Used Hole for sale (3,336)

Condition: good (used), Plummer block housings, pillow block housings, pillow block housings, pillow block housing units, pillow block housing units, SKF pillow block housings, pillow block housing units -Plumb block bearing: bearing block, inner Ø 50 mm Gbsdpfjiq Tiaox Akyou -Holes: 160 mm spacing x Ø18 mm -Quantity: 3 pillow block housings available - Price: per piece -Dimensions: 210/50/H170 mm -Weight: 3.3 kg/piece

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 2697 € 2000 x 1000 mm 3000 kg 348 kg 100 mm 12 mm 16 mm Gbodpfx Aoyq Srrokyou THIS MODEL FORMS THE BASIS OF THE ENTIRE SYSTEM. IT CAN BE EXTENDED ON ALL FIVE SIDES AS REQUIRED. Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern. 3D standard welding and clamping table, 2000 x 1000 x 100 mm with Cr75M+ hard chrome plating Table system: 16 mm Material thickness: 12 mm Including table substructure and standard table legs * S355J2+N with Cr75M+ hard chrome plating * Hole: 16 mm, material thickness: 12 mm * Including coated table substructure * Side panel 100 mm with 2-row hole pattern and 25 mm hole spacing * Table top with 2-sided fine scaling and 50 x 50 mm grid line * Rounded edges and holes * Solid standard table legs with load capacity 1 tonne per leg; 500 kg per leg for castor model

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 2022 € 1500 x 1000 mm 3000 kg 272 kg 100 mm 12 mm 16 mm THIS MODEL FORMS THE BASIS OF THE ENTIRE SYSTEM. IT CAN BE EXTENDED ON ALL FIVE SIDES AS REQUIRED. Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern. 3D standard welding and clamping table, 1500 x 1000 x 100 mm with Cr75M+ hard chrome plating Table system: 16 mm Material thickness: 12 mm Including table substructure and standard table legs * S355J2+N with Cr75M+ hard chrome plating * Hole: 16 mm, material thickness: 12 mm * Including coated table substructure Godpjyq Srxsfx Akyebu * Side panel 100 mm with 2-row hole pattern and 25 mm hole spacing * Table top with 2-sided fine scaling and 50 x 50 mm grid line * Rounded edges and holes * Solid standard table legs with load capacity 1 tonne per leg; 500 kg per leg for castor model

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 3420 € 2000 x 1000 mm 850 mm 8000 kg 712 kg 200 mm 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. Godpfxswir A Ne Akyebu - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling - Substructure with stiffeners OPTION (PRICE ON REQUEST): Diagonal holes

Condition: good (used), Permanent circular magnet with star-pole arrangement Technical data: Gsdpfx Aezrgy Sskyobu Diameter: 350 mm Central through-hole diameter: 40 mm Features: Flange with Camlock fitting, size 6, diameter: 315 mm Condition: good, technically inspected

Condition: used, empty load weight: 3,900 kg, maximum load weight: 8,000 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 05/2022, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,600 mm, loading space volume: 47 m³, suspension: air, tire size: 245/70R17,5 143J, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245/70R17,5 143J, rear tire size: 245/70R17,5 143J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, At the front, it has portal doors for drive-through loading, at the rear, it also has portal doors, a 27 mm screen-printed floor, 5 rows of aluminum V-stringers, 7 pairs of lashing eyes on the loading platform, an outer frame with lashing holes, a loading height of approximately 1,050 mm, contour marking according to ECE R 048, and at the front, 2 geared winch supports with 2 gears. BPW axles. Gbjdpsz H Iudsfx Akyju -- Subject to printing errors, errors and changes, sample images --. More data can be found at: ! More Details: !

