, smooth running and long service life- Precision-guided format sliding carriage made of aluminium, standardanodized- 10-year HOLZKRAFT guarantee on wear and tear on the guideways of thesliding carriage- Rip fence with round rod guide and fine adjustment as standard- Large work table made of milled gray cast iron- Quiet running and precise cuts- Enable standard table widening and table extensioneasy work with larger workpieces- Extendable aluminum telescopic fence with angle adjustment andtwo professional folding stops-Made in ItalyTECHNICAL SPECIFICATIONSDimensions and weightsWeight (net) approx. 295 kgConnection suctionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mminstallation informationTransport width 700 mmMachine body length 802 mmMachine body width/depth 615 mmSpace required length 3860 mmSpace requirement width/depth 2750 mmExplanation of space requirementsThe dimensions take into account maximum travel distances or usable lengthsWorking area length 1000 mmWorking area width/depth 2000 mmExplanation of work areaPlease add the specified dimensions to the space required to calculate theto obtain the recommended free installation space for the ctrical dataConnection voltage 400 VMains frequency 50 HzDrive motor power 4.0 kWRated operating mode drive motor S 6Duty cycle drive motor 40%Sliding carriage and tableFormat slide length 1600 mmFormat sliding carriage width 270 mmFormat sliding carriage height 124 mmTable length 1020 mmTable width 325 mmTable height 860 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting width to the left of the saw blade 1660 mmtrimming length 1600 mmSaw blade inclination 90 - 45°Max. cutting height 90° 100 mmMax. cutting height 45° 79 mmSaw blade diameter 315 mmSaw blade speed 4000 rpmFURNISHINGAnodized aluminum format sliding carriageHandle for sliding carriagetrimming frameSaw rip fence with round rod guideStops Two professional folding stopstrimming shoeeccentric clamptable extensiontable extensionsaw blade guard&nbsp, Bsdevyup Uspfx Aafjcu

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, cutting length (max.): 3,200 mm, cutting width (max.): 1,450 mm, cutting width at rip fence: 140 mm, cutting height (max.): 200 mm, cutting height with scoring (max.): 200 mm, saw blade diameter: 550 mm, table length: 3,200 mm, overall weight: 1,280 kg, rotational speed (min.): 2,800 rpm, rotational speed (max.): 4,800 rpm, power: 7.5 kW (10.20 HP), Equipment: motor brake, scorer, Heavy format circular saw with scoring unit and Siemens three-axis control Hanging control panel with Siemens control and 10" touch display Control of the saw blade height/inclination and positioning of the parallel stop via the control panel Max. cutting height 200mm Scoring device with separate drive motor Main saw blade with belt drive and speeds of 2800/3665/4800 min¯¹ High weight ensures vibration-free operation Large outrigger table with material roll Bsdpfsvmfawsx Aafecu Extendable aluminum longitudinal stop with three folding stops and digital position display 7.5 kW main motor mounted on a robust cast iron frame Four-bearing format sliding carriage with double roller carriage made of anodized aluminum with high torsional rigidity Multiple locking on the sliding table Standard with table extension and table extension made of sheet steel Large pendulum protection hood conveniently operated using a gas pressure spring can be swiveled up Saw blade clamped via tool-free Rapid system The panel saw is set up in our demonstration center in Chemnitz. It is new and in an unused condition. We are happy to help with transport, assembly and instruction.

Condition: new, Year of construction: 2022, Sale from stockYear of construction 2022Description:- Sanding unit can be swiveled by handwheel- The machine stand made of welded steel guarantees high torsional rigidity and vibration-free working- Oscillating sanding belt with separate gear motor for better sanding results- Oscillation can be switched on as required- Sanding soleplate with graphite coating for a longer service life of the sanding belt- Height-adjustable sanding table for utilizing the entire sanding belt width- Additional table with suction openings for sanding radii on the rubberized deflection roller- Sanding sleeve device with attachable work table- The spring-loaded belt tension automatically compensates for belt length differencesTECHNICAL DATADimensions and weightsLength (product) approx. 1700 mmWidth/depth (product) approx.1 000 mmHeight (product) approx. 1150 mmWeight (net) approx. 250 kgDrive powerPower oscillation motor 0,11 kWSuction connectionSuction nozzle diameter 2 x 100 mmWork table(s)Work table length 900 mmWork table width 360 mmWork table height adjustment 110 mmElectrical dataSupply voltage 400 VMains frequency 50 HzSanding unitSanding belt length 2580 mmSanding belt width 150 mmBelt speed(s) 14 m/sOscillation stroke 15 mmSanding surface length 800 mmSanding surface width 150 mmSanding height max. 150 mmSwivel sanding unit 0 - 90°SCOPE OF SUPPLY1x sanding belt K1005x rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm6x sanding sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mmOn-board toolMitre fence Bcjdpfx Aasvwfkqefsu

