Used Heavy Machinery for sale (78,489)

Year of construction: 1998, condition: excellent (used), Technical detils : - Capacity - 500 nails/ min. - Power - 7 kw - Wire range - 1,0 - 4,2 mm Hnodpfx Aoh Hp H Soh Nsg - Nails lenght - 30 - 150 mm - Year - 1998

Condition: new, bore capacity in steel (diameter) 28 mm throat 250 mm bore stroke 130 mm morse taper 3 MK table: 380 x 380 mm turning speeds 75 - 3200 U/min thread M16 ST60 Hsdpfx Ahoprfbue Neng column diameter 98 mm engine output 1,1 kW dimensions 800 x 500 x 2000 mm weight 210 kg - automatic drill feeds (magnetic clutch) - Height adjustable and angle adjustable table - Movable work table - Integrated cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting.

Condition: good (used), Year of construction: 2014, Food Machinery Co E4230 VFFS bagger Hnsdpfx Ahjwtqrwj Neg 2014, Stainless VFFS, jaw width 250mm, adjustable seal temperatures and variable cool time, currently set with 95mm diameter forming set, with Eidos Swing thermal printer, 1Ph

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, Sanken Lasin laminointi kone Eva kalvolle , Prosessi esim Pujolin kalvolle Hedpfx Ajv Idb Njh Njng Mitat 4100 x 2200 x 2250 paino 3350 , 4 petiä , petien koko 3200 x 1700

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: GM-1400H, total width: 3,000 mm, total length: 5,000 mm, total height: 3,250 mm, type of input current: three-phase, energy consumption: 60 kWh, input current: 80 A, workpiece weight (max.): 2,720 kg, power: 48 kW (65.26 HP), workpiece height (max.): 950 mm, warranty duration: 1 months, working range: 319 mm, number of chambers: 3, Equipment: adjustable chassis, Conveyors are produced in such a way that they will not scratch the glass and leave no stains. The machine is made of steel and aluminum materials. Thanks to specially designed water sprays and brushes, the glasses comes out completely free from oils, stains and dust and cleaned. Angles of water nozzles will be adjustable. Conveyor rollers are produced of Ø 55 mm vulcanized rubber . Induction hardened gears are used in transmission gears. There will be 3 Washing Cabins, pre-washing, washing and rinsing washing system. In the pre-washing section, the upper and lower surfaces of the glass are washed with high-pressure spray nozzles. In the same cabin ,will be compressed air to the upper surface of the glass with air knife and the water will be completely cleansed. Thanks to this process, the glasses will go into the wash without entering the brush washing compartment, free from their dirt. There are 6 Brushes (Ø 120 mm.) in the Washing Machine and they will be able to wash laminated glasses. 2 of the brushes will be in the inlet (pre-wash) and 4 in the outlet (rinse-wash). there are brushes in total, 2 piece of them at the entrance and 4 pieces at the exit. 2 of the brushes will be suitable for laminated glass washing. the other 4 brushes will be for normal standard use. Features of brushes to wash laminated glass is ; Bristle material will be 6.6 P.A. The bristle diameter will be 0.15mm. The bristle length will be between 30-35 mm. Brush shaft will be produced of ASI 304L quality stainless material. During washing, the brush suitable for the laminated coated glass, whose properties are given above, will come into contact with the surface of the glass. To the other part of the glass will come into contact standard glass washing brush. The washing and air drying section will have an elevator system with a 350 mm opening and closing structure for maintenance and cleaning. Thanks to the elevator, the glass thickness (3-19 mm) can be adjusted easily. The speed of the conveyors will be adjustable between 0 m/min and 5 m/min. Hnjdpfx Ahsr Ak Exe Neg There will be a sound insulation cabinet in the drying fan. 1 piece of G4 filter and 1 piece of F7 filter will be at the air inlet of the drying fan . The filters will be of standard size and can be changed and will be 592*592*20 mm square type. 23. Thanks to the powerful air knives, the glasses will come to the exit conveyor dry. The height of the air knives will be adjustable. All pipes and hoses in the machine will be in a matte color to prevent algae formation in daylight. 26. Digital displays and many electronic equipment will be Delta or Schneider brand. There will be a stop sensor at the exit of the conveyor to prevent the glass coming from the machine from falling to the ground. There will be lighting system in the washing exit area for quality control from the bottoms and top of the conveyor towards the glasses. These lightnings will have the ability to be switched on and off separately. There are 3 separate water tanks in the machine. There will be an overflow water line that will prevent the water in the water tanks from overflowing.

