Used Haas Sl 40 for sale (215)

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, table load: 1,814 kg, overall weight: 7,485 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 44,700 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis HAAS VF-3YT/50 was manufactured in 2019. It features an impressive X-axis travel of 1,016 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. The machine is equipped with a high-performance spindle capable of 10,000 rpm and a 30-position automatic tool changer. If you are looking to get high-quality machining capabilities, consider the HAAS VF-3YT/50 vertical machining centre we have for sale. Contact us for further details. • Condition: Used, fully operational • Operating/cycle hours: 6,744 h • Spindle/cutting hours: 4,454 hTravels • Spindle nose to table: 201–836 mm • Rapid traverse: 18 m/min • Maximum cutting feed: 12.7 m/minSpindle and tool changer • Maximum torque: 460 Nm • Drive system: Vector drive with 2-speed gearbox • Tool changer capacity: 30 toolsTable • Table size: 1,372 × 610 mm • T-slots: 7 • T-slot width: 15.9–16 mmShipping • Note: Dimensions listed as 1,370 × 660 × 630 mm are not overall machine dimensions • Export shipping dimensions (approx.): 3,970 × 2,600 × 3,230 mm • Approx. shipping weight: 7,485 kg Additional equipment • Chip conveyor with four additional augers • Haas Chip Lift • Through-Spindle Coolant (TSC), 300 psi / 21 bar • Programmable coolant nozzle • Coolant chiller • ACF 25-micron auxiliary coolant filter • Coolant mist condenser • Minimum Quantity Lubrication (MQL) • Automatic air gun • Through-Tool Air Blast (TAB) • PulseJet system • Renishaw Wireless Intuitive Probing System (WIPS) with probe riser block • Fourth-axis drive and wiring • High-Speed Machining (HSM) • DWO/TCPC (Dynamic Work Offsets/Tool Center Point Control) Chedpfszwd Aujx Afgec • RTAP-3 synchronized tapping • Wi‑Fi network connection and Wi‑Fi camera • Automatic door • High-intensity lighting • Approximately 15 tool holders • Complete documentation Technical Specification Taper Size ISO 50

Year of construction: 2009, condition: used, NH3 refrigeration system. Refrigeration system includes the following: - Compressor 1, GEA Grasso type OS3 - Compressor 2, GEA Grasso type OS3 - NH3 separator - Air condenser - Heat exchanger for energy recovery with pump - 2 x ice water pumps - Brewing water pump - 2 water coolers - Expansion tank with control cabinet for NH3 separator and compressors 1 and 2, with SIMATIC MULTI PANEL touch control Codpfx Aexbn Upefgjhc Additional title: refrigerant ammonia Brew water flow: 5 m3/h 2 bar Ice water flow: 15 m3/h 2 bar Refrigerant capacity: 85 kg Ammonia Compressor capacity: 145 m³/h Power: Q0: 2 x 119 kW Operation / Control: Siemens S7 Features: 2 x compressors: 145 m³/h, 26 kW with Frequency Converter, 37 kW nominal output; ammonia separator mounted on frame, with brewing water-cooler and ice water-cooler; air condenser on frame 3 x 2.95 kW; heat-exchanger for recovery with pump; 2 x ice water pumps ( 2.2 kW, 15 m3/h, 2 bar ); brewing water pump ( 1.1 kW, 5 m3/h, 2 bar ); expansion tank, max. permissible operating pressure: high pressure side: 22 bar, low pressure side: 16 bar

Condition: good (used), Haas ST-15 CNC lathe, year 2019. Chedjz Aaw Eopfx Afgoc

Condition: used, Vertical machining center, Haas MiniMill, year 2005... Cedpjy Idpxjfx Afgjhc

Condition: ready for operation (used), Year of construction: 2018, operating hours: 7,016 h, travel distance X-axis: 1,626 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis HAAS VM-6 was manufactured in 2018. It features an impressive X-axis travel of 1,626 mm, Y-axis travel of 813 mm, and Z-axis travel of 762 mm. If you are looking to get high-quality machining capabilities, consider the HAAS VM-6 vertical machining centre we have for sale. Contact us for further details. Cjdpfezh Hgdox Afgjhc

Condition: good (used), Haas Laser HL 1203D Optical configuration: 22-31-21-BX Laser class 4 1500 W 1064 nm Financing through our bank is also possible. komplett-konzept.leasingo.de Csdoxam Ryopfx Afgohc You can find more items—new and used—in our shop! International shipping costs on request!