Condition: new, - NEW -Description:- Robust welded steel construction- Workpiece is automatically fixed with each cut by saw blade cover- The saw blade is moved upwards via a pneumatic cylinder and dips back into the machine body after each cut- Saw blade feed infinitely variable via adjusting screw on the front of the machine- Effective chip and intrusion protection made of Plexiglas- High operating safety due to two-hand control- Standard with 1m roller conveyor to the left and right of the machine, and material stop with scale- Saw blade change via large side doorTechnical data:General informationSaw blade speed(s) 3000min¯¹Saw blade diameter 500mmSaw blade bore 30mmSaw blade thickness 4mmMitre angle noSuction nozzle diameter 125mmSound pressure level89dB(A)Dimensions and weightsLength (product) approx. 3000mmWidth/depth (product) approx. 1600mmHeight (product) approx. 1500mmWeight (net) approx. 700kgElectrical dataPower drive motor 6kWMotor speed 2900min¯¹Total power consumption 15.5ASupply voltage 400VMains frequency 50 - 60HzStandards and approvalsEMC class APneumatic connectionAir consumption approx. 33l/minPneumatic working pressure 6 - 8barCutting areasCutting capacity 0° (square) solid material 160 x 160mmCutting capacity 0° (rectangular) solid material 400 x 100mmScope of delivery:- 1 m infeed roller conveyor, to the right of the machine- 1 m outfeed roller conveyor including manual material stop with scale, to the left of the .: 5651500 Bcjdpfx Ajvwflujafju

Condition: new, DescriptionWork table made of heavily ribbed gray cast iron and base frame made of welded steel guarantee torsional rigidity and vibration-free operationUnique in this performance class: Format sliding carriage made of anodized aluminum for highest cutting precisionCutting plane directly on the saw bladeSwiveling saw blade from 90° - 45Trimming frame with aluminum crosscut fence and adjustable fence jaw for panels and large workpiecesMilling protection hood for profilingTwo independent motors for each working unitTECHNICAL DATADimensions and weightsWeight (net) approx. 190 kgSuction connectionSuction port diameter 120 mmSuction port diameter saw blade guard 60 mmElectrical dataSupply voltage 400 VMains frequency 50 HzNominal operating mode drive motor S6Duty cycle drive motor 40Power of drive motor 2 x 1.8 kWSliding carriage and tableLength of sliding table 1140 mmFormat sliding carriage width 201 mmHeight of format sliding carriage 70 mmtable length 1040 mmtable width 224 mmMilling spindlespindle mandrel diameter 30 mmuseful length of spindle 75 mmspindle speeds 5000/7500 min?¹Milling tool diameter l diameter max. 160 mmtool diameter max. tenon milling 200 mmCircular saw unittrimming length 1200 mmCutting width with rip fence 700 mmMax. Trimming width to the left of the saw blade 1200 mmSaw blade inclination 90 - 45Max. Cutting height 90° 75 mmMax. cutting height Cutting height 45°60 mmMax. Saw blade projection 90° 67 mmMax. saw blade Saw blade projection 45°40 mmDiameter (main) saw blade 250 mmSpeed (main) saw blade 4000 min?¹EquipmentAnodized aluminum sliding carriageTrimming frame with angle-adjustable crosscut fence with a folding stop and degree scaleSaw parallel stopEccentric clampTable wideningTrimming fence with wooden fence jawsManual height adjustment of the spindleSaw blade height adjustment manualsaw blade tilt adjustment manual&nbsp, Bcodpfxsvwfqwo Aafju