Year of construction: 2026, condition: new, functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, laser power: 20 W, laser wavelength: 1,064 nm, scan area length: 110 mm, scan area width: 110 mm, type of cooling: air, type of input current: AC, laser type: fiber laser, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge - Fiber laser 20 Watt (Optional: 30 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) Gbsdpoznr Srefx Akyeu - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with anti-trap protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials

Condition: good (used), functionality: fully functional, total height: 2,350 mm, total width: 1,200 mm, total length: 2,750 mm, overall weight: 3,500 kg, workpiece weight (max.): 1,000 kg, Workpiece diameter: ø25 - 630 mm (min-max) Torch stroke: 1500 mm Chuck through-hole: ø200 mm Cutting speed: 2000 mm/min Max. workpiece weight: 1000 kg PLC Controller: Siemens C7-633 Cutting process: Plasma cutting or oxy-fuel cutting Country of origin: Germany Gbsdjz H Nzfepfx Akysu Machine (L×W×H): 275 x 120 x 235 cm Machine weight: ca. 3500 kg

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 600 mm, number of axes: 4, This 4-axis HUBER River 600 CNC was manufactured in 2017. It features a traverse of 600 x 400 mm in the X and Y directions, and a Z-axis travel of 300 mm. The machine accommodates electrode diameters ranging from 0.3 to 3.0 mm. If you are looking to get high-quality small hole drilling capabilities, consider the HUBER River 600 CNC die-sinking EDM machine we have for sale. Contact us for further details. Gbodpfx Akjz Hwrloysu - Traverses (X x Y): 600 x 400 mm- Traverse (Z): 300 mm- Electrode Diameter: 0.3 – 3.0 mm

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 200 mm weight 1049 kg dimensions of the machine ca. 2400 x 1200 mm SIEGMUND Authorized Dealer - All items in stock! !! SPECIAL OFFER !! SIEGMUND Retro Welding Table 2400x1200x200, accessories included SIEGMUND welding table just like 25 years ago with plasma nitriding and modern table legs Product Description - Table dimensions: 2400x1200x200 mm - High-quality S355J2 N steel + with plasma nitriding - Material thickness: approx. 24.5 - 27 mm - Hole diameter: 28 mm - Holes arranged in a 100x100 mm grid - Corners, edges, and holes chamfered at 45° - Side panel height: 200 mm - Side panel holes in a diagonal grid - Construction reinforced with ribs Gbjdpfx Aez Hz Ikskysu Plasma-nitrided version: - Protection against rust, scratches, and welding spatter adhesion - Corrosion-resistant / higher load-bearing capacity Specifications: - 28-hole pattern / dimensions 2400 x 1200 x 200 mm - plasma-nitrided version - includes 4x base feet (basic configuration) - Includes accessory set (see Figure 3): * 8x 280626.N * 12x 280511 * 6x 280410.N * 2x 280420.N * 2x 280422.N * 4x 280110.N * 2x 280152.N * 1x 283999

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, foot remote control, Demmeler Ergonomix M-2000 with original set of 2 perforated plates, 2.4 m x 1.2 m, plus octagonal 3D table top, 1.1 m, with 28 mm holes Plasma nitrided Almost unused, like new, in top condition Complete with accessories and technical documentation Gedpfxjz Hvy Uj Akyebu Thanks to the sophisticated arrangement of the entire mechanism, Demmeler’s developers have succeeded in creating an unbeatable large working area while maintaining a small footprint for the Demmeler Ergonomix® M manipulator. The manipulator always positions the heaviest loads in the ideal location. A special feature of the Demmeler Ergonomix® M product family is the large swivel range up to 180°. This provides a decisive advantage for many workpieces, allowing them to be completely machined in a single setup without additional rotation. Load capacity 2000 Model M2000 A = min 490 B = max 970 C = max 1480 D = max 1000 Torque 1250 Tilt angle 180° Tilt moment 8000

Condition: good (used), Year of construction: 1991, Hydraulic press, two-column press, oil hydraulic press, hydraulic press, high-speed press, high-speed hydraulic press -Manufacturer: Hans Schoen, Hydraulic press type SH 100 -Pressing force: 160 tons -Motor: 22 kW -Clamping table: 810 x 870 mm -Max. insertion height: 500 mm -Max. stroke: 250 mm -Hole: Ø 50 mm -Documents: Operating instructions/circuit diagram Gbodpfxsz H U Rfe Akyju -Dimensions: 1900/1800/H4200 mm -Weight: kg

