Used High Pressure Coolant Systems for sale (52,134)

Condition: excellent (used), functionality: fully functional, load capacity: 750 kg, Equipment: foot remote control, APS welding rotary table DSE 750 kg Speed continuously variable from 0 - 1.7 rpm. Ljdpjv A Rppsfx Affohr Length 1250mm, width 1550mm, height 940mm Height from floor to center of hole min. 500mm, max. 780mm Diameter of clamping disc 600mm Hollow shaft or hole 110mm

Condition: excellent (used), 3D systems Here we offer you a 3D printer. Solid-state Nd: YVO4with triple frequency Wavelength: 354.7nm Nominal power at the laser head: 1450 mW (1000mW at the resin surface under standard conditions) Zaphyr TM coating system: Process: Replaceable coating agent Adjustment: Self-leveling and self-correcting Production layer: Minimum 0.05mm Maximum 0.15mm Lhsdpfx Afonkalgjfor ProScan™ scanner Edge detection (diameter at 1/e2): Nominal in standard mode 0.13mm Detection of large lines Nominal: 0.76mm Maximum drawing speed Edge detection: 3.5m/sec. Detection of large lines: 25m/sec. Build volume capacity: RDM 750F: 650mm x 750mm x 550mm; 414l Maximum part weight: 75kg Power supply: 200-240VAC (alternating current), 50/60Hz single-phase, 30A Ambient conditions Temperature range: 20-26°C Max. permissible fluctuation: 1°C per hour Relative humidity: 20-50%, non-condensing Space requirement: Size (WxDxH), unpacked: 1260mm x 2200mm x 2280mm Weight packed (no RDM): 1590kg Type: iPro 8000 Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, This listing is for a Enviro Systems UVIC-750 Lhjdpfx Aoxzhu Aeffer

Condition: used, Year of construction: 2001, functionality: unexamined, machine/vehicle number: RV014301, Year: 2001 Maximum sheet size: 1050 x 750 mm Minimum sheet size: 420 x 297 mm Maximum printing size: 1050 x 730 mm Sheet thickness: 0.075 - 0.8 mm Maximum feeder height: 675 mm Maximum feeder capacity: 600 kg Feeder speed: 400 - 3,000 sheets/hour Screen frame outer dimensions: 1300 x 1170 mm UV dryer Equipped with: - Stream Feeder - Pull Side Lays - Suction Feed Belt Lodpoxy E Dxsfx Affjhr - Deep Pile Delivery - Natgraph 2-lamp UV dryer with hot air module - Trumax Hyperstack Technical specifications: Maximum mechanical speed: 1,000 - 3,000 sheets/hour Maximum sheet size: 1,020 x 720 mm Minimum sheet size: 560 x 370 mm Printing speed (IPH): 900 ～ 3,300 Print thickness: 0.1 ～ 0.8 mm

Condition: used, Year of construction: 2003, operating hours: 200 h, functionality: fully functional, fuel type: diesel, color: blue, power: 80 kW (108.77 HP), output voltage: 400 V, output frequency: 50 Hz, nominal power: 80 kW (108.77 HP), nominal power (apparent): 100 kVA, continuous power (apparent): 100 kVA, Used Diesel Generator – Volvo Penta TAD 520 GE | 100 kVA / 80 kW | Enclosed Technical Specifications: Brand: SES (Scandinavian Engineering Systems A/S) Engine Model: Volvo Penta TAD 520 GE Power Output: 100 kVA / 80 kW Voltage: 400/231 V Frequency: 50 Hz RPM: 1500 Year of Manufacture: 2003 Enclosure: Yes (Soundproof cabinet included – see photos) Cooling: Water-cooled Control Panel: Integrated Condition: Used, in good working order Additional Information: Engine rated at 102 kW PRP (Prime Rated Power): 94.0 kW Alternator type: UC 274 D Fully enclosed cabinet – suitable for outdoor installation Regularly maintained Lhjdpfx Aowzimceffjr Ready for inspection and immediate dispatch Photos available upon request.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: DR047-13 / 10015861, Complete resin dryer system for injection moulding production. The system has been used sparingly and is in good condition. The system consists of multiple components that can also be sold separately, as follows: 1 resin dryer Moretto VTH 31 V, SN 1906041 / 2019 2 resin dryers Plastic Systems, SN DR047-13 / 10015861 / 2013, capacity 370 kg each Dwjbk Rkjwx E Nbjm Eceb 23 resin silos with the following capacities: - 54 kg * 4 pcs - 105 kg * 6 pcs - 113 kg * 2 pcs - 75 kg * 2 pcs - 56 kg * 4 pcs - 22 kg * 2 pcs - 140 kg * 1 pc - 210 kg * 1 pc - 420 kg * 1 pc Distribution pipelines. Stainless steel pipes and fittings available. Lhedpfx Ajwx E Nbeffsr Do not hesitate to contact us for a personalised price quote.