Condition: new, - new -manufactured by Holzkrafttype HBS 533 SET- Especially quiet and precise running thanks to atorsion-free machine housing and asolid base made of sheet steel- Large sized gray cast iron saw table from onePiece with a precisely polished and polished surface- Comfortable laser device for cutting line marking- Saw band quick tension via eccentric lever on theMachine back- Standard with two speeds- Precise 3-roller saw band guides at top and bottom- Fast cutting height adjustment via rotary knob andRack with millimeter scale- Smooth-running aluminum rip fence withEccentric quick clamping and magnifying glass- Standard miter fence, both sidesadjustable by 60 °- Safety switch for automatic shutdownwhen opening the doorTechnical specifications:Working table dimensions 680 x 530 mmCutting speeds 850/430 m / wheel D 530 mmMax. Cutting height 270 mmMax. Cutting width with stop 474 mmMax. Cutting width without stop 514 mmSaw blade length 3865 mmPrecision guide 3 rollers top / bottomSaw table tilt -10 to +45 °Motor power 400 V / 50 Hz / P2 2.25 kWWeight 163 kgDimensions 1024 x 793 x 2048 mmSuction nozzle diameter 2 x 100 mmincluded:1 saw band set, length 3865 mm, 3 partsItem No. 5155303SET Bodpsvwgamefx Aafecu

Condition: new, - NEW -DESCRIPTION- Particularly smooth and precise running thanks to a torsion-free machine housing and a solid base made of sheet steel- Cast iron saw table with precisely ground and polished surface- Convenient laser device for cutting line marking- Quick saw blade tensioning via eccentric lever on the rear of the machine- Two speeds as standard- Precise 3-roller saw blade guides, as standard at the top and bottom- Quick cutting height adjustment via rotary knob and toothed rack with millimeter scale- Smooth-running aluminum parallel fence with quick eccentric clamping and magnifying glass- Angle fence as standard, adjustable by 60° on both sides- Safety switch for automatic switch-off when the door is openedTECHNICAL DATADimensions and weights- Length (product) approx.1020mm- Width/depth (product) approx.850mm- Height (product) approx.1982mmSuction connection- Suction nozzle diameter2 x 120mmWork table(s)- Work table length 535mm- Work table width 535mm- Work table height 945mm- Work table length max.685mm- Worktable extension length 535mm- Worktable extension width 150mm- Worktable inclination-10 - 45°- Explanation of worktable inclinationFor safety reasons, a holding device/stop must be fitted from 20° to prevent the wood from slipping!Electrical data- Supply voltage 400V- Mains frequency 50Hz- Output power 2.25kWCutting ranges- Cutting height max. 90°270mm- Cutting width max. with stop 474mm- Cutting width max. without stop 514mmSaw blade- Saw blade speed(s) 850 / 430m/min- Flywheel diameter 530mm- Saw blade length 3865mm- Saw blade length 3865mm- Saw blade length max.3872mm- Saw blade guidePrecision guide top and bottomSCOPE OF SUPPLY- Angle stop ±60°- Laser device for cutting line markingItem number: 5155303 Bjdpfxjvxr Nvj Aafscu

Condition: new, - new -Description:- Vertical design for splittingshort and meter logs- Robust and solid construction- Impact and scratch-resistant thanks to high-qualitypowder coating- Quick, tool-free splitting height adjustment- Low base plate for easy,{loading of large logs- Phase inverter on all 400 V models- Convenient transportation with manual drawbarthanks to standard chassis with largepneumatic wheels and additional support wheel- Space-saving storage thanks to easylowerable cylinder- Powerful industrial hydraulic system- Two-hand safety circuit- With splitting material holderTechnical data:Dimensions and weightsLength approx. 1050 mmWidth/depth approx. 1700 mmHeight approx. 2500 mmWeight approx. 282 kgDrivePTO speed 540 min¯¹Device dataSplitting force max. 23.4 tSplitting length min. 560 mmSplitting length max. 1100 mmSplitting material diameter min. 80 mmSplitting material diameter max. 350 mmHydraulic systemTank capacity hydraulic oil 24 . 5981023 Bcodovxr Ryepfx Aafou

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 2433345525, Suction nozzle 125 mm Nominal volume flow 884 m³/h motor power 2,2 kW 16A Bjdeiw D U Nepfx Aafscu mobile weight approx. 194 kg LxWxH: 1000 x 840 x 1650 mm tank size 730 x 660 mm manual shaking

