Used Grundfos Pumps for sale (64)

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI Kedpfeyug R Rjx Ahveww controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: ready for operation (used), Centrifugal Pump, Pump, Grundfos 4 kW, Used Machine Manufacturer: Grundfos Type: CR 10-12 A-A-A-V-HQQV Overall Dimensions: Length: 255 mm Kwsdpfev Dr Icox Ahvsw Width: 240 mm Height: 1040 mm Flow Rate: 10 m³/h Head: 96.7-122 m Year of Manufacture: 2020 Electrical Data: 400V; 4 kW; 7.9 A

Condition: new, functionality: fully functional, machine/vehicle number: CR1-10 AAAE-HQQE, pump pressure: 16 bar, Grundfos CR1-10 AAAE-HQQE Vertical Multistage Centrifugal Pump Model: A96516180P10544 Serial No.: 0001 Power: 0.55 kW Pmax/Tmax: 16 bar / 120°C This is a high-performance vertical multistage centrifugal pump with inline inlet and outlet ports for easy integration. The pump head and base are constructed from durable cast iron, while all wetted parts are made from corrosion-resistant stainless steel. Key Features: According to Grundfos Product Center and Lenntech, the specific configuration codes for this model indicate the following: Design Type (CR1-10): "CR" denotes the standard vertical multistage range; "1" indicates a nominal flow rate of 1 m³/h (rated at 1.8 m³/h in some 50Hz configurations); "10" refers to the number of stages (impellers) inside the pump. Kwsdpfowtd Hnjx Ahvew Construction Materials (A-A-A): The first "A" signifies the basic pump version; the second "A" indicates a pipe connection via oval flanges with internal Rp threads; and the third "A" confirms the materials used—cast iron for the pump head and base, with all wetted parts (impellers and chambers) made of stainless steel. Rubber Components (E): This code stands for EPDM, the material used for the O-rings and gaskets. Shaft Seal (HQQE): This is a balanced cartridge shaft seal. H: Cartridge type. QQ: Silicon carbide seal faces. E: EPDM rubber parts. ENVIEQ ENVIEQ +4 Reliable cartridge shaft seal for safe handling and easy maintenance Rigid split coupling for efficient power transmission Pipe connection via oval flanges with internal Rp threads Fitted with a 3-phase, fan-cooled asynchronous motor The steel, cast iron, and aluminum components are coated using a high-quality epoxy-based cathodic electro-deposition (CED) process. This ensures a thin, uniform protective layer that enhances corrosion resistance and surface durability. Rated Flow & Head: Typically offers a rated flow of 1.8 m³/h and a rated head of approximately 47.1 meters. Motor: Usually fitted with a 0.55 kW, 3-phase asynchronous motor. Temperature Range: Suitable for liquid temperatures ranging from -20 °C to +120 °C. Applications: Commonly used in HVAC systems (heating and air conditioning), water treatment (reverse osmosis), and irrigation. Ready for use in demanding industrial or commercial systems. The pump is not used.

Condition: good (used), Item: D-1903-Grundfos pump CR8-30 Kwedpjirfblsfx Ahvsw Water pump, Grundfos, used! Type P2-140 K Capacity 2.000 l, 90 m. 1,1 kW