Condition: used, No. 04554 Granulator / cutting mill Alpine RO 40/63 Used Robust granulator / cutting mill for the size reduction of plastics, blown film and cables Motor power 22 kW Rotor width 630 mm Rotor diameter 400 mm Rotor knives: 5 rows with 3 knives each Stator knives: 1 row at the front and 2 rows at the rear, with 3 knives per row Maximum permissible speed of the drive shafts 560 rpm 2 inspection openings Screen hole diameter approx. 12 mm Feed opening approx. 630 x 300 mm LW Feed hopper dimensions approx. 850 x 600 mm LW The hinged screen holder allows easy screen changes and facilitates access for cleaning the machine and replacing the knives. Ideal for recycling applications (blown film, cables, plastics, etc.) and food processing (tea, spices, dried vegetables, etc.). Machine ready to plug in, incl. power cable and 63 A plug Transport dimensions machine approx. 1600 x 1500 x 1800 mm LWH, hopper approx. 1400 x 1200 x 800 mm LWH Weight approx. 2500 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale Gsdpfsz Iav Aex Akyobu For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: as good as new (ex-display), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, workpiece height (max.): 60 mm, workpiece width (max.): 60 mm, workpiece length (max.): 140 mm, feed rate X-axis: 12 m/min, with approximately 4000 m of operating distance. Comes with a new machine warranty. The machine is sold without the depicted return system. The minimum workpiece width varies depending on the workpiece length, height, and surface quality: 70. Processing of roll material in thick PVC/ABS from 0.4–3.0 mm & strip material with a thickness of 0.4–12 mm. “e-motion” control system with an 18” touch-color screen with integrated maintenance software and available network connection. Stable machine stand made of steel. Extendable workpiece support facilitates working with large workpieces. Motor-controlled, positionable pressure bar with 2 offset arranged roller guides for even pressure distribution on the workpiece. Chain feed with rubberized support pads for optimal hold on the workpiece. Ball-bearing roller support plate with Ø 770 mm. Feed guide rail with sliding rollers for sensitive materials. Edge trimming unit with tool-controlled diamond cutters and 2 motors each with 1.5 kW, 12000 rpm. Chip removal is adjustable from 0–3 mm via motor-controlled positioning, including 2 diamond cutters Ø 80 mm, H 49 mm, Z2+2. Edge detection using an infrared sensor. Shear cutter for pre-capping thick PVC/ABS edge materials. Teflon-coated gluing unit with a capacity of 1.5 kg, application via a finely adjustable glue roller & quick-change system, as well as heating cartridge monitoring (~ 250 m/min per 1 kg of granules on a 19 mm board). Reversing function for the glue tank. Ideally suited for applying solid wood edge strips or laminate edges. Pneumatically tool-controlled gluing unit. Motor-controlled, positionable pressure unit with 1 large driven pressure roller and 2 conical follow-up rollers, pneumatically pre-tensioned. Cutting saw unit with 2 independent motors each with 0.50 kW, 12000 rpm, pneumatically swiveling 0–15°. Multi-function trimming unit for radius, flush and chamfer trimming of thin edges with 2 independent motors each with 0.75 kW, 12000 rpm, motor-controlled edge adjustment & pneumatic retraction function from the control panel. Corner processing unit for soft- and post-forming workpieces for processing the end edges with 0.4–3.0 mm edge thickness & 10–60 mm workpiece height. 2-axis motor-controlled, positionable radius drawing blade unit including pneumatic retraction function. Polishing unit with 2 motors. Special equipment 020 Surface drawing blade, pneumatically tool-controlled 032 Spray device for cleaning agents before the polishing unit 042 Spray device for release agents on the machine infeed side (PUR adhesive) 046 Extended feed guide rail (+400 mm) 047 Edge trimming cutter with interchangeable inserts, 64 mm height instead of 49 mm, 2 motors each with 2.2 kW instead of 1.5 kW 051 Multi-function trimming unit with vertical multiple rollers for processing workpieces with pot-band holes 053 Spraying of lubricant Pneumatic-mechanical insertion lock to prevent premature feeding of the machine 059 Automatic lubrication for the chain conveyor 064 Pneumatic-mechanical insertion lock 067 Reversing function for the glue tank. Ideally suited for applying solid wood edge strips or laminate edges. 050A Additional interchangeable glue tank, counter-rotating 090 “classic” multi-function & radius drawing blade unit e-motion with radius 1+2 mm Gedszcymhspfx Akyebu 071 Motor-controlled adjustment and positioning for corner rounding cutters 085 Preparation for u-motion professional 033 LED lighting 505 Exhaust distributor professional Includes delivery & inst

