Used Hollow Clamping Cylinder for sale (16,485)

Condition: used, heavy gate clamping cars make Linck type VA help car vy Tsdpfx Afoc Ulvbe Tef

Condition: used, Outer diameter: 60 drilling: 50 mm length: 100 mm material: steel Tedexvchmepfx Af Tef number of revolutions: max. 9,000 rpm

Condition: used, Year of construction: 1992, table length 1 mm table width 1 mm table load 1 t round table plate Ø 600 mm with 3 t-slots (18/30), Slot-distance: 160 mm, with Tsdpsu Sbc Njfx Af Tsf misc. clamping plates and clamping pot!

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Lukas, single-acting light metal cylinder with spring return stroke 50 mm Tedpfxewtm H Dj Af Tjf -Type designation: HP 20/50 -Stamp diameter: 65 mm -Lifting capacity: 20 t -Number: 2x cylinders available -Price: per piece -Dimensions: 140/100/H205 mm -Weight: 6.1 kg/piece

Condition: new, Cylinder, packed in wooden box, cylinder with ceramic heaters for 90mm extruder grooved feed Tjdpfxsua Ti Is Af Tef

Condition: new, Year of construction: 2025, actuation type: hydraulic, number of rollers: 4, roller (top) diameter: 180 mm, side roll diameter: 150 mm, working width: 1,550 mm, sheet thickness (max.): 9 mm, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, STANDARD EQUIPMENT - Highly suitable for bending light and medium sheet metal, as well as aluminum or stainless steel materials - Ideal for rolling materials into round shapes and various diameters - Lower roll and side rolls operate via direct linear hydraulic up/down movement Tjdpfxexw Eane Af Tsf - Protected against overloading - Upper roll driven by electric motor and planetary gearbox. Lower roll driven via cardan coupling system. Two rolls feature powered rotation - Roll positions easily read via three digital indicators - Rolled part can be easily removed thanks to hydraulically opening head - Very easy operation with mobile control panel - Welded steel construction body - SAE 1050 (CK 45) induction-hardened forged or rolled steel shafts - Cone bending device - Hydraulic balancing system for parallel movement of the rolls - Conforms to EU safety standards and CE marked - User manual OPTIONAL EQUIPMENT - Remote assistance via NC control - Upper crane (elevator) for supporting large diameter bending - Hydraulic side supports for large diameter bending - Ground and polished rolls - Dual-speed adjustment system - Infinitely variable speed adjustment - Rotation powered by hydromotor - Extraction system TECHNICAL SPECIFICATIONS Bending Length: 1550 mm Pre-bending: 5/7 mm Bending: 7/9 mm Upper & Lower Roll: 180 mm Side Roll: 150 mm Min. Bending Diameter: 270 / 900 mm Motor Power: 4 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 L Length: 3350 mm Width: 1350 mm Height: 1290 mm Weight: 2900 kg

Condition: used, Technical details: length: 1750 mm width: 1200 mm Todpfx Ajvbz Akjf Tof height: 2500 mm weight of the machine ca.: 11 t

Condition: excellent (used), mileage: 642,477 km, power: 177 kW (240.65 HP), first registration: 11/2008, fuel type: diesel, color: other, axle configuration: 4x2, tire size: 315/70 R22.5, fuel: diesel, wheelbase: 5,000 mm, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel-air, loading space width: 2,500 mm, loading space length: 7,240 mm, loading space height: 2,350 mm, Year of construction: 2008, Equipment: ABS, cruise control, tail-lift, = Additional options and accessories = - (Roof) spoiler - Aluminum fuel tank - Power windows - Fog lights - Radio/CD player - Electrically adjustable side mirrors - Side door - Sun visor - Digital tachograph - Toolbox = Further information = General information Cab: single Registration number: BV-NV-93 Technical information Number of cylinders: 6 Engine displacement: 7,146 cc Axle configuration Tyre size: 315/70 R22.5 Brakes: disc brakes Front axle: Max. axle load: 7,100 kg; Left tyre tread: 20%; Right tyre tread: 20%; Suspension: leaf spring Tjdoxwbaqepfx Af Tef Rear axle: Max. axle load: 11,500 kg; Left tyre tread: 20%; Right tyre tread: 20%; Suspension: air suspension Dimensions Dimensions (L x W): 911 x 255 cm Weights Unladen weight: 8,560 kg Payload: 9,440 kg Gross vehicle weight: 18,000 kg Functional Tail lift: B.A.R. CargoLift Maintenance APK (general technical inspection): valid until 01/2026 Condition Technical condition: very good Optical condition: very good Damages: none

Condition: used, diameter 315 mm Todpfxju Sbiis Af Tjf 3-jaws chuck without jaws.

