Used High Pressure Compressor for sale (32,597)

Condition: used, Year of construction: 2012, operating hours: 1,861 h, functionality: fully functional, total length: 4,100 mm, total height: 1,950 mm, total width: 1,930 mm, pressure: 600 bar, empty load weight: 1,320 kg, fuel: diesel, overall weight: 1,800 kg, power: 36.5 kW (49.63 HP), temperature: 55 °C, SDAH industrial machine, high-pressure pump: + Woma + Ecotherm 600 + First registered: 21.11.2012 + 1,861 operating hours + 4-cylinder Kubota diesel engine, 2400ccm; 48 hp + WOMA high-pressure pump, 600 bar + 2 burners (1 burner disconnected) + 55°C heating temperature + Ball head coupling + Single-axle chassis + Tool box at the front + Storage compartment at the rear + 200l water tank + Foot switch + 2 x cable reel + connection cable Hsdpfx Agozpycbstofl + HD hose + Woma gun + 410cm x 193cm x 195cm (l x w x h) + Unladen weight: 1,320 kg; permissible GVW: 1,800 kg + High-pressure cleaner, from first owner Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, COMPLETE PACKAGE: Mobile, transportable compressed air supply station – the entire system is installed in a red steel container (10 ft) and can be transported as a single unit using a crane. Simply connect the three-phase power supply and compressed air line – and it’s ready to go. The interior features a HIGH-QUALITY INDUSTRIAL SYSTEM manufactured in 2025: - SCC screw compressor with frequency inverter (speed-controlled, energy-efficient) - 2000-liter pressure vessel VIG (stands upright, protrudes through the container roof with a weather protection cover) - Complete control system with touch panel and emergency stop button on the outside - Acoustic sound insulation (black foam mats inside) - Permanently installed electric heater in the container (frost protection for year-round operation) - Hose material and compressed air connections for consumers - Crane lifting points on the container roof - Control panel with touch display, emergency stop, status LEDs Originally from the shipyard operations of Strela Shiprepair GmbH. System freshly painted, clean, and ready for use. Assumption of the maintenance contract with Schulze is possible. TECHNICAL DATA: SCREW COMPRESSOR: - Manufacturer: SCC Air Compressors - Control: SCC frequency inverter (speed-controlled) - Type: Screw compressor, stationary in the container - Year of manufacture: 2025, commissioning date: 23.05.2025 - Operating time: approx. 1 year in shipyard operations PRESSURE VESSEL: - Manufacturer: VIG GmbH, Kreuztal - Volume: 2,000 liters - Max. pressure: 11 bar - Test pressure: 15.73 bar - Temperature: -10°C to +50°C - Standard: AD 2000, test mark 1003 - Factory No.: 124585, year of manufacture 2025 Hedpfx Agozav Ddetofl CONTAINER: - 10-foot steel container, soundproofed, painted red - External dimensions: approx. 2,991 x 2,438 x 2,591 mm - Crane lifting points on the roof (photo attached showing the shipyard crane) - Three-phase power connection 400 V CEE IDEAL FOR: - Shipyards and shipbuilding companies (mobile compressed air supply for ships) - Sandblasting service providers (mobile complete solution) - Industrial companies with changing locations - Automotive/body shops with an external location - Construction companies, scaffolding companies PICKUP: Loading with the shipyard crane directly on-site (container has lifting points on the roof). Transport by low-bed trailer via a forwarding agency. Inspection appointments are available at any time – we will then show you the complete documentation and demonstrate the system in operation.

Condition: new, Year of construction: 2016, functionality: fully functional, pressure: 440 bar, operating pressure: 440 bar, rotational speed (max.): 1,500 rpm, empty load weight: 1,700 kg, power: 66 kW (89.73 HP), year of last overhaul: 2026, pump capacity: 81 l/min, Equipment: type plate available, High-pressure plunger pump, Hammelmann HDP 72. Similar to, but not a Kamat, Uraca, or Woma. Hedpfxezgw Hxj Agtsfl Pump type: HDP 72 Operating pressure: 440 bar Flow rate: 81 l/min Drive speed: 1500 rpm Drive power: 66 kW Max. inlet temperature: 60°C Year of manufacture: 2016 Condition: Manufactured in 2016, but unused.