Condition: new, Year of construction: 2022, functionality: fully functional, NEW Grundfos Pump CRN 10-12 A-FGJ-G-E-HQQE | Stainless Steel AISI 316 | 4 kW Condition: Brand new, never used. Model: CRN 10-12 A-FGJ-G-E-HQQE Ksdox Im Ahspfx Ahvoww Manufacturer: Grundfos (Leading pump solutions provider) DEVICE DESCRIPTION The item for sale is a high-performance, vertical multistage centrifugal pump from the CRN series. This is a version made entirely from acid-resistant stainless steel (AISI 316), setting it apart from the standard cast iron models (CR). It is designed for operation in the most demanding industrial conditions, ensuring reliability when handling aggressive and demanding liquids. The pump is an ideal solution for businesses seeking a high-efficiency device, ready for immediate installation in water treatment systems, technological processes, or high-pressure setups. _____ KEY TECHNICAL DATA • Rated flow: 10 m3/h • Rated head: approx. 96.7 m (max up to 122 m) • Motor power: 4 kW • Power supply: 3-phase • Rotational speed: 2900 rpm • Maximum operating pressure: 25 bar • Liquid temperature range: -20°C to +120°C • Number of impellers: 12 • Year of manufacture: 2022 CONSTRUCTION AND MATERIALS • Material configuration (G): All liquid-contacting parts are made from stainless steel EN 1.4401 / AISI 316 (providing maximum corrosion resistance). • Shaft seal (HQQE): Durable cartridge mechanical seal made from silicon carbide (SiC/SiC) with EPDM elastomers. Guarantees longevity and leak-tight operation even with hot water. • Connection (FGJ): Universal flanged system (DIN/ANSI/JIS), allowing easy adaptation in existing installations. _____ APPLICATIONS Thanks to its acid-resistant construction, the CRN pump is suitable for: 1. Chemical and pharmaceutical industries (pumping acids, alkalis, aggressive media). 2. Filtration and water treatment systems (reverse osmosis, ultrafiltration). 3. Industrial washing systems and CIP/SIP cleaning setups. 4. Process water installations in brewing, dairy, and food industry. _____ WHY BUY THIS PUMP? • Premium product: The CRN series is the “Mercedes” among vertical pumps. • Time-saving: Device is available immediately (no long lead times from the manufacturer). • No usage marks: The pump is brand new, properly stored, and ready to operate at full capacity. Important: Please verify that the electrical and hydraulic parameters match your project requirements before purchase.

Condition: ready for operation (used), Pump, Vertical Centrifugal Pump, Grundfos Manufacturer: Grundfos Model: CR4-220 A-F-A-AUUE Flow Rate: 6 m³/h Head: 140 m Pressure: 21 bar / 120 °C Ksdpfx Ahowmbuisvoww Electrical Data: 4 kW; 8–10 A; 400 V

Condition: new, For sale: new Grundfos CRN5-11 vertical multistage pump. The pump has never been used and comes from warehouse surplus. The equipment is in excellent condition, stored in its original packaging. Manufacturer's documentation included in the set. Grundfos CRN series pumps are designed for use in industrial and water installations. They are characterized by high performance, reliability, and excellent build quality. Technical data Manufacturer: Grundfos Model: CRN5-11 A-P-A-E-HQQE Kwodpfx Aeyubcnshvsw Motor power: 2.2 kW Frequency: 50 Hz Rotational speed: 2899 rpm Capacity: 5.8 m³/h Head: up to 56.5 m (max 76 m) Maximum pressure: 25 bar Maximum temperature: 120°C The pump is made of stainless steel, suitable for use in water installations, industrial systems, pressure systems, process installations, and water treatment systems. Condition: new, never used.

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs Kwjdpfx Aeyug Hxshvew • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Year of construction: 2011, condition: used, functionality: fully functional, A complete cooling water unit that was used for cooling screw compressors. 1x pump unit with machine frame consisting of: 3x Grundfos stainless steel centrifugal pump Type: CRN32-1-1 A-F-G-V-HQQV Flow rate per pump: 30 m³/h Delivery head: 10.7 meters (1.05 bar) Drive power: 1.5 kW Voltage / Frequency: 400 Volt / 50 Hertz 6x manual shut-off butterfly valves, stainless steel material 1x pressure relief valve 2x pressure transmitters 6x pressure gauges 2x plastic piping with bends, 140 x 8.3 mm Gerodur 1x heat exchanger unit with frame consisting of: 2x bolted plate heat exchangers Alfa Laval Kwodpeyrxuvofx Ahvew Type: M6-MFG Capacity: 11.2 liters Operating pressure max.: 10 bar Max. temperature: 80°C 6x manual shut-off butterfly valves, stainless steel 2x electric valves with Auma electric actuators with Harting plug connector 2x electric valves KSB with Auma actuator SAR 07.1-F10 and MATIC control head with Harting plug connector 2x PT 100 thermometers 2x PE pipes with bends 110 x 6.5 mm Gerodur 2x PE pipes with bends 90 x 5.4 mm Gerodur 1x expansion vessel

Condition: used, Vertical multistage high pressure centrifugal pump GRUNDFOS. Pump as good as new, but a part of the magnetic coupling has been dismantled. Type CRN 10-09 MP-FGJ GI-V Year of manufacture approx. 2012 Delivery capacity at 7,2 bar: max. 10 m3/h Delivery head: max. 91.8 meters Mains connection: 400 Volt, 50 Hz Ksdpfx Asfupadjhvoww Power: 3 kW - pump construction in 9 stages - made of stainless steel 1.4401 - the pump is as good as new, but there are several new pump chambers included - part of the magnetic coupling is missing suitable for drinking water supply, irrigation and drainage Packed in the original wooden box space requirement pump LxWxH 1100 x 250 x 300 mm Space requirement shipping box LxWxH 1400 x 330 x 340 mm Weight with shipping box 85 kg As good as new No submersible pump or submersible pump