Condition: good (used), Aluminum measuring table with a 50 mm aluminum plate and drawer cabinet Type: Measuring table with aluminum measuring plate Dimensions: Width: 80 cm Depth: 75 cm Height: 95 cm (97.26 cm high with frame) Aluminum plate: 5 cm thick, with threaded holes Manufacturer of drawer cabinet: Garant (Hoffmann Group) Number of drawers: 2 Material: Aluminum Godpfxohvmkij Akyebu Condition: used Complete factory liquidation, large selection of storage platforms, pallet racking, shelving systems, and paternosters. High-quality industrial machines, lathes, grinding machines, and hand tools. More new and used items can be found in our shop! International shipping costs available upon request!

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,780 kg, maximum load weight: 23,220 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 6,500 mm, loading space width: 2,520 mm, loading space height: 860 mm, total length: 10,890 mm, total width: 2,550 mm, total height: 860 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, color: original, Year of construction: 2026, Equipment: center pivot plate, Tailor-made transport solution Configure your Fliegl vehicle to your requirements. The vehicle shown is an example. Production and specification are customised to customer requirements. Gbodpfx Asznwzrekyeu #Low Loader Drawbar Trailer Chassis Welded steel construction Turntable with heavy-duty ball race Folding rear support legs 2 wheel chocks with holders Aluminium side underrun protection Full-width rear mudflap Half-shell mudguards on 1st axle with anti-spray mudflaps Anti-spray mudflaps behind 2nd and 3rd axles 1 lockable plastic toolbox, W 600/H 425/D 460 mm Extendable outriggers to 3,000 mm Central storage compartment for timber planks 70 mm timber planks for 3,000 mm extension #Lashing Points Low Loader 1 pair of recessed 10 t lashing cut-outs in front gooseneck side members 4 pairs of 5 t lashing holes in gooseneck outer frame 7 pairs of recessed 10 t mushroom lashing points in top and side outer frame 1 on front gooseneck 6 in low bed First lashing point 250 mm from front, last max. 250 mm from rear 5 pairs of combined stake pockets with bolted ring lashing eyes, 5 t each, recessed in outer frame, approx. 72 x 42 mm internal size 2 pairs of additional 10 t folding lashing rings 1 on gooseneck (protruding) 1 recessed in floor behind last axle #Drawbar Equipment Drawbar with certified 40 mm towing eye Spring-assisted drawbar height adjustment #Axles + Suspension Drum brake axles, manufacturer's choice "Achsen-/Fahrwerk laservermessen" reduces tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushes and mechanical axle load equaliser #Wheels and Tyres 235/75 R 17.5 steel wheels, twin fitment, factory silver #Braking System Twin-line air brake system Spring parking brake 2 non-interchangeable front coupling heads 24 V ABS and ALB with front ABS plug #Electrical System 24 V LED multi-chamber lights, yellow side LED lights, LED number plate light 2 front white LED position lights 2 rear white/red LED outline marker lights 2 x 7-pin non-interchangeable front plugs 1 LED beacon with bracket 2 pairs of illuminated LED warning boards, extendable to 3,000 mm #Floor Front gooseneck with steel chequer plate Recessed storage box in transition to gooseneck Approx. 70 mm softwood floor, steel chequer plate in wheel arch area Rear bevel with 70 mm softwood floor Low loader deck incl. rear bevel: 6,500 mm #Loading Ramps Steel ramps, 3,000 mm long, 750 mm wide, laterally adjustable Additional folding lower ramp lock Timber-covered (steel chequer plate at ramp tips) Hydraulic operation via PTO with flow control, left-hand side operation in direction of travel Hydraulic connection with SVK plug NW 10/3 incl. connecting hose #Registration / Plates 24/7 service hotline "Gewährleistungsverlängerung auf Rahmen auf 5 Jahre ab Auslieferungsdatum" Prepared for two-line number plate holder Reflective contour markings to ECE R 048, white sides, red rear #Paint Finish Chassis hot-dip galvanised incl. passivation "15 Jahre Gewährleistung gegen Durchrostung" Galvanised drawbar Hot-dip galvanised loading ramps

