Used Gto 46 for sale (3,278)

Condition: used, Pastochef Range Electrical power Power supply 400 V / 50 Hz / 3 phases Rated power 2 kW Fuse 10 A Crème Excellent: 6 to 15 kg per cycle Bavarian cream: 7 to 17 kg per cycle Fruit jam: 6 to 12 kg per cycle Chocolate tempering: 5 to 15 kg per cycle Ganache cream: 3 to 15 kg per cycle Choux pastry: 6 to 15 kg per cycle 46 dedicated programs and 5 free programs Dry bain-marie for heating and cooling Variable speed via inverter Display guiding through steps and temperatures Removable paddle and agitator scrapers Double lid with large hopper 3-position tap with double safety 4-position stainless steel shelf Management of power and water outages Rounded safety corners Cleaning by heating the cylinder Ksdpfxjzx Un Rj Ah Eodt Drying program after washing Dimensions 450 × 614 × 1110 mm Net weight 150 kg Air condenser available at extra cost Multifunction cooking machine Pastochef 18 RTL-I – up to 17 kg per cycle General description The Pastochef 18 RTL-I is a professional, multifunction cooking machine designed to automate numerous preparations in pastry, chocolate, ice cream, and gastronomy. It combines cooking, cooling, mixing, pasteurization, and preservation according to the selected programs. Each cycle guides the operator through the various steps, displaying temperatures and providing instructions for the gradual introduction of ingredients. Its capacity depends directly on the recipe being used, for example, 6 to 15 kg of Crème Excellent and up to 17 kg of Bavarian cream per cycle. What sets this model apart The Pastochef 18 RTL-I uses a dry bain-marie heating and cooling system, developed to limit the formation of deposits on the cylinder surfaces and maintain a consistent heat exchange. The inverter allows the stirring speed to be adapted to the preparation. The scrapers and removable paddle generate a vertical and horizontal helical movement to promote thorough mixing during the process. The machine has 18 pastry programs, 9 chocolate programs, 8 specialty programs, 7 gastronomy programs, 4 ice cream programs, and 5 free programs for recording custom cycles.

Condition: good (used), functionality: fully functional, fuel type: diesel, overall weight: 15,400 kg, lifting height: 3,150 mm, shovel volume: 0.5 m³, digging bucket width: 2,500 mm, Year of construction: 1995, operating hours: 14,000 h, machine/vehicle number: 3671199, Equipment: cabin, Liebherr A900 Excavator Serial No.: 3671199 Year: 1995 Ksdpfx Aewcyhyeh Esdt Hours: ~14000 Weight 15.4 t Standard tires 10.00-20 Bucket capacity 0.5 m³ Stabilizers 2 2/4-fach Transport length 7.85 m Transport width 2.5 m Transport height 3.15 m Model series A Engine manufacturer Deutz Engine type BF4M1013E

Condition: good (used), Year of construction: 2005, operating hours: 15,938 h, functionality: fully functional, Escomatic New Mac 646 + Kdjdpfxjzx Huce Ah Est Year 2005 6 axes 15938 run time hours 4x chuck tools 1 x Cross drill station 3 x Frontal drill stations 1 x Pick up spindle for back burring 3 x Frontal driven back burring stations 2 x radial driven back burring stations 1 x Support of steel bobin 1 x Oil tank 1 x Arm support for coollant on main spindle Machine in good running condition

Condition: excellent (used), Year of construction: 2013, PROD. KAESER TYPE TH371 S/N 1002 YEAR 2013 POWER (kW) 4.3 CAPACITY (m3/min) 32 PRESSURE (bar) 16 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER BUILT-IN DRYER R404a 14kg HEAT EXCHANGER COOLED (AIR/WATER) ON TANK DOCUMENTS Kdjdpfx Aezu Rvcsh Eot CONNECTION NEW/USED USED

Condition: excellent (used), Year of construction: 2014, PROD. ATLASCOPCO TYPE GA75 FF PLUS S/N API619181 YEAR 2014 POWER (kW) 75 CAPACITY (m3/min) 14.95 DISCHARGE PRESSURE (bar) 7.25 HOURS (RUNNING/TOTAL) Kedpfx Ahozicyps Ejdt FREQUENCY CONVERTER no BUILT-IN DRYER yes, R410a 1.1 kg HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 2 1/2 NEW/USED USED

Condition: excellent (used), Year of construction: 2013, PROD. KAESER Kedpfx Aszu Inpsh Esdt TYPE DSD202SFC S/N 1937 YEAR 2013 POWER (kW) 110 CAPACITY (m3/min) 4-17.3 PRESSURE (bar) 10 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER no BUILT-IN DRYER no HEAT EXCHANGER yes COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTIONS 2 NEW/USED USED

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, 1x Professional high-volume shredder from Ideal, model: 4606 CC, security level: P-5 - with oiler. Used only a few times! Ksdszz R E Depfx Ah Ejdt In very good, fully functional condition, manufactured in 2024. Price quoted net, plus VAT. Shipping possible upon request, subject to an additional charge.

