Used Hob Sharpening Machine for sale (64,225)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 800x1000x1600 mm Rjdpfx Asvz Ht Ijhzobt Weight 350 kg Total power requirement 0,6 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1400x780x1500 mm Weight 500 kg Total power requirement 2 kw Rbsdpfx Ajvz Htuehzot

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1100xx750x1380 mm Weight 450 kg Total power requirement 0,5 kw Rbedpovz Htnjfx Ahzjt

Condition: good (used), Year of construction: 1975, Schmid saw blade sharpening machine Saw blade sharpening machine type AS 4 for circular saw blades diam.: 20 - 400 mm for circular cut-off saws up to diam.: 550 mm tooth pitch up to: 22 mm with dividing disk: 28 mm Saw blade width up to: 6.0 mm Grinding wheel diam.: 150 mm Grinding wheel speed: 3500 rpm. Infinitely variable speed control: 70 - 200 rpm. Drive power: 0.55 kW - Base frame - Grinding wheel - accessories used Rsdpfxeq S Uwbj Ahzobt

Condition: ready for operation (used), Year of construction: 1978, operating hours: 4,500 h, functionality: fully functional, workpiece weight (max.): 2,000 kg, wheel width: 600 mm, feed length X-axis: 600 mm, feed length Y-axis: 600 mm, feed length Z-axis: 600 mm, rotary table diameter: 1,020 mm, position of the milling head: +-45 degrees, table diameter: 1,020 mm, feed rate X-axis: 8 m/min, feed rate Y-axis: 4 m/min, feed rate Z-axis: 2 m/min, total length: 4,500 mm, wheel diameter: 1,550 mm, gear diameter: 1,550 mm, total height: 3,300 mm, total width: 2,100 mm, input current: 50 A, input frequency: 50 Hz, workpiece diameter (max.): 1,580 mm, milling spindle length: 380 mm, type of input current: three-phase, milling length: 600 mm, spindle speed (max.): 200 rpm, table bore: 235 mm, spindle speed (min.): 28 rpm, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, grinding spindle motor power: 11,000 W, outer diameter: 1,580 mm, overall weight: 16,000 kg, rotational speed (max.): 200 rpm, rotational speed (min.): 28 rpm, table load: 2,000 kg, mount diameter: 235 mm, helix angle: 45 °, tool diameter: 235 mm, Equipment: documentation/manual, rotational speed infinitely variable, Gear Hobbing Machine — WMW MODUL ZFWZ 1250 The MODUL ZFWZ 1250 is a heavy-duty gear hobbing machine designed for accurate machining of large spur and helical gears. Manufactured in 1978 by WMW MODUL (Germany), the machine is known for its robust cast-iron construction, high rigidity, and long-term reliability in demanding industrial environments. The machine is capable of machining gears with a maximum gear diameter of 1,550 mm and a maximum workpiece diameter of 1,580 mm, handling workpieces weighing up to 2,000 kg. It offers a cutting (wheel) width of 600 mm and supports gear hobs with a diameter of up to 235 mm, making it suitable for medium to large gear production. Rbsdjx I Ntpspfx Ahzjt The hobbing spindle features infinitely variable speed control from 28 to 200 rpm, allowing precise adjustment for different materials and cutting conditions. For helical gear machining, the machine is equipped with a tilting milling head (±45°), providing flexibility for various gear geometries. A large rotary table with a diameter of 1,020 mm ensures stable and secure clamping of heavy workpieces. The machine is driven by an inverter-controlled main motor with a power of 11 kW, delivering reliable cutting performance under continuous operation. Power supply is three-phase, 50 Hz. With an overall machine weight of approximately 16,000 kg, the ZFWZ 1250 offers excellent vibration damping and machining stability. The machine is fully functional, ready for operation, and suitable for both production and refurbishment of large industrial gears. Key Features: *Gear hobbing for spur and helical gears *Maximum gear diameter: 1,550 mm *Maximum workpiece weight: 2,000 kg *Cutting width: 600 mm *Gear hob diameter: 235 mm *Infinitely variable spindle speed: 28–200 rpm *Tilting milling head: ±45° *Heavy-duty industrial cast-iron construction *Inverter-controlled main motor: 11 kW Typical Applications: *Heavy gear manufacturing *Large transmission components *Industrial gear production and refurbishment

