Used Guard for sale (3,419)

Condition: excellent (used), CATALOG NUMBER 7541 Njdpfxoy R Dvde Ad Sewh Technical Specifications: - Maximum diameter of main saw blade (without scorer): 400mm - Maximum diameter of main saw blade (with scorer): 350mm - Blade bore diameter: 30mm - Maximum cutting height for 400mm blade: at 90 degrees – 120mm, at 45 degrees – 85mm - Maximum cutting height for 350mm blade: at 90 degrees – 95mm, at 45 degrees – 67mm - Main blade adjustable vertically and for angle - Blade guard - Equipped with side sliding table - Cutting length on sliding table: 1700mm - Cutting width on sliding table: 1400mm - Cutting width at fence: 1350mm - Main motor power: 6kW - Table dimensions: 1190x990mm - With table extension: 1880mm - With table enlargement: 1890mm - With scorer unit - Maximum scorer blade diameter: 120mm - Scorer spindle diameter: 20mm - Scorer motor power: 0.75kW - Three spindle speeds: 3500, 4500, 6000 rpm - Brake - Extraction port diameter: 80, 120mm - Machine dimensions (LxWxH): 3050x2200x1600mm - Weight: 800kg ADVANTAGES – Manufactured in Poland – DTR documentation included – Blade guard – Equipped with scorer unit – With table extension and enlargement – Used saw, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on exchange rate 4.2 EUR) (Prices may change with significant rate fluctuations)

Condition: excellent (used), Catalogue number: 7759 TECHNICAL DATA Circular saw: - Max blade diameter: 350mm - Spindle: 30mm - Blade adjustable front/back, up/down, angle - Pneumatic movement of the saw unit front/back - Blade guard - Motor: 2.2kW I and II milling spindles: - Tenoning spindle: - Spindle diameter: 40mm - Spindle working height: 150mm - Spindle lock - Pneumatic movement of units front/back - Manual up/down adjustment - Max cutter diameter: 300mm - Motor approx. 7.5kW Nsdpfx Adsy Ry H Sj Sewh - Side sliding table – manual traverse - Table dimensions (L/W): 1000x380mm - Angle fence - Pneumatic workpiece clamp - Dimensions (L/W/H): 2600/3200 (for shipping 2200)/1540mm - Weight: 1450kg ADVANTAGES – German manufacture – 3-spindle machine – Not repainted – Very good condition – Used tenoner Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at 4.2 PLN/EUR (In the case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7762 TECHNICAL DATA THICKNESSER: - shaft width: 320 mm - 3-knife planer shaft - max thickness of the processed element: 180 mm - thicknesser shaft guard - from above: – anti-kickback fingers – feed shaft, toothed – planer shaft – outfeed shaft, smooth, feed CIRCULAR SAW: - max blade diameter: 300 mm - max cutting height: 80 mm - blade bore diameter: 30 mm - adjustable blade up/down - cutting width with fence: 270 mm - table dimensions: 750x460 mm - fence SPINDLE MOULDER: - spindle diameter: 30 mm - adjustable spindle up/down - spindle height: 100 mm - fence - extraction port diameter: 100 mm - dimensions (LxWxH): 1700x2400x1100 mm - weight: 340 kg ADVANTAGES – Bulgarian production – Very good condition – Multi-function, used Net price: 6,900 PLN Net price: 1,640 EUR at exchange rate 4.2 EUR Nwodpfx Adey N Rc Ie Soh (Prices may vary with larger fluctuations)

Condition: excellent (used), CATALOG NUMBER 7623 Technical data: - max saw blade diameter 300mm - spindle diameter 30mm - blade guards 2 pcs - pneumatic blade feed - saw units adjustable to 45° - manual adjustment of saw unit spacing Njdpfx Adox Tpukj Sewh - min cutting length at 90° 300mm - max cutting length at 90° 4600mm - cutting width 90mm - cutting height at 90° 90mm - pneumatic clamps 2 pcs - control buttons - material supports 3 pcs - main motor 2×1.1kW - extraction port diameter 2x90mm - dimensions (L/W/H) 5030x1150x1400mm - weight approx. 500kg ADVANTAGES – Italian production – tiltable saw units – used saw, in very good condition Net price: 15900 PLN Net price: 3780 EUR (depending on the rate of 4.2 EUR) (Prices may change with larger fluctuations)

Condition: excellent (used), CATALOG NUMBER: 7081 TECHNICAL SPECIFICATIONS - JOINTER: - Shaft width: 260 mm - Table length: 1190 mm - Cast iron fence, angle adjustable - Adjustable tables - THICKNESSER: - Max workpiece thickness: 110 mm - Thicknesser shaft guard - From above: - Anti-kickback fingers - Toothed feed roller - Planing shaft - Smooth outfeed roller - Extraction port diameter: 85 mm - CIRCULAR SAW: - Max blade diameter: 160 mm - Cutting height: 25 mm - Blade bore diameter: 30 mm - Blade height adjustable (up/down) - Blade guard Nwedpfx Adsx Swwdj Seh - Cutting width with fence: 160 mm - Table dimensions: 710 x 420 mm - SPINDLE MOULDER: - Spindle diameter: 30 mm - Spindle height adjustable (up/down) - Spindle height: 110 mm - Max tool diameter: 190 mm - Fence - Motor approx. 2.2 kW - Dimensions (L/W/H): 1200 x 900 x 800 mm - Weight: 325 kg ADVANTAGES - Compact, takes up little space - Very good condition - Used multifunctional machine Net price: 7,900 PLN Net price: 1,880 EUR (based on 4.2 EUR/PLN exchange rate) (Prices are subject to change due to currency fluctuations)