Condition: excellent (used), Year of construction: 2001, PROD. ATLASCOPCO TYPE GA160 S/N AIF072890 YEAR 2001 POWER (kW) 167 CAPACITY (m3/min) 21 PRESSURE (bar) 8.5 HOURS (SERVICE/TOTAL) FREQUENCY CONVERTER no BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no Kdedpfx Ahezq Afuo Est DOCUMENTS no CONNECTIONS 3 NEW/USED USED

Condition: refurbished (used), Year of construction: 2016, machine/vehicle number: R-00672, load capacity: 60 kg, arm reach: 2,050 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, Refurbished ABB IRB 4600-60/2.05 manufactured in 2016.05. The robot comes with an IRC5 controller including Flexpendant DSQC679. Kdodpfxjz Af R Do Ah Est   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Model: IRB 4600-60/2.05 Model Number: IRB Year of Manufacture Robot: 2016.05 Warranty term (months): 12   Payload (kg): 60 Reach (mm): 2050 Repeatability (mm): ± 0.05 Controlled Axes: 6-axis Installation Type: Floor, Upside-down Mount Weight (kg): 425   Controller: IRC5 Year of Manufacture Cabinet: 2016.05 RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15

Condition: excellent (used), Year of construction: 2013, S016958 PROD. KAESER TYPE TH371 S/N 1003 YEAR 2013 POWER (kW) 4.3 CAPACITY (m3/min) 32 PRESSURE (bar) 16 HOURS (RUNNING/TOTAL) XXXXX FREQUENCY CONVERTER XXXXX BUILT-IN DRYER R404a 14kg EXCHANGER COOLED (AIR/WATER) ON THE TANK Kdsdpfxszwc U Ns Ah Eet DOCUMENTS CONNECTION NEW/USED USED

Year of construction: 2004, condition: ready for operation (used), - USED - 3-AXIS CNC LATHE MAX ROTATING DIAMETER: 730 mm MAX TURNING LENGTH: 1750 mm MAX TURNING DIAMETER: 528 mm BAR CAPACITY: 110 mm SPINDLE: 1500 rpm; 30 - 37 kW; ASA A2-11 ; 530 mm X-AXIS TRAVEL: 156 + 251 mm Z-AXIS TRAVEL: 1650 mm GEAR BOX: 4-STEPS RAPID FEEDS X-Z: 12 - 15 m/min DRIVEN TURRET HEAD: 12 (6 DRIVEN TOOLS) POS; 2500 rpm; 5,2 kW HIGH PRESSURE COOLANT: 4 BAR CONTROL UNIT: FANUC 0i-TB WEIGHT: 13500 Kg Kdedpsxymcvjfx Ah Ejt OVERALL DIMENSIONS: 6210 x 2980 x 2515 mm ACCESSORIES: SWARF CONVEYOR

Condition: used, Year of construction: 2011, functionality: fully functional, total length: 8,310 mm, total width: 1,641 mm, total height: 1,824 mm, overall weight: 2,100 kg, input voltage: 400 V, track width: 660 mm, type of input current: three-phase, power: 5.3 kW (7.21 HP), pressure: 1 bar, number of injections: 6, temperature: 300 °C, Title for MachineSeeker AFO Heat AFOGRILL-6B-600 industrial gas-fired infrared grill – 2011 Sales Description For sale: AFO Heat AFOGRILL-6B-600, an industrial gas-fired infrared grill for the continuous grilling, browning, and heating of food products. The machine is equipped with 6 infrared gas burners, each with a thermal output of 46 kW. The total installed thermal output is therefore 276 kW. This grill is suitable for industrial food production and can be used, among other things, for meat products, hamburgers, chicken products, kebabs, and similar products. Technical Specifications Manufacturer: AFO Heat NV Model/Type: AFOGRILL-6B-600 Year of Manufacture: 2011 Serial Number: K015 Number of Burners: 6 Thermal Output: 6 × 46 kW Total Thermal Output: 276 kW Electrical Power: 5.3 kW Kjdpfszn Ht Dex Ah Eodt Supply Voltage: 3 × 400 V + N + PE Required Gas Pressure: 20 to 100 mbar Machine Weight: approximately 2,100 kg Construction: stainless steel CE Marking: present The AFOGRILL is designed for professional and industrial applications where uniform and powerful heat treatment is necessary. Thanks to the infrared gas technology, the product can be grilled quickly and given an attractive color and grill pattern. Dimensions, belt speed, capacity, type of gas used, and other information are available upon request. Short version AFO Heat AFOGRILL-6B-600 industrial infrared gas grill, year of manufacture 2011. Equipped with 6 burners, each with 46 kW, for a total thermal output of 276 kW. Electrical power 5.3 kW, connection 3 × 400 V + N + PE, gas pressure 20–100 mbar, and weight approximately 2,100 kg. Stainless steel construction with CE marking. Suitable for the continuous grilling and browning of meat, chicken, and other food products.