Condition: ready for operation (used), Year of construction: 1966, operating hours: 10,000 h, functionality: fully functional, workpiece weight (max.): 3,000 kg, wheel width: 400 mm, feed length X-axis: 483 mm, feed length Y-axis: 381 mm, feed length Z-axis: 521 mm, rotary table diameter: 740 mm, table diameter: 740 mm, total length: 4,500 mm, wheel diameter: 1,000 mm, gear diameter: 1,000 mm, total height: 2,450 mm, total width: 2,450 mm, input frequency: 50 Hz, workpiece diameter (max.): 1,000 mm, type of input current: three-phase, spindle speed (max.): 200 rpm, table bore: 89 mm, spindle speed (min.): 50 rpm, grinding spindle motor power: 7,500 W, overall weight: 8,000 kg, rotational speed (max.): 200 rpm, rotational speed (min.): 50 rpm, table load: 3,000 kg, helix angle: 45 °, Equipment: documentation/manual, rotational speed infinitely variable, Machine Description — Churchill U 3615 Gear Hobbing Machine The Churchill U 3615 is a heavy-duty gear hobbing machine designed for accurate and reliable cutting of spur and helical gears in industrial production environments. Built with a rigid cast-iron structure, the machine ensures excellent stability, low vibration, and consistent machining quality during continuous operation. Rjdpfx Aex Itfiehzjbt The machine is capable of cutting gears with a maximum diameter of 1,000 mm without tailstock and 863.6 mm with tailstock, and supports workpieces weighing up to 3,000 kg. A maximum gear face width of 400 mm and a maximum module of 10 allow machining of medium to large-sized gears. The rotary table has a diameter of 740 mm, is equipped with six T-slots, and features a table bore of 89 mm, providing secure and precise workpiece clamping. The machine supports helical gear cutting up to ±45°, expanding its application range. The hobbing spindle accepts tools up to 180 mm in diameter and 240 mm in length. Spindle speed is infinitely variable from 50 to 200 rpm, allowing optimal cutting conditions for different materials and gear geometries. Feed movements are controlled via P.I.V. variable drives, offering smooth and precise adjustment of vertical, horizontal, and tangential feeds, as well as intermittent and continuous hob shifting. The machine is powered by a 7.5 kW main motor and operates on three-phase power at 50 Hz. With overall dimensions of approximately 4,500 × 2,450 × 2,450 mm (L × W × H) and a total weight of around 8,000 kg, the Churchill U 3615 is a solid and dependable solution for heavy-duty gear manufacturing. Manufactured in 1966, this machine is fully functional, ready for operation, and supplied with a full set of change gears, technical passport, and operator’s manual, making it well suited for workshops seeking a proven and durable gear hobbing solution. Overall, the Churchill U/PH 3615 offers: -Heavy-duty, industrial-grade build quality -Large part capacity and flexible travel ranges -Adjustable spindle speeds and feed rates -Reliable operation for continuous gear production

Condition: excellent (used), Mikron Gear Hobbing Machine A33/0 – for Module 0.5 to 2.5 – rarely used Manufacturer: Mikron Model: A33/0 – Gear Hobbing Machine (vertical) Version: Base machine with standard milling head Condition: used, very good condition, machine has been rarely operated Color: green Technical Data Max. workpiece diameter: approx. 80 mm Max. hobbing length: approx. 150 mm Module range: approx. 0.5 – 2.5 Ideal for small gears in the module range 0.5 – 1.0 Rbedsx A D Izjpfx Ahzst Main drive: 3 kW Electrical connection: 3 x 380 V AC, 50 Hz Total power consumption: approx. 9.5 kVA Dimensions & Weight L x W x H: approx. 1,450 x 1,380 x 2,080 mm Weight: approx. 2,200 kg Special Features Very well-suited for manufacturing small gears (module 0.5 – 1.0) Machine was rarely used in production, therefore minimal wear Availability / Service Detailed photos and operating video available upon request Quotation including price, delivery terms, and lead time possible Subject to prior sale and errors.

