Used High Pressure Coolant Systems for sale (51,963)

Condition: new, Year of construction: 2024, functionality: fully functional, HIGH-PRESSURE PUMP HT SERVO-JET4000 A well thought-out principle with great effect. HIGH-PRESSURE PUMP HT SERVO-JET4000 A well thought-out principle with great effect. Bwjdpfx Aeu Hz Tqocysw + Up to 40 % energy savings compared to conventional systems, Investment eligible for subsidies + High energy efficiency: servo direct drive, no reactive current, low and and flexible power consumption + Low connected load required: no power consumption when the WSS system is at a standstill of the WSS system, suitable for companies with low energy supply + 3-piston plunger pump: high liter capacity and high efficiency of up to 98 %, replaces 6000 bar technology, long maintenance intervals, simple design, no hydraulic system, no warm-up and start-up phase - ready to start immediately + Permanent pressure control and integrated pulsation damping: Continuous readjustment of the cutting pressure to the set value - no pressure fluctuations, higher cutting speed than with a pressure intensifier in a comparable combination + Lowest noise level of 75 dB: high-quality complete unit with soundproof housing + Can be used universally for all waterjet machines and brands

Condition: used, Item: A-2600-UF-Microfiltration-Block UF- /Microfiltration Block (Alcalase) 4 X 38-42 m2 DOW Separation Systems inclusive pumps, tubes and other accessories. Bodokyu Avspfx Acyoww To offer 6 pieces identical

Condition: excellent (used), Year of construction: 2010, 1,0 St. Trockenlufttrockener mit Material- förderer, als Singlelösung, auf Rollen, Inhalt Trichter 75 Liter Hersteller: PLASTIC SYSTEMS Typ: DW60 MT DISP Baujahr: 2010 Inhalt Trichter: 75Liter Trockenlufttemperatur: max. 200° C Bwedsxk Uy Rjpfx Acyjw Ausstattung: 2,0 ST. Materialförderer Hersteller: PLASTIC SYSTEMS

Condition: excellent (used), Year of construction: 2012, operating hours: 2 h, functionality: fully functional, overall weight: 25 kg, type of input current: DC, input voltage: 220 V, power: 220 kW (299.12 HP), volume flow: 4.6 m³/h, control voltage: 24 V, year of last overhaul: 2025, Volumetric feeder type DM30-38 with horizontal feed line Equipped with D.50 mm screw at 50 mm pitch Supplied without hopper Bsdpfxsrl Rv To Acysww 1/38 brushless geared motor - 220 W - 3000 rpm Power supply 220 V mono 50 Hz Weight : 25 kg

Condition: excellent (used), REF: MM6209 1 x Ling Systems stainless steel heat shrink tunnel. Technical specification ⚙️ ✅ Manufacturer - Ling Systems Bwedpfx Ajxdi R Rscyjw ✅ Belt width - 395mm (370mm useable). ✅ Electrical requirements - 3 phase. ✅ Overall dimensions - 2550mm long x 1160mm wide x 2250mm high.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, overall weight: 140 kg, LPG Systems LPG Cellu M 6 Endermolab 1I or optionally 2I Beauty device Body and facial unit (new) Endermolift (Ergolift) Latest global patent for facial treatments Tested by a certified trainer in beauty and therapy Completely refurbished and overhauled Fresh maintenance recently carried out New hose Refurbished KM80 roller head from 2013 New KM70 roller head or therapy head TR50 New KM50 roller head New controller from previous owner Device has been freshly overhauled New valves, new seals, new hose New capacitors, new filter, etc. Original price: 39,980 EUR net Suitable for Endermologie body and Endermologie face treatments Optional upgrade to Ergo Lift patent 2014 for an additional 2,000 EUR Lipo massage and Endermolift technology available Like new and immediately available in Germany Optional delivery and commissioning according to LPG manual guidelines Optional starter package (Bodywear, filters, clamps, flyers) Bedpfecgy Hdex Acyjww A premium device in the upper class of the medical beauty segment! Not junk like ultrasound or radiofrequency from China – Ergodrive, Ergolift 12-month warranty from date of purchase valid only with a 2-day training course and completion of the final exam Start your Endermologie season now. 100% natural mechanostimulation provides a painless yet intensive treatment. Addictive results—clients come to strengthen and firm connective tissue, reduce cellulite, and men to tighten abdominal areas. My clients typically lose up to 2 dress sizes, and the treatment has been scientifically proven to boost metabolism. Drooping eyelids and double chins can be positively influenced with the Endermolift. This patented system delivers the precision of Swiss watchmaking. For the past 14 years, I have treated and traded with older LPG devices, but the results from the latest generation convinced me to support the new Integral, Endermolab sibling models, and the Alliance. We continue to support you with application questions after purchase. Facts about LPG: 39 years of experience Global market leader in the medical beauty segment European company 175 documented clinical and scientific studies 80,000 devices produced Present in 100 countries 12 million treatments performed 200,000 treatments per day Leasing available from our partner bank E.g., 399 EUR/month Images are for reference; always new devices available You matter to us after your purchase! References available nationwide Clients: Doctors, therapists, cosmeticians, etc.