Condition: as good as new (ex-display), functionality: fully functional, This single-sided heavy-duty cantilever rack is ideal for storing heavy long goods such as pipes, profiles, metal bars, steel beams, wooden strips, and sheet material. With a total length of approximately 13.20 meters, a height of approximately 4.00 meters, and cantilever arms of approximately 120 cm, this long goods rack offers a high storage capacity across a total of 4 storage levels (floor level + 3 levels). Each cantilever arm supports up to 500 kg, and the uprights can support up to 2,250 kg. The cantilever arms are bolted on and can be flexibly adjusted in height via a hole grid of 200 mm. The completely hot-dip galvanized material ensures long-lasting protection both indoors and outdoors – new goods available from the Wietmarschen warehouse. PRODUCT DETAILS: Godpfx Akjz Iw Trjysbu - Rack type: single-sided heavy-duty cantilever rack - Total length of the rack row: approx. 13.20 m - Total height: approx. 400 cm - Arm length: approx. 120 cm (made of IPE 80) - Center distance (upright spacing): approx. 131 cm - Levels: floor level + 3 storage levels - Load capacity per arm: max. 500 kg (with uniform distribution) - Load capacity per upright: max. 2,250 kg (with uniform distribution) - Upright profile: IPE 160, approx. 400 cm, including base - Hole grid upright: approx. 20 cm - First hole above base: approx. 107.5 cm (from top of base) - Top hole pair: approx. 50 cm below the upright head (from top of head) - Design: single-sided, cantilever arms bolted on - Surface: completely hot-dip galvanized - Availability: new goods SCOPE OF DELIVERY: - 11 x uprights, approx. 400 cm made of IPE 160, including base, hole grid 20 cm - 33 x cantilever arms, approx. 120 cm made of IPE 80 (without end stops) - Including all connecting elements - Including all necessary screws - 1 x load sign Price: €5,750.00 net €6,842.50 gross You will receive an invoice with VAT shown. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery by our partner shipping company – freight costs depend on the postal code - Professional assembly and disassembly by trained teams is optionally available - Rack inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers is also possible PLANNING & CONSULTATION: Our planning department will be happy to prepare a non-binding offer for you – tailored to your individual requirements. Whether it's a new installation, renovation, or expansion – we will provide you with competent advice on your rack configuration. Haven't found the right one yet? Visit our website – here you will find a quick overview of many offers and variations of the products! ARE YOU INTERESTED OR DO YOU HAVE QUESTIONS? Simply contact us via message or phone call. You will find our telephone number on our company website. You can reach us by telephone from Monday to Friday, 08:00 - 16:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Condition: new, Pallet racking, hot-dip galvanized, for outdoor use Specifications: - H: approx. 450 cm - D: approx. 110 cm - L: approx. 8.40 meters - Load capacity: 3000 kg per shelf - Uprights in hot-dip galvanized steel - Beams 270 x 14 x 5 cm, T30 - Beams in hot-dip galvanized steel - New product BLT / PR45 FVZ - Manufactured in Europe & tested according to current DIN EN 15512 standard. - 100% quality at the best price. Racking consists of: - 04 x uprights approx. 450 cm x 110 cm, pre-assembled. - 12 x beams approx. 270 x 14 x 5 cm, T30. - 24 x safety pins. - 24 x locking screws M8 x 20 incl. nut. - Levels: base + 2 - 27 pallet spaces incl. base spaces. -- MULTIPLE UNITS IMMEDIATELY AVAILABLE -- Price: €1900.00 net plus applicable VAT. You will receive an invoice with VAT shown. Delivery: Gedpfoz Iw D Rsx Akyjbu Delivery can be arranged through our partner shipping company if required; the costs depend on the postcode. Assembly: Our trained personnel will be happy to assist you with the professional assembly and disassembly of your equipment, if required. Our recommendation: Please let us know your requirements... We will gladly help you with the implementation of your projects, from planning to ordering and assembly. Customer note: When assembling the safety pins/locking screws, any holes that may have been sealed by the hot-dip galvanizing process may need to be re-drilled. Unfortunately, this cannot be completely ruled out with high-quality hot-dip galvanizing. If you have any questions, please do not hesitate to contact us.