Condition: excellent (used), Year of construction: 2019, Wanrooe Grinding Line Year 2019 Consisting of a single shaft crusher, a conveyor elevator of approximately 4 meters with suction installation Hsdpfewqtuiex Ah Njng

Condition: like new (used), functionality: fully functional, Year of construction: 2025, Introducing the Automatic 40 Ton Servo Punch Press Machine. Built for precision and flexibility, it boasts six tool stations, dual-servo control for dynamic X Y punching, and a powerful 22 kW hydraulic punch drive. With speeds up to 90 cycles per minute and an auto scrap conveyor, this servo punch press delivers seamless performance—quietly, efficiently, and intelligently. Watch how it adapts, executes, and excels. Hjdpfjw I N H Uox Ah Nsng Notable Features: • Robust Punching Power With 40 metric tons of punching force, this machine delivers consistent performance and handles a wide range of sheet materials with ease. • Multi Tool Versatility Equipped with 6 tool slots, it supports simultaneous loading of multiple punch tools, enabling fast tool changes and maximizing uptime. • Precision X Y Servo Control Dual servo motors govern the Y axis with high sensitivity and coordinate with servo feeder systems to punch at any X & Y coordinate—ideal for complex part layouts. • Efficient Hydraulic Drive A dedicated 22 kW hydraulic pump powers the punching mechanism, combining servo responsiveness with hydraulic force for reliable output. • High-Speed Punching Capable of up to 90 punches per minute, it delivers both speed and agility to meet demanding production schedules. • Integrated Scrap Management Outfitted with an automatic scrap conveyor, it ensures continuous operation by efficiently removing punched material waste. _____ Why Servo Punch Press Technology Stands Out Our machine leverages the cutting-edge advantages of servo press systems, which far surpass traditional mechanical or hydraulic presses: • Exceptional Precision & Programmability: Servo-driven systems offer tight control over force, speed, and position, ensuring consistent results and the flexibility to fine-tune stroke profiles. • Energy Efficiency & Sustainability: Power is used only during punching operations—resulting in substantial energy savings and reduced operational costs. • Quiet, Controlled Operation & Lower Maintenance: Compared to conventional systems, servo presses run with less noise and fewer mechanical wear parts, boosting workplace comfort and reducing downtime. • Enhanced Safety & Monitoring: Advanced feedback controls and real-time monitoring help detect anomalies early, minimizing risk and improving overall process reliability. • Ultimate Flexibility with Programmable Motion: Custom stroke profiles, dwell times, and speed modulation empower operators to adapt instantly to varied parts and production requirements.

Condition: new, bore capacity in steel (diameter) 32 mm throat 300 mm bore stroke 160 mm morse taper 4 MK table: 460 x 460 mm turning speeds 75 - 3200 U/min engine output 1,5 kW column diameter 125 mm thread M16 ST60 feed 0,10/0,18/0,26 mm/U dimensions 800 x 500 x 2200 mm weight 350 kg - automatic drill feeds (magnetic clutch) - Height adjustable and angle adjustable table - Movable work table - Integrated cooling system Hedpekahu Rofx Ah Nsng - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting.