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 10111408, Jenoptik Opticline C314 – Optical Shaft Measuring Device Year of manufacture: 2008 Model: C314 Serial number: 10111408 Condition: Fully functional Category: Optical Shaft Measuring Device Availability: Immediately Location: Germany Calibration: 07/2025 according to DIN EN ISO 10360 and VDI/VDE 2617, certificate available Measuring range diameter: 140 mm Measuring range length: 600 mm Workpiece weight: 200 / 300 / 600 N Resolution diameter and length: 0.1 µm Resolution rotation: 0.0006° Diameter accuracy: 1.0 + D[mm]/200 µm Length accuracy: 2.6 + L[mm]/200 µm Repeatability diameter: 0.3 µm Repeatability length: 1.2 µm Software user interface: Turbo Optic 3 Software measuring module: BWMS4 Power supply: 230 V Measuring system dimensions: 700 x 840 x 1355 mm Dimensions with probe: 810 x 840 x 1355 mm Machine weight: approx. 155 kg Accessories weight: approx. 300 kg Accessories: Mobile table frame Bwsdpfjxqh Etjx Acyjw Manuals: available Technical documentation: available Loading options: Forklift compatible Maintenance status: Maintenance records for 2024 & 2025 available, inspection values without any findings, overall condition: very good Optical shaft measurement systems with multi-sensor technology and highest precision This measuring device is used for quality inspection of the following products: - Turned and precision-turned parts - Components for the automotive industry, e.g. electric motors, drivetrains, steering components, and turbochargers - Blanks and pressed components for the metalworking industry - High-precision parts for medical technology, e.g. implants, bone screws and surgical instruments - Components for injection and nozzle technology - Components for the bearing industry - Parts for turbines and emergency power generators - Parts for the textile and printing machinery industry - Applications in the aerospace sector - Pneumatic and hydraulic components, e.g. pumps - Various electric motors, e.g. for fans, household appliances, positioning and drive systems

Condition: used, Year of construction: 1993, Technical details: height of printing: - height of printing: - connection electric: 100-240 V pneumatically operated: min./max.: 4,8/6,9 bar The printer is a lower case inkjet printer for contactless mark products. Application: for commercial marking and labeling purposes. Bsdju Nu Tpjpfx Acyjww The device can print on any surface, any structure, any profile and on any form. (according to the manufacturer) Equipped with two control units. other features: - dimension height: 3.3 - 8.6mm and 1/8 "- 1/3"; Points of reference: 62 digits; - operation is via control unit - equipment with control unit 170i and accessories Control unit 178i dimensions: - machine: L: 600 x W: 650 x H: 1800mm - control units: L: 203 x W: 508 x H: 610mm Sale as is. Without test run! i.D. *

Condition: excellent (used), Year of construction: 2014, 1,0 St. Trockenlufttrockener mit Material- förderer, als Singlelösung, auf Rollen Bwsdsxk Ux Tepfx Acyow Hersteller: MORETTO Typ: XD 23A Baujahr: 2020 Inhalt Trichter: 380 Liter Trockenlufttemperatur: max. 200° C

Condition: new, Year of construction: 2019, functionality: fully functional, overall weight: 19 kg, type of input current: DC, input voltage: 220 V, power: 0.12 kW (0.16 HP), tank capacity: 15 l, control voltage: 24 V, year of last overhaul: 2025, Volumetric feeder type DM10-38 with inclined feed line 15-liter capacity stainless steel hopper 1/38 brushless geared motor - 118 W - 3000 rpm Bodjrlm Ihepfx Acysww Power supply 230 V mono - 50 Hz Weight : 19 kg Type 1KC2020 screw and bush assembly for DM10 filler Screw D.20 mm at 20 mm pitch Sleeve D.28 mm Connection Ø 50mm Cast aluminium base type BMS80 for DM10-20 Material inlet: 92 x 92 mm and outlet D.80 mm Height: 234 mm

