Used Grundfos Feed Pump for sale (67)

Condition: new, We are selling a new, unused Grundfos circulation pump, a German manufacturer. The pictures show the characteristics of the pump. As you can see in the pictures, the pump was unpacked-new. Contact us, we are ready for an agreement Pgedoupuqgjpfx Ahvei

Condition: excellent (used), For sale: Industrial pump from the renowned manufacturer Grundfos. Model SPK 4-8 – vertical multistage pump designed for clean liquids, coolants, industrial installations, and CNC machines. Technical data: Manufacturer: Grundfos Model: SPK 4-8 A-A-A Power: 0.55 kW Speed: 2850 rpm Capacity: approx. 3 m³/h Head: up to 28 m Liquid temperature: max 90°C Country of manufacture: Denmark Condition: Used, fully functional. Visible signs of use (abrasions, minor corrosion – see photos). Podpfxjywpahe Ahvegi A crack is visible near the nozzle on the casing – does not affect operation (buyer to verify).

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables Pgedpfxeyug R Re Ahvoi setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: ready for operation (used), Centrifugal Pump, Pump, Grundfos 4 kW, Used Machine Manufacturer: Grundfos Type: CR 10-12 A-A-A-V-HQQV Overall Dimensions: Length: 255 mm Width: 240 mm Psdpfx Aev Dr Icehvjgi Height: 1040 mm Flow Rate: 10 m³/h Head: 96.7-122 m Year of Manufacture: 2020 Electrical Data: 400V; 4 kW; 7.9 A

Condition: excellent (used), functionality: fully functional, power: 7.5 kW (10.20 HP), The pumps are suitable for supplying grinding oil for tool production. The pumps were in use up until recently on a central system. There are 2 units in stock. Psdpjylqbusfx Ahvegi

Condition: new, functionality: fully functional, machine/vehicle number: CR1-10 AAAE-HQQE, pump pressure: 16 bar, Grundfos CR1-10 AAAE-HQQE Vertical Multistage Centrifugal Pump Model: A96516180P10544 Serial No.: 0001 Power: 0.55 kW Pmax/Tmax: 16 bar / 120°C This is a high-performance vertical multistage centrifugal pump with inline inlet and outlet ports for easy integration. The pump head and base are constructed from durable cast iron, while all wetted parts are made from corrosion-resistant stainless steel. Key Features: According to Grundfos Product Center and Lenntech, the specific configuration codes for this model indicate the following: Design Type (CR1-10): "CR" denotes the standard vertical multistage range; "1" indicates a nominal flow rate of 1 m³/h (rated at 1.8 m³/h in some 50Hz configurations); "10" refers to the number of stages (impellers) inside the pump. Construction Materials (A-A-A): The first "A" signifies the basic pump version; the second "A" indicates a pipe connection via oval flanges with internal Rp threads; and the third "A" confirms the materials used—cast iron for the pump head and base, with all wetted parts (impellers and chambers) made of stainless steel. Rubber Components (E): This code stands for EPDM, the material used for the O-rings and gaskets. Shaft Seal (HQQE): This is a balanced cartridge shaft seal. H: Cartridge type. QQ: Silicon carbide seal faces. E: EPDM rubber parts. ENVIEQ ENVIEQ +4 Reliable cartridge shaft seal for safe handling and easy maintenance Rigid split coupling for efficient power transmission Pipe connection via oval flanges with internal Rp threads Fitted with a 3-phase, fan-cooled asynchronous motor The steel, cast iron, and aluminum components are coated using a high-quality epoxy-based cathodic electro-deposition (CED) process. This ensures a thin, uniform protective layer that enhances corrosion resistance and surface durability. Rated Flow & Head: Typically offers a rated flow of 1.8 m³/h and a rated head of approximately 47.1 meters. Motor: Usually fitted with a 0.55 kW, 3-phase asynchronous motor. Temperature Range: Suitable for liquid temperatures ranging from -20 °C to +120 °C. Applications: Commonly used in HVAC systems (heating and air conditioning), water treatment (reverse osmosis), and irrigation. Pgsdpswtd Hnjfx Ahvsi Ready for use in demanding industrial or commercial systems. The pump is not used.

