Pumping Set

Grundfos MTR20-8/8 A-W-I-HQQV

Condition: ready for operation (used), Year of construction: 2022, operating hours: 2,000 h, functionality: fully functional, type of input current: three-phase, input voltage: 6,300 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, fuel: domestic gas H, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, Solar gas turbine Taurus 65 Solonox (6.3 MWe) ready for delivery. Package description: Taurus 65 8401S (6.3 MWe ISO), Solar RGB & Leroy Somer 6.3 kV generator. Year of manufacture: Package 2011; gas turbine and gearbox replaced with new units in 2022. Engine starts: 14 / Package starts: 399. Running hours (gas turbine & gearbox): 2,423 hours. Location: Spain – unit stored at our indoor, temperature-controlled facility. The genset is currently available in our Zaragoza warehouse. Inspections welcome at any time. Scope of supply: - Main package in container, including: • SOLONOX Taurus 65 gas turbine generator (T65) – 2,423 operating hours • 6,300 V alternator • Control panels • Fire detection module • Gas train • Air inlet filter • Air outlet duct • Oil cooler • Gas compressor • 2 x gas storage tanks • Gas compressor cooler - Control system: • On-skid TTS4 Control System (Siemens S7 based) Available documentation: - Official borescope inspection report carried out by Solar following shutdown - Alternator maintenance report - Official Solar certificate confirming replacement of gas turbine and gearbox with new units in 2022 Pjdpfx Aeytpbief Sorb - Official data sheet for the complete package Additional information: - Most recent power generation: end of 2023 - Preservation: stored indoors in temperature-controlled building - Delivery: immediate

Condition: used, GRUNDFOS vertical multistage high-pressure centrifugal pump Pump in like-new condition, but a part of the magnetic coupling has been removed. Type CRN 10-09 MP-FGJ GI-V Year of manufacture: approx. 2012 Flow rate at 7.2 bar: max. 10 m3/h Head: max. 91.8 meters Podpofupadefx Af Ssrb Power supply: 400 volts, 50 Hz Power: 3 kW - Pump design with 9 stages - Made of stainless steel 1.4401 - The like-new pump was used as a source of spare parts, but several new pump chambers are included - A part of the magnetic coupling is missing Suitable for potable water supply, irrigation, and drainage Packaged in the original wooden crate Pump dimensions (L x W x H): 1100 x 250 x 300 mm Shipping crate dimensions (L x W x H): 1400 x 330 x 340 mm Weight with shipping crate: 85 kg Like new Not a submersible pump or a deep-well pump.

Condition: used, Year of construction: 2016, Overview The filling line for glass bottles (non-refillable and refillable) was in operation at a small brewery in Germany until recently. The line is set up for 0.33l longneck bottles and can fill up to 2,500 bph. The machine is still in operation and can be inspected at any time after consultation. The bottle washer and the unpacker can also be purchased separately.  Technical details  Capacity: 2.500 bph Formats: set up for 0.33l longneck  Filling temperature: 6°C  Packaging:  0,33l Longneck in 24er folding box  0,33l Longneck in 24er modular box Individual machines / line components  New glass lifter | Füllmeister | - | 2016 Filler + capper | H&K | VVF 14/3 | 1966 2016 general overhaul (with pre-evacuation - new rotary ball connection - new stainless steel table - new electrics - new valve control cabinet in stainless steel design - 0.33 liter guide set - Sihi vacuum pump.) Seals on lifting cylinders and filling valves renewed 2023 Vacuum and relief valves fitted with new seals and springs 2023 Bottle unpacker | Joha | - 1982 Packing head for 24 bottles in modular crate  Bottle washer | Silmo | Praktika | 1983 Bottles per row: 12  Label discharger Labeler | Krones | Vinetta | 1999 Type 480-6-3-180      Labelling station for back labels Labelling station for breast labels and neck loops  Three glue pallets and gripper sponges each Glue pallets, gripper sponges and sponge roller at bottle discharge new 2023  Glue pump Krones Unipump-H with glue heater  Packer | Pexco | - | - 1 head for 24 bottles in module box 2016 new electrics installed and machine overhauled  Residual liquid and finish control | Miho | LC2000 | Residual liquid detection from bottle cleaning machine  Control of bottle mouth for crown cork/metal Incl. balancing screen from Silmo for visual control of the cleaned bottles Crate washer | Fleischer | - | -  For cleaning of plastic empty crates, in longitudinal run Module size: 300x400mm  Overhauled in 2016 Compressor | Alup | Allegro 19-10 | 2016  Oil-free 4897 operating hours  Transport Bottle transport: various conveyor belts + 90° bends  Crate transport/ roller conveyor: 2016 overhauled with stainless steel cheeks and feet Prsdpfol Hx Rpjx Af Seb