Condition: excellent (used), Knife grinder MVM model K250 with tilting magnet mm 3100 long, grinding wheel motor 13,5 KW Rsdpswt Dfdofx Ahzjbt

Condition: excellent (used), The DNDA type pointer–chamfering machine is designed for forming conical points or chamfering the ends of shafts, rods, and stakes. Feeding and rotation of the workpiece are performed manually. Min. length of workpieces: 700 mm Disc rotational speed: 1060 rpm Number of cutting knives: 6 pcs Motor: 4 kW Extractor nozzle diameter: Ø 160 mm Required air flow for chip extraction: 850 m3/h Table height above floor: 730 mm Rbodpfx Aox E Eh Rehzot Overall dimensions: Length: 960 mm, Width: 880 mm, Height: 1300 mm Weight: 280 kg

Condition: used, STRAUSAK HS 30 is a Hobbing machine engineered for precision work, offering high accuracy and reliability. Workpiece Ø 0.2–35 mm; max module 1.00; max cutting length 22 mm; teeth 2–390; cutter Ø 6–24 mm. Cutter speeds stepless 400–13,000 t/min. Voltage 50 Hz, 3x380 V; weight ≈600 kg; dimensions L800×W800×H1450 mm. Fitted with PLC control, loading attachment, parts catcher, lamp and coolant system. Delivers tight tolerances; typical applications: automotive, watchmaking, machine tools, aerospace, medical. Rbsdpfx Aoxyxxiohzjt

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, General Machine Information Machine Type: CNC Gear Hobbing Machine (Abwälzfräsmaschine) Control Unit (CNC): Siemens SINUMERIK 840D (Digital) Year of Manufacture: 2002 Machine Weight (Approximate): 9500 kg (9.5 tonnes) Rsdpfxsx Ezyvj Ahzebt Total Connected Load (Approximate): 25 kVA – 35 kVA Workpiece and Machining Capacity Maximum Workpiece Diameter: 150 mm Maximum Module (Nominal for Steel): 3 mm (up to 5 mm possible depending on conditions) Maximum Workpiece Length (Axial Travel): 450 mm Maximum Workpiece Weight (Table Load): 15 kg Workpiece Table Diameter: 145 mm Table Speed (Max.): Up to 800 min⁻¹ (rpm) Hobbing Tool Spindle Maximum Hob Diameter: 90 mm (Often cited as 80 mm max in some configurations) Maximum Hob Length: 220 mm (Often cited as 200 mm max in some configurations) Maximum Hob Spindle Speed: 4500 min⁻¹ (rpm) or up to 6000 min⁻¹ Hob Spindle Drive Power (S6-60%): Up to 19 kW (or up to 23 kW depending on configuration) Hob Head Swivel Angle (B-Axis): ±45 degrees Axes Travel and Feed Rates Axial Travel (Z-Axis / Hob Slide): 250 mm or 400 mm (Depending on configuration) Radial Travel (X-Axis / Cutter Infeed): 10 mm (minimum distance) to 200 mm (maximum distance) Maximum Shift Travel (V-Axis / Tangential): 180 mm (Shift travel for hob) Maximum Rapid Traverse Rate (X/Z): 17 000 mm/min or up to 40 m/min Felsomat FZ 250 Loader / Automation Loader Type: Felsomat FZ 250 (Typically an integrated ring loader or swivel loader) Workpiece Change Time (Chip-to-Chip): Often less than 4 seconds (With high-speed automation) Loader Gripper Type: Typically double grippers for simultaneous unloading/loading Maximum Workpiece Weight (Loader): Up to 15 kg

Condition: used, TECHNICAL DETAILS - Number of axes : 5 LINEAR AXES - X stroke : 400 [mm] - Y stroke : 250 [mm] - Z stroke : 250 [mm] - Rapid traverse rate : 24 [m/min] - Resolution : 0.0001 [°] GRINDING WHEEL HOLDER HEADSTOCK VERTICAL - C axis : 225 [°] - angular resolution : 0.0002 [°] - Spindle speeds : 12.000 [rpm] - Tool type : HSK-50E - Spindle power : 15 [kW] PART-HOLDER HEADSTOCK - Rotational speed range (rotary axis) : [rpm] Rsdpfx Ahewwa Dkszsbt - Rotation speed range (universal rotary axis) : [rpm] - angular resolution : 0.0001 [°] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1980 x 1750 [mm] - Machine height : 1960 [mm] - Machine weight : 2800 [kg] EQUIPMENT - CNC : SIEMENS SINUMERIK 840D - Automatic loading and unloading system with 50 positions

