Industrial filters, oil mist cleaning

Air-Fresh-Service F-V15D Luftfilter

Condition: excellent (used), Year of construction: 2005, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 35,000 m/min, rapid traverse Y-axis: 35,000 m/min, rapid traverse Z-axis: 35,000 m/min, workpiece weight (max.): 200 kg, total length: 500 mm, total width: 400 mm, table load: 200 kg, rotary table diameter: 280 mm, Coolant system Filtration tank HR 410 Handwheel iTNC530 controller Lredex R S Smspfx Ad Nsg 1e owner machine X - Travel: 600mm Y - Travel: 450mm Z - Travel: 400mm A - Axis: 110° B - Axis: 360° Table Length: 500mm Table Width: 400mm Table load: 200 Table Ø: 280mm Feed rate X-Axis: 35000mm/min. Feed rate Y-Axis: 35000mm/min. Feed rate Z-Axis: 35000mm/min. Feed rate A-Axis: 10Degrees/min Feed rate B-Axis: 15Degrees/min Spindle Taper: 40ISO/Bt/Mk Power on spindle: 15kW Speeds / ranges: 18000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 3500mm Width: 3500mm Height: 2800mm Weight: 6600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2014, power capacity 3 kW feed pressure 7 bar liter capacity / l weight 286 kg Chicago Pneumatic CPVR15 CE screw compressor - Year of manufacture 2014 The CPVR15 CE impresses with its robust design, long service life and low operating costs. Whether in workshops, workshops or industrial applications - this compressor reliably supplies you with the compressed air you need. Drive power: 3 kW Delivery pressure: 7 bar Air output: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50-58 dB(A) Voltage/frequency: 415 V / 50 Hz Application: Workshops, craft businesses, industrial applications with medium compressed air requirements Included in delivery: 1x compressor - Chicago Pneumatic CPVR15 CE Ledpfx Ash A Sfdsd Norg 1x refrigeration dryer - OMI ESD 108 - 0.70kW 1x Beko Öwamat 2 - oil-water separator Technical data was taken from publicly available sources

Condition: new, Extraction capacity of filter unit at spigot*: 350 m³/h Total power consumption*: 0.09 kW Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Noise level*: 52 db(A) Dimensions L/W/H in mm: L 329 / W 374 /H 510 Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on the filter equipment Special voltage or special colour on request Application: Ledpfx Adoh Rdwxe Njrg Extraction of oil mist and smoke, for small to very large machine workrooms. Your advantages of the ELBARON series: - 18 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Speed and air flow rate adjustable - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large range of mounting and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke. For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already digitalised as standard and can be controlled, for example, using a laptop. The ELBARON® unit series comprises 18 unit variants and can be optimally designed for your application in terms of size and performance. ELBARON® units impress with their long service life and absolute functional reliability. Our electrostatic filter cells are dimensioned in such a way that the best possible filter efficiencies, service lives and trouble-free operation are achieved under economic aspects.

Condition: new, Year of construction: 2023, Orbital sanders are made for sanding straight, curved and shaped pieces with a round or oval section etc. and with a variable thickness for chair, table, bed and associated items. The machines main features are: Frame in electro-welded steel - Rotating disk with 2 opposing abrasive belts driven by an electric moto, with a revolving movement around the workpiece - Electrical control panel - 2 Adjustable workbenchees (inlet - outlet) - Possibility of fitting 2 automatic workpiece-feeding units with adjustable speed by means of inverter. Abrasive belts: 80 x 1260 mm Lrjdpfx Adoqnufvs Nsg Min-max. workpiece diam.: 10-100 mm (fi) Min. curvature radius: 200 mm Dimensions: 760x1000x1800 mm 3 pieces. Camam, Comec, OMEF, Brusa di Garboli

Condition: new, Year of construction: 2025, functionality: fully functional, Blasting container for blasting with glass beads, ceramics, corundum, hard cast gravel, garnet sand, etc. Blasting container with full-surface screw conveyor floor and real blasting agent preparation. No sweeping, vacuuming and shoveling of abrasive in the blast room during the blasting of your workpieces thanks to our circulation system. Blast media cleaner air separator 4-fold adjustable air volume/ flow speed/ suction proximity to the blast media/ blast media layer height adjustment. Electric vibrating screen for permanent coarse separation. Bucket elevator with trapezoidal threaded spindle for belt tensioning and speed monitoring. Container lining with a 70shore 4mm fabric rubber for a service life of up to 30 years with proper use. Container can be opened completely to the side for easy forklift loading. Container can be upgraded with a crane overhead hatch, floor reinforcement, lateral blast room extension. When blasting stainless steel, the container can be upgraded with a real magnetic drawer or a magnetic drum separator as well as stainless steel grating. Filter system with easy maintenance doors, big bag dust bagging, H13/14 secondary filter and silencer. Blast pot with pressure regulator and water separator. The container is characterized by its reliability and easy maintenance. All system components are easily accessible at the rear of the container. Only 4 ball bearings on the screw conveyor floor and 4 ball bearings on the bucket elevator. Special warranty of 5 years on the essential parts of the blasting system included. Lodpfx Asuwlzysd Nsrg Safety equipment: Door/gate limit switch, dead man's control, emergency lighting, blast room viewing window, emergency stop in the blast room and on the outside of the control cabinet, pressure vessel quick ventilation

