Used Groove Bed for sale (5,353)

Condition: good (used), functionality: fully functional, Conventional milling machine Huron PU661: 1500*1000*1000 mm. Djdpfx Aey Huv Hjkcscg

Condition: excellent (used), overall weight: 4,600 kg, total height: 305 mm, total length: 4,000 mm, total width: 1,640 mm, Floorplate Length: 4000mm Dcjdpfx Aey D Ngnekcjg Floorplate Width: 1640mm Height: 305mm No. Of T-slots: 5 Distance from T to T-slot / Jump:330mm T -slot size: 28mm Number of matching pieces: 1 Length: 4000mm Width: 1640mm Height: 305mm Weight: 4600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Travel X/Y/Z: 1400mm/1000mm/1000mm, table dimensions X/Y: 1600mm/850mm, max. table load: 2500kg, speed: 4000rpm, spindle power: 22kW, feed: 20m/min, spindle taper: ISO50. Machine dimensions X/Y/Z: approx. 4300mm/2500mm/2600mm, weight: approx. 10000kg. An on-site inspection is possible. Dcjdpfxjy Hk Ule Akcog

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: G70303, MACHINE SPECIFICATION Height of centres 195mm Swing over bed 400mm Swing over cross slide 246mm Swing in gap 585mm Width in front of faceplate 16mm Bed length between centres 1250mm Spindle speeds (16) 25-2000rpm Spindle nose mounting (Camlock) D1-6 Spindle bore 54mm Spindle motor 7.5kW Width over bedways 318mm Travel of cross slide 250mm Travel of top slide 130mm Travel of tailstock barrel 178mm Taper in tailstock barrel No. 5 MT Approx. weight 1800Kg Machine in Metric execution MACHINE EQUIPPED WITH Newall 2 axis DRO System 3 Jaw chuck Quick change toolpost and 3-off toolholders Dedpfsy Hh Ivsx Akcscg Stationary steady Chuck guard Coolant system Rear splashguard

Condition: used, Year of construction: 2013, operating hours: 18,995 h, functionality: fully functional, machine/vehicle number: VH-20053, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, position of the milling head: mittig, spindle speed (max.): 3,500 rpm, spindle speed (min.): 50 rpm, table width: 1,050 mm, table load: 5,000 kg, table length: 2,100 mm, table height: 860 mm, total height: 3,500 mm, total width: 4,485 mm, total length: 5,550 mm, type of input current: AC, workpiece weight (max.): 5,000 kg, overall weight: 11,000 kg, control cabinet width: 600 mm, power: 25 kW (33.99 HP), control cabinet length: 1,275 mm, control cabinet height: 2,370 mm, Equipment: rotational speed infinitely variable, For sale is an MTE BF-2000 CNC bed-type milling machine, year of manufacture 2013, in very good condition with comparatively low hours of use. The machine is ideal for precise and heavy machining operations in mechanical and tool engineering. Thanks to its rigid bed construction and powerful spindle, large and heavy workpieces can also be machined reliably. The machine is well maintained, fully functional, and can be inspected by appointment. Further technical data and accessories are available on request. Dodpfx Asytqdrekcocg Control: Siemens 840D SL Spindle taper: SK50 (DIN69871) The quoted price is exclusive of dismantling, packaging, and shipping. Sale ex works; subject to prior sale. Machines are sold in used condition; any guarantee and warranty are excluded.

Condition: excellent (used), CATALOG NO. 7227 TECHNICAL DATA - Working width: 40 – 300 mm - Material thickness: 10 – 35 mm - Min. material length: 270 mm - Max. material length: unlimited - Max. feed speed: 90 m/min - Feed speed steplessly adjustable via inverter from control panel - Cutting speed: 24 m/min - Milling motor power: 2x 4 kW Dsdjyy Nd Eopfx Akcjcg - Milling spindle speed: 7,500 rpm - Feed motor power: 0.75 kW - Pneumatic top and side pressure - Spindle diameter: 40 mm - Motor-driven infeed roller conveyor, length 1,130 mm - Manual / automatic operation - PLC controller with touchscreen for easy operation - Compressed air connection: 8 bar - Extraction outlet diameter: 150 mm - Dimensions (L/W/H): 2,550 x 1,200 x 1,400 mm - Weight: 1,100 kg ADVANTAGES – German manufacturing – Operating and maintenance documentation (DTR) – Machine for tongue and groove profiling – Set includes complete cutter and head set – Motor-driven infeed roller conveyor – Unpainted – Used machine, in very good condition Net price: 107,900 PLN Net price: 25,690 EUR (according to exchange rate 4.2 EUR/PLN) (Prices may vary depending on currency fluctuations)