Condition: used, TECHNICAL DETAILS - Number of axes : 5 LINEAR AXES - X stroke : 400 [mm] - Y stroke : 250 [mm] - Z stroke : 250 [mm] - Rapid traverse rate : 24 [m/min] - Resolution : 0.0001 [°] GRINDING WHEEL HOLDER HEADSTOCK VERTICAL - C axis : 225 [°] - angular resolution : 0.0002 [°] - Spindle speeds : 12.000 [rpm] - Tool type : HSK-50E - Spindle power : 15 [kW] PART-HOLDER HEADSTOCK - Rotational speed range (rotary axis) : [rpm] - Rotation speed range (universal rotary axis) : [rpm] - angular resolution : 0.0001 [°] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS Redpfowwa Ddsx Ahzobt - Machine floor space : 2.050 x 2.100 [mm] - Machine height : 1.960 [mm] - Machine weight : 2800 [kg] EQUIPMENT - CNC : SIEMENS SINUMERIK 840D - Lubricating tank with pump * with cooling unit for coolant - Oil mist extractor : ABSOLENT ODR 2000

Condition: ready for operation (used), MODUL Germany Gear Hobber ZFWZ 2000/3 Max gear diameter without tailstock: 2100 mm Max gear diameter with tailstock: 1450 mm Redpfox Ebwrsx Ahzjbt Max gear face width: 1060 mm Max module with hobbing head: 22 Max/Min centre distance: 1240/150 mm Min number of teeth: 10 Max pressure angle: 45° Table diameter / number of slots: 1800 mm/12 Table bore / length: 600/800 mm Max hob diameter / length: 300/330 mm Max workpiece weight: 15,000 kg Weight approx.: 38 t

Condition: used, Technical data: Max. length of sharpened knives: 600 mm Diameter of grinding wheel: 130 mm Manual feed Power supply: 380 V Total power: 0.55 kW Overall dimensions: Rjdpfex Eadwox Ahzsbt Length: 1670 mm Width: 950 mm Height: 1600 mm

Condition: used, WAHLI W 92 is a Hobbing machine offering precision, high accuracy and reliable operation. Work capacity: max diameter 10 mm, max module 0.5, workpiece length max 35 mm, max gear width 15 mm, number of teeth 6-180; distance between workpiece and tool 0-28 mm; gear hob max Ø 24 mm; milling cutter speeds 6 steps from 850 to 4500 t/min. Main specs: 50 Hz 3x 380 V supply, power 0.32 CV; machine weight approx. 350 kg; dimensions L630×W530×H1350 mm. Equipment: PLC control, Loader Wahli W20, parts catcher, deburring device, coolant system, central lubrication. Achieves tight tolerances; typical applications: automotive, watchmaking, machine tools, aerospace, medical. Rsdpfx Ahexx U Ahezebt

Condition: used, Bandsaw Blade Sharpening Machine Vollmer CAB 42 U - Bandsaws: - Blade width: 60 to 210 mm - Blade length: 6000 to 11000 mm - Tooth pitch: 6 to 60 mm - Tooth height: 4 to 25 mm - Rake angle: -5 to +35° - Working speed: 30 and 45 teeth/min - with central height adjustment Rsdpfx Aexxn Tajhzobt - Feed from right to left - with clamping device for bandsaw blades

Year of construction: 2019, condition: good (used), functionality: fully functional, Venom Standard V8 Central, manual clamping device for bandsaw blades Grinding wheel is directly driven, reducing vibrations and enabling very high material removal rates Large-diameter grinding wheel V8 = 300 mm for increased profile durability of the grinding wheel Electric feed adjustment for tooth face and tooth back via touch panel Integrated grinding wheel dressing device Rbodpfxsxqrtbe Ahzet Frequency inverter for stepless feed speed adjustment Available for gang or circular saw blades Frequency inverter for stepless grinding wheel speed adjustment Swivel arm Technical details: Tooth profiles: PCB Blade width Bandsaws: 32 mm to 380 mm Blade thickness: 0.4 – 6.0 mm Adjustable pitch: 14 – 60 mm Adjustable tooth height: 5 – 30 mm Rake angle: 0° – 40° Working speed: 0 – 30 teeth/min Grinding wheel diameter: V8 = 300 mm Grinding wheel thickness: 6 – 20 mm Grinding wheel drive: 3.2-4.0 kW electric motor Water pump: 120–350 l/min Grinding wheel is directly driven, reducing vibration and allowing for very substantial material removal Grinding wheel with large diameter (300 mm) for enhanced grinding wheel profile stability All mechanical guides are located at the rear of the machine to protect them from moisture Electric feed adjustment for tooth face and tooth back via touch panel Built-in grinding wheel dressing device