Condition: refurbished (used), Year of construction: 2013, Electrostatic air filter Indusa elstar EL4001 NVAS R/O Ljdpfx Asfyiqbjd Norg There are 3 units still available. Air intake is on the lower right, air outlet is on the upper left. The air filters are from 2010–2013 and have seen very little use, as operations switched to a central extraction system in 2014. All filters have been fully overhauled, cleaned, disinfected, and fitted with new internals. The units are in excellent optical and technical condition. Each unit undergoes a 24-hour test run prior to delivery. The elstar series’ thoughtful design, high-quality workmanship, and flexible modular system form the basis of its success among electrostatic air filters. The electrostatic air filter purifies contaminated machine exhaust precisely where it is generated—making the air breathable again! The elstar electrofilter is designed for the separation of oil mist, coolant mist, oil smoke, welding fume, vapors, airborne particulates, oxidized smoke, and aerosols, making it suitable for almost any industrial application.

Condition: used, Miter cold circular saw KALTENBACH type KKS 400 NA Machine. No. 101701 Year of construction 1983 saw blade diameter 400 mm cutting range at 90° round Ø 130 mm sawing range at 90° square 120 x 120 mm sawing range at 90° rectangle 305 x 20 mm Cutting range at 45° round Ø 130 mm Sawing area at 45° square 110 x 110 mm Cutting range at 45° rectangle 245 x 30 mm Clamping range of collet feed 30 to 140 mm Working height 1000 mm miter cut 0 - 180 feed path 600 mm Ledpfx Asd N H A Nod Norg Saw blade speed 10 + 20 m/min. 2 steps motor power 1,7 and 2,6 kW hydraulic motor 1,5 kW Mains connection 380 Volt, 50 Hz - Hydraulic material clamp feed with infeed roller conveyor left 1500 mm - Feed path via double feed up to 1200 mm (2x feed, then sawing) - Hydraulic material clamping with vertical clamping cylinder - miter cut - saw angle with manual adjustment - hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for the saw blade speed - saw blade stroke steplessly adjustable - coolant unit with electric pump in the machine base - Hydraulic unit fixed to the basic machine - Parts counter with zero cut-off space requirement of the saw 2600 x 1200 x 1900 mm weight of the saw approx. 1400 kg good condition

Year of construction: 2019, condition: new, Powder coating machine Mini - for beginners The Spark / ROMER® powder coating plant Mini - consists of: Powder oven SLS-9 small (inside: 1200x1400x1200mm - without transport system) Powder booth KPZ-2 Delivery time: approx. 12 to 16 weeks after ordering Shipping costs will be calculated individually. ( also self collection ) In order to offer you a detailed quotation for a system tailored to your application, further details regarding the application and the batch would be necessary. Ljdpfsctx Irox Ad Nerg We will then immediately prepare an offer for a suitable plant in the dimensions according to your request. Payment terms: 30% deposit and the 70% balance upon notification of readiness for shipment.

Condition: excellent (used), Year of construction: 2017, High-Performance 5-Axis Machining Center POSMILL H800 U Year of manufacture: 2017 Operated in single-shift mode Large spindle cooler Full Heidenhain measuring systems installed on all axes Heidenhain 530 control unit Kessler spindle, 18,000 rpm Kessler rotary swiveling arm, swing diameter 800 mm, fully usable with zero-point clamping system New maintenance scheduled for April 2025, rotary union replaced (€8,600) ————— Technical Data: X-axis: 670 mm Y-axis: 830 mm Z-axis: 600 mm (A-/C-axis) Swivel range approx. -100 to +120° and -120 to +120°, C-axis endlessly rotating 360° Ljdpfx Aoxtniked Nsrg Table diameter: 800 mm Tool holder: HSK 63 Tool positions: 96

Year of construction: 2021, condition: excellent (used), Complete set incl. hand and double foot remote control Digital display for speed Lredsm Ew Stepfx Ad Neg Hydraulic height adjustment dimensions: height tilted min: 800mm height tilted max: 1900mm height horizontal min: 1050mm height horizontal max: 2000mm diameter of the clamping disc 1500mm length 2900mm, width 1400mm weight 3200 Kg speed from 0,01 to approx. 0,7 rpm.