Condition: used, Item: A-2600-UF-Microfiltration-Block UF- /Microfiltration Block (Alcalase) Lodpfxekyu Avj Affohr 4 X 38-42 m2 DOW Separation Systems inclusive pumps, tubes and other accessories. To offer 6 pieces identical

Condition: excellent (used), Here we offer you a 3D-SYSTEMS 3D printer. The ZPrinter ProJet 660 Pro 3D printer has a large installation space. Thus, even large models can be manufactured without prior cutting. Furthermore, the large footprint increases productivity when printing many small models in one print run. Ledpohb Dtpofx Affshr 3D color printer with enormous productivity and color fidelity. The ProJet ColorJet color 3D printers from "3D Systems", also known as ZPrinter, work layer-forming according to the ColorJet CJP "Binder Jetting" process, directly in a powder bed. This eliminates the need for dedicated support structures, even for complex and detailed prints with these 3D printers. The unconsolidated powder supports the parts during printing and is then recycled semi-automatically. Areas of application Communication of form and design, installation analysis, initial functional testing, variant testing, form finding, design, development, marketing, sales, master models for thermoforming, dental models, presentation... Best ColorJet 3D color printer in its class for applications with the highest demands, it sets new standards in the field of full color 3D printing systems. Technical data: ZPrinter ProJet 660 Pro 3D Printer Size: 254 x 381 x 203 mm Color: 390,000 colors (5 print heads, including black) Resolution: 600 x 540 dpi Minimum detail size: 0.1 mm Automation: Complete (automated set-up and self-monitoring, automated print

Condition: used, This listing is for a Ortho Diagnostic Systems Cellwasher 2 Lhsdjxzhc Hopfx Affer

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 30091329802, Year of construction: 2016, operating hours: 1,209 h, total length: 1,120 mm, total height: 1,070 mm, total width: 740 mm, overall weight: 211 kg, input voltage: 220 V, input current: 10 A, working width: 295 mm, working height: 142 mm, working length: 211 mm, This machine has been lightly used in our showroom and for creating customer samples. The ProJet MJP 2500 Plus produces precision rigid and elastomeric parts with true-to-CAD accuracy, a superior surface finish, and high-quality edge fidelity, making it ideal for true functional testing. Key Capabilities * High-Resolution Printing: Capable of printing in Ultra High Definition (UHD) mode, allowing for features as fine as 300 microns. * Precision and Quality: Delivers true-to-CAD accuracy with a superior surface finish and high-quality edge fidelity. Material Compatibility This printer is compatible with a wide and versatile selection of VisiJet materials, including: * Engineering and rigid plastics. * A broad range of rigid materials in clear and opaque colors. * Materials with properties that mimic engineering plastics. * Elastomers and high-temperature resistant materials. Common Applications Lhsdpfoxg Rhcox Affjr * Concept modeling, form and fit testing. * Functional prototyping and fluid flow analysis. * Rapid tooling, jigs, and fixtures. * Medical applications requiring USP Class VI and/or ISO 10993 certification for biocompatibility.