Condition: good (used), Item: D-1903-Grundfos pump CR8-30 Water pump, Grundfos, used! Podpeirfblefx Ahvegi Type P2-140 K Capacity 2.000 l, 90 m. 1,1 kW

Condition: new, Year of construction: 2022, functionality: fully functional, NEW Grundfos Pump CRN 10-12 A-FGJ-G-E-HQQE | Stainless Steel AISI 316 | 4 kW Condition: Brand new, never used. Model: CRN 10-12 A-FGJ-G-E-HQQE Manufacturer: Grundfos (Leading pump solutions provider) DEVICE DESCRIPTION The item for sale is a high-performance, vertical multistage centrifugal pump from the CRN series. This is a version made entirely from acid-resistant stainless steel (AISI 316), setting it apart from the standard cast iron models (CR). It is designed for operation in the most demanding industrial conditions, ensuring reliability when handling aggressive and demanding liquids. The pump is an ideal solution for businesses seeking a high-efficiency device, ready for immediate installation in water treatment systems, technological processes, or high-pressure setups. _____ KEY TECHNICAL DATA Pjdpsx Im Ahofx Ahvjgi • Rated flow: 10 m3/h • Rated head: approx. 96.7 m (max up to 122 m) • Motor power: 4 kW • Power supply: 3-phase • Rotational speed: 2900 rpm • Maximum operating pressure: 25 bar • Liquid temperature range: -20°C to +120°C • Number of impellers: 12 • Year of manufacture: 2022 CONSTRUCTION AND MATERIALS • Material configuration (G): All liquid-contacting parts are made from stainless steel EN 1.4401 / AISI 316 (providing maximum corrosion resistance). • Shaft seal (HQQE): Durable cartridge mechanical seal made from silicon carbide (SiC/SiC) with EPDM elastomers. Guarantees longevity and leak-tight operation even with hot water. • Connection (FGJ): Universal flanged system (DIN/ANSI/JIS), allowing easy adaptation in existing installations. _____ APPLICATIONS Thanks to its acid-resistant construction, the CRN pump is suitable for: 1. Chemical and pharmaceutical industries (pumping acids, alkalis, aggressive media). 2. Filtration and water treatment systems (reverse osmosis, ultrafiltration). 3. Industrial washing systems and CIP/SIP cleaning setups. 4. Process water installations in brewing, dairy, and food industry. _____ WHY BUY THIS PUMP? • Premium product: The CRN series is the “Mercedes” among vertical pumps. • Time-saving: Device is available immediately (no long lead times from the manufacturer). • No usage marks: The pump is brand new, properly stored, and ready to operate at full capacity. Important: Please verify that the electrical and hydraulic parameters match your project requirements before purchase.

Condition: ready for operation (used), Pump, Vertical Centrifugal Pump, Grundfos Pgedpfxjwmbuis Ahvoi Manufacturer: Grundfos Model: CR4-220 A-F-A-AUUE Flow Rate: 6 m³/h Head: 140 m Pressure: 21 bar / 120 °C Electrical Data: 4 kW; 8–10 A; 400 V

Condition: ready for operation (used), Grundfos CR5-16A-A-A-V-HQQV vertical multistage centrifugal pump with MG90LC2-24FT115-H3 servomotor SN: DE6305.2Z.C4, used, in good condition, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire for packing and shipping costs separately! Podpew Nmkmofx Ahvegi

Condition: ready for operation (used), Grundfos SPK8-5/3 A-W-A-AUUV exchange pump D3HNH0403P31126 SN: MK116551 with MG71B2-14FT85-C pump motor No. 85805103,used, good condition, 100% functional, scope of delivery according to photos Podpfxsmq H R Se Ahvjgi

Condition: new, Grundfos CM5-5-A-R-I-V-AQQV F-A-A-N horizontal suction pump, unused, 100% functional, scope of delivery as per photos Pgedpfx Asuqr Hbehvsi

Condition: ready for operation (used), Grundfoss MTR5-32 / 32 A-W-I-HUUV submersible pump Model: A96518681P2 0506, used, normal signs of wear, 100% functional, scope of delivery as per photos, ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Pjdji D Ibcjpfx Ahvjgi

Condition: new, Grundfos CM5-5A-R-I-V-A00V-F-A-A-N centrifugal pump Viton version, unused, 100% functional, scope of delivery as per photos Pjdpfxouqr Hhe Ahvegi

Condition: ready for operation (used), Grundfos MTR15-9 / 2 A-W-I-HOOK submersible pump Model: A99371564P31750 SN:0001,used, normal traces of use, 100% functional, scope of delivery according to photos Pgjdelmtawjpfx Ahvji

Condition: ready for operation (used), Grundfos SPK4-15 / 5X A-W-A-CVUV submersible pump SN:64410798602 with MG71A2-14F85-B motor, used, normal signs of use, 100% functional, scope of delivery as per photos Pgsdpfx Ahslcf N Esvsi

Condition: ready for operation (used), Grundfos SPK2-15 / 8X A-W-A-CVUV submersible pump SN:64812211001 with MG71A2-14FT85-B motor, used, normal signs of use, 100% functional, scope of delivery as per photos Pgsdpfx Aslcf Nzohvji

Condition: new, Grundfos CR10-06 A-A-A-E-HQQE centrifugal pump, SN:0045 ,unused, 100% functional, scope of delivery according to photos,ATTENTION: Pleasequire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Pjdpfx Ahsi D Ia Ajvsgi