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: A95109671P208220001 5, volume flow: 213 m³/h, operating pressure: 3 bar, final pressure: 4 bar, input voltage: 400 V, input frequency: 50 Hz, input current: 31 A, type of input current: AC, type of cooling: air, rotational speed (max.): 2,960 rpm, protection type (IP code): IP55, Used, completely overhauled pump in very good condition Kwedpfx Aheynxh Ijvsw

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: A98341216P215160001, volume flow: 213 m³/h, operating pressure: 3 bar, final pressure: 4 bar, input voltage: 400 V, input frequency: 50 Hz, input current: 31 A, type of input current: AC, type of cooling: air, rotational speed (max.): 2,955 rpm, protection type (IP code): IP55, Used, completely overhauled pump in very good condition Ksdpfx Ajynxhzehvoww

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: A95109671P208220003 5, volume flow: 213 m³/h, operating pressure: 3 bar, final pressure: 4 bar, input voltage: 400 V, input frequency: 50 Hz, input current: 31 A, type of input current: AC, type of cooling: air, rotational speed (max.): 2,960 rpm, protection type (IP code): IP55, Used, completely overhauled pump in very good condition Kwedoynxhnjpfx Ahvsw

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: A95109671Pxxx, volume flow: 213 m³/h, operating pressure: 3 bar, final pressure: 4 bar, input voltage: 400 V, input frequency: 50 Hz, input current: 31 A, type of input current: AC, type of cooling: air, rotational speed (max.): 2,960 rpm, protection type (IP code): IP55, Used, completely overhauled pump in very good condition Kedpfxoynxhho Ahvjww

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: A98341216P217330003, volume flow: 213 m³/h, operating pressure: 3 bar, final pressure: 4 bar, input voltage: 400 V, input frequency: 50 Hz, input current: 31 A, type of input current: AC, type of cooling: air, rotational speed (max.): 2,955 rpm, protection type (IP code): IP55, Used, completely overhauled pump in very good condition Kwsdpfxsynxg Re Ahvsw

Condition: new, functionality: fully functional, volume flow: 64 m³/h, power: 5.5 kW (7.48 HP), rotational speed (max.): 2,900 rpm, We offer this new Grundfos CR 64-1 centrifugal pump, never used, new on pallet. Q = 64 m³/h H = 21.1 m DN 100 suction and discharge 5.5 kW Kwsdpfxjynwy No Ahvsw If you have any questions or require more information, please feel free to send us a message or call us.

Condition: good (used), Item: D-1915 Grundfos Pump PUMP, GRUNDFOS Type TP-32-120/2 Kwjdpfxjppxy Ej Ahvow Bar/C - 10/90 Q - 9.0 m3/h H - 7.1 m n 2890 min Hz 50 More information at attached photos.

Condition: excellent (used), functionality: fully functional, power: 7.5 kW (10.20 HP), The pumps are suitable for supplying grinding oil for tool production. The pumps were in use up until recently on a central system. There are 2 units in stock. Kjdpfx Ahoylqbusveww

Condition: new, We are selling a new, unused Grundfos circulation pump, a German manufacturer. The pictures show the characteristics of the pump. As you can see in the pictures, the pump was unpacked-new. Contact us, we are ready for an agreement Kwjdpfx Aheupuqgevew

Condition: new, Grundfos CRN32-5-2 A-F-G-E-HQQE Vertical centrifugal pump CRN 32-5-2 A-F-A-E-HQQE Vertical, multistage centrifugal pump with opposing suction and discharge connections (inline design). The pump components in contact with the medium are made of high-quality stainless steel. The cartridge seal promises high reliability and ease of servicing. Power is transmitted via a rigid, split coupling. The pipe connection is made via combined DIN flanges. The pump is equipped with a 3-phase, fan-cooled asynchronous motor. Manufacturer: Grundfos Manufacturer Product Group: Vertical Centrifugal Pumps Manufacturer Product Group: Vertical Centrifugal Pumps CRN Centrifugal pump CRN Manufacturer article number: 96122358 Connection inlet side: Flange Connection outlet side: Flange Connection standard inlet side: EN 1092-2 Nominal diameter, connection outlet side: DN 65 Ksdpfx Aewbfigjhveww Design: Vertical Speed: 2924 min Motor output power: 11.0 kW Protection class: IP55 Max delivery head: 90.2 m Max working pressure: 16 bar Weight: 193.2 kg List price: 14,844.00 € Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items in other sizes - new and used - in our store! International shipping costs on request!