Condition: new, - new -manufactured by Holzkrafttype HBS 633 S SETDescription:- Heavy profile design with high dead weightFor maximum running- Quiet and precise running thanks to torsion-freeMachine housing- Large-scale gray cast saw tableOne piece, tiltable from 0 ° to + 45 ° withPolished and polished surface- Large cast parallel connection- Quick and precise cutting height adjustmentHand wheel and rack with millimeter scale- Standard with angle stop- Precision 3-roll saw blade guide with guide rollersTop and bottom, with fine adjustment- Eccentric quick-release lever. The basic voltage settingIs not altered, with integrated blade-voltage indication- The saw table is mounted on a double tilt support,Easy and fast fixation of the setTilt angle over fast tension- Eccentric quick-release lever- The basic voltage setting is not changed- With integrated saw band tension indicator- The massive saw blade made of gray cast iron is light and comfortableVia a handwheel rack and pinion guide- The inclination is infinitely adjustable from 0 ° to 45 °- Easy and fast fixing of the adjusted tilt anglequick releaseTechnical specifications:Working table dimensions 830 x 600 mmCutting speeds 1615 m / minFlywheel Ø 630 mmMax. Cutting height 400 mmMax. Cutting width with stop 570 mmMax. Cutting width without stop 610 mmBand saw blade length 4600 mmPrecision guide up / downSawing table inclination 0 to +45 °Motor power 400 V / 50 Hz / P2 3.75 kWWeight 380 kgDimensions 1190 x 750 x 2060 mmSuction nozzle diameter 2 x 100 mmItem No. 5156303SETlocated in 97447 Gerolzhofen- free on truck - Bsdpfevwf Tljx Aafscu

Condition: new, NEWPrecision band saws for theambitious craftsmenA particularly quiet and precise run thanks to onetorsion-free machine housing and onesolid base made of sheet steelGray cast iron saw table with precisely groundand polished surfaceComfortable laser device for cutting linemarkSaw band quick clamping via eccentric leveron the back of the machineStandard with two speedsPrecise 3-roller saw band guides,standard top and bottom from HBS 351Fast cutting height adjustment viaKnob and rack with millimeter scaleSmooth-running aluminum rip fence withEccentric quick release and magnifying glassStandard miter stop,adjustable on both sides by 60 °Safety switch for automaticShutdown when the door is openedEquipment detailsPrecision guidanceHBS 351 with 3-roller saw band guide at the topand belowWith leadership rolesEasily adjustablePractically maintenance-freeQuick release systemEccentric quick release leverThe basic voltage setting is therebynot h integrated saw band tension indicatorFlywheelsFlywheels with a special coating (HBS 351)The basic voltage setting is made via themade at the top of the rotary tableThe gray cast iron saw table is on a Wipp holder saw table inclination can be from -10 ° to + 45 °can be set play of the blade tensionSaw band tension display fordifferent saw band widthsReadable from the outside by a in the doorintegrated viewing windowPrecision guidanceFrom HBS 431 with precision saw band guidewith leadership rolesFine and fine adjustment above and belowTwo speeds via V-beltselectable adjustmentBalanced cast iron flywheelsgrant a quiet runAluminum rip fenceWith quick-action eccentric clamp, particularly easy and precise to moveEasy to read millimeter scale and integratedMagnifying glassSaw table double rocker bracketThe table inclination from -10 ° to + 45 ° takes place overprecise and smooth rack and pinion guidancewith pommelFor safety reasons, from 20 °a holding device / a stop may be attached,to prevent the wood from slipping!Technical specifications:Dimensions and weightsLength (product) approx. 820 mm Height (product) approx. 1852 mmWidth / depth (product) approx. 730 mmWeight (net) approx. 130 kgSuction connectionExtraction nozzle diameter 2 x 120 mmWork table (s)Working table length 610 mmWorktable inclination -10 - 45 °Working table width 431 mmExplanation of worktable inclinationFor safety reasons, a holding device / a stop must be attached from 20 ° to prevent the wood from slipping!Working table height 950 mmElectrical dataConnection voltage 230 VMains frequency 50 HzPhase (s) 1phOutput power 1.5 kWCurrent type ACCutting areasCutting height max. 90 ° 270 mmCutting width max. without stop 410 mmCutting width max. with 370 mm stopSaw bandSaw band speed (s) 900/450 m / min3-roller saw band guidePrecision guidance above and belowSaw band length 3345 mmscope of deliveryAngle stop ± 60 °Laser device for cutting line marking1 x saw band wood 3345 x 6 x 0.65 mm Bodevwgbdepfx Aafscu