Condition: ready for operation (used), Year of construction: 2003, Baling press Hsm 500.2 vl Fourfold wire tying of bales Bale dimensions (L x W x H, mm): 1200 x 800 x 1000 - 1200 Bale weight (kg): approx. 500 kg Technical data (L x W x H, mm): 1213 x 1824 x 2987 Filling opening (mm): 1200 x 565 Cycle time (sec): 35 Pressing force (T): 54 Power supply (V): 400 (three-phase) Vertical baler Hsm V press 500.2 VL Kedpfx Ajra Ak Esh Esdt Year of manufacture: 2004-2008 Price: 3,500 EUR Transport height: 2600 mm

Condition: used, Year of construction: 2015, functionality: fully functional, type of input current: three-phase, overall weight: 200 kg, input voltage: 400 V, filter area: 15 m², suction capacity: 1,100 m³/h, negative pressure: 3,200 Pa, input frequency: 50 Hz, hose length: 3,000 mm, Welding fume extractor, dust collector, self-cleaning filter, pneumatic, vacuum KEMPER. For welding, grinding, and all types of dry dust. Self-cleaning welding fume filter with non-polluting dust collection. The mobile cartridge filter KEMPER MaxiFil Clean is designed for continuous operation to filter welding fumes and dust with high concentrations. Suitable for use in welding carbon steels, low-alloy steels, high-alloy steels, and aluminum using any welding method. Kdodpezdqv Uefx Ah Est Economical in operation due to the long service life of the filter cartridge. Parameters: Capacity - 1100 m3/h Maximum vacuum - 3200 Pa Three-phase fan with a power of 1.5 kW Filtration area - 15 m2 Year of manufacture - 2015 Patron filter cartridge with PTFE membrane Filtration efficiency - > 99.97% Built-in delay timer in start-stop mode. When connected to a start-stop sensor (optional), the delay time for fume extraction after the welding process is completed can be set to a value of 5-60 seconds. Stock number - 1145

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 2018/219, hole diameter: 75 mm, number of planer blades: 6, operating speed: 6 mm/s, year of last overhaul: 2018, For sale is a very fast and complete Cambio debarking system! In 2018, the machine was completely overhauled, and since then, it has been professionally maintained and equipped with a new knife ring with 6 cutting knives! The system can be directly integrated into your existing mechanization! TECHNICAL DETAILS Maximum log diameter: Ø 750 mm Minimum log diameter: 11 cm Shortest log length without an additional feed system: 3 m Shortest log length with an additional feed system: 1.5 m Maximum feed speed: 100 m/min MACHINE DETAILS Ksdpfx Ahezx Eaqo Eodt Rotor motor: 55 kW Feed motor: 11 kW Hydraulic power: 1.5 kW Rotor speed: 220 rpm at 50 Hz Rotor opening: 80 cm Debarking rotor: 6-knife rotor Weight: 10,500 kg EQUIPMENT Complete infeed system Complete outfeed system Electrical system Hydraulics for the infeed rollers New 6-knife rotor from the 2018 overhaul Complete debarking system for integration into an existing mechanization Centering device ZV – 75/2 MA Number of horizontal conical rollers: 2 Drive power per SEW worm gear motor: 1.5 kW EQUIPMENT 2 horizontal conical rollers mounted in pneumatically actuated swivel arms SEW worm gear motors with torque supports in a solid steel design Heavy-duty inlet hopper Complete sensor system Outfeed system AW 800 Drive power: 3.0 kW EQUIPMENT Drive via SEW spur gear motor Machine frame made of welded rectangular tubes for supporting additional machine components Hydraulic shock absorbers