Condition: like new (used), functionality: fully functional, workpiece weight (max.): 3 kg, feed length X-axis: 100 mm, feed length Y-axis: 100 mm, feed length Z-axis: 200 mm, workpiece diameter (max.): 180 mm, milling length: 200 mm, overall weight: 5,000 kg, rotational speed (max.): 3,000 rpm, rotational speed (min.): 400 rpm, tool diameter: 80 mm, Equipment: documentation/manual, rotational speed infinitely variable, This machine is completely dismantled and rebuilt from the ground up. During the overhaul, it undergoes comprehensive modernization with state-of-the-art technology and the latest premium-quality components. Following refurbishment, the machine is presented in a technical and visual condition equivalent to new – reliable, high-performance, and future-proof. Rbedpfx Ahox Af A Hjzet The equipment and configuration can be tailored individually to your requirements, ensuring maximum productivity in your production environment.

Condition: good (used), Year of construction: 1975, max. wheel diameter 630 mm gear width 425 mm table hole 125 mm clamping table 550 mm max. module 10 axial-feeds 0,40 - 6,80 mm/U radial feeds 0,10 - 1,76 mm/U dist. cutter spindle - workpiece spindle 50 - 425 mm no. of teeth min. 8 milling cutter dia. x width 192 / 215 mm shifting 200 mm main drive motor 7,5 kW total power requirement 22,5 kVa weight of the machine ca. 8,2 t Machine equipment: - Universal milling head with tangential displacement - Pressure reducing valve for counterholder - Magnetic chip transport --> Working range Largest module to be milled (in steel 600 N/mm²): 10 mm Rbsdow A Am Sjpfx Ahzjt --> Straight gear teeth: --> Largest workpiece diameter: 630 mm --> Largest axial slide travel (Z-axis): 425 mm --> Smallest number of teeth to be milled: 8 --> Dimensions Diameter of workpiece table: 550 mm --> Diameter of table bore: 125 mm --> Diameter of workpiece mandrel: 36 mm --> Largest milling cutter that can be clamped: --> Diameter: 192 mm --> Width: 220 mm --> Diameter of milling cutter mandrels: 32 mm --> Centre distance between milling cutter and workpiece: --> Maximum distance: 425 mm --> Minimum distance: 50 mm --> Drive taper for cutter mandrels: Morse taper 5 --> Maximum cutter displacement: 200 mm --> Speeds and feeds Cutter speeds: 45 - 280 rpm --> Axial feed (Z axis): 0.40 - 6.30 mm/rev --> Radial feed (X axis): 0.10 - 1.60 mm/rev --> Tangential feed (Y axis): 0.14 - 2.24 mm/rev Translated with (free version)

Condition: ready for operation (used), Year of construction: 1963, functionality: fully functional, wheel diameter: 900 mm, workpiece diameter (max.): 150 mm, overall weight: 8,200 kg, rotational speed (max.): 80 rpm, workpiece length (max.): 750 mm, TECHNICAL DETAILS Max. wheel diameter: 900 mm Max. module: 10 Max. cutter diameter: 190 mm Max. cutter length: 320 mm Cutter speeds (stepless): 13–80 rpm Max. workpiece length: 750 mm Max. workpiece diameter: 150 mm Rsdpfsxvr Enjx Ahzobt MACHINE DETAILS Machine weight approx.: 8,200 kg Note: The arbor for the counter-support is missing.

Condition: excellent (used), HSS saw grinder LOROCH model Ekostar 760 year 2008 Rjdpfxew Hrvqj Ahzobt

Year of construction: 2002, condition: good (used), Vollmer CA 200 Rsdpfxjfbgvde Ahzebt

Condition: good (used), Alber sharpening machine for band saw blades saw blade width 50 - 206mm tooth pitch 20 - 50mm Redpfeglui Aox Ahzebt

Year of construction: 1982, condition: used, Circular saw blade sharpening machine Loroch JLM 36 Rbedpfecq Nghjx Ahzst