Condition: used, Grundfos CR 60 20 A-F-A-BBUE Model B500002P39447 16 bar max. 110 degrees Celsius Kwedpfx Asuif Iujhvow 60m3/hour 20.2m height n 2900 rpm The offer is aimed exclusively at traders within the meaning of §14 BGB (German Civil Code) No sale to private individuals

Condition: used, Q 33.0 m³/h Kwodpfjikwapex Ahvsw P 15,0 kW max. 20 bar max. 110 C° H 90.0 m Nr. 4932869340 232 kg

Condition: excellent (used), Grundfos TPED 50-160 / 2-S AFA-BAQE APPLICATION AREAS - Heating systems - Local hot water supply systems - cooling and air conditioning systems FEATURES AND ADVANTAGES - Low power consumption - Correction according to the existing working conditions - Easy to install Technical data: Frequency of rotation 2900 rpm Nominal supply 17 m 3 / h Ksdpfx Aofuappjhvsww Nominal head 12 m Max hydrostatic head 160 dm Shaft seal BAQE liquids: Working fluid water Fluid temperature range 0 ... 120 ° C temperament. Liquids 20 ° C density 998,2 kg / m 3 materials: Pump housing cast iron EN-JL1040 ASTM A48-40 B Impeller cast iron EN-JL1030 ASTM A48-30 B Electrical data: Motor type 80B Number of poles 2 Nominal power - P2 2 x 1.1 kW Industrial frequency 50 Hz Nominal voltage 3 x 380-500 V Rated current 2.15-1.80 A Cos is a force characteristic 0.91-0.82 Nominal speed 360-4000 rpm Energy efficiency 88.5% Protection class (IEC 34-5) IP55 Insulation class (IEC 85) F Motor protection Yes. Engine number 98362352 assembly: Maximum ambient temperature 50 ° C Max. working pressure 16 bar Max. Pressure at a given temperature 16 bar / 120 ° C Standard flange DIN Connection code F Pipe connection DN 50 Permissible pressure PN 16 Mounting length 340 mm mm Motor flange size FF165 Net weight 95 kg

Condition: excellent (used), Pressure centrifugal pump Vertical centrifugal pump Grundfos CR 90-3 A-F-A-E-EUBE more piece Vertical, multistage centrifugal pump with suction and discharge ports on the same level. The pump head and base are in cast iron - all other wetted parts are in stainless steel (EN 1.4301) Rated flow 90 m³/h Rated head 65.5 m Max pressure at stated temp 16 bar / 120 °C Type of connection DIN Size of inlet connection DN 100 Pumped liquid Water Liquid temperature range 0 .. 120 °C Selected liquid temperature 20 °C Density 998.2 kg/m³ Electrical data Motor type SIEMENS Rated power - P2 22 kW 2940 rpm Mains frequency 50 Hz Rated voltage 3 x 380-415D/660-690Y V Rated current 41,5-39,5/24,0-23,5 A Cos phi - power factor 0.86 Rated speed 2945 rpm Number of poles 2 Enclosure class (IEC 34-5) IP55 Kwjdshy Nx Eopfx Ahvsw

Condition: excellent (used), functionality: fully functional, volume flow: 163 m³/h, input frequency: 50 Hz, NB 80-160/147-127 A-F2-A-E-BAQE Non-self-priming, single-stage centrifugal spiral pump Pumped liquid: water Liquid temperature range: 0 .. 120 °C Density: 998.2 kg/m³ Technical: Speed: 2940 rpm Kjdpferp Ef Ejx Ahveww Nominal volume flow: 163 m³/h Nominal head height: 17.1 m Actual diameter of the impeller: 147-127 mm Nominal diameter of the impeller: 160 mm Primary shaft seal: BAQE Maximum ambient temperature: 60 °C Maximum operating pressure: 16 bar Flange standard: EN 1092-2 Pump inlet: DN 100 Pump outlet: DN 80 Pressure limit: PN 16 Nominal power 11 kW Mains frequency: 50 Hz Nominal voltage: 380V 3 phases Nominal current: 20.6 weight: 162 kg ​