Condition: like new (used), Year of construction: 2008, functionality: fully functional, pressure: 10 bar, operating pressure: 10 bar, For sale: a LOOS steam boiler with a gas burner. Type: UL-S 2000 Optionally available with an oil burner. Complete unit. The system is in new condition and has not been used in operation. Steam output: 2000 kg/h. Maximum steam pressure: 10 bar. Delivery available at an additional cost. Prsdpjyllf Isfx Af Sjb On-site inspection possible. Please feel free to contact us if you have any questions.

Condition: repair required (used), Year of construction: 2016, operating hours: 90 h, functionality: limited functionality, fuel type: diesel, power: 44 kW (59.82 HP), nominal power: 44 kW (59.82 HP), continuous power: 44 kW (59.82 HP), continuous power (apparent): 55 kVA, Diesel Generator ETT-55E (55 kVA) for Sale Condition: Used. The cooling pump is not working and oil is entering the engine; the oil pump needs replacement. Otherwise in technically good condition. We can start the unit for demonstration. A brand new fuel pump is included in the offer. Manufacturer: ETT – Electrotech Dış Ticaret ve Tekstil Ltd., Turkey. Reliable three-phase diesel generator with automatic control panel and soundproof enclosure. Suitable for both backup power supply and continuous industrial or construction site use. Technical specifications: Model: ETT-55E Operating hours: 90 h Output (Standby): 55 kVA / 44 kW Output (Prime): 50 kVA / 40 kW Engine: Ricardo K4100ZDS (diesel, 4 cylinders, water-cooled) Alternator: WHI224D, brushless, with Automatic Voltage Regulator (AVR) Voltage / Frequency: 400 / 230 V – 50 Hz Current: 79 A Power factor (cosφ): 0.8 RPM: 1500 rpm Cooling: Water Prsdpfx Afexlngas Sjb Fuel consumption: ~10 L/h (at 100% load) Fuel tank capacity: 260 L (up to 8 hours continuous operation) Dimensions (LxWxH): 2250 × 1000 × 1500 mm Weight: 1100 kg Year of manufacture: 2016 Country of origin: Turkey Controls and features: Automatic DATKOM DKG309 control module Emergency stop button Fuel level, oil pressure, temperature, and voltage sensors Battery charging system Automatic transfer switch (ATS) for mains/generator control Overvoltage, overload, and low oil pressure protection Soundproof enclosure – reduced noise levels Manual or automatic operating mode Typical applications: Suitable for: - Industrial facilities, warehouses, production plants - Construction sites and mobile workplaces - Backup power for hotels, hospitals, office buildings, or farms A reliable solution for stable and uninterrupted power supply. Feel free to contact us if you have any further questions.

Condition: new, Year of construction: 2022, NWC110 Cummins Engine Newpower Generator The unit is new, complete with controls, diesel tank, exhaust and batteries. Technical specifications Engine : Cummins 6BTA 5.9-G2, 6cylinder, water cooled Generator: Newpower NW/N 110 Continuous power: 80 kW / 100 kVA Maximum power: 88 kW / 110 kVA Connection:4P circuit breaker, (optional sockets, optional automatic transfer switch..) Frequency : 50Hz Voltage: 400/230V RPM : 1500 rpm. Diesel tank: 8-10 operating hours Dimensions (LxWxH): 3000x 1000x1745mm Weight: 1600 kg Network monitoring, soundproof additional costs; Prodpfsh U Nxfox Af Sob Automatic transfer switch: € 980 Shipment: - Worldwide transport including unloading is possible for an extra charge - In order to be able to give an exact freight price, please send me an inquiry with your data and your