Condition: good (used), High-pressure standpipe -Pressure: maximum 30 bar -Predos is a special high-pressure stainless steel standpipe with a burst pressure of 70 bar. -Pressures of up to 30 bar may be required when clearing blocked drains. -High-pressure gauge Hfedpob A Shpjfx Agtjl -with lid lifter type: Hercules -in the suitcase -Dimensions: 1200/360/H200 mm -Weight: 16 kg

Year of construction: 2010, condition: as good as new (ex-display), Woma 1002 P35 High Pressure Pump in New Condition 300 bar - 84 ltr/min - 1500 rpm 300 bar - 101 ltr/min - 1800 rpm Hfsdpfsf Dybzox Agtjl

Condition: used, Year of construction: 2018, machine/vehicle number: D18451643, used vacuum pump Busch MM 1104 BP O2 for sale, YOM: 2018 Manufacturer: Busch, Vacuum Pumps and Systems Model: Mink MM 1104 BP O2 S/N: D18451643 MFG: 2018 Nominal pumping speed: 62 m³/h Ultimate pressure: 60 hPa (mbar) Nominal motor speed: 1800 min-1 Noise level (ISO 2151): 71 dB(A) Weight approx.: 155 kg Dimensions (L x W x H): 1080 x 430 x 590 mm Gas inlet / outlet: G 1 ¼" / G 1" (NPT) Max pressure: 1,2 - 2.0 bar (17-29 psi) Motor: 2.2 – 3.2 kW (3.0 HP), 3-phase, 230/460 V, 60 Hz Lubrification: dry/oil-free Cooling: air-cooled Hodpfxezz Tm Rs Agtofl Description: The Busch Mink MM 1104 BP O2 is a specialized, industrial-grade dry claw compressor and vacuum pump. The "BP" designation stands for overpressure/pressure variants, while the "O2" specification denotes it is configured specifically for handling oxygen-enriched gases. 1. The Rotary Claw Pumping Principle The core of the pump consists of two claw-shaped rotors mounted on parallel shafts inside a synchronized pumping chamber. Synchronized Counter-Rotation: The rotors turn in opposite directions. Their movement is precisely synchronized by a timing gear drive located in a separate, sealed gear housing. Contactless Operation: As the claws rotate, they pass incredibly close to each other and the interior cylinder wall, maintaining tight tolerances measured in fractions of a millimetre. However, they never actually touch. Internal Compression: As the claws roll past the inlet port, gas is drawn into the expanding chamber. As rotation continues, the volume between the claws is trapped, compressed mechanically by the geometric shape of the rotors, and then forced out through the discharge port. Because there is zero friction or mechanical wear inside the pumping chamber, the pump requires no internal lubrication. This yields an entirely oil-free exhaust gas stream. 2. Engineering Architecture: The "BP" Designation The BP (Back Pressure / Overpressure) variant modifies the internal geometry and sealing profile of the standard Mink platform. Dual-Function Flexibility: While traditional vacuum pumps exhaust directly to atmospheric pressure, BP variants are built with heavy-duty casings and specialized shaft seals. This allows them to operate as both low-pressure compressors and high-differential vacuum pumps. Variable Pressure Handling: They can safely discharge gas into a pressurized manifold system (up to standard rated overpressures, usually around 2.0 to 2.5 bar absolute) without suffering from seal failure or overheating. 3. Materials & Thermodynamics of the "O2" Variant Pumping high-purity or enriched oxygen (O₂ > 21%) presents severe thermal and chemical hazards. Standard industrial pumps will trigger a catastrophic flash fire if compressed oxygen reacts with hydrocarbon lubricants or friction points. The O2 variant incorporates specific thermodynamic and chemical isolation measures: Gearbox Lubricant: PFPE (Perfluoropolyether) synthetic fluid. It is chemically inert and completely non-reactive with pure oxygen. Price Euro 3.590 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: ready for operation (used), machine/vehicle number: 838 621, minimum pressure: 180 mbar at intake capacity: 2.2 m³/min outlet nozzle diameter: 50 mm Hjdpfx Aodzw I Nsgtefl speed: 2780 rpm drive motor: 220/380 V, 0.95 kW space requirement: 510 x 350 x 480 mm