Condition: good (used), mileage: 996,895 km, power: 294 kW (399.73 HP), first registration: 04/2014, fuel type: diesel, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 700 l, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, total length: 5,920 mm, total width: 2,550 mm, total height: 3,800 mm, Year of construction: 2014, Equipment: ABS, AdBlue, EBS, air conditioning, cruise control, differential lock, electric window regulation, onboard computer, traction control, = Additional options and equipment = - Aluminium fuel tank - Differential lock - Radio/CD player - Sleeper cab = Further information = Transmission: ZF, 12-speed, automatic Number of cylinders: 6 Djdpfx Aey Hcvhokcocg Engine capacity: 10,837 cc Unladen weight: 7,563 kg Payload: 10,437 kg Gross vehicle weight: 18,000 kg Technical condition: good Contact Vitali Lenda for more information.

Condition: used, Guideway and surface grinding machine WMW FRITZ HECKERT Aschersleben type SZ 1000 x 1250 x 3000 / 344 make no. 13.2236.2 year of construction 1989 nominal grinding area 3000 x 1250 mm table clamping area 3240 x 1000 mm grinding length max. 3300 mm Machining width 1250 mm Machining height 1250 mm grinding wheel diameter (surface grinding support) max. 600 mm grinding wheel width (flat grinding support) max. 100 mm grinding wheel diameter (swivel support) max. 450 mm Mains connection 400 Volt, 50 Hz - grinding support swiveling, drive power 16,5 kW, infinitely variable speed - grinding support for surface grinding, drive power 15 kW, infinitely variable speed - new electrical control, based on SIEMENS S7 from year 2001 - new electric control cabinet beside, year of construction 2001 - infinitely variable grinding wheel speed at both grinding supports - swiveling wheelhead for guideway and profile grinding - swivel-mounted and height-adjustable control panel - coolant system adjacent - Hydraulic system adjacent - oil circulation lubrication adjacent - Various grinding wheels and holders space requirement complete L x W x H 11900 x 7700 x 4600 mm weight 45 ton. Dcsdpfxshv A A De Akcsg very good condition

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Huron Fixed Bed Milling Machine Type SXB 833 Year 1990 Dcodjy Dgh Aspfx Akceg Heidenhain CNC Good condition Video available Travels X Longitudinal table travel: 3000 mm Y Cross travel of ram: 1000 mm Z Vertical console travel: 1000 mm

Condition: used, Year of construction: 1998, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (min.): 3,000 rpm, table width: 1,000 mm, table length: 2,700 mm, total width: 1,000 mm, total length: 1,700 mm, overall weight: 5,500 kg, Unique opportunity: Used MTE fixed bed milling machine, model BF-1700. SPECIFICATIONS CONTROL UNIT MODEL: TNC 410 BRAND: HEIDENHAIN MAIN DRIVE SPINDLE SPEED RANGE: 40 – 2,500 rpm MAX. SPINDLE SPEED: 3,000 rpm Dedpfey E Iqnjx Akcjcg SPINDLE TAPER: SK 50 TRAVELS X-AXIS TRAVEL: 1,500 mm Y-AXIS TRAVEL: 1,000 mm Z-AXIS TRAVEL: 1,000 mm WORKTABLE EXTERNAL LENGTH: 1,700 mm EXTERNAL WIDTH: 1,000 mm TABLE LOAD CAPACITY: 5,500 kg YEAR: 1998