Year of construction: 2002, condition: excellent (used), functionality: fully functional, BOGRAMA Punching Machine – Multi BSM 450/220/15 - Manufacturer: BOGRAMA AG, Switzerland - Type: BSM 450/220/15 - Year of Manufacture: 2002 - Machine No.: 038/02 - Working Width: max. 450 mm - Performance: up to approx. 12,500 cycles/hour (depending on material and format) - Punching/Cutting Thickness: - Hole perforation: up to approx. 2 mm - Binder hole: up to approx. 5 mm - Cutting: up to approx. 5 mm - Strip steel cutting: material-dependent - Sheet Alignment: pneumatic front and side guides - Cycle Control: via photocell - Compressed Air Connection: 6 bar - Electrical Connection: 3 × 400 V / N / PE, 50/60 Hz - Fuse: 32 A - Applications: Punching, cutting, perforating, and hole punching Gbsdpfoz I Ug Asx Akysu

Condition: excellent (used), mileage: 590,000 km, power: 375.1 kW (509.99 HP), fuel type: diesel, maximum load weight: 15,000 kg, overall weight: 26,000 kg, tire condition: 90 %, axle configuration: 6x2, wheelbase: 4,500 mm, fuel: diesel, color: red, driver cabin: sleeper cab, gearing type: automatic, suspension: air, loading space length: 8,800 mm, loading space width: 2,550 mm, Year of construction: 2023, Equipment: ABS, Android Auto, Apple CarPlay, Bluetooth, EBS, air conditioning, blind spot assist, cable winch, cruise control, differential lock, electronic stability program (ESP), hill-start assist, lane keeping assist, navigation system, onboard computer, parking heater, power assisted steering, retarder, seat heater, second fuel tank, tachograph, traction control, trailer coupling, Vehicle purchased and serviced at an authorised MAN service centre, full documentation, tyres 90% NEW, GALVANISED car transporter body, reinforced for heavy loads, with a hydraulically operated ramp – year of manufacture X.2026 NEW Dragon Winch DWT 16000 HD with wireless remote control and traverse function Extensive equipment package – including the top-of-the-range GX cab, LED headlights, ventilated seats, leather/Alcantara upholstery, audio system with subwoofer – further equipment details below Godpfx Akoz I Udzeysbu Bodywork specifications: – fully galvanised – overall length: 880 cm – flatbed length: 640 cm – width: 255 cm – driving height: 105 cm, – hydraulically extendable ramp from the tailgate, ramp length 220 cm – Lohr-type load-securing points – additional enlarged holes for securing chains – fold-out loading supports Vehicle specifications: – 2023 – Gearbox: Automatic – Mileage: 590,000 km – Power: 510 km – Euro 6 – Gross vehicle weight: 26,000 kg – Payload: 15,000 kg Vehicle equipment: GX cab front/rear air suspension lift axle LED headlights retarder sleeper cab with 2 beds webasto navigation Man Sound System audio air conditioning fridge pneumatic driver’s and passenger’s seats leather/Alcantara upholstery heated and ventilated driver’s seat adaptive cruise control cornering collision warning system lane departure warning system hill start assist eco roll If you have any questions, feel free to contact us by phone or WhatsApp Please contact us before your visit to confirm availability and arrange a viewing. Additionally, we offer: Export plates and insurance Transport to any location within the EU, Export documentation Ask the seller for details.

Condition: excellent (used), Year of construction: 2020, Pallet racking system PR9000 for 36 Euro pallets This pallet racking system is tested according to DIN EN 15512 with a maximum load of 2,200 kg per crossbeam and therefore has a maximum bay load of 9,000 kg and can be loaded with 550 kg per pallet. Gbedjv Hp Tuopfx Akysu The anti-slip protection prevents goods from slipping through when shelf levels are arranged in parallel. Made of solid, high-quality steel for extreme durability. Withstands high loads of up to 9,000 kg per bay without any problems. High-quality workmanship of the entire pallet racking system. Plenty of storage space thanks to 3 levels and 3 bays. Eye-catching color scheme in blue and orange for maximum safety. Upright profile: Height: 5500 mm Material: Steel S-355 JR Dimensions: 80 mm (W) x 70 mm (D) x 1.5 mm (H) Hole spacing: 50 mm (grid – staggered) Surface: Blue powder-coated Profile construction: Omega profile Depth: 1100 mm Manufacturing process: Cold-rolled profile Load capacity: 9000 kg The crossbeam: The crossbeams can be individually adjusted in height in 50 mm increments. Total load capacity per crossbeam level: 1800 mm crossbeam: 2000 kg 2700 mm crossbeam: 3000 kg 3600 mm crossbeam: 2200 kg Material: Steel S-235 JR (cold-rolled steel) Profile structure: Rectangular profile Fastening: Hook tabs on both sides of the crossbeam for hanging, secured with a locking pin. Surface: Powder-coated, orange Manufacturing: Folded steel sheet Scope of delivery 4 x uprights PR9000, 5.5 m high / 110 cm deep, load capacity: 9,000 kg 18 x crossbeams PR9000, 3,600 cm wide incl. locking bolts, load capacity per shelf: 2,200 kg 9 x anti-slip protection PR9000, 3,600 mm Delivery 2020–2022 You can find more items – new and used – in our shop! International shipping costs on request!