Condition: excellent (used), machine/vehicle number: SO-22950/1/19, REF: MM6219 1 X Sparc Systems 8-lane linear weighing combination system. Bwedpfx Asxd S Eqjcyow Technical specification ⚙️ ✅ Model - LCWS. ✅ Serial - SO-22950/1/19. ✅ Overall dimensions - 1620mm long x 920mm wide x 1620mm high. NOTE 🗒️ Quote for service and getting production-ready at cost of £12-15k per unit.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 40,365 h, General Data Machine weight 22000 kg Injection Unit Screw diameter 100 mm Clamping Unit Clamping force 2500 kN Opening stroke 650 mm Max open daylight 1500 mm Distance between bars 630 x 630 mm Ejector stroke 200 mm Ejector force for / back 60 kN Bsdpfxexpyuws Acyeww Additional Equipment Injection unit: 13000 kg Clamping unit: 9000 kg only hot runner is includeed This Otto Systems eKW 250/5500 PET was manufactured in 2018. It features a clamping force of 2500 kN, a screw diameter of 100 mm, and a maximum injection speed of 250 mm/s. The machine has a dry cycle time of 1.6 seconds and a total weight of 22000 kg. If you are looking to get high-quality injection molding capabilities, consider the Otto Systems eKW 250/5500 PET machine we have for sale. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Quin Systhems PTSM322 Mini Machine Manager , serial no. according to photo ,used, good condition, 100% functional, scope of delivery according to photos Bjdji Ecl Dopfx Acyeww

Condition: used, Year of construction: 2018, functionality: fully functional, Fully operational washing system, original price €93,000.00! Configured as follows: QUANTUS C165, DFH 2,250, DFB 2,400, TH 1,700 QU01010 Base price €58,027.50 Grey water recycling equipment QU00370 1 unit €1,620.00 Articulated arm system, DFH 2,250 QU01210 1 unit €6,075.00 SENSOFIL +, DFH 2,250mm QU01410 1 unit €6,397.50 Splash guard for roof brush QU00142 1 unit €450.00 Wheel washing unit with brush, linear technology QU00151 1 unit €3,915.00 Side high pressure, 2 RDÜ, 1 overflow, 20 l/min, 85 bar QU00152 1 unit €2,797.50 Side high pressure, 8 ODÜ, 1 overflow, 40 l/min, 50 bar QU00169 1 unit €4,935.00 Bodpfx Acoxpnvveysww Item No. Qty Unit Price Total Price EUR Active foam system QU01500 1 unit €2,107.50 Special waxing system (water application) QU01530 1 unit €2,685.00 Emergency stop device, front left QU00320 1 unit €352.50 Emergency stop device, front right QU00330 1 unit €352.50 Emergency stop device, rear left QU00340 1 unit €352.50 Emergency stop device, rear right QU00350 1 unit €352.50 Positioning device, LED, fixed, left (Forward, Stop, Reverse / Arrow, Stop, Arrow) QU00388 1 unit €727.50 Positioning device, LED, fixed, right (Forward, Stop, Reverse / Arrow, Stop, Arrow) QU00389 1 unit €727.50 Fresh water network separation, pipe separator EZ00000 1 unit €645.00 Energy supply chain (boom/console galvanized) EZ00020 1 unit €502.50 Control terminal, VARIO-L, wall-mounted EZ02500 1 unit included Wheel guide rails EZ00700 1 unit €757.50 Sign DIN A3 "Our Washing Offer", 5 programs EZ02005 1 unit included Sign DIN A3 "Important Washing Information" EZ02000 1 unit included Sign DIN A3 "Important Safety Information" EZ02010 1 unit included Sign DIN A3 "How It’s Done", Single / Double PWA, Spring, Summer, Autumn EZ02020 1 unit included Sign DIN A3 "How It’s Done", Single / Double PWA, Winter EZ02030 1 unit included Sign DIN A3 "General Terms and Conditions" EZ02045 1 unit included Documentation, PWA, Standard, DE, single copy DOC0000 1 unit included VDA Certificate of Conformity, PWA, DE, single copy (new system) DOC0200 1 unit included Starter set of chemicals, PWA CH00000 1 set included Total order value: €93,780.00