Condition: used, Mounting Table, T grooved worktable, Welding table, T-slot table,T-slot plate,Used Machine Dcodpey A N T Sefx Akceg Overall dimensions: 4020 x 1720 x 410 mm Groove dimension : 65x55 mm

Condition: used, Year of construction: 2017, feed length X-axis: 390 mm, feed length Y-axis: 240 mm, feed length Z-axis: 400 mm, spindle speed (max.): 10,000 rpm, table length: 810 mm, table width: 250 mm, overall weight: 1,320 kg, table load: 80 kg, workpiece weight (max.): 7 kg, Bed type CNC milling machine Dcodpfx Asy Awgyjkceg Brand: Travis Model: MM-4 Year: 2017 Control: Fagor 8055i Table: 810x250 mm Maximum table load: 80 kg Travel (X, Y, Z): 390, 240, 400 mm Taper: BT40 Clamping: Pneumatic Spindle speed: 10,000 rpm Tool changer: 8 positions Tool diameter: 80 mm Tool height: 260 mm Tool weight: 7 kg Machine weight: 1,320 kg Machine from IAIN Mecanizados workshop in Hospitalet de Llobregat. Arrange a visit to inspect the machine on site.

Condition: good (used), functionality: fully functional, mileage: 111,000 km, power: 324 kW (440.52 HP), first registration: 04/2018, fuel type: diesel, empty load weight: 9,310 kg, maximum load weight: 8,690 kg, overall weight: 18,000 kg, tire condition: 60 %, axle configuration: 2 axles, wheelbase: 5,700 mm, axle spacing: 5,700 mm, fuel: diesel, fuel tank capacity: 300 l, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, number of seats: 2, total length: 9,750 mm, total width: 2,550 mm, total height: 3,750 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 13,000 kg, loading space volume: 42 m³, loading space length: 7,200 mm, loading space width: 2,480 mm, loading space height: 2,350 mm, Equipment: ABS, AdBlue, Bluetooth, EBS, additional headlights, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), full service history, lane keeping assist, onboard computer, parking heater, power assisted steering, power mirror, soot filter, tachograph, tail-lift, traction control, trailer coupling, truck registration, ADDRESS / Location: 13089 Berlin-Pankow Dsdpfsyvtpdsx Akcocg Automatic transmission Rear axle with air suspension Differential lock ACC, adaptive cruise control Tow bar Large 1.5 t tail lift with a 2m barrier Large cab (FFH) with a bed Refrigerator Air conditioning Auxiliary heater Storage boxes Original mileage, from first owner Regional rental possible for at least 24 months for local company transport! Trade-in possible Delivery possible WhatsApp +491772773745

Condition: excellent (used), Grooving tool, special tool, grooving tool, grooving machine, grooving machine, grooving tool -Special tool for grooving blind holes Dedpfx Akeb A I Ufececg -Guided tour -grooving tool -Weight: 80 kg

Condition: ready for operation (used), functionality: fully functional, color: grey, Year of construction: 1988, Aeroplex fluidised bed counterjet mill 400 AFG The plant is fully functional and can be inspected on site. Trial milling can be carried out in advance depending on the material. In 2005, the plant was modernised and converted to load cells. Electrical control system: Simatic S7-300 The plant consists of the following units: 1. Mill 2. Raw material filling unit 3. Air filter Dcjdpfsx T Ar Nox Akcog 4. Electrical switchgear

Condition: used, axle configuration: 3 axles, first registration: 12/2012, total length: 13,860 mm, total width: 2,550 mm, suspension: air, tire size: 235/75R17.5, wheelbase: 11,250 mm, color: black, Year of construction: 2012, 400 cm extendable. 3 x steering axles. Remote steering. Loading bed: 565 cm + 400 cm. Loading height: 45 cm. = Further Information = Axle configuration Tyre size: 235/75R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tyres; Steering; Left inner tyre tread: 30%; Left outer tyre tread: 50%; Right inner tyre tread: 30%; Right outer tyre tread: 50% Rear axle 2: Twin tyres; Steering; Left inner tyre tread: 40%; Left outer tyre tread: 40%; Right inner tyre tread: 40%; Right outer tyre tread: 40% Rear axle 3: Twin tyres; Left inner tyre tread: 30%; Left outer tyre tread: 40%; Right inner tyre tread: 30%; Right outer tyre tread: 40% Weights Unladen weight: 13,320 kg Payload: 34,680 kg Gross vehicle weight: 48,000 kg Dcsdpfx Aowypatskcjg Identification Type number: MPG 3 / EXTENDABLE / LOW BED / 3 = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-EN), Wouter Greutink (NL-DE-EN-ES-IT). We also speak Russian. We do our utmost to provide correct information; however, no rights can be derived from the information provided in these listings.