Condition: used, Haas St 10, 6.5" Diameter 3 Jaw Chuck, Serial No 3092094, Year 05/2015, Complete with Multifeed MX-1B Bar Feed Unit, Note no tailstock. Specifications: Swing: 25.25" Machining Length: 16.5" Chuck Size: 6.5" Bar Capacity: 1.75" Chedpfx Ajzvrd Rjfgoc Power: 15 hp Max RPM: 6,000 RPM Turning Dia: 14"

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 3098034, travel distance X-axis: 203 mm, travel distance Z-axis: 762 mm, spindle speed (max.): 1,800 rpm, bed width: 445 mm, center width: 900 mm, TECHNICAL DETAILS Swing diameter over bed: 900 mm Centre height: 450 mm Centre distance: 900 mm Bed width: 445 mm X-axis travel: 203 mm Codpsy Rxxmofx Afgshc Z-axis travel: 762 mm Spindle bore: 60 mm Max. spindle speed: 1,800 rpm MACHINE DETAILS Control: CNC Dimensions & Weight Dimensions (L x W x H): 2,400 x 1,600 x 1,950 mm Weight: 2,000 kg Transport packages: 2 pcs EQUIPMENT Documentation CE marking

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,775 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 239 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 584 mm, spindle motor power: 22,400 W, number of axes: 4, This 4-axis HAAS DS30Y horizontal turning machine was manufactured in 2023. It features a maximum part swing of 533 mm and a maximum cutting diameter of 349 mm. The machine is equipped with a robust turret that accommodates 12 tools and offers a maximum cutting length of 826 mm. If you are looking to get high-quality turning capabilities, consider the HAAS DS30Y machine we have for sale. Contact us for further details regarding this machine. • Capacities (S.A.E / Metric) • Chuck size: 10.0 in (254 mm) • Max part swing: 21.0 in (533 mm) • Max cutting diameter (with BMT65 turret): 13.75 in (349 mm) • Max cutting length (varies with workholding): 32.5 in (826 mm) • Bar capacity: 3.00 in (76 mm) • Between centers: 32.5 in (826 mm) • Feedrates (S.A.E / Metric) • Rapids on X: 472 ipm (12.0 m/min) • Rapids on Y: 472 ipm (12.0 m/min) • Rapids on Z: 945 ipm (24.0 m/min) • Axis Motors (S.A.E / Metric) • Max thrust X: 4100 lbf (18,238 N) • Max thrust Y: 2300 lbf (10,231 N) • Max thrust Z: 5100 lbf (22,686 N) • Main Spindle (S.A.E / Metric) • Spindle nose: A2-6 • Drive system: Direct speed, belt drive • Max torque: 275.0 ft-lbf @ 500 rpm (373.0 Nm @ 500 rpm) • Draw tube bore: ø 3.0 in (76 mm) • Spindle bore: ø 3.50 in (88.9 mm) • Main Spindle C Axis (S.A.E / Metric) • Max speed: 60 rpm • Max rating: 5.0 hp (3.7 kW) • Positioning (±): 0.01° • Brake diameter: 13.9 in (353 mm) • Brake holding torque: 250 ft-lbf (339 Nm) • Control type: Interpolated motion and positioning • Secondary Spindle (S.A.E / Metric) • Chuck size: 8.3 in (210 mm) • Spindle nose: A2-5 • Drive system: Direct speed, belt drive • Max rating: 15.0 hp (11.2 kW) • Max speed: 4000 rpm • Max torque: 100.0 ft-lbf @ 870 rpm (135.6 Nm @ 870 rpm) • Spindle bore ø (non-through): 0.81 in (20.7 mm) • Secondary Spindle C Axis (S.A.E / Metric) • Max rating: 5.0 hp (3.7 kW) • Max speed: 60 rpm • Positioning (±): 0.01° • Brake diameter: 8.5 in (216 mm) • Brake holding torque: 140 ft-lbf (190 Nm) • Control type: Interpolated motion and positioning • Secondary Spindle Positioning (M119) (S.A.E / Metric) • Positioning (±): 0.02° • Brake diameter: 8.5 in (216 mm) • Control type: Positioning only • Turret (S.A.E / Metric) • Number of tools: 12 stations • OD vs ID tools: Any combination (will vary with turret) • Boring bar rear clearance (from back of turret): 4.00 in (102.0 mm) • Live Tooling (S.A.E / Metric) • Max speed: 4000 rpm • Drive ratio: 1:1 • Tooling: BMT65 • General (S.A.E / Metric) • Coolant capacity: 55 gal (208 L) • Air Requirements (S.A.E / Metric) • Air required: 4 scfm @ 100 psi (113 L/min @ 6.9 bar) • Inline air hose: 3/8 in • Coupler (air): 3/8 in • Air pressure min: 80 psi (5.5 bar) • Electrical Specification (S.A.E / Metric) • Drive system: Direct speed, belt drive • Spindle power: 30.0 hp (22.4 kW) • Input AC voltage (3 phase) - Low: 220 VAC; Full load amps (Low): 70 A • Input AC voltage (3 phase) - High*: 440 VAC; Full load amps (High*): 35 A • Dimensions - Shipping (S.A.E / Metric) • Domestic pallet: 171 in x 90 in x 98 in (434 cm x 229 cm x 249 cm) • Export pallet: 171 in x 90 in x 98 in (434 cm x 229 cm x 249 cm) Additional equipment • Bar feeder Technical Specification Codpfxszhwx Do Afgohc Counter Spindle Yes Driven Tools Yes