Condition: used, machine/vehicle number: LC555, Used aseptic filling line Tetra Pak A3 FLEX 1000SQ 7000 l/h General description of the line The Used aseptic filling line Tetra Pak A3 FLEX 1000SQ 7000 l/h provides an industrial configuration specifically designed for the sterile filling of liquid food products. It particularly suits sensitive items such as UHT milk and fruit juices, which require controlled processing environments. Moreover, the system operates with 1-liter square containers and reaches a production capacity of 7,000 liters per hour. As a result, it ensures high microbiological quality standards. In this configuration, each machine plays a critical role in maintaining aseptic conditions from filling to final packaging. Aseptic filler Tetra Pak A3 FLEX At the heart of the Used aseptic filling line Tetra Pak A3 FLEX 1000SQ 7000 l/h, the Tetra Pak A3 FLEX filler (version 100V), manufactured in 2004, performs aseptic filling using an integrated sterilization system, microbial barrier, and precise dosing mechanisms. Consequently, it processes pasteurized or sterilized products intended for extended shelf life and keeps them intact without requiring refrigeration. Furthermore, the filler maintains a sterile environment throughout the entire cycle. In addition, it ensures consistent product dosing and eliminates variability in filling performance. As a result, manufacturers can rely on this equipment to meet strict food safety requirements. Aseptic capper Tetra Pak TCA88 The line also includes the Tetra Pak TCA88 capper, built in 2006. This module applies plastic caps to filled containers using induction or mechanical systems that ensure hermetic sealing in an aseptic environment. Moreover, the capper synchronizes precisely with the filler to ensure uninterrupted operation. In contrast to conventional systems, this integration significantly reduces the risk of contamination after filling. In the same way, the TCA88 includes built-in quality control functions that verify each cap’s position and torque. Meanwhile, Tetra Pak designed the unit with safety features such as interlocked guards and error monitoring systems, ensuring full compliance with industry standards. Cardboard packer TCBP70 in this used aseptic filling line Tetra Pak The Tetra Pak TCBP70 packer, manufactured in 2007, manages secondary packaging. This automatic system forms and fills corrugated cartons using wrap-around or preformed box configurations. Similarly, it operates with fully electronic controls that allow real-time adjustment and monitoring. Therefore, the machine supports flexible packaging layouts and rapid format changes. In addition, the TCBP70 includes safety systems such as light curtains and emergency stop devices. For example, if an operator enters the guarded zone, the system halts automatically to prevent accidents. As a result, the packaging process remains both efficient and secure. Industrial applications and operational benefits The Used aseptic filling line Tetra Pak A3 FLEX 1000SQ 7000 l/h targets producers in the dairy and beverage industries who require aseptic packaging capabilities. For instance, companies manufacturing milk, plant-based drinks, or fruit juices can benefit from the line’s ability to maintain sterility without cold chain logistics. In fact, the full integration of Tetra Pak modules allows manufacturers to achieve high energy efficiency, complete batch traceability, and reduced d... Nwodowkux Njpfx Ad Ssh

Condition: used, Year of construction: 2000, operating hours: 26,600 h, machine/vehicle number: LC612, Used Tetra pak line Overhauled TBA 19 200 ml slim Technical Specifications & Performance DataThis used bottling line is a second hand Tetra Pak aseptic carton packaging solution configured for 200 ml Slim packs. It is engineered for industrial packaging and beverage production of milk and juice products, with reliable performance and efficient downstream handling.Configuration: Tetra Pak TBA/19 200B Slim filler + TSA21 straw applicator + TCP70 case packer + conveyor line + line controller and paper trolleyProduction speed: up to 7,500 packs/hourPack volume: 200 ml SlimFilling technology: AsepticContainer type: Carton (brick packs)Main models and codes: TBA/19 200B (Dev. Step 010V), TSA21, TCP70Operating hours: 26,600Indicative years: filler 2000, packer 2008, straw applicator 2000Advanced Automation & Control SystemsThe line is equipped with industrial automation architecture suitable for high-uptime food and beverage operations. Assessment indicates a GE PLC platform on downstream equipment with recommended PLC and I/O cover upgrades to ensure long-term reliability.Control: Central line controller with integrated conveyor logicPLC/HMI: GE PLC upgrade recommended for DE modulesChangeover: 200 ml Slim change kit included; additional format parts may be required for other sizesSafety: Guarding and interlocks typical of aseptic packaging machineryProduction Line Integration CapabilitiesThis second hand bottling equipment is designed for inline operation from aseptic filling through straw application and case packing. Conveyors provide smooth transfer between machines, enabling balanced production flow and efficient accumulation.Inline operation: Filler → Straw applicator → Case packerMaterial handling: Conveyor line with integration to line controllerApplication range: Ideal for milk and juice in 200 ml Slim cartonsScalability: Potential to adapt to additional carton sizes with proper change partsMachine Condition & Maintenance HistoryThe line has been assessed after maintenance activities and prior to full recommissioning. The filler can be operated up to production step (water test completed). Downstream equipment (DE) powers on but requires further interventions before heating and full operation. An overhaul is recommended with component replacements across superstructure, machine body, jaw system, final folder, service unit, strip applicator, and electrical systems.Current status: Under maintenance/refurbishmentCondition summary: Filler fair-to-poor; DE in poor condition; overhaul advised (6,000/8,000/12,000-hour packages)Operational Performance & VersatilityEngineered by Tetra Pak for aseptic beverage production, the line supports long-life products such as UHT milk and ambient juices. The TSA21 straw applicator ex... Nwsdpfoyvilzex Ad Soh