Condition: good (used), Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box Tjdpfx Afsd I Dbdj Tjf -Execution: difficult -Groove: 24 mm -Grooves spacing: 80 mm -Number: 1x dice available -Price: per piece -Dimensions: 360/285/H245 mm -Weight: 70 kg

Condition: like new (used), Hydraulic Cylinder Condition: Unused, old stock Type: Multiple units available Bore diameter: 200 mm Stroke: 500 mm Rod diameter: 75 mm Retracted length c.c.: 1010 mm Extended length c.c.: 1510 mm Mounting eye diameter: fixed point 80 mm / cylinder rod 75 mm Execution: Double-acting Tedpsxv El Iefx Af Tsf Working pressure: 200 bar Press force: At 200 bar, 60 tons Length: 100.00 cm Width: 30.00 cm Height: 30.00 cm All staff speak Dutch, German, and English Prices are excluding VAT Shipping possible (subject to surcharge) (Subject to changes and errors in technical data, information, prices, and prior sale)

Condition: new, Year of construction: 2025, number of rollers: 4, roller (top) diameter: 180 mm, side roll diameter: 150 mm, working width: 2,050 mm, sheet thickness (max.): 8 mm, STANDARD EQUIPMENT - Ideally suited for bending light to medium gauge steel, aluminum, or stainless materials - Perfect for bending round and various diameter materials - Lower roll and side rolls move up and down hydraulically with direct linear motion - Protected against overload - Top roll driven by electric motor and planetary gearbox; lower roll driven by cardan shaft coupling system; two rolls are power-driven - Roll positions can be easily read via three digital displays - Hydraulically opening head allows for easy removal of bent parts - Movable control panel ensures very easy operation - Welded steel construction frame - SAE 1050 (CK45) induction-hardened forged or rolled steel shafts - Conical bending system - Hydraulic balancing system for parallel movement of the rolls - Compliant with EU safety standards and CE certified - Operating manual included OPTIONAL EQUIPMENT - Remote assistance with NC control - Top crane (elevator) for supporting large diameter bending - Hydraulic side supports for assisting large diameter bending - Ground and polished rolls - Dual speed adjustment system - Infinitely variable speed control - Rotation driven by hydraulic motor - Extractor system TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 4/6 mm Tedpsxw Eahjfx Af Tof Bending: 6/8 mm Top & Lower Roll: 180 mm Side Roll: 150 mm Min. Bending Diameter: 270 / 900 mm Motor Power: 4 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 L Length: 3850 mm Width: 1350 mm Height: 1290 mm Weight: 3300 kg

Condition: used, Technical details: Tjdpovb Ddkofx Af Tof table length: 1400 mm table width: 1400 mm table height: 740 mm weight of the machine ca.: 1 t

Condition: used, Fully hydraulic tensioning carriage Mayrhofer with auxiliary carriage with rails Tsdoxvz E Rjpfx Af Tof Track width: 90 cm Immediately available Location: Austria, near Graz

Condition: used, diameter 200-400 mm different adapting flanges available. Price per pc. Tedpfx Aeu Sbgbef Tjf

Condition: good (used), Clamping jaws, clamping clamps, clamping devices, clamping irons, clamping tools, step clamps, low clamps, clamping irons, power clamps, compact clamps, machine table clamps -Manufacturer: Lenzkes, clamping jaws, machine table clamps -Type: 100-20L -Groove width: 27 mm Todpfxsxup I Ro Af Tof -Number: 2x tensioners available -Price: per piece -Dimensions: 270/80/H150 mm -Weight: 4.4 kg/piece