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK 2000-Litre Pressure Tank – English Translation The CORMAK pressure tank with a capacity of 2,000 litres and a working pressure of 11 bar is a reliable solution designed for storing compressed air in industrial plants, workshops, and pneumatic systems. Its robust steel construction, compliance with European Union directives, and UDT certification make this tank an essential component of any compressed air system. Thanks to its optimized design and high pressure resistance, the tank can serve both as a storage buffer and as an element for stabilizing the compressor's operating parameters. Key Advantages of the 2,000 L Pressure Tank Professional pressure-vessel construction – made of high-grade 5 mm thick steel, resistant to pressure and corrosion. UDT certification and CE marking – compliance with European safety and quality standards. 11 bar working pressure – suitable for most pneumatic systems, including those with higher operating requirements. High capacity – 2,000 litres – provides a stable supply of compressed air and reduces the frequency of compressor start-up cycles. Multi-connection system – equipped with 5 connections in 2" and 1/2" sizes, allowing flexible connection to various installations. High-quality workmanship – durable external paint coating. Space-saving vertical design – the vertical construction helps save valuable space in industrial facilities. Construction and Technology – Robust Design for Demanding Applications This compressed air tank has been designed for intensive use in industrial environments. The body is made of structural steel with a 5 mm wall thickness, ensuring resistance to pressures of up to 11 bar and providing long-term durability. All welds undergo rigorous quality control, while the tank surface is protected with a coating resistant to chemical and atmospheric factors. The tank is equipped with a nameplate bearing the CE marking and the identification number of the UDT notified body, confirming its approval for use on the Polish and European markets. The set includes complete technical documentation, a pressure-vessel passport, and material certificates. Precision and Operating Efficiency – Stable Pressure and Optimized Compressor Operation Thanks to its large 2,000-litre capacity, the tank acts as an air buffer, stabilizing pressure throughout the pneumatic system. This ensures consistent operation of compressed-air-powered equipment and significantly extends the compressor's service life by reducing the number of start-up and shutdown cycles. The vertical design allows for compact installation, which is particularly important in facilities where space is limited. Standard Equipment Connection ports: 5 pcs. – sizes 2" and 1/2" Nameplate with CE marking UDT notified body identification number Hedpfx Aozznuvjgtjfl Complete technical documentation and pressure-vessel passport External anti-corrosion coating Technical Specifications Parameter Specification Weight (kg) 360 Number of connections 5 Connection size 2", 1/2" Dimensions 289 × 101 cm Tank capacity (L) 2,000 Working pressure (bar) 11 Wall thickness (mm) 5 Diameter (mm) Ø 1,010 Height (mm) 2,890

Condition: used, Centrifugal pump, high pressure pump, water pump, multi-stage vertical centrifugal pump, booster pump, booster pump -Manufacturer: KSB, high pressure pump Movichrom - G 9/2 PN16 G2 -Drive: 1.1 kW -Speed: 2825 rpm -Max. Delivery rate: 9 m³/h -Max. Delivery head: 22 m -Price: per piece -Number: 1 pieces -Dimensions: 250/210/H555 mm Hfjdped Sntbofx Agtjl -Weight: 37 kg/piece

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. Hfedpfxefzraps Agtsl High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: new, Year of construction: 2025, functionality: fully functional, fuel type: electric, drive type: Elektro, Pressure Washer Condition: New Hfodoxmb Sfopfx Agtsl Technical Condition: New Description: New

Condition: good (used), Centrifugal pump, high-pressure pump, water pump, multi-stage vertical centrifugal pump Hfsdpecxq Atefx Agtol -Drive: 0.75 kW 2810 rpm -Max. flow rate: 9.0 m³/h -Max. pressure: 18 mWS -Quantity: 1 available -Dimensions: 380/225/H565 mm -Weight: 36 kg

Condition: not inspected (used), I sell the Airless high pressure set of painting devices without guns. 2 stk. high pressure pump Kovofiniš vyza 4V ratio 33:1, output pressure 9-25 MPa Hfsdpfed Nnb Rex Agtol 1ks. high pressure pump Wagner 600 Airless 2ks. high pressure tank Kovofiniš TZ60M und TZ100M 1ks. Tank Kovofiniš. On stock. Sellable immediately. Total price 1000 Euro.

Condition: as good as new (ex-display), Year of construction: 2026, High-pressure cleaner PTC Easypower L B, similar to but not a Dynajet, Oertzen, Falch, Woma, Kamat, or Denjet. - Operating pressure: 200-700 bar - Flow rate: 13-42 l/min - Engine: Kohler Stage V Diesel, 35 HP / 26 kW, 3400 rpm - Dimensions: 1,370 x 850 x 1,020 mm - Dry weight: approx. 260 kg - High-pressure pump: HPP three-plunger pump with ceramic plungers - High-quality frame made of painted steel with corrosion protection - Covers made of stainless steel - Holder for gun with lance - Trolley with 4 industrial wheels, 350 mm - Electric starter - Operating hour counter - Incl. 20 m high-pressure hose with stainless steel quick-release couplings, spray gun, lance, and flat spray nozzle 15° The following models are available: Easy Power L D 16/500 | 16 l/min. 500 bar Easy Power L D 23/350 | 23 l/min. 350 bar Easy Power L D 20/400 | 20 l/min. 400 bar Easy Power L D 30/280 | 30 l/min. 280 bar Easy Power L D 42/200 | 42 l/min. 200 bar Hfodpfx Aefdzy Usgtol Easy Power L D 13/700 | 13 l/min. 700 bar