Condition: used, Year of construction: 1996, functionality: fully functional, overall weight: 1,750 kg, total width: 1,120 mm, total length: 3,750 mm, number of chambers: 1, Equipment: documentation/manual, For sale: a high-performance fluid bed dryer from the renowned manufacturer Buhler, model OTWG-280. This is a horizontally constructed machine designed for the continuous thermal processing of bulk and granular materials. With its sectional design, the machine can function both as a dryer and a cooler, making it an extremely versatile element of any production line. Dcjdpfx Aksy D Iiujceg The machine utilizes the principle of fluidization. The process involves blowing hot (or cold) air through a perforated base holding the raw material. The air lifts the material particles, forming a so-called "fluidized bed." In this state, each particle is surrounded on all sides by the heating/cooling medium, providing: - Instant heat exchange (significantly faster than drum dryers) - Uniform drying with no risk of localized overheating - Gentle product handling – minimal risk of mechanical damage to raw materials We have two OTWG 280 units and one OTWG 90 unit available. The price for the OTWG 280 is listed in the advertisement. OTWG 90 price: 40,000 EUR.

Condition: good (used), functionality: fully functional, travel distance X-axis: 12,000 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 1,000 mm, MECOF CS 50 CNC Universal Milling SELCA S3045L, Built 1997, Two axis Head C-Axes 360° x A-Axes 3° Bed 13,300 x 1,090 mm. X, Column travel 12,000 mm Y, Headstock vertical travel 1,800 mm Dsdpfowdm U Nex Akcjcg Z, Frame 390 x 390 mm, stroke 1,000 mm Bed 13,300 x 1,090 mm Two axis Head C-Axes 360° x A-Axes 3° Spindle taper ISO 50 Spindle speed 10 - 4,500 rpm Spindle motor 20 kW Automatic tool changer 41 Tools

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, table width: 1,000 mm, table length: 2,700 mm, total height: 3,000 mm, total width: 3,000 mm, total length: 7,000 mm, Unique opportunity: Used MTE BF-2700 fixed bed milling machine. SPECIFICATIONS - Machine length: 7000 mm - Machine width: 3000 mm - Machine height: 3000 mm CONTROL UNIT - Model: TNC 410 - Brand: HEIDENHAIN Dcsdpfeyhnmaex Akcog MAIN DRIVE - Spindle speed range: 3000 rpm - Taper: SK 50 TRAVELS - X-axis travel: 2500 mm - Y-axis travel: 1000 mm - Z-axis travel: 1000 mm WORKTABLE - External length: 2700 mm - External width: 1000 mm - Power consumption: 40 kW Year: 2001

Condition: excellent (used), Year of construction: 2008, x-travel 800 mm y-travel 400 mm z-travel 500 mm Control Siemens table surface area 1270 x 320 mm spindle turning speed - stepless 0 - 6000 U/min distance spindle /table 100 - 600 mm throat 510 mm Dodpfsymqwxjx Akcjcg tool taper SK 40 weight of the machine ca. 2,7 t dimensions of the machine ca. 2,2 x 2,0 x 2,5 m

Year of construction: 2018, condition: used, machine/vehicle number: 11261804002, Swing over cross slide approx. 146 mm; center distance approx. 600 mm, turning diameter approx. 350 mm, max. spindle speed approx. 3,500 rpm, spindle speed (min.): approx. 30 - 3,500 rpm, travel X/Y/Z approx. 185/185/540 mm, spindle taper: MT 3 Dedpfxsyztdro Akcjcg