Year of construction: 2023, operating hours: 180 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 11124, Welding fume extraction unit from "reder systems". Dimensions (L-W-H): 1700x900x2300 mm, air flow rate: 4000-6000 m³/h. Includes piping and 8 extraction arms for equipping 8 welding stations. The system is dismantled and ready for transport. Lodpfx Aexl Dpqeffjhr

Year of construction: 1988, condition: good (used), Bucket sealer Make: Soft Electronic Systems Type: Semi-automatic bucket sealer Model: PMS 2 GH Capacity: Up to 300 buckets per hour Frame: Stainless steel Range: Buckets up to D = 300mm Dimensions: L x B x H = 1.000 x 900 x 1.000 mm Weight: 150 Kg Power supply: 380 Volt – 50 Hz – 1,5 kW Comp. Air: > 5.5 Bar Features: manually positioning of bucket automatic seal process (adjustable time) automatic sliding towards cutting device Ledpfxsigyp Ho Affehr automatic pushing and rotating knife manually reeling up the film manually removing of bucket

Condition: ready for operation (used), Specifications: Model: 1120SPL Manufacturer: Hosokawa Polymer Systems (USA) Cutting chamber: 11" x 20" (279mm x 508mm) Motor: 20 HP / 15 kW, 400V, 3 Phase Rotor diameter: 12.5" (318mm) Rotor knives: 3 Bed knife: 1 Screen area: 373 in² (2406 cm²) Typical throughput: up to 650 lbs/hr (≈295 kg/hr) depending on material and screen size Approx. weight: 1,600 lbs (726 kg) Dimensions: L 69” x W 36” x H 57” (1753 x 914 x 1448mm) Features: Heavy-duty welded steel construction Lhjdpfxexvc D Uo Affer Easy access for cleaning and maintenance Safety interlocks and belt-driven motor Ideal for press-side, post-production, or recycling use Clean and well-maintained unit – ready to run

Condition: used, Year of construction: 1993, Technical details: height of printing: - height of printing: - connection electric: 100-240 V pneumatically operated: min./max.: 4,8/6,9 bar The printer is a lower case inkjet printer for contactless mark products. Application: for commercial marking and labeling purposes. The device can print on any surface, any structure, any profile and on any form. (according to the manufacturer) Equipped with two control units. Lsdpfx Aou Nu Tpsffshr other features: - dimension height: 3.3 - 8.6mm and 1/8 "- 1/3"; Points of reference: 62 digits; - operation is via control unit - equipment with control unit 170i and accessories Control unit 178i dimensions: - machine: L: 600 x W: 650 x H: 1800mm - control units: L: 203 x W: 508 x H: 610mm Sale as is. Without test run! i.D. *

Condition: used, This listing is for the Partical Measuring Systems LASAIR lll 310c particle measuring systems The unit is in full working condition and is ready for immediate release Lhjdpexv A T Njfx Affer The Lasair® III 310C is a state-of-the-art portable aerosol particle counter designed to meet the stringent requirements of highly regulated environments. Manufactured by Particle Measuring Systems (PMS), it sets the standard for portable particle counters, ensuring that your environment remains clean and compliant.​ Key Features Particle Size Range: 0.3 to 25.0 µm Flow Rate: 1.0 CFM (28.3 LPM) ±5% Counting Efficiency: Complies with ISO 21501-4 requirements Display: 8.4" color VGA IR touch screen (IP65 rated) Data Storage: Up to 3,000 complete data sets Connectivity: Ethernet, Modbus TCP/IP, RS-232, USB data downloading; optional wireless Ethernet Environmental Inputs: Four 4-20 mA inputs for external sensors Power Options: Operates on AC power or hot-swappable batteries Compliance: Meets ISO 14644-1, EU GMP Annex 1, and ISO 21501-4 standards Software Compatibility: Supports FacilityNet, PharmaceuticalNet, and FacilityPro for data analysis and reporting Reporting Capabilities: Cleanroom certification results are available through a local printout, downloadable via USB in a secure format, or through the use of external software packages Wireless Communication: Wireless network communications are facilitated with an externally mounted wireless adapter, simplifying communications with network systems ​ Specifications Dimensions: 30.1 x 32.7 x 25.9 cm Weight: 6 kg (without battery), 7.5 kg (with two optional batteries) Operating Environment: Temperature: 0 – 30°C; Humidity: 5 – 95% RH non-condensing Sample Tubing: Supports 3/8", 1/2", and 3/4" tubing up to 8 meters in length Sample Output Filtering: Internally filtered to >99.97% at 0.3 µm