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: AB00017920, overall weight: 510 kg, spindle diameter: 30 mm, milling spindle length: 180 mm, height adjustment type: mechanical, table length: 2,500 mm, table width: 810 mm, rotational speed (min.): 3,000 rpm, rotational speed (max.): 10,000 rpm, input voltage: 400 V, spindle stroke: 90 mm, pivoting range: 45 °, working height: 923 mm, power: 7 kW (9.52 HP), Equipment: motor brake, - Stable steel and grey cast iron construction - Dynamically balanced milling unit anchored to the worktable - Particularly robust design - Smooth operation thanks to precision components and high own weight - Standard with reversible rotation and electronic interlock when changing direction - Five speeds from 3000 to 10000 rpm - Speed adjustment is simple and convenient from the machine side - Standard with MK 4 quick-change spindle system Bjdpfowwkqhex Aafscu - Large worktable made of cast iron for lasting precision - Easy handling due to control elements and speed display on the machine front - Large dimension milling fence with fine adjustment and aluminum fence jaws as standard - Fence adjustment via handwheel - Numerical display of the set spindle height, precise to one-tenth - High-performance industrial motors

Condition: new, The work table made of heavily ribbed gray cast iron andguarantee the base made of welded steelTorsion resistance and vibration-free workingHigh quality machine at a real entry-level priceUnique in this performance class:- Format sliding carriage made of anodized aluminum for the highestcutting precision- Cutting plane directly on the saw blade- Swiveling saw blade unit from 90 - 45 °- Table bracket with aluminum crosscut fence and adjustableStop flap for plates and large workpieces- Rip fence with round bar guide and fine adjustment- Powerful engine- Made in EuropeDimensions and weightsWeight (net) approx. 170kgDust extraction connectionExtraction nozzle diameter 120mmExhaust nozzle diameter saw blade protection 60mmTransport width 680 mmWorking area 1600 mm x 2300 mmSpace requirement 2613.5 mm x 2134 mmPlease add the specified dimensions with the space required to obtain the recommended free space for the dimensions take into account maximum travels or usable lengthsElectrical data400 V supply voltageDrive motor 1.8 kWPhase (s) 3 PhNominal operating mode drive motor S6Current type ACDuty cycle drive motor 40%Mains frequency 50 HzSliding carriage and tableFormat sliding table 1140 mm x 200 mm x 70 mmTable 1024 mm x 224 mm x 900 mmsaw unitCutting width with rip fence 700 mmMax. Cutting height 90 ° 67mmMax. Cutting width to the left of the saw blade 1200 mmMax. Cutting height 45 ° 40mmEdging length 1200 mmSaw blade diameter 250mmSaw blade inclination 90 - 45 °Saw blade speed 3900min¯¹scope of deliverytable extensionAnodized aluminum sliding tableRip fence with round bar guide and fine adjustmentAluminum folding stopEccentricItem No. 5504113 Bedpfx Ajvxr S Reafjcu

Condition: new, - new -manufactured by Holzkrafttype FS 41 elite S Tersa DigitalDigitale version with motorischer Dickentischverstellung- Hobelmessersystem ermögclear opening sekundenschnellescutter change soas particularly geräuscharmer Lon- Besonders lange Abrichttische (2200 mm)aus einem piece ermöglichen leichtes  Abrichten derWerkstücke- Arbeitstische sind aus Grauguss, nachgeglüht andspannungsfrei, dadurch unempfindlich and dauerhaft planar- Gleichzeitiges opening der tables- to rear, gleichzeitig öffnende Abrichttische for kurzeRüstzeiten- Leistungsstarker Industrie-motor- Festmontierte dust extraction hood- robuste steel-/Graugußkonstruktion- Gleichzeitiges opening der tables- großer surface fence (serial-production with auxiliary fence)- Materialvorschub with two speeds aboutspearatem motorTechnische Daten:total length der tables:  2200 mmworking width:   410 mmmax. chip removal: 5 mmthickness:dimensions Dickentisches: 775x410 mmmin/max. working height:  3/240 mmfeed speeds: 6/12 m/elwellen D./Hobelmesser: 95 mm/4 piecerpm:   5000 1/minmotor 400 V/50 Hz/S6 - 40 % 5,0 kW (6,6 PS)suction nozzle diameter: 1 x 120 mmweight:    450 kgArt-No.: 550 3441located in: 97447 Gerolzhofen- free on truck- Bjdpsvwgc Uofx Aafscu