Year of construction: 2025, operating hours: 24 h, condition: new, functionality: fully functional, empty load weight: 6,500 kg, machine/vehicle number: AVB-68HELIX, Heavy duty and robust body type of wood shaving machine, AVB-HELIX68 wood shaving machines are one of our most popular machines with a higher industrial capacity for the market. Designed to process both logs and offcuts with a minimum material size, this machine is suitable for round log shaving and wood waste processing. It is equipped with T.C.T. carbide blades and also fitted with a hopper pressing system for small pieces and the offcuts (optional). The working principle with a planer blade and carbide blades is available. TECHNICAL DETAILS; TECHNICAL SPECIFICATIONS AVB-68HELIX Number of Cutterheads 6 Length of Cutter Head 80 cm Number of Blades 240 blades/cutter head Power Supply 6 *11 KW = 66 KW (88,5 HP) Hopper Working Hydraulic Hopper Dimensions 2300*800*1100 mm Working Voltage 380 V 50-60 Hz Conveyor Band Motor 1,5 KW Hydraulic Motor 11 KW Total Power 78,5 KW Cutterhead Speed 3000 rpm Cutterhead Diameter 160 mm Shaving Depth 0,2 mm - 2 mm Max.Log Input Length 10-220 cm Max.Log Input Width 10 - 75 cm Working Distance 2400 mm Machine Dimensions L5700 x H1700x W1600 mm Hsdsidxu Hepfx Ah Nong Weight 5.600 kg Production Capacity 2000-2500 kg/h

Condition: new, functionality: fully functional, power: 90 kW (122.37 HP), Year of construction: 2025, Plastic squeeze dryers are a vital part of plastic film washing lines. Hsdpfx Ajwg Sd Uoh Neng Washed films retain up to 30% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer is a must to dehydrate the washed film, increase the density of recycled film and fibre materials, increase the capcity of the following extrusion process and further refine the quality of final plastic pellets. Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would significantly reduce the productivity of the extruder and quality of pellets. The latest development for drying and recycling washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying , and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids to dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders, as the materials are so dry and dense they can be fed direct to extruders for pellet production.With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.

Condition: new, Type SX1325AP-2128 Axis: Useful working area axis X-Y-Z 2070-2800-100 mm Pieces clearance in Z 100 mm Max. traveling speed 70 m/min Max. working speed 30 m/min Working table: Phenolic multifunction Nr. of stops standard 10 (4X-6Y) Vacuum pump 4*5,5 kW(50/60 Hz), air cooled Electrospindle: Hodpfxsdz Edqj Ah Nong Standard power (S6) 9,5 kW, ISO30 Max. speed 24 000 rpm Tool changer: ATC carousel for 12 positions Lubrication: Automatic centralized lubrication Installation: Installed power 22-33 kW Compressed air cosumption 450 NL/min Extraction air consumption 3000 m3/h Extraction air speed 25 m/sec Suction hood diameter 2x150 mm Made in China Weight 3500 kg

Condition: like new (used), functionality: fully functional, Year of construction: 2025, 🔧 Innovation Meets Precision in Coil Processing 🔧 We’re proud to present our Coil Fed Laser Cutting Line – engineered for performance, precision, and flexibility. Hnedpfxewxwalo Ah Nsg 🎥 Whether you're processing Hot Rolled, Cold Rolled, Stainless Steel, or other metal materials, our line is built to deliver unmatched results. With advanced automation and high cutting accuracy, this solution is ideal for manufacturers seeking to boost productivity and reduce material waste. ✅ Thickness range: 0.5 – 4 mm ✅ Coil width: 200 – 1600 mm ✅ Max coil weight: 15 Tons Our system combines: 🌀 Decoiler – Smooth coil feeding 🛠️ Leveler – Perfectly flat sheets 💡 Laser Cutting – High-speed, high-precision shape extraction From coil to final part – all in one continuous, efficient process. 📩 Looking to increase efficiency in your production line? Let’s connect and discuss how our solution can power your business forward. hashtag#SheetMetal hashtag#LaserCutting hashtag#CoilProcessing hashtag#Industry40 hashtag#SmartManufacturing hashtag#Machinery hashtag#Metalworking hashtag#Innovation hashtag#Fabrication hashtag#Automation hashtag#EngineeringExcellence

Condition: new, Total height 1500 mm Total length 3000 mm 5 pneumatic cylinders Compressed air pressure 8 bar Travel of pneumatic cylinders 100 mm Hsdpfx Ahodpbn As Nsng Diameter of pneumatic cylinders 100 mm