Condition: used, Year of construction: 2009, operating hours: 5,000 h, machine/vehicle number: LC631, Used revised Tetra Pak TBA19 330 Prisma line 9000 bph - 2008Technical Specifications & Performance DataThis used bottling line is a revised Tetra Pak A3 Flex V300 configuration designed specifically for 0.33 L Tetra Prisma cartons, ideal for second hand industrial packaging and beverage production environments. Engineered for aseptic operation, it supports reliable high-speed packaging for dairy and juice applications with consistent quality and uptime.Manufacturer: Tetra PakMain filler: TBA 19, Version 300VProduction speed: Up to approx. 7,500 packs/hourFormat compatibility: 0.33 L Prisma (330 ml)Container type: Carton (Tetra Brik/Tetra Prisma)Filler year: 2009Capper: CAP 30 for Dream Cap (YOM 2019)Packer: TCBP 32 cardboard packer (YOM 2012)Ancillary equipment: Conveyor line, line controller, Domino printer, paper trolleyAseptic packaging: Yes (for long shelf-life products)Reported hours: Filler approx. 5.000 h; Packer approx. 30,000 h; Capper approx. 25,000 hAdditional component: Bonino mechanical feeder (2014) — 460 V, 0.70 A, 60 Hz, approx. 0.8 kWAdvanced Automation & Control SystemsThe line features integrated automation for synchronized operation across filling, capping, packing, and conveying. The line controller coordinates start/stop, speed matching, and fault handling, while the Domino printer integrates for inline coding without impacting throughput. Safety interlocks and guarding protect operators and maintain hygienic integrity during beverage production.Centralized line controller with coordinated speed controlPrinter integration for date, lot, and traceability codingOperator safety protections and interlocked guardsFormat-dedicated setup for 0.33 L Prisma to ensure fast, repeatable changeoversProduction Line Integration CapabilitiesDesigned as a complete packaging line, it integrates seamlessly from aseptic filling to secondary packaging. Conveyors are configured to maintain gentle carton handling and stable flow to the packer. The platform is optimized for dairy and juice, supporting consistent sealing, Dream Cap application, and case packing for distribution.Inline operation across filler, capper, printer, conveyors, and packerCarton handling tailored to 0.33 L Prisma geometrySuitable for milk and juice production workflowsDownstream-ready case packs from the TCBP 32Machine Condition & Maintenance HistoryThe line was previously used for milk and juice and is reported in post-maintenance condition. Operating hours indicate regular industrial use typical of second hand bottling equipment. The published figures support informed planning for preventive maintenance and remaining useful life.Status: After maintenance, ready for operationFiller hours: approx. 24,800Packer hours: approx. 30,000Capper hours: approx. 25,000 Nwsdpfey Rrirex Ad Seh