Condition: excellent (used), This machine was filling capsules and tablets into small tubs. The whole line is also available. Bedexm S Hmopfx Acyoww Bottles are loaded into the line from lazy susan, product is counted and doses into the tub or bottle which is then foil sealed before the screw lid is applied. All machines were bought new in 2015 and appear to be in excellent condition. The counter is a Vitacount 12-1

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 213-051, cutting width (max.): 400 mm, wheel diameter: 860 mm, TECHNICAL DETAILS Saw blade type: Horizontal Bwodpfxjxmgq To Acyew Saw wheel diameter: 860 mm Maximum cutting width: 400 mm MACHINE DETAILS Model: Hhepunkt HP-400 Year of manufacture: 2018 Serial number: 213-051 Motor power: 22 kW (30 HP) EQUIPMENT Conveyor belt (in poor condition)

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: SO-22949/1/19, REF: MM6218 1 X Sparc Systems 8-lane linear weighing combination system. Bwjdpfx Acsxd Thmsyjw Technical specification⚙️ ✅ Model - LCWS. ✅ Serial - SO-22949/1/19. ✅ Overall dimensions - 1620mm long x 920mm wide x 1620mm high. Note 🗒️ Seller has a quote for service and getting production-ready at cost of £12-15k per unit.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 20212531, The HiTec Steam Cooker, are versatile, custom-built cookers are designed to Steamcook & pasteurize, a wide range of production needs such as gyoza, dumplins etc. Engineered with food safety,EHEDGE, efficiency, and footprint in mind. Year of construction 2021 and not used much since that! Bodpexl Tnpjfx Acyjww

Condition: new, Balance Systems 9NDRAEA0046000 SN:B512867 ,unused in opened original box, 100% functional, scope of delivery according to photos Bwodpji D T A Rjfx Acyjw

Condition: ready for operation (used), Stainless steel Mixer Tumbler 300 litre mixer tumbler Size 730 mm diameter x 700 mm deep Scrape mix arm Bedpfx Acexpfzisyoww Variable speed mix arm Capacity 300 Litres Tipping discharge by motor drive Hinged lid

Condition: ready for operation (used), Year of construction: 2013, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: DR047-13 / 10015861, Complete resin dryer system for injection moulding production. The system has been used sparingly and is in good condition. The system consists of multiple components that can also be sold separately, as follows: 1 resin dryer Moretto VTH 31 V, SN 1906041 / 2019 2 resin dryers Plastic Systems, SN DR047-13 / 10015861 / 2013, capacity 370 kg each Dwjbk Rkjwx E Nbjm Eceb 23 resin silos with the following capacities: - 54 kg * 4 pcs - 105 kg * 6 pcs - 113 kg * 2 pcs - 75 kg * 2 pcs - 56 kg * 4 pcs - 22 kg * 2 pcs - 140 kg * 1 pc - 210 kg * 1 pc - 420 kg * 1 pc Bjdpfx Acowx E Nboyeww Distribution pipelines. Stainless steel pipes and fittings available. Do not hesitate to contact us for a personalised price quote.

Condition: excellent (used), Year of construction: 2014, Infrared dryer for textiles Bsdpexnzt Sefx Acyeww the oven is 2.12 m wide the conveyor belt is 1.73 m wide, 4.45 m long, 1.75 m high plus 1 m extractor

Condition: excellent (used), functionality: fully functional, load capacity: 750 kg, Equipment: foot remote control, APS welding rotary table DSE 750 kg Speed continuously variable from 0 - 1.7 rpm. Length 1250mm, width 1550mm, height 940mm Bwjdjv A Rppjpfx Acyew Height from floor to center of hole min. 500mm, max. 780mm Diameter of clamping disc 600mm Hollow shaft or hole 110mm

Year of construction: 2010, condition: new, functionality: fully functional, Technical specifications: • Manufacturer: JMC Recycling Systems Ltd. (England) • Model: Dolphin 5005-Lite • Year of manufacture: 2010 • Connection: 380–415 V, 3-phase • Recommended hydraulic oil: ISO 46 • Robust construction, mobile on wheels • Includes control unit and hydraulic drive Condition: Bedpexm Uf Ssfx Acyjww • NEW, unused • Only storage marks present (see pictures) • No operating hours

Condition: new, Balance Systems 9SGJ025A050200 Digitally operated balancing head, SN:B512879, unused in opened original packaging, 100% functional, scope of delivery as per photos Bsdpfx Acji D T Dneysww