Condition: new, PROD. ATLASCOPCO TYPE G11FF S/N ITJ1078585 YEAR 2026 Ksdpfx Ahez Dique Eedt POWER (kW) 11 CAPACITY (m3/min) 1.51 PRESSURE (bar) 9.75 HOURS (RUNNING/TOTAL) 0 INVERTER no BUILT-IN DRYER yes, R513a 0.5kg HEAT EXCHANGER no COOLED BY (AIR/WATER) air WITH TANK yes, 500 L DOCUMENTS yes CONNECTION 1 NEW/USED NEW

Condition: refurbished (used), Year of construction: 2016, machine/vehicle number: R-00694, load capacity: 40 kg, arm reach: 2,550 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, Refurbished ABB IRB 4600-40/2.55 manufactured in 2016.07. The robot comes with an IRC5 controller including Flexpendant DSQC679.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Model: IRB 4600-40/2.55 Model Number: IRB Year of Manufacture Robot: 2016.07 Warranty term (months): 12   Payload (kg): 40 Reach (mm): 2550 Kdsdpfoz Daf Njx Ah Ejt Repeatability (mm): ± 0.05 Controlled Axes: 6-axis Installation Type: Floor, Upside-down Mount Weight (kg): 425   Controller: IRC5 Year of Manufacture Cabinet: 2016.05 RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15

Condition: ready for operation (used), Year of construction: 2017, load capacity: 40 kg, arm reach: 2,550 mm, number of axes: 6, This 6-axis ABB IRB 4600-40/2.55 was manufactured in 2017. It features a payload capacity of 40 kg and a maximum reach of 2,550 mm. With a net weight of 435 kg, this robot arm is designed for versatile applications. If you are looking to get high-quality automation capabilities, consider the ABB IRB 4600-40/2.55 robot arm we have for sale. Contact us for further details. • 3x units available • Payload: 40 kg • Reach: 2.55 m • Armload: 20 kg • Protection Rating: Standard (IP67) • Net Weight (Mechanical Unit): 435 kg (Nameplate) / 465 kg (Data Sheet) • Number of Axes: 6 + 3 external (up to 36 with MultiMove) • Mounting Position: Floor, shelf, inverted or tilted Kdedpfx Ahoz Aqdpe Est • Controller: Robot Cabinet ROBOT 300R3 / OmniCore V250XT, V400XT • Axis 1 Rotation Working Range: +180° to -180° • Axis 1 Max Speed: 175°/s • Axis 2 Arm Working Range: +150° to -90° • Axis 2 Max Speed: 175°/s • Axis 3 Arm Working Range: +75° to -180° • Axis 3 Max Speed: 175°/s • Axis 4 Wrist Working Range: +400° to -400° • Axis 4 Max Speed: 250°/s • Axis 5 Bend Working Range: +120° to -125° • Axis 5 Max Speed: 250°/s • Axis 6 Turn Working Range: +400° to -400° • Axis 6 Max Speed: 360°/s • Position Repeatability: 0.06 mm • Path Repeatability: 0.28 mm • Robot Base Dimensions: 512 x 676 mm • Robot Height: 1922 mm • Supply Voltage: 200-600 V, 50-60 Hz • Operating Ambient Temperature: +5°C (41°F) to +45°C (113°F)

Condition: used, Year of construction: 1995, Approx. 33.2 million prints Format: 360×520 mm (14×20″) Ksdpfxszau Uno Ah Ejdt Varn Kompac III dampening unit Singel-sheet feeder Plus version Powder sprayer Available: at short notice