Condition: used, Year of construction: 2004, machine/vehicle number: SO136, Used combiblock KRONES contiform S8 + mecafillTechnical Specifications & Performance DataThis Krones Contiform S8 combi blow molding unit is integrated with a Krones Mecafill filler and Krones capper, delivering reliable performance for modern beverage production. Built for PET bottle handling, it supports common still and sparkling water formats on a compact rotary platform. As part of a used bottling line or as a stand-alone combi station, it offers robust engineering and consistent output for industrial packaging operations.Manufacturer: KronesModel: Contiform S8 (combi with Mecafill filler and Krones capper)Year of manufacture: 2004Production speed: up to 12,800 bottles per hourContainer material: PETNeck type: AlaskaBottle formats: Compatible with 0.5L, 1.0L, 1.5L bottle formatsMaximum container height: 350 mmNo. of cavities (molds): 8Operating pressure: 40 barWork direction: ClockwiseLayout dimensions (approx.): Length 13022 mm, Width 10649 mmAdditional mechanics: 8 infeed/outfeed grippers; 220 mandrels on the preform handling pathAdvanced Automation & Control SystemsEngineered for dependable operation, this blow molding machine features an operator-friendly interface and modern control architecture to streamline setup, monitoring, and changeovers. Digital recipes help maintain repeatability across formats in second hand environments.HMI: KronesPLC: SiemensElectrical supply: 400 V, 3-phase, 50 HzAutomation: Rotary combi integration with synchronized blow, fill, and cap functions for stable throughputOperator protections: Safety guarding and interlocked access for maintenance zonesProduction Line Integration CapabilitiesThe Contiform S8 combi configuration enables seamless upstream preform handling and downstream filling and capping, minimizing footprint and transfer points. It integrates easily within a used bottling line, supporting conveyors, inspection, and downstream packaging machinery for beverage production.Operation modes: Integrated combi (blow–fill–cap) with rotary synchronizationFormat range: 0.5L to 1.5L PET bottlesApplication: Ideal for water bottling within industrial packaging and production line setupsMachine Condition & Maintenance HistoryThis machine has been overhauled and is guaranteed, prepared for immediate operation with compatible spare parts available. It combines the assurance of refurbished equipment with the value expected from second hand bottling equipment.Condition: Overhauled, guaranteed, ready for operationWarranty: 6 monthsOperational Performance & VersatilityDesigned for PET containers, this rotary... Nodpjy Szb Tjfx Ad Sowh

Condition: used, mileage: 10,000 km, power: 290 kW (394.29 HP), first registration: 10/2025, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: silver, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, ACTROS 18.400 Car transporter / Breakdown assistance vehicle Flashing beacon The vehicle can be taken over for driving assignments to Ulm / Bursa, Turkey if a suitable trailer is available upon request. Special equipment: Axle load - measuring system, Trailer Stability Assist (TSA), Trailer socket 12V / 13-pin, Audio system: Digital radio DAB / DAB+, Equipment package: Air conditioning, Equipment package: Safety (without roll stabilization), Brake connection standard and DuoMatic, CB radio, Interactive multimedia cockpit, Air horn, Driver assistance system: High beam assist and cornering light, Cab: with air suspension, Windscreen tinted with sunstrip, Transmission 12-speed - Type: G 211-12, AdBlue tank: 75 L, Electric sunroof, Upper comfort bunk, wide, Fuel tank: 390 L aluminum, left side, Additional fuel tank: 290 L aluminum, right side, Coolbox / refrigerator, Radiator grille, Two-cylinder air compressor, Enhanced engine brake, Wheelbase variant 4300 mm, Frame overhang 1800 mm, Smoker package, Rain sensor, Tire pressure monitoring system, Spare wheel, Additional remote control keys (2), Drawers under console, Seat cover/upholstery: Front passenger seat velour, Seat cover/upholstery: Driver's seat velour, Cab seats: Driver comfort air suspension seat, External sun visor, Side window sunblind, driver’s door, External storage flap left, Additional 12V power socket, 24V / 25 A socket in front passenger footwell, Additional 24V socket in front passenger footwell, Carpet covering on engine tunnel, Cab door extension, Sleeper cab curtain, Seat belt warning device Additional equipment: EURO 6 emissions standard, Overhead storage above windscreen with cover, Axle configuration: 4x2, Front axle load 7.5 t, Actros 5, Actros L cab, Heated maneuvering/front mirrors, 2-line trailer brake, Connections on left, Trailer socket 24V / 15-pin, Exhaust to right side, Powertrain 2 package, MirrorCam external mirror cameras, Batteries positioned side by side, Rear axle differential lock, Air connection in cab, Steel air tanks, Air unit with condensate monitoring, Medium air unit, Automatic headlight activation (light sensor), Driver assistance system: Attention Assist (fatigue detection sensor), Driver assistance system: Autonomous emergency brake assist (Active Brake Assist 5), Driver assistance system: Lane keeping assist, Cab: fixed entry step, Cab: Chrome interior package, Cab: hydraulic tilting device, Cab: L ClassicSpace, 2.30 m, tunnel 320 mm, LED perimeter lighting, Suspension: leaf/air, Front suspension 7.5 t, 2-leaf, Electric window lifters, No rear window, Alternator 100 A, regulated, Speed limiter, Rear axle with active lubrication, not regulated, Rear axle ring gear 440, Chassis/body: chassis, Lower comfort bunk, Central locking system, Electronically regulated steering pump, Multifunction steering wheel, Heated air dryer, Engine 10.7 L - 290 kW R6 diesel (OM 470), Engine variant OM 470, Application: regional/short-haul, Wheelbase undefined, Ramp mirror, Residual heat utilization, Disc brakes front and rear axle, Remote control keys (2), LED flashing side marker lights, Cab seats: passenger function seat, Cab seats: driver seat backrest foldable, Front splash guard, Front axle stabilizer, Lockable compartments behind driver and passenger seat, 12V socket in passenger footwell Nodpfx Aszhh N Hsd Sowh