Condition: like new (used), Year of construction: 2025, coil weight: 30,000 kg, number of straightening rollers: 9, conveyor belt width: 2,000 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness steel (max.): 10 mm, sheet thickness copper (max.): 20 mm, inner diameter: 508 mm, sheet thickness (max.): 10 mm, sheet thickness brass (max.): 20 mm, product height (max.): 10 mm, outer diameter: 2,000 mm, roller diameter: 156 mm, coil width: 2,000 mm, coil outer diameter: 2,000 mm, cutting length (max.): 6,000 mm, working width: 2,000 mm, stack height: 400 mm, Coil Cut to Length Line with Stacking ( 2 - 10 mm x 2000 mm x 30 Ton) Hjdjwutp Uepfx Ah Njng TFS Coils, Tin Plate, Galvanized, Stainless Steel, CR, HR, Brass, and Copper to be Cut to the length Teneke Sac, Aluminyum, Galvanizli Sac, Paslanmaz Çelik, HRP, DKP. Hydraulic Expansion Motorized Decoiler with Transmission Box Hydraulic Coil Car Servo Feeder Hydraulic Shear Automated Stacker COIL PROCESSING MANUFACTURER IN TURKIYE. Our cut-to-length line Our roll cutting lines that you need for cut-to-length sheets with a sheet width of 200 mm -2000 mm and a roll weight of 6,000 kg to 30,000 kg. Until recently, the iron and steel enterprises were producing sheet metal, since the coil sheet opening systems were not sufficiently developed. The developments in the coil sheet opening sector in recent years have led iron and steel businesses to produce coiled sheets. As a result of these changes in sheet metal production, the demand for coil sheet slitting and cut-to-length lines has started to increase and businesses have started to prefer the way of plating their own products. This situation also eliminates the cost of plate sheet stocking. At this stage, BOSPORAS offers solutions from A to Z, including cutting-to-length systems, uncoiling, straightening, feeding, guillotine shearing, conveyor and stacking of coiled sheets. The most distinctive feature of our Cut-to-Length Line is the cutting feature with the Rotary or Fly Guillotine shear system. It is a professional straightening thanks to the high quality and powerful Leveler Machine. And Cut to Length Line offers the possibility of automatic stacking of the materials. This is provided by the leveler cassette system.Suitable for all sheet material types from 0.3 mm to 10 mm. General features of the systems; Easy operation and maintenance with high level of automation Easy roll loading thanks to hydraulic uncoiler with loading trolley Maximum surface smoothness thanks to multiple straightening rollers Protecting sensitive surfaces with high quality rollers and carriers Burr-free and high-quality cutting automatic stacking system Lec Edpbveh E Sh Hovsac Compact design that takes up little space compared to its capacity Low cost, high quality, maximum efficiency.

Condition: new, Type MJ1435F Hsdjd Nlvpepfx Ah Neng Feed speed (inverter) 6-35 m/min. Spindle diameter 70 mm Diameter of sawblades 250-355 mm Cutting width 300 mm Cutting height 100 mm Min. cutting length 360 mm Motor power 22 kW Total power 26,1 kW Transport dimensions 2670x1200x1500 mm Weight 1700 kg Delivery term: ~ 3 months.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, sheet thickness aluminum (max.): 10 mm, coil weight: 30,000 kg, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness copper (max.): 10 mm, sheet thickness brass (max.): 10 mm, cutting speed: 100,000 mm/min, product height (max.): 6 mm, working width: 2,000 mm, total width: 6,000 mm, total length: 35,000 mm, total height: 3,000 mm, feed roller diameter: 156 mm, Professional Coil Slitting Line 0.3 - 3 mm x 1500 mm x 15 Ton We offer accurate and fast cutting & slitting for coil materials; Stainless Steel, Aluminum, Copper, Galvanized, Brass, and Bronze. BOSPORAS’s Cut to Length & Slitting Line Machinery is a certain solution for various Materials and Dimensions, for your customized projects with heavy coil industries. Easy Operation with High-Level Automation. High Quality and Maximized Efficiency with Minimized Operation Cost High Capacity with Compact Design Project-Specific Straightening Designs for Top Quality Surface Accuracy Precision Production with Material-Specific Quality Rollers and Transfer System High Quality Cutting without Scrap Automated Stacking System Solutions Double Head Hydraulic Expansion Decoiler with Transmission Box Coil Car Match Leveler Slitting Head Hydraulic Shear Tensioner and Separators Hydraulic Expansion Recoiler Hjdpfxewutlve Ah Nong Loop with Sensors Automated Hydraulic Bridges Exit Coil Car Quick Slitting Knife Change Coil Tilting Car