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, - High-pressure cleaner PTC TORPEDO MINI-E 3.8 M 230/50 Powersteam and TORPEDO MINI-E 5.8 T 400/50 Powersteam – similar, but not a Dynajet, Oertzen, Falch, etc. - Cold water / hot water / steam 32 bar up to 140°C / high-pressure steam 150 or 200 bar up to 150°C for cleaning and disinfecting. The following models are available: - TORPEDO MINI-E 3.8 M 230 Volt/50 Hz Powersteam, 8 l/min at 150 bar Hfsdpfx Agjfh Skaetsl - TORPEDO MINI-E 5.8 T 400 Volt/50 Hz Powersteam, 8 l/min at 200 bar - Dimensions and empty weight: 110x64x98 cm, approx. 150 kg - Includes 10 m high-pressure hose, spray gun, lance, and flat spray nozzle 25°.

Condition: excellent (used), Year of construction: 2009, operating hours: 4,824 h, functionality: fully functional, power: 5.52 kW (7.51 HP), 1 x Atlas Copco Airpower B.V. rotary screw compressor and refrigerant air dryer mounted on 200L receiver tank. Manufacturer - Atlas Copco Airpower B.V. Model - GX5 FF. Serial number - CAI361147. Hodpfx Agszu Aw Sjtjfl Date of manufacture - 2009. Working pressure - 10 bar. Working hours - 4824 hours. Electrical requirements: Compressor - 400 V / 50 hz / 3 phase. Air dryer - 230 V / 50 hz / 1 phase.

Condition: as good as new (ex-display), Year of construction: 2026, The CE08 series is an electrically powered high-pressure cleaner. This model is the ideal tool for general cleaning tasks. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotary nozzles, chemical injectors, and a sandblasting kit. It is similar to, but not a Dynajet, Falch, Kärcher, Oertzen, etc. Hfjdpohf Nakofx Agtel Available models: ----- CE08-series L/min CE08-200 bar 15 7.5 hp water blaster unit 50Hz CE08-200 bar 15 7.5 hp water blaster unit 60Hz CE08-200 bar 15 7.5 hp water blaster unit 50Hz with start/stop CE08-200 bar 15 7.5 hp water blaster unit 60Hz with start/stop General specifications: ----- Drive motor power: 6.0 kW Volt: 400V (50Hz) - 440V (60Hz) Amp: 12.8A (50Hz) - 12.3A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Includes standard accessories.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 3 h, functionality: fully functional, operating pressure: 500 bar, total length: 1,100 mm, high-pressure hose length: 10,000 mm, total height: 1,130 mm, total width: 700 mm, pressure: 500 bar, type of input current: three-phase, empty load weight: 400 kg, input voltage: 400 V, fuel: electricity, overall weight: 400 kg, warranty duration: 12 months, power: 30 kW (40.79 HP), input current: 63 A, water pressure: 500 bar, Equipment: chassis, The CLENA H5031 series offers maximum robustness and durability and is designed for the most demanding industrial environments and construction sites. With a flushing capacity of 30 liters per minute at a water pressure of 500 bar, these machines deliver impressive results, for example, when shot-blasting concrete or cleaning tanks. Includes accessories: Hjdpfszd Tx Sjx Agtefl - 10 m high-pressure hose DN10, with kink protection on both ends - HP500 Soft CL high-pressure gun with a swivel joint at the inlet - CL lance with nozzle protection, including a high-pressure nozzle

Condition: used, Centrifugal pump, high pressure pump, water pump, multistage vertical centrifugal pump, booster pump, booster pump -Manufacturer: KSB, Movichrom high pressure pump - G 3/5 PN25 G2 -Drive: 0.75 kW Hfsdpjf S Nchsfx Agtsl -Speed: 2810 rpm -max. delivery rate: 3 m³/h -max. head: 33 m -Dimensions: 220/250/H580 mm -Weight: 34 kg

Year of construction: 2020, condition: ready for operation (used), functionality: fully functional, For sale: AERZEN D62H rotary lobe compressor, manufactured in 2020. Technical data Manufacturer: AERZEN / Aerzener Maschinenfabrik GmbH Type: D62H Machine: Rotary Lobe Compressor / Drehkolbenverdichter Year of manufacture: 2020 Nominal motor power: 160 kW Max. suction pressure (abs.): 1.013 bar Max. discharge pressure (abs.): 2.513 bar Max. differential pressure: approx. 1.5 bar / 1500 mbar Unit weight: 2,790 kg Serial number: 4084095 Customer order no.: 223922 Industrial AERZEN compressor suitable for applications requiring high air volume at low pressure. The machine is equipped with the original manufacturer's nameplate. More information, additional photos and price available on request. Worldwide delivery can be arranged. Please contact us for further information. Hfsdpfx Agszucpnjtol