Condition: new, power: 140 kW (190.35 HP), fuel type: diesel, overall weight: 5,500 kg, color: white, gearing type: automatic, number of seats: 1, total length: 7,336 mm, total width: 2,001 mm, Year of construction: 2025, Equipment: air conditioning, central locking, had accident, parking heater, soot filter, Sprinter 519 4x4 with M3 Preparation Optional partition wall and choice of single or double passenger seat can be supplied upon request. 4 identical vehicles available Special equipment includes: - Active Distance Assist DISTRONIC - Exterior mirrors without integrated indicator - Front side indicator lamps - Omission of load compartment/sliding door - Tachograph controls located front under headliner - No passenger side airbag - No load compartment partition wall - No seat in cab, right side - No lashing eyes - Exterior noise reduction features - Speed limiter set at 100 km/h - Grab handles on A-pillars - Partial LED rear lamps - Hold function - Interior: instrument panel air vents - Flip lid for storage compartment - Dashboard charging package (additional USB ports and 12V socket) - Cable duct at rear portal - Cable duct on sidewall - Heated steering wheel - Fog lights with cornering function - Programmable special module - Park package with reversing camera - Interior rearview mirror - LED High Performance headlights - Rear and front mud guards - Driver’s seat heated - Driver’s seat with lumbar support - Comfort suspension seat for driver - Low seat base for driver’s seat - Rear door step Nwedpfezhh Rdex Ad Soh - Rear underride guard - Cab heat insulation - Additional electric auxiliary air heater - Additional water heater Additional features: - 3rd brake light - Overhead storage above windscreen - Storage compartment below passenger dashboard - Adaptive brake light - Driver airbag - Acoustic package - Hill-start assist - Towbar wiring - trailer socket electrics - Power folding exterior mirrors - Electrically adjustable & heated exterior mirrors (both sides) - Blind spot assist for exterior mirrors - Outside temperature indicator - DAB tuner (digital radio) - Load compartment ceiling light with door contact - Automatic headlight activation - Rear right entry grab handle - Grab handle for sliding door at partition wall - Safety assist: turning assistant - Safety assist: active brake assist - Safety assist: active lane keeping assist - Safety assist: start info assistant - Safety assist: Attention Assist (drowsiness detection) - Safety assist: Intelligent speed assistant - Safety assist: breakdown management - Safety assist: crosswind assist - Digital tachograph - 250A alternator - 9-speed GTronic automatic transmission - Rear doors (opening angle 270 degrees) - Body/type: high roof box with extended rear overhang - Instrument cluster with color display - Communication module (LTE) for digital services - Main fuel tank: 93 litres - Steering column adjustable (manual) - Multifunction steering wheel - Truck registration (N1 category) - Side marker lights - Mercedes-Benz emergency call system - Engine: 2.0 L – 140 kW CDI Euro 6 - MBUX multimedia system (10.25" touchscreen) - 4325 mm wheelbase - Tyre pressure monitoring system - Reversing camera - Euro VI emissions standard - Windscreen wipers with rain sensor - Seatbelt warning system (driver and passenger side) - Fabric seat upholstery - Engine start/stop system - Mid-dashboard USB charging port - 92 Ah AGM battery - Navigation pre-installation (for MBUX) - Remote Service Plus pre-installation - Heat-insulating glass (windscreen with top band filter) - Permissible gross weight: 5.2 t - Rain sensor We can...

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Storage location: Garbsen Njdpfxsxnlgce Ad Sowh

Condition: excellent (used), Year of construction: 2016, Seydelmann K126 bowl cutter with tote bin loader. In almost new condition having only been used for 3,800 hours. Can be sold with full safety cage guarding system. Nsdpfxovthdfj Ad Sewh

Condition: good (used), Tweedy / Baker Perkins mixer available for immediate sale, complete with stainless guarding system and feed tanks etc. In nice condition, we think it was rebuilt by Turkington at some point. Ideal for bread making operation or can also be used for making batter (for crumpets, pancakes etc) Various change parts are available from the manufacturer. Nsdpfxoifz Ibj Ad Sewh

Condition: excellent (used), Year of construction: 2011, YEAR OF PRODUCTION: 2011 Technical specifications. - Basic machine Longitudinal stroke X = 700 mm Vertical stroke Y = 650 mm Transverse travel Z = 700 mm - Tool magazine with 295 tool places HSK A63 - Continuous rotary table at 360,000 divisions 65 rpm - 7-position multi-pallet from mm.500 x 500. Rotation footprint dia. 800 mm. - Allowable load on each pallet table kg 550 - No.01 Operator's station for loading/unloading workpieces - Spindle speed = 12,000 rpm - Refrigeration unit for conditioning the spindle cartridge - Spindle with provision for coolant supply through tool flange - Air-conditioned electrical control unit with air conditioner - Ecological protection working area and machine - Lamp for work area lighting - Scraping chip conveyor with rear exit - Chip evacuation augers - 750-l coolant collection tank with self-cleaning filter system; - Sealed top guard prepared for connection with centralized fume extraction system Nodpfx Adjuz Urpe Sowh - CNC FANUC 16 I Options included - C301 Piece Washing - C303 Tool Cone Washing - C410 Tool Monitor MCM - C305 Oil Remover - C333 Automatic coolant filler - C308 High pressure 65 Bar - C403 Tool Presence Control By Laser - C412 Balluff read/write system with JTERM-01 - C408 Marposs radio-frequency touch probe MIDA T36 - jFMX MCM supervisory system including Network Part Program