Condition: like new (used), Multi-stage, submersible, self-priming centrifugal pump Type: MTR 20-19/6 A-W-A-HQQV Product No.: A45937986 Dimensions: L 150 cm, W 30 cm, H 30 cm // approx. 102 kg Prodpfx Aofz D Dnjf Sjb

Condition: like new (used), Year of construction: 2018, Complete Aerzen D17L and D28L units are for sale. Prodpfjlnlr Eox Af Seb Manufactured in 2018, they are in excellent condition and equipped with 15 kW and 22 kW motors. Warranty included. For more information, please contact me by phone or email.

Condition: new, empty load weight: 15,550 kg, maximum load weight: 47,450 kg, overall weight: 63,000 kg, axle configuration: 3 axles, loading space length: 8,800 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 R 17,5, color: grey, Equipment: ABS, Gooseneck: -Gooseneck in SNT design for optimized loading area length, approximately 3,700 mm long -Gooseneck with rear bevel approximately 1,000 mm x 10° Loading Platform: -Loading platform in extendable design, approximately 8,800 mm long, with bevel at the rear approximately 500 mm x 10° -Recess in the loading platform and into the bevel for accommodating the excavator arm -Pneumatic locking system with tapered locking pins and reinforced locking positions -Hardwood decking on the bevel of the loading platform Ramps: -1 pair of two-part steel ramps with a length of approximately 4,350 mm and a width of approximately 900 mm -Ramps with hardwood decking -Hydraulically folding ramp ends -Ramps can be individually hydraulically moved outwards by approximately 235 mm and inwards by approximately 215 mm -Square ladder strips 20 x 30 mm, approximately every 200 mm on the outer frame of the ramp Axles and Suspension: -BPW axles and suspension, 1st axle with steering knuckle, all other axles with hydromechanical forced steering -Technical axle load: 12,000 kg -1st axle with electromagnetic reverse lock via reverse gear and can be activated manually -Air suspension with lifting and lowering valve -Tires 235/75 R 17.5, twin tires -TPMS tire monitoring system according to ECE R141 -TPMS tire monitoring sensors mounted in all wheels including spare wheel Included accessories: -Steel front wall, plug-in, approximately 400 mm high -3kW electro-hydraulic unit for controlling the hydraulic operations, with the exception of hydraulic winches -Parking position on the gooseneck for the warning signs when not in use -1 spare wheel -On the gooseneck, 1 pair of plug-in aluminum sideboards, approximately 400 mm high, anodized -On the gooseneck, 1 plug-in aluminum rear wall, approximately 400 mm high, anodized -Approximately 40 mm thick hardwood decking above the gooseneck, checkered plate decking above the kingpin -2" kingpin -Guide plate from the gooseneck for the fifth wheel plate, approximately 500 mm wide -4 chock blocks -Mechanical landing gear with 2-speed gearbox and crank -JOST Module B – static test load = 50,000 kg -1 intermediate table, approximately 300 mm wide -Extensions (galvanized), extendable by approximately 230 mm on each side -Wheel recesses with square ladder strips -Aluminum covers for the wheel recesses -1 pair of mechanical rear supports -Steering assistance at the front and rear, operable via cable remote control, with single-axle monitoring -1st axle with automatic lift axle function -Central lubrication system with 1 pump, brand BEKAMAX Podpfx Afsk Aht Uj Sjrb -Wireless remote control for operating the steering assistance, in addition to the cable remote control, with 2 indicator lights on the receiver for single-axle monitoring -Wabco Smart Board system -4 warning signs, approximately 423 x 423 mm, extendable by approximately 400 mm, incl. 2 position lights and mounts for rotating beacon

Condition: excellent (used), Year of construction: 2009, Boiler Astebo 5500kw,10Bar,120°,year 2009,capacity 5250l Podpfx Aevu I Dnjf Sjrb