Year of construction: 2006, condition: ready for operation (used), Number of axes: 3, table dimensions: 1210x267mm, max. spindle speed: 4000rpm, weight: approx. 2t. An on-site inspection is possible. Chsdpfoy Uyf Ajx Afgec

Year of construction: 2010, condition: ready for operation (used), Travel X/Y/Z: 1016mm/508mm/635mm, speed: 10000rpm, table dimensions X/Y: 1219mm/457mm, max. table load: 1550kg, tool positions: 20, rapid traverse X/Y/Z: 25m/min/25m/min/25m/min. Machine dimensions X/Y/Z: approx. 4000mm/2800mm/2600mm, weight: approx. 5400kg. Documentation available. On-site inspection is possible. Cjdou T Rgqspfx Afgjhc

Condition: used, Year of construction: 2008, functionality: fully functional, Used HAAS rotary table model HRT310 complete with HAAS pneumatic drive and tailstock. Cjdpfxowu Uahs Afgohc

Condition: used, Year of construction: 2006, centre height 175 mm centre distance 300 mm number of spindle speeds 2.000 - 8.000 Codpfjmd Didex Afgehc control SIEMENS - 840 D machine weight ab. 7.500 kg surface area 1.000 x 270 mm number of T-slots 3 groove width 12 H7 mm flute distance 50 mm spindle diameter in front bearing 55 mm Tool and Cutter Grinder | HAAS - MULTIGRIND AF1 Additional equipment: - Tool laser measuring system: Blum - Lasersystem MINI-MICRP-NANO The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: AF 1 | AF-1

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, table load: 680 kg, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 762 mm Travel Y-axis: 406 mm Travel Z-axis: 508 mm Table length: 914 mm Csdpfjx Up Dhox Afgjhc Table width: 356 mm Table load capacity: max. 680 kg Spindle speed: 12,000 rpm Feed Rapid traverse X-axis: max. 35.6 m/min Rapid traverse Y-axis: max. 35.6 m/min Rapid traverse Z-axis: max. 35.6 m/min Tool Changer Capacity: 24+1 Tool holder: CAT 40 Max. tool diameter: 76 mm Tool change time: 1.6 s Chip-to-chip time: 2.2 s MACHINE DETAILS Machine weight: 3,629 kg