Condition: used, Year of construction: 2016, operating hours: 1,171 h, functionality: fully functional, load capacity: 60 kg, arm reach: 2,050 mm, controller manufacturer: ABB, controller model: IRC5, teach pendant manufacturer: ABB, teach pendant model: FlexPendant, ABB IRB 4600-60/2.05 – 6-axis industrial robot with IRC5 controller and FlexPendant The ABB IRB 4600-60/2.05 industrial robot is designed for demanding production applications and process automation. Its 60 kg payload capacity and 2050 mm reach provide high dynamic performance, high rigidity, and excellent positioning accuracy. The offered set comes from the research and development (R&D) department and includes a complete system ready for integration. The robot is ideal for applications such as: - CNC machine tending, - transferring and manipulating parts, - assembly, - packaging, - palletizing, - vision systems, - grinding and surface finishing, - R&D workstations. The set includes: - ABB IRB 4600-60/2.05 robot, - ABB IRC5 controller, - ABB FlexPendant operator panel, - complete set of robot cables. The robot has the following licenses: Advanced Robot Motion, Kedpfx Aszkbpfoh Ejdt Absolute Accuracy, PROFINET Controller/Device, World Zones, Independent Axis, Path Recovery, Path Offset, Collision Detection, PC Interface, FlexPendant Interface, Multitasking, Sensor Interface, UDPUC Driver, Externally Guided Motion (EGM). Technical condition The robot starts up correctly and communicates with the IRC5 controller. The operator panel displays message 38200 – Battery backup lost. This indicates a loss of power to the battery that supports the encoders (SMB Battery). This is a typical message after the battery has been discharged or disconnected and does not indicate a defect in the robot. After replacing the battery, a calibration/axis synchronization procedure will be necessary. Duty Time Counter: 1171 h Specification Manufacturer: ABB Model: IRB 4600-60/2.05 Year of manufacture: 2016 Payload: 60 kg Reach: 2050 mm Number of axes: 6 Controller: IRC5 Operator panel: ABB FlexPendant RobotWare: 6.08.00.01 Condition: used We provide a start-up guarantee.

Condition: excellent (used), Year of construction: 2014, S016896 PROD. ATLAS COPCO TYPE GA75VSDFF S/N API668061 YEAR 2014 POWER (kW) 75 CAPACITY (m3/min) 15.09 DISCHARGE PRESSURE (bar) 12.75 HOURS (SERVICE/TOTAL) FREQUENCY CONVERTER yes BUILT-IN DRYER yes, R410a 1.1kg HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no Kdjdpfxozi Dbho Ah Est NEW/USED USED

Condition: used, mileage: 742,746 km, power: 320 kW (435.08 HP), first registration: 03/2016, fuel type: diesel, number of seats: 46, gearing type: automatic, next inspection (TÜV): 01/2027, emission class: euro6, color: gold, brakes: retarder, Year of construction: 2016, Equipment: ABS, air conditioning, bathroom, parking heater,

Condition: good (used), Year of construction: 2013, TX8i-s / WinFlexIPS Bar diameter up to Ø 32 mm Design allows for conversion between long and short turning Controlled axes: 9 Tool holder WRV on top, X/Y/Z dual drive Counter spindle with WRV on the bottom, separate drive Rear unit with drive Rated voltage 400 V, 3~, N, PE · 50 Hz Connection power 28 kVA, pre-fuse 63 A Recommended supply line: 16 mm² up to 30 m, otherwise 25 mm² Total drive power 46 kW · 73 A Compressed air requirement approx. 300 Nl/min Machine weight 6,850 kg Dimensions L × W × H 3,870 × 1,670 × 2,500 mm Safety standard EN ISO 23125, design type 3 small - Coolant lubrication with cutting oil — internal feed 30 bar, medium pressure 20 bar, high-pressure internal cooling 80–120 bar with its own pump - Coolant treatment system with strip filter (ELBARON) - Mist extraction and fume separator - Fire protection and extinguishing system — prerequisite for unmanned shifts with oil - Workpiece removal with linear unit (part gripper) - Incl. various clamping jaws - Linear measuring system in the X-axes - TRAUB tool monitoring and WinFlexIPS programming - Bar loader FMB turbo 3-36 for bars up to 3,200 mm, with synchronous and displacement device - Chip conveyor, hinged belt - Color: Dust gray RAL 7037 Machine operating time approx. 30,600 hours Machine price without the shown accessories (extensive accessories can be purchased separately) Ksdpfx Aezzahzsh Eedt Errors and prior sale excepted. The machine can be inspected under power with short notice.

Year of construction: 2002, condition: used, functionality: fully functional, For sale are 2 used dispensing/roller conveying systems from the manufacturer Springer. These high-performance systems are designed for a maximum material length of up to 6 meters and achieve a throughput of up to 120 cycles per minute. Ideal for efficient and precise dispensing of wood or other materials in high-volume production. The dispensing systems are ready for use (disassembled). Price upon request. Kdjdezudzlopfx Ah Eot

Year of construction: 2002, condition: used, functionality: fully functional, For sale is a high-performance end trimmer from the manufacturer Springer, equipped with 14 oscillating saws. The system is designed for a maximum material length of up to 6 meters and operates at high speeds with a cycle rate of up to 120 cycles per minute. Ideal for sawmills and the woodworking industry for precise and rapid length optimization. Price upon request. Kdedpfxszud Dgo Ah Eot