Condition: good (used), functionality: fully functional, roll width: 410 mm, power: 0.12 kW (0.16 HP), roll spacing: 60 mm, axle spacing: 110 mm, drive type: Motorisiert, Roller conveyor curve/ curve 90 degrees Manufacturer: Soco System Condition: Used Model: Rollers Type: 90°degree Total width outside: approx. 1430 mm Total width inside: approx. 820 mm Total width incl. motor: approx. 580 mm Conveyor width: approx. 410 mm Roller spacing: approx. 60 mm Center distance: approx. 110 mm Roller type: Plastic Material: Steel/plastic Color: Galvanized, light grey, orange Including 2 motors Soco 0.12 KW In stock: 4 pieces Price per piece Lhodettcp Sepfx Affer The conveyor technology has run until dismantling. Condition: fully functional, with signs of use Ideal for fast material transport Pick-up address: Industriestraße 5 (47918 Tönisvorst) Expertly dismantled and packaged Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under heavy loads. Customized solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods! We will be happy to provide you with an individual quotation or advise you on the design or installation issues. Simply let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of specialists. For companies in a wide range of sectors, such as logistics, the pharmaceutical industry, trade or Logistics, pharmaceutical industry, trade or the electronics industry, we have already successfully realized projects. Together we will work out ways to optimize your process and material flow in a cost-effective and sustainable manner. We can even offer you fully automated sorting technology or supplementary components such as order picking racks or containers.

Condition: excellent (used), Year of construction: 2012, operating hours: 2 h, functionality: fully functional, overall weight: 25 kg, type of input current: DC, input voltage: 220 V, power: 220 kW (299.12 HP), volume flow: 4.6 m³/h, control voltage: 24 V, year of last overhaul: 2025, Volumetric feeder type DM30-38 with horizontal feed line Equipped with D.50 mm screw at 50 mm pitch Supplied without hopper Lodpfx Aerl Rv Tjffehr 1/38 brushless geared motor - 220 W - 3000 rpm Power supply 220 V mono 50 Hz Weight : 25 kg

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: SO-22949/1/19, REF: MM6218 1 X Sparc Systems 8-lane linear weighing combination system. Technical specification⚙️ Lhsdpfx Aoxd Thmjffer ✅ Model - LCWS. ✅ Serial - SO-22949/1/19. ✅ Overall dimensions - 1620mm long x 920mm wide x 1620mm high. Note 🗒️ Seller has a quote for service and getting production-ready at cost of £12-15k per unit.

Condition: excellent (used), This machine was filling capsules and tablets into small tubs. The whole line is also available. Bottles are loaded into the line from lazy susan, product is counted and doses into the tub or bottle which is then foil sealed before the screw lid is applied. All machines were bought new in 2015 and appear to be in excellent condition. The counter is a Vitacount 12-1 Lhjdpfoxm S Hmsx Affjr

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, overall weight: 140 kg, LPG Systems LPG Cellu M 6 Endermolab 1I or optionally 2I Beauty device Body and facial unit (new) Endermolift (Ergolift) Latest global patent for facial treatments Tested by a certified trainer in beauty and therapy Completely refurbished and overhauled Fresh maintenance recently carried out New hose Refurbished KM80 roller head from 2013 New KM70 roller head or therapy head TR50 New KM50 roller head New controller from previous owner Device has been freshly overhauled New valves, new seals, new hose New capacitors, new filter, etc. Original price: 39,980 EUR net Suitable for Endermologie body and Endermologie face treatments Optional upgrade to Ergo Lift patent 2014 for an additional 2,000 EUR Lipo massage and Endermolift technology available Like new and immediately available in Germany Optional delivery and commissioning according to LPG manual guidelines Optional starter package (Bodywear, filters, clamps, flyers) A premium device in the upper class of the medical beauty segment! Not junk like ultrasound or radiofrequency from China – Lhodpfx Aecgy Hdsffsr Ergodrive, Ergolift 12-month warranty from date of purchase valid only with a 2-day training course and completion of the final exam Start your Endermologie season now. 100% natural mechanostimulation provides a painless yet intensive treatment. Addictive results—clients come to strengthen and firm connective tissue, reduce cellulite, and men to tighten abdominal areas. My clients typically lose up to 2 dress sizes, and the treatment has been scientifically proven to boost metabolism. Drooping eyelids and double chins can be positively influenced with the Endermolift. This patented system delivers the precision of Swiss watchmaking. For the past 14 years, I have treated and traded with older LPG devices, but the results from the latest generation convinced me to support the new Integral, Endermolab sibling models, and the Alliance. We continue to support you with application questions after purchase. Facts about LPG: 39 years of experience Global market leader in the medical beauty segment European company 175 documented clinical and scientific studies 80,000 devices produced Present in 100 countries 12 million treatments performed 200,000 treatments per day Leasing available from our partner bank E.g., 399 EUR/month Images are for reference; always new devices available You matter to us after your purchase! References available nationwide Clients: Doctors, therapists, cosmeticians, etc.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 213-051, cutting width (max.): 400 mm, wheel diameter: 860 mm, TECHNICAL DETAILS Saw blade type: Horizontal Saw wheel diameter: 860 mm Maximum cutting width: 400 mm MACHINE DETAILS Model: Hhepunkt HP-400 Lhjdjxmgq Tepfx Affer Year of manufacture: 2018 Serial number: 213-051 Motor power: 22 kW (30 HP) EQUIPMENT Conveyor belt (in poor condition)