Condition: excellent (used), Year of construction: 2013, Haas-Mondomix -Buhler , A-15, 2013, continuous aerator for mixing and whipping, marshmallow & nougat, choco pie, chocolate and creams for sugar confectionary and bakery with Touch screen control, with product pump Chsdpfx Aof Azwzjfgjc In good condition. with mondotherm

Condition: excellent (used), functionality: fully functional, rotary table diameter: 310 mm, The TR310 is a dual-axis tilting rotary table that provides maximum rigidity and accurate performance for 3+2 and full 5-axis machining of medium to large parts. Scale feedback on the A (tilting) axis improves positioning accuracy and repeatability. Cjdpeztakaefx Afgshc Add 4- and 5-axis capabilities to your machine. Easy plug-and-play connection to Haas machines. Industry-leading performance and capabilities. Heavy-duty design.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 23,838 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, rotational speed (max.): 7,500 rpm, Submitting a bid obligates you to collect the item on time by 30.01.2026! TECHNICAL DETAILS Travel X-axis: 1,270 mm Travel Y-axis: 508 mm Travel Z-axis: 635 mm Spindle speed: 7,500 rpm Table size: 1,320 mm x 455 mm T-slots: 14 mm MACHINE DETAILS Operating hours: 23,838 h Tool changes: 300,000 EQUIPMENT SK 40 taper with 40-position automatic tool changer Note: The two vices are not included in the scope of sale and delivery. Cedsx Nvv Hspfx Afgshc

Condition: good (used), Year of construction: 2015, Traverses XYZ: 762 x 508 x 508mm, 500mm Diameter table, Csdpfx Ajkticxofgohc max table weight 300kg, table tilt +120°, -35°, 22.4kW, 12000rpm, CT40, 40 station tool changer, coolant, Tool Setter, Programmable coolant, swarf conveyor,

Condition: refurbished (used), Year of construction: 2004, Completely overhauled Haas Multigrind HT grinding machine, available in Q3/2026. Used for re-sharpening of hobbing cutters / beveloid gear cutters / cutting rotors / form cutters / industrial knives / circular knives / spur gears / skiving tools, and other workpieces / components. Chodpjmk Hhcefx Afgoc Control system: Siemens 840 D X-axis: 650 mm Y-axis: 400 mm Z-axis: 280 mm A-axis (rotary table): 360° SK50 C-axis (rotary table): 270° X3-axis: electrically driven with tailstock Grinding spindle: HSK50 Dressing unit Tool changer: 10-position magazine Coolant system: Turbo separator Extraction system: LTA CO2 fire extinguishing system Internal handling with workpiece pallet according to customer requirements Clamping devices according to customer requirements Additional accessories available ex-works Software can be customized according to customer requirements Pre-acceptance at the factory and commissioning, training, and final acceptance at the customer's site Financing / lease-purchase possible Changes possible

Condition: ready for operation (used), Year of construction: 2008, operating hours: 1,752 h, functionality: fully functional, machine/vehicle number: 2052592, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 813 mm, table load: 4,536 kg, spindle speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 1,626 mm Travel range Y-axis: 1,270 mm Travel range Z-axis: 813 mm Table length: 1,626 mm Table width: 914 mm Table load: max. 4,536 kg Spindle speed: 6,000 rpm Drive system: geared head Torque: max. 610 Nm at 500 rpm Power: max. 22.4 kW Thrust force X/Y axis: max. 24,910 N Thrust force Z axis: max. 33,362 N Rapid traverse: max. 13.7 m/min Cutting feed rate: max. 12.7 m/min Tool diameter with full tooling: max. 102 mm Tool diameter with free adjacent positions: max. 254 mm Tool-to-tool time: 10.3 s Chip-to-chip time: 12.6 s MACHINE DETAILS Dimensions (L x W x H): 3,660 x 3,880 x 3,190 mm Chsdozd Tcdspfx Afgsc Operating hours (see image) Spindle hours: 1,752 h Servo hours: 15,789 h