Condition: new, Type MB6023HK Hnedpfxoikv Acj Ah Njg Working width 230 mm Working height 150 mm 6 spindles B-4kw, R-4kw,L-5.5kw, T -7.5kw, T-5.5kw,B-4kw Spindle diameters 40 mm Feeding speed 5-30 m/min Total power. 38.25kw Transport dimensions 3750x1600x1500mm Weight 3400 kg Price 21300 Eur (EXW Jonava, Lithuania)

Condition: new, Year of construction: 2024, A vineyard post roll forming machine is used for vineyards and orchards to produce the stakes and posts. Normally, grape posts are 1.5-2mm thickness. The production line consists of Decoiler, Servo Feeder Straightener, Press, Stamping Tool, Roll Form Machine and Shear. Hedpet Tcz Uefx Ah Njng

Condition: new, Type DTL-20A modified Hnsdpfx Aswqn I Reh Njg Brush roll height 200 mm pneumatic grinding head height 200 mm Brush roll diameter 300 mm Pneumatic Grinding Head Diameter 100mm Diameter of spindle 25/30 mm Roller speed: frequency control Electric up and down Power 0.75 kW Transport dimensions 860x750x1100 mm Weight 140 kg Price 2050 Eur (EXW Jonava, Lithuania)

Condition: new, Year of construction: 2024, Sheet Metal Stamping Punching Embossing Perforating Tool Die Hodpfxst Tfv Uo Ah Nsng

Year of construction: 2020, condition: new, Type LBM250C Motors 2 x 0.75kW Working length 1300 mm Working thickness 80 mm Hodpfx Aefcg Epsh Nong Transport dimensions 2400x600x1300 mm Weight 340 kg

Condition: new, Type DTL-20A modified Hjdpfx Ahewn Da Rs Njng Brush roll height 200 mm pneumatic grinding head height 200 mm Brush roll diameter 300 mm Pneumatic Grinding Head Diameter 100mm Diameter of spindle 25/30 mm Roller speed: frequency control Electric up and down Power 0.75 kW Transport dimensions 860x750x1100 mm Weight 140 kg Price 2050 Eur (EXW Jonava, Lithuania)

Condition: new, Type 1300-2S Working width 1300 mm Hodpsm Dr Rgefx Ah Neng Min.working length 400 mm Working thickness 2-80mm Grinding roller speed - Frequency control Feeding speed 5-20 m/min Total motor power 6.27 kW Transport dimensions 1700x2100x1400mm Weight 1200 kg Price 6100 Eur (EXW Jonava, Lithuania)

Condition: new, Type 1000-2S Working width 1000 mm Hodpfx Ahem Dr Rne Nsng Min.working length 400 mm Working thickness 2-80mm Grinding roller speed - Frequency control Feeding speed 5-20 m/min Total motor power 4,12 kW Transport dimensions 1700x1600x1400mm Weight 800 kg Price 4130 Eur (EXW Jonava, Lithuania)

Condition: new, Type: Z4A Number of drills/spindles Various head variants are available 4x3 Distance between first and last spindle 2300 mm Adjustable drilling speed Height of the working table 840 mm Table dimensions 600x2350 mm Number of clamps 8 Motor power 6 kW(4x1,5) 400 V Hodpfx Ahjhmbkto Nong Motor r.p.m. 2840 r.p.m Working air pressure 6-8 bar Weight 425 kg Transporting dimensions 2450x960x1550 mm