Condition: excellent (used), Professional precision lathe from the renowned German manufacturer PROXXON. Model PD 400 is designed for precision machining of metal, aluminum, brass, plastics, as well as small steel components. The machine is in very good technical and visual condition. It operates quietly and smoothly. The package includes a comprehensive set of accessories as shown in the photos, including lathe tools, documentation, drill chuck, and BISON lathe chuck. Ideal for workshops, model making, servicing, small-batch production, and precision work. Technical data: • Manufacturer: PROXXON • Model: PD 400 • Power supply: 230 V / 50–60 Hz • Spindle speed range: 80 – 2800 rpm • Motor power: • 240 W at 1400 rpm • 550 W at 2800 rpm • Speed control: 2 ranges • Lathe chuck: 3-jaw BISON • Tailstock with drill chuck • Precision guide bed • Handwheels with vernier scale • Chuck guard • Forward/reverse spindle rotation Included: • PROXXON PD 400 lathe • BISON lathe chuck • Drill chuck • Lathe tools • Spare inserts/tools Nwsdpfxey Sidps Ad Seh • Documentation and manual • Wrenches and accessories as shown in the photos Condition: Used, in very good condition. Shows normal signs of use. Complete machine, ready for operation. Applications: • Precision turning • Model making • Machining of small metal parts • Mechanical workshops

Condition: excellent (used), Professional paper drilling machine from the renowned German manufacturer Constantin Hang Maschinenfabrik Göppingen. Model 114-4 is equipped with four drilling heads designed for precise drilling of paper, documents, catalogs, calendars, and print materials. The machine is suitable for use in: • printing houses, • bookbinding shops, • print production facilities, • binder and catalog manufacturing, • technical documentation preparation. Robust German engineering guarantees high working precision and long-term durability. Technical specifications: • Manufacturer: Constantin Hang Maschinenfabrik • Model: 114-4 • Number of heads: 4 • Adjustable head distance • Adjustable worktable Nedpfey Nm A Rex Ad Sewh • Foot pedal operation • Safety guard • Made in Germany

Condition: excellent (used), Year of construction: 2004, operating hours: 292 h, overall weight: 160 kg, I am selling a Stolzenberg TTE 1000 sweeper. Stolzenberg TT E 1000 is a self-propelled sweeper with electric drive (batteries) designed for daily sweeping of large indoor areas (up to 8000m²), such as parking lots, small production halls and showrooms, etc. The suction system used allows removing dust and fine dirt also from textile surfaces (carpets, rugs). The sweeper does the work with two disc (side) brushes and cylindrical brushes, made of abrasion-resistant polyamide. TRS high-performance sweeping system Main brush drive Front/rear drive - to the rear axle through a differential mechanism Separate drive for each rear wheel Robust laser-welded frame construction, extremely impact resistant Rotating guards made of polyethylene Nwjdpfxeud A Hko Ad Soh Ergonomically positioned buttons Collects sand and fine dust Easy to operate Exceptionally large surface area of the filter and debris container Quick change mechanism of rollers and side brushes Very maneuverable (turning radius - 1 m) Quiet operation Electric filter cleaning system Extremely easy access for service work Trouble-free chain transmission Very powerful motor Ability to clean textile surfaces (carpets, rugs, etc.) Approximately 50% larger cleaning area compared to a manually operated sweeper having the same sweeping width Categories: STOLZENBERG, Sweeping machines Electric drive - 24 V, 900 W TWS sweeping method - two brushes Sweeping width - main brush (mm) 600 Width with 1 side brush (mm) 800 Width with 2 side brushes (mm) 1000 Chain transmission Brush drive yes Extraction yes Air flow rate (m³/h) 600 Trash container (l) 70 Filter surface area (m²) 3 Filter cleaning system electric Theoretical efficiency (m²/h) 6000 Practical output (approx. m²/h) approx. 70% of theoretical output = 4,200 Max. speed (km/h) 6 Max. surface slope (%) 20 Dimensions - L x B x H (mm) 1190 x 790 x 1089 Weight (kg) 160 ID: 905240967