Condition: excellent (used), Year of construction: 2010, Excellent condition can be demonstrated if required we also have a video of it running Cedpfxsq Rcils Afgshc we have also got a tailstock if required

Condition: used, Dual-spindle Haas DS-30Y with only 742 spindle hours — Y axis, full C axes and 6,000-rpm live tooling for complete machining in one setup. Factory-fitted with the ATP tool presetter, LCC3 chip conveyor and auto jet blast on the sub-spindle. Haas DS-30Y — Year of manufacture 2023 CNC CONTROL Controller: Haas Next Generation Control (NGC) X-axis travel mm: 239 Z-axis travel mm: 826 Y-axis travel mm: ± 51 Max. turning length mm: 826 Cedpjzv T Nnefx Afgehc Max. turning diameter mm: ø 349 Swing over bed mm: ø 533 Spindle bore / bar capacity mm: ø 88,9 / 76 Rapid traverse m/min: X/Y: 12 / Z: 24 Tool positions per turret: 12 Tool holder type (VDI / BMT / others): BMT65 Driven tools max. speed rpm: 6.000 MAIN SPINDLE Max. spindle speed rpm: 4.500 COUNTER / SUB-SPINDLE Counter spindle max. speed rpm: 4.000

Condition: ready for operation (used), Year of construction: 2014, operating hours: 5,316 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 213 mm, travel distance Y-axis: 51 mm, travel distance Z-axis: 572 mm, number of axes: 3, This 3-axis HAAS ST-20Y was manufactured in 2014. It features a CNC lathe with C and Y-axis capabilities, a spindle speed of 4000 rpm, and a chuck size of 8 inches. Additional features include a 12-station turret, chip conveyor, and a programmable hydraulic tailstock. Ideal for precision turning operations. If you are looking to get high-quality turning capabilities consider the HAAS ST-20Y machine we have for sale. Contact us for more information about this machine. • Chuck size: 8" (210 mm) Codpfox D Nzpsx Afgjhc • Programmable hydraulic tailstock: MT4 • Standard program memory: 1 GB Additional equipment • Chip conveyor • Automatic tool presetter • Part catcher • USB port • 6 live tools (3 axial and 4 radial) • BOT holder and VDI holder

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 750 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 500 mm, controller manufacturer: HAAS, controller model: na, spindle speed (max.): 8,000 rpm, spindle motor power: 7,500 W, number of axes: 4, This 4-axis HAAS MIKRON VCE 750 was manufactured in 2000. It features a table surface of 900x350 mm, a spindle speed of 8000 rpm, and a spindle motor power of 7.5 kW. Equipped with a conversational HAAS CNC, electronic handwheel, and a chip conveyor screw type, this vertical machining centre is ideal for detailed and precise machining tasks. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Table surface: 900x350 mm • Table weight: 340 kg • Electronic handwheel • 3-color status light • Chip conveyor: screw type • Programmable coolant nozzle • 4th axis: 360000° Extra Information Chsdpfx Afeyaitfegec Full Documentation

Condition: good (used), Trumpf Vectormark Type: VMc2 Trumpf Vectormark laser marker with Fuchs extraction and filtration unit Trumpf Vectormark GREEN 532nm Trumpf VMc2 Laser marker, with frequency-doubled diode-pumped Nd:YAG laser with Hurryscan 10 - galvanometer head from Scanlab Fuchs extraction and filtration unit TKFD The integrated pre-separator ensures high filter capacity Different filter stages are possible and can be perfectly adapted individually Ideal for confined spaces – can be placed under a table or integrated into machines Welding fume extraction class W3, IFA certified Cedpfxozdqcue Afgehc TKFD can also be transported in the trunk without modification Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.