Condition: new, Year of construction: 2026, CORMAK WS20 Bench Drill Press The CORMAK WS20 Bench Drill Press is a professional column drilling machine for metal, designed for drilling and tapping operations in industrial environments. Thanks to its robust construction, large spindle travel, and automatic tapping function, the machine delivers excellent performance and precision in metalworking applications, particularly when machining structural steel. Main Advantages of the Machine - Tapping function with automatic reversal to counterclockwise rotation – enables fast and safe thread tapping up to M16 in steel. - High structural rigidity – an 85 mm diameter column and seasoned cast iron components, including the drill head, base, and worktable, ensure stability and effective vibration damping. - 135 mm spindle travel – allows deep-hole drilling without the need to reposition the workpiece. - Belt drive system – provides five precisely selected spindle speeds ranging from 280 to 1875 rpm. - Safety guards with limit switches – CE compliance and enhanced operator safety. - Large worktable with 360° rotation and mounting slots – provides flexibility when clamping and positioning workpieces. Construction and Technology The CORMAK WS20 Bench Drill Press for Metal features a robust construction made from high-quality materials. The spindle and transmission shafts are manufactured from hardened steel, ensuring excellent resistance to wear. The drill head, column, and worktable are made from precisely machined, seasoned cast iron components, providing high rigidity throughout the entire structure. The MT2 Morse taper enables quick tool changes and allows the use of various cutting tools. Precision and Operating Efficiency Thanks to its stable column, large spindle travel, and carefully engineered transmission system, the machine ensures precise and repeatable drilling and tapping operations. The clear and easy-to-use control panel simplifies machine operation, while the powerful 1.1 kW motor provides efficient performance, even when machining difficult-to-cut materials. Applications The CORMAK WS20 Column Drill Press is ideally suited for use in: - Industrial manufacturing facilities. - Mechanical workshops. - Maintenance departments. - Technical schools and training centers. The machine is designed for drilling and tapping operations in steel, aluminum, and non-ferrous materials. Standard Equipment - Keyed drill chuck - Morse taper drift for tool removal - U-shaped spindle guard with safety limit switch - Belt drive guard with safety limit switch Technical Specifications Maximum drilling diameter (steel) 20 mm Maximum tapping size (steel) M16 Spindle travel 135 mm Spindle taper MT2 Spindle speed range 280–1875 rpm Number of spindle speeds 5 Column diameter 85 mm Column wall thickness 12.7 mm Spindle-to-column distance 260 mm Spindle-to-table distance 366 mm Spindle-to-base distance 678 mm Table dimensions 300 × 320 mm Base dimensions 376 × 566 mm Motor power 1.1 kW Gjdpfx Aerif Trokyebu Power supply 400 V Net weight 179 kg Machine dimensions 800 × 450 × 1250 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: 30282, control type: manual, punching force: 40 t, punching diameter: 32 mm, stroke rate (min.): 25 1/min, sheet thickness (max.): 10 mm, oil tank capacity: 50 l, overall weight: 1,400 kg, Equipment: CE marking, emergency stop, foot remote control, FICEP 401 Serial number 30282 Year of manufacture 2008 Ficep hydraulic single-punching machine Model 401 Punching force 40 tons / 400 kN Maximum standard thickness 10 mm (steel) Punching diameter 32 mm Gsdsz N Al Depfx Akyebu Maximum diameter for material thickness 32 mm x 10 mm Throat 510 mm Maximum punching speed (strokes per minute) 25 spm Maximum punching stroke 40 mm Oil tank capacity 50 liters Working height 950 mm Dimensions: L 695 mm x W 1410 mm x H 1610 mm Motor power 4 kW / 5.5 HP Machine weight 1.4 tons Safety systems The machine complies with CE directives Includes a selection of new punch and die sets for round holes.