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 20212531, The HiTec Steam Cooker, are versatile, custom-built cookers are designed to Steamcook & pasteurize, a wide range of production needs such as gyoza, dumplins etc. Engineered with food safety,EHEDGE, efficiency, and footprint in mind. Year of construction 2021 and not used much since that! Lodpfx Afsxl Tnpjfehr

Condition: ready for operation (used), Stainless steel Mixer Tumbler 300 litre mixer tumbler Size 730 mm diameter x 700 mm deep Lhsdpexpfzisfx Affsr Scrape mix arm Variable speed mix arm Capacity 300 Litres Tipping discharge by motor drive Hinged lid

Condition: excellent (used), Year of construction: 2014, Infrared dryer for textiles Lsdpfx Afsxnzt Ssfshr the oven is 2.12 m wide the conveyor belt is 1.73 m wide, 4.45 m long, 1.75 m high plus 1 m extractor

Condition: excellent (used), operating hours: 2,658 h, functionality: fully functional, pressing force: 71 t, filling opening width: 1,000 mm, filling opening length: 1,620 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 600 kg, input current: 200 A, oil tank capacity: 1,250 l, empty load weight: 29,000 kg, Technical data baler: Manufacturer BOA Recycling Systems B.V. Type M75-45-A-5-1.6 Ecoline Year of construction 2021 Hours of operation 2,658 hours (as of May 2024) Number of pressed bales 42,212 pieces (as of May 2024) Press power main press 71,2 kN (71 t) Specific press capacity 9 kg/cm² Operating pressure 280 bar Cylinder stroke 2,200 mm Feed channel 1,620 x 1,000 mm Capacity per cycle time 2,4 m³ Theoretic cycle time 21 seconds Theoretic throughput rate 450 m³/hour Bale size 1,100 x 720 mm, length variably adjustable up to 1,400 mm Driving motor 45 kW Connected load 100 kW Current consumption 200 A Tying system 5-fold vertical, fully automatic, the press stamp is prepared for an additional 3-fold horizontal binding Throughput rate at a bulk weight of 30 kg/cbm approx. 13,6 tons/hour bulk weight of 50 kg/cbm approx. 24,2 tons/hour bulk weight of 100 kg/cbm approx. 36,4 tons/hour bulk weight of 150 kg/cbm approx. 54,7 tons/hour Bale weight up to 600 kg, depends on material Volume hydraulic oil tank 1,250 l SPS controller Siemens S7 1500 Operating panel Siemens SIMATIC HMI TOUCH Transport dimensions of press 10,000 x 2,800 x 3,385 mm (l x w x h) Press height set up with feed chute 4,743 mm Press height with conveyor belt 7,123 mm Ljdpfx Afju Thcvjfohr Machine weight baler approx. 29 tons Noise level <85 dB (A) Condition of the baler: With 2,658 operating hours, the press is almost as good as new and in very good condition, has hardly any signs of wear and is ready for immediate use. Due to larger material input quantities, the pressing force and throughput of the machine no longer meet the customer's current requirements and is therefore being replaced by a new 120 tonne baler. Only the baler is for sale, without conveyor belt and wire drawing stations. Comments: The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.