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 150 mm, side roll diameter: 130 mm, working width: 2,050 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, STANDARD EQUIPMENT - Steel construction main frames - Hydraulic top roll opening head - Movable control panel - Centrally driven rolls powered by electric motor - Hydraulic up/down movement of rear and lower roll - Precision bending with main motor equipped with brake - Conical bending and pre-bending system - Upper and lower roll driven by planetary gearbox - Rear roll ball support system for easier plate handling - Compliance with EU safety directives - High-strength forged steel rolls made of SAE 1050 (CK45) certified steel - Hardened shafts - Digital indicators (2 pcs) - Operating manual OPTIONAL EQUIPMENT - Overhead crane (elevator) for support during large-diameter bending - Hydraulic side supports for large-diameter bending - Ground and polished rolls - Wire grooves on roll ends - NC control unit Tjdpfx Afsxw D Uds Tef - Dual-speed operation - Stepless speed adjustment - Ejector system - Hydromotor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-Bending: 3/4 mm Bending: 4/6 mm Upper & Lower Roll Diameter: 150 mm Side Roll Diameter: 130 mm Min. Bending Diameter: 225 / 750 mm Motor Power: 2.2 + 1.1 kW Bending Speed: 6 m/min Tank Capacity: 25 l Length: 3800 mm Width: 950 mm Height: 1100 mm Weight: 2250 kg

Condition: used, Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 535x250 mm, height 400 mm -Wall thickness: 39 mm -T slots: slot width 18 mm Tedsxunupjpfx Af Tef -Dimensions: see photos / technical drawing -Dimensions: 535/250/H400 mm -Weight: 100 kg

Condition: new, Year of construction: 2025, control type: NC control, degree of automation: automatic, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 180 mm, side roll diameter: 150 mm, working width: 2,550 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, warranty duration: 12 months, Equipment: documentation/manual, emergency stop, foot remote control, STANDARD EQUIPMENT Steel construction main frames Hydraulic top roll opening head Movable control panel Centrally driven rolls powered by motor Hydraulic up/down movement for rear and lower rolls Precision bending with braked main motor Cone bending and pre-bending system Tsdpfx Asxw D Tmsf Tef Lower and upper rolls driven by planetary gearbox Rear roll ball system for easy sheet movement Compliance with EU safety directives High-strength forged steel rolls made from SAE 1050 (CK45) certified steel Hardened shafts Digital indicators (2 units) User manual OPTIONAL EQUIPMENT Top crane (elevator) for support in large diameter bending Hydraulic side supports for large diameter bending Ground and polished rolls Wire grooves on journal ends NC control unit Dual speed operation Stepless speed adjustment Ejector system Hydromotor option TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending: 3/4 mm Bending: 4/6 mm Upper & Lower Roll: 180 mm Side Roll: 150 mm Min. Bending Diameter: 270 / 900 mm Motor Power: 4 + 1.1 kW Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4350 mm Width: 1100 mm Height: 1290 mm Weight: 3070 kg

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table Todpoxuntxofx Af Tef -Clamping angle: for workpiece clamping -Table surface: 535x250 mm, height 400 mm -Wall thickness: 43 mm -T slots: slot width 18 mm -Dimensions: see photos / technical drawing -Dimensions: 535/250/H400 mm -Weight: 106 kg

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 535x250 mm, height 410 mm -Wall thickness: 39 mm -T slots: slot width 18 mm Tjdpfx Asxugyksf Tsf -Dimensions: see photos / technical drawing -Dimensions: 535/250/H410 mm -Weight: 106 kg

Condition: used, Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 535x250 mm, height 400 mm -Wall thickness: 36 mm Tedpfx Afsxugx Hj Tof -T slots: slot width 18 mm -Dimensions: see photos / technical drawing -Dimensions: 535/250/H400 mm -Weight: 97 kg

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 500x390 mm, height 630 mm -Wall thickness: 60 mm -T slots: slot width 22 mm -Dimensions: see photos / technical drawing Tedpoxugw Ajfx Af Tof -Dimensions: 500/390/H630 mm -Weight: 163 kg

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 500x390 mm, height 630 mm -Wall thickness: 65 mm Tsdpfx Ajxugvlof Tof -T slots: slot width 22 mm -Dimensions: see photos / technical drawing -Dimensions: 500/390/H630 mm -Weight: 171 kg

Condition: good (used), Mounting bracket adapter, cross table, for mounting three-jaw chucks, three-jaw lathe chucks -Manufacturer: Scheelen, clamping bracket for lathe -Photo: Short cone 6 -Groove: 70 x 13 mm -Dimensions: see photos -Dimensions: 300/185/H180 mm -Weight: 26.3 kg Tsdpsxugl Hofx Af Tsf