Condition: used, Year of construction: 2018, Startech cn MAIN FEATURES FLEXIBLE AND CUSTOMIZED PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP OF THE PLATE ALLOWS ABSOLUTELY PRECISION MACHINING NUMERICAL CONTROL WITH 7" COLOR SCREEN: SIMPLE AND INTUITIVE TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting work area mm 0 x 800/0 x 800 X-axis stroke mm 750 Max. travel speed of the X-Y axes m / min 25 DRILLING UNIT Vertical spindles number 7 (4X-4Y one of them common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed groove saw (direction) X Diameter of the groove saw mm 100 Max. thickness of the groove saw mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Speed of the groove saw rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air demand bar 6 Compressed air consumption Nl/cycle 90 Extraction demand m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 120 GENERAL CHARACTERISTICS Universal CNC drilling machine with work table with fixed gantry and movable workpiece for performing the following machining operations: - Vertical drilling on the panel surface - Horizontal drilling on all four sides of the workpiece - Groove Milling with integrated groove saw in the "X" direction. Self-supporting structure. Machine frame made of tubular steel to provide a large base for the work table. The structure is positioned on three self-leveling feet. The electrical control cabinet is integrated into the machine frame. "Easy Motion" central Bakelite support table: - an MDF sector for through-hole drilling, automatically pivoting for horizontal drilling - an infeed roller that facilitates panel loading - a rear roller conveyor that facilitates panel sliding - left and right stops - a central aligner with manual adjustment. The left and right stops are required to drill the two opposite sides of the panel horizontally in the "X" direction. Panel positioning along the X axis is achieved by means of suction cups. Unit support. This is a gantry structure made of tubular steel. The main machining unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with a single drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit Positioning of the workpiece and drive of the machining unit A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the machining unit during machining. The movement in X and Y axis is carried out on THK guides with transmission on reinforced toothed Movement in Z axis is carried out pneumatically on "ball-bushing" guides with positioning on stop adjustable via the positioning of the working units is carried out via technology and drives with -CONTROL The control was specially developed for use Gedpfxevwbp As Akyjbu

Condition: used, Year of construction: 2025, color: other, empty load weight: 2 kg, fuel type: gasoline, gearing type: other, TITLE: NEW FLAT-BED HOOK-UP CONTAINER WITHOUT SIDES AND ZERO TAIL FOR LOADING VEHICLES WITH REINFORCED FLOOR SUPPORTED BY 200 MM BEAMS REINFORCED BY 2.50 METRES IN THE CENTER ON THE EXTERNAL PART PLUS REINFORCEMENT AT THE FRONT YIELD POINT, 2 HIDDEN ANCHOR HOOKS AND HOLES ON BOTH SIDES H. 20 CM AND 1 CM PLATE REF. : 22-N-62 TYPE: C hook lift platform NEW: yes COVER: no OPENING: / OVERALL DIMENSIONS TOTAL LENGTH: 7.20 mt INTERIOR/EXTERIOR WIDTH: 2.53 mt / 2.55 mt FRONT SIDEBOARD: 1.40 mt REAR SIDEBOARD: / SIDEBOARD:/ WEIGHT: 1880 kg BOTTOM: 7 mm chequered WALL: / COLOR: greyErrors and/or omissions excepted The prices shown do not include VAT. Please contact the sales team for an updated comparison of prices and conditions. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sector of sale and purchase of industrial and commercial vehicles specialized mainly in the waste sector. Gjdpfev Dyrpjx Akyobu Specialized in trucks, trailers and hook-lift equipment. With a fleet of vehicles ready for delivery of over 50 trucks and over 150 skips, containers with and without hook-lift cranes. S.E.&O Given the quantity of ads and details entered, Aurora invites you to verify the correctness of the data entered with the sales staff.