Year of construction: 2009, condition: excellent (used), Elumatec SBZ 140, extended version: 7.6 meters Weight approximately 5000 kg Automatic tool changer 2-section clamping system 2 pneumatic stops Safety guard Light curtains Automatic clamping detection Central lubrication Coolant spray system Chip trolley Conditioning unit Max. spindle speed: 24,000 rpm Tool holder: HSK-63F, 8-position tool changer. Max. milling diameter: 80 mm Max. sawing diameter: 200 mm Compressed air: 7 bar The SBZ 140 is a 4-axis profile machining center (axes: X, Y, Z + A). It is designed for aluminum and thin-walled steel profiles. 4-axis CNC machining center (X/Y/Z + tilting/rotating axis A) X-axis: approx. 7900 mm travel Y-axis: approx. 850 mm travel Z-axis: approx. 650 mm travel A-axis (rotation/tilting): Freely programmable angle, -90° to +90° Axis travel speed: X-axis up to approx. 65 m/min, Y- and Z-axis up to approx. 60 m/min (in many configurations) Nedpfezhg S Tox Ad Sjwh Control: 4-axis CNC system, with PC control, color screen, USB & network. Software: eluCam. Automatic material clamping, automatic positioning via indexing pins Pendulum/shuttle operation (two work zones), which improves production cycle time. In addition to milling and drilling, it can also tap, saw, and perform profile machining – all with stationary clamped profiles. Please note: The information on this page has been obtained and compiled in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract, and we recommend that you verify all relevant details. Financial information VAT/margin: VAT: The price shown is exclusive of VAT (VAT is reclaimable for businesses).

Condition: used, maximum load weight: 22,580 kg, overall weight: 30,000 kg, axle configuration: 2 axles, first registration: 11/2022, next inspection (TÜV): 11/2026, loading space length: 11,025 mm, loading space width: 2,490 mm, loading space height: 2,725 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2022, Equipment: ABS, KÄSSBOHRER 2-axle city box semi-trailer with liftgate First registration 11/2022 German registration, first owner Dimensions (L x W x H): 11,025 x 2,490 x 2,725 mm Loading height: 2,675 mm Unladen weight: 7,420 kg Payload: 22,580 kg Fifth wheel height: 1,150 mm BPW axles with large disc brakes, 430 mm 2nd axle with forced steering system TRIDEC Tires: 4 x 385/55 R 22.5 with tread depth 10 mm ALCOA aluminum rims, Dura-Bright, high-gloss finish WABCO trailer EBS with RSS stability program Nedpfx Aozfxadod Sswh Air suspension with lift/lower function JOST crank fifth wheel, full load capacity Body: LaSi certificate, Code XL Steel front wall, KTL coated Side walls: Plywood Floor: 30 mm phenolic resin-bonded plywood, forklift axle load max. 7,200 kg Wear plate, steel, 600 mm at the rear Steel rear portal frame Doors: smooth design (fully foldable), with door latch, 4 double-hinge hinges per door leaf and 2 recessed swivel bar locks made of stainless steel White roof made of GRP with 4 integrated LED lamps 2 LaSi rails, right and left, mounted on the side walls Underride guard with DHOLLANDIA DHSMR30 liftgate, lifting capacity 2,500 kg, loading platform length 1,700 mm, with 2 roll stops BDL lock RENTING is the new BUYING; with us, it is also immediately available as a full-service rental.

Condition: used, mileage: 541,500 km, first registration: 12/2021, overall weight: 18,000 kg, axle configuration: 2 axles, emission class: euro6, Equipment: air conditioning, Automatic climate control + stationary air conditioning, red color, Euro 6 engine. STANDARD SPECIFICATION Passenger seat: Basic Adaptive Cruise Control with FCW and AEBS-3 Lane Departure Warning System Front axle: 8.00 t, parabolic springs, 163N Rear axle: 13.00 t, air suspension, SR1344 Goodyear RR, not applicable Emissions class Euro 6 Automated transmission, TraXon, 12-speed Standard component layout AdBlue® tank 90 l, located at the left fender DAF Connect Cab with air suspension Exterior sun visor, 'green transparent' Skylights Central locking, 3 keys, 2 remote controllers Fixed roof spoiler for Super Space Cab Side fenders Side fairing Headlamp housings and bumper: cab color Lower closure, cab side and fender in cab color Air intake, handle, and mirror housings in black Roof spoiler in cab color Side fenders in cab color Side skirts in cab color Steering wheel, leather, black color Driver’s seat: Luxury Air Armrest on passenger seat Coolbox or refrigerator Preparation for air pressure device Lower bunk with 65-liter drawer Upper bunk Curtains with partition curtain Roller blind on passenger side Roof hatch prepared for stationary air conditioning Accessory power supply: Standard + 2x 40 A Digital tachograph, VDO 1C Cruise control speed limit setting: 85 km/h Navigation preparation Truck navigation radio, 6 speakers Truck phone Antennae: AM/FM, 2x mobile, GNSS Extra: CB Predictive Cruise Control DAF Night Lock Turn assist R1, 315/70R22.5 GO KMAXD2 154/150 L Traction CBA MX-13 engine, 355 kW / 483 hp Cab badge: 480 Rear axle ratio 2.21 OBD, Euro VI Step D ZF Intarder Wheelbase 3.80 m / rear overhang 0.99 m Batteries in the rear overhang, no spare wheel carrier Aluminum fuel tanks 845 + 430 l, entry step, height 620 mm Fuel tanks on both sides JOST JSK37C, cast iron, 150 + 26 mm Electrical connector for trailer: 24V/2x7 pin cable: 2x7 > 15-pin + EBS Analog body signals and warnings Chassis with analog interface for engine speed control First transmission PTO NH/4c-R-32/25 Alternator 80 A, batteries 2 x 210 Ah AGM Battery energy monitoring Max. permissible gross train weight driven axle: 44,000 kg, class 2 Splash guard Extended maintenance interval Standard tool kit Standard fuel quantity + 30 liters, total tank capacity 1275 l, refrigerator Nsdpfxoylgbkj Ad Sswh