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Equipment: documentation/manual, refrigerant dryer, type plate available, We offer for sale a screw compressor with an integrated condensation dryer, type Aircraft / Fini A-K-Max 7.5-10-270 K (IE3), manufactured in 2021 by Aircraft. It is manufactured and marked according to CE standards (European conformity). The compressor has been used sparingly and regularly serviced, with documented operating history, including Czech operating and maintenance manuals. Technical parameters: Capacity: 1050 l/min, Maximum pressure: 10 bar, Tank size: 270 l, Dimensions: L: 1200, W: 680, H: 1540 mm, Weight: 280 kg, Electric motor power: 7.5 kW, Voltage: 400 V, Sound pressure level Lp 62 dB. The compressor is in very good technical condition and is ready for immediate use. It can be viewed at our warehouse in Přerov. Hfsdpfx Agszy Spzstsl

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, operating pressure: 500 bar, total length: 2,050 mm, high-pressure hose length: 10,000 mm, total height: 1,450 mm, total width: 990 mm, pressure: 500 bar, type of input current: AC, empty load weight: 850 kg, fuel: diesel, heating capacity: 157 kW (213.46 HP), overall weight: 850 kg, warranty duration: 12 months, fuel tank capacity: 20 l, power: 18.39 kW (25.00 HP), pressure (max.): 500 bar, water pressure: 500 bar, The HST-XL HotWater was developed as a special-purpose unit specifically for demanding industrial applications and is characterized by its particularly robust and functional design. The simple, yet high-quality technology ensures high reliability and, at the same time, facilitates easy and maintenance-friendly servicing. The equipment includes two stainless steel hose reels with 30 m of high-pressure hose and 25 m of low-pressure hose. In addition, the unit features detachable tanks for BW-20-L canisters and defined lifting points for forklifts and cranes. Includes accessories: - 10 m high-pressure hose DN10, with kink protection on both sides - HP500 Soft CL high-pressure gun with rotating joint at the inlet - CL spray lance with nozzle protection, including high-pressure nozzle Available models: HSTXL4025HW | 400 bar | 25 l/min Hfedpszd T Rbsfx Agtsl HSTXL5020HW | 500 bar | 20 l/min

Condition: used, Year of construction: 2022, operating hours: 15,000 h, functionality: fully functional, overall weight: 2,020 kg, power: 90 kW (122.37 HP), volume flow: 960 m³/h, operating pressure: 8 bar, pressure (max.): 8 bar, Equipment: documentation/manual, type plate available, We offer this used Hertz FRECON 90 P screw compressor, manufactured in 2022. Hodjz Abb Ejpfx Agtofl Pressure: 8 bar Capacity: 16 m³/min Rated power: 90 kW Weight: 2020 kg Voltage: 400 V Frequency: 50 Hz Maximum shaft speed: 2340 min⁻¹ Date of manufacture: 04/2022 If you have any questions or require further information, please do not hesitate to send us a message or contact us by phone.

Condition: reconditioned (used), Year of construction: 2017, operating hours: 1,651 h, functionality: fully functional, machine/vehicle number: G393, operating pressure: 500 bar, total length: 1,175 mm, total height: 945 mm, total width: 760 mm, pressure: 500 bar, type of input current: three-phase, empty load weight: 290 kg, input voltage: 400 V, power: 15 kW (20.39 HP), input current: 32 A, noise level: 78 dB, pressure (max.): 500 bar, input frequency: 50 Hz, water pressure: 500 bar, Dear Sir or Madam, Hjdpfx Aexugifogtofl For sale is an overhauled Falch WheelJet 15 Electric without accessories. 500 bar 15 l/min 32A plug Best regards, STS-Reinigungstechnik Team

Condition: used, volume flow: 820 m³/h, pressure (max.): 10 bar, High-quality oil-lubricated screw compressor. It features a direct drive, which is the most efficient type of drive. Manufacturer: AIRPOL Model: NB 90 Capacity: 820 m3/h Maximum pressure: 1.0 MPa Motor power: 90 kW / 160 A (SCHORCH) Screw element: GHH RAND, TYPE: CF128G (INGERSOLL) Hfodpjzt Ahbefx Agtjl Operating hours under load: 27,062 h Weight: 1850 kg Year of manufacture: 2007 Complete DTR documentation and UDT inspection logbook with tank passport. Includes new air and oil filters. Technical condition: used machine.