Condition: ready for operation (used), Grundfoss MTR15-29 /7 A-W-I-HOOV submersible pump Model: A9+6574235P10510 SN:0001, used, normal signs of use, 100% functional, scope of delivery as per photos Podpfxji D Ia Us Ahvjgi

Condition: ready for operation (used), Grundfos CH4-50 A-W-A-AUUE pump F-44Z58305 SN 36517-09, used, strong signs of use, 100% functional, scope of delivery as per photos Pgsdpfx Ahenuuqievoi

Condition: ready for operation (used), Delivery volume: 0.8 m³/h Speed: 2850 rpm Motor: 400 V, 0.37 kW Submersion depth: 200 mm Psdpfsv E D Rlsx Ahvogi Total height: 520 mm

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, A complete cooling water unit that was used for cooling screw compressors. Pump unit with machine frame, consisting of: - 3 x Grundfos CRNE45-2-2 A-F-G-V-HQQV centrifugal pumps (Year of manufacture: 2012) Q = 45 m³/h, H = 30.6 m, P2 = 5.5 kW - 6 x manual stainless steel shut-off butterfly valves DN 80 - 3 x basket strainers DN 80 - 3 x check valves DN 80 - 1 x pressure relief valve - 2 x Rosemount GP6 S22 C1 pressure transmitters - 6 x stainless steel gauges Cl. 1 - 1 x GRP pipe - 1 x mounting frame Dimensions: Length: 2400 mm Width: 2000 mm Height: 1400 mm Weight: 780 kg Heat exchanger unit with frame, consisting of: Pgedpsywuihjfx Ahvoi - 2 x bolted plate heat exchangers, Funke Apparatebau GmbH (Year of manufacture: 2001) Type: FPS 21-100-1-E Volume: 29.2 / 29.8 liters Max. operating pressure: 10 bar Max. temperature: 80°C - 8 x manual intermediate flange shut-off butterfly valves, stainless steel - 1 x KSB BOA electric valve with Auma SAR actuator and MATIC head, including Harting connector - 2 x PT 100 sensors - 6 x analog thermometers, stainless steel Cl. 1 - 2 x PE pipework with bends 110x65mm Gerodur - 1 x expansion vessel - 1 x mounting frame Dimensions: Length: 2200 mm Width: 2000 mm Height: 2000 mm Weight: 1500 kg

Condition: new, For sale: new Grundfos CRN5-11 vertical multistage pump. The pump has never been used and comes from warehouse surplus. The equipment is in excellent condition, stored in its original packaging. Manufacturer's documentation included in the set. Grundfos CRN series pumps are designed for use in industrial and water installations. They are characterized by high performance, reliability, and excellent build quality. Technical data Manufacturer: Grundfos Model: CRN5-11 A-P-A-E-HQQE Motor power: 2.2 kW Frequency: 50 Hz Rotational speed: 2899 rpm Capacity: 5.8 m³/h Head: up to 56.5 m (max 76 m) Maximum pressure: 25 bar Maximum temperature: 120°C Podpfxeyubcno Ahvsgi The pump is made of stainless steel, suitable for use in water installations, industrial systems, pressure systems, process installations, and water treatment systems. Condition: new, never used.

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) Pgedpfsyug Hxsx Ahvsi "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Year of construction: 2011, condition: used, functionality: fully functional, A complete cooling water unit used for cooling screw compressors. Pump unit with machine frame consisting of: 3 x Type: CRN32-1-1 A-F-G-V-HQQV / 30 m³/h 10.7 meters, 1.5 kW 6 x manual stainless steel shut-off valves 1 x pressure relief valve 1 x Rosemount GP6 S22 C1 pressure transmitter Psdpfx Aheyrxuvevogi 6 x stainless steel pressure gauges Cl.1 2 x Gerodur plastic pipes with elbow fittings, 140 x 8.3 mm 1 x mounting frame Heat exchanger unit with frame consisting of: 2 x bolted plate heat exchangers Alfa Laval Type: M6-MFG Volume: 11.2 liters Max. operating pressure: 10 bar Max. temperature: 80°C 6 x manual intermediate flange shut-off valves, stainless steel 2 x electric valves with Auma actuators with Harting connectors 2 x electric KSB BOA valves with Auma SAR 07.1-F10 actuators and MATIC heads with Harting connectors 2 x PT 100 thermometers 4 x analog thermometers stainless steel Cl.1 1 x Rosemount GP6 S22 C1 pressure transmitter 2 x PE welded pipe with bends 110x6.5 mm Gerodur 2 x PE pipe with bends 90x5.4 mm Gerodur 1 x expansion vessel 1 x mounting rack