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 62 h, load capacity: 3,000 kg, lifting height: 5,520 mm, free lift: 1,236 mm, fuel type: diesel, mast type: triplex, construction height: 2,460 mm, fork carriage width: 1,040 mm, fork length: 1,200 mm, total length: 2,800 mm, drive type: Diesel, construction width: 1,340 mm, Diesel forklift Njdpfxsy Up T Ne Ad Sjwh Mast type: Triplex Technical condition: good Front tire type: Superelastic Rear tire type: Superelastic Fork width: 1035 mm; Windshield wiper; Jump start connection; Raised exhaust; Attached side shifter (width: 1040 mm); Double hose routing; Bluetooth radio with USB port; Driver's seat with synthetic leather upholstery (fully suspended); Two front headlights (mounted on the overhead guard) (LED); Rear combination light (LED); Yellow turn signal light (LED); Audible reversing alarm.

Condition: used, functionality: fully functional, load capacity: 2,000 kg, lifting height: 4,780 mm, free lift: 1,497 mm, fuel type: electric, mast type: triplex, construction height: 2,105 mm, fork carriage width: 940 mm, fork length: 1,220 mm, drive type: Elektro, Electric 4-wheel forklift Mast type: Triplex Technical condition: New Nwedpfoyw Dkzex Ad Soh Front tire type: Superelastic Rear tire type: Superelastic Battery voltage: 48V Battery capacity: 280Ah Battery year of manufacture: 2026 Battery condition: New - Attached side shifter - Panoramic mirror - Hose routing: Single - Rear combination light, LED - Front turn signal, LED Standard equipment: - Storage compartment - Steering wheel button - Seat switch - WITHOUT load guard - Two front headlights - Blue Safety light - Audible reversing alarm - Cabin - Level 3a - Partial cabin with steel protective roof, front and rear windshield, PVC side panels Delivery time: 22 weeks

Condition: used, load capacity: 1,600 kg, free lift: 1,497 mm, fuel type: electric, mast type: triplex, construction height: 2,105 mm, fork carriage width: 940 mm, fork length: 1,220 mm, drive type: Elektro, Electric 4-wheel forklift Mast type: Triplex Front tire type: Superelastic Rear tire type: Superelastic Battery voltage: 48V Battery capacity: 460Ah Battery manufacturer: Eternity Battery year of manufacture: 2026 Battery condition: New Nodoy Haprepfx Ad Sswh Load guard: WxH 940 mm x 1220 mm Hose routing: double; storage compartment; steering wheel button; seat switch; weather protection/steel protection canopy and windshield; two front headlights; rear combination light; acoustic reversing alarm; blue LED spotlight when reversing; front turn signals; socket wrench; availability: in 22 weeks

Condition: used, mileage: 68,000 km, power: 140 kW (190.35 HP), first registration: 10/2023, fuel type: diesel, next inspection (TÜV): 10/2026, color: grey, gearing type: automatic, emission class: euro6, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), immobilizer system, navigation system, second-hand vehicle warranty, soot filter, Special equipment: Driving assistance system: Driving Assistant, vehicle without model designation, lumbar support front left seat, electrically adjustable, metallic paint, tire repair kit (Mobility Pack), front seat heating, sun protection glazing (rear tinted) Njdpfx Adsy Rv Dyo Sewh Additional equipment: Storage package, passenger airbag deactivatable, driver and passenger airbags, equipment package: Connected Professional, exterior: High-gloss Shadow Line, electrically adjustable and heated exterior mirrors, exterior mirrors in body color, BMW Live Cockpit Plus, onboard computer, brake assistant, DAB tuner (digital radio reception), roof rails in body color, wheel theft protection (wheel locks), through-loading system (rear center armrest), dynamic brake light, Dynamic Stability Control (DSC) with extended scope, Dynamic Traction Control (DTC), first aid kit, driver assistance system: Active Guard Plus (lane keeping assistant, front collision warning), driver assistance system: attentiveness assistant, driving experience switch, remote trunk release, velour floor mats, front footwell lighting, luggage compartment lighting, rear LED tail lights, interior: trim strips quartz silver matt textured, Isofix mounts for child seat, body: 4-door, 3-zone automatic climate control with automatic recirculation, rear head airbag system, front head airbag system, rear head restraints foldable, steering wheel (sport/leather) with multifunction, light alloy wheels, mild hybrid 140 kW (engine 2.0 L - 140 kW diesel), model update, Park Distance Control (PDC) front and rear, electric parking brake, tire pressure monitoring system, low emission according to Euro 6d emission standard, LED headlights, rear side airbags, front side airbags, seat upholstery: Hevelius fabric, mirror package, start/stop system (function), warning triangle, tinted heat protection glazing, front seat heating.