Year of construction: 1998, condition: used, ID No.: F40205, T-slot clamping table: approx. 4,200 x 960 mm; HEIDENHAIN control; chip conveyor KNOLL 200 S-1/50, year of manufacture: 1997, serial no.: 33897; belt filter KNOLL VRF 150, year of manufacture: 1998; hydraulic unit; control cabinet; cooling system BKW DL32V/4519-1KKSRZP, total machine length: approx. 10 linear meters. Dcedpeyzthqofx Akceg

Condition: used, Year of construction: 2008, operating hours: 16,772 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, position of the milling head: Automatico 2,5ºx2,5º, spindle speed (max.): 4,000 rpm, table width: 1,000 mm, table load: 10,000 kg, table length: 4,200 mm, total height: 4,000 mm, total width: 3,500 mm, total length: 10,000 mm, overall weight: 21,900 kg, Milling machine LAGUN GBM42 Dodpfx Akoyiu Rnscjcg

Condition: new, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, spindle speed (max.): 6,000 rpm, table width: 1,200 mm, table load: 6,000 kg, table length: 1,600 mm, workpiece weight (max.): 6,000 kg, torque: 1,178 Nm, power: 31 kW (42.15 HP), Equipment: rotational speed infinitely variable, LAGUN BM 3RT Bed-Type Milling Center with Rotary Table – Available at Short Notice Djdpfx Akshy At Aecocg The LAGUN BM 3RT is a high-stability bed-type milling center with rotary table, designed for heavy-duty and precise machining. Ideal for single-part manufacturing as well as series production, it meets the highest demands for rigidity, accuracy, and reliability — without the need for elaborate foundation works. Your advantages at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly from JMT ✔ Lease purchase / financing available ✔ No special foundation required (standard industrial floor is sufficient) ✔ 24-month warranty Why choose LAGUN: LAGUN is one of Spain’s leading machine tool manufacturers (MAHER HOLDING), known for robust construction, high dynamics, and decades of experience in building bed-type milling machines. The machines stand out for their exceptional reliability, ease of maintenance, and economical operation. Technical features: Control System: HEIDENHAIN TNC 7 CNC path control + 19" TFT display HEIDENHAIN motors, measuring systems, and electronic handwheel HR-510 Cooling: Internal coolant supply (ICS) 36 bar Tool Changer: 40-position chain magazine with double gripper Chip Removal: Double hinged belt conveyor (front and rear) Enclosure: Full enclosure (perimetric) Accuracies: Positioning accuracy: ± 0.015 mm Repeatability: ± 0.008 mm Your benefits with JMT: ✔ Official LAGUN distributor in Germany ✔ On-site technical support & service ✔ Fast spare parts supply ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we’ll be happy to advise you and provide an individual quotation

Condition: new, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, spindle speed (max.): 6,000 rpm, table width: 1,100 mm, table load: 10,000 kg, table length: 3,100 mm, overall weight: 27,000 kg, torque: 1,178 Nm, spindle motor power: 53 W, Equipment: rotational speed infinitely variable, LAGUN BM 3 C Bed Type Milling Center with Integrated Rotary Table – Available at Short Notice The LAGUN BM 3 C is a high-stability bed type milling center with integrated rotary table, ideal for heavy-duty and precise machining tasks. Perfectly suited for single-part and series production where maximum rigidity, accuracy, and reliability are required—all without the need for extensive foundation work. Your advantages at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts supplied directly via JMT ✔ Leasing / financing options available ✔ No special foundation required (standard industrial flooring is sufficient) ✔ 24 months warranty Why choose LAGUN: LAGUN is one of Spain's leading machine tool manufacturers (MAHER HOLDING), renowned for robust construction, high dynamics, and decades of expertise in building bed type milling machines. These machines stand out for their high reliability, straightforward maintenance, and cost-effective operation. Technical Specification: Control System: HEIDENHAIN TNC 7 CNC path control + 19" TFT display HEIDENHAIN motors, measuring systems, and HR-510 electronic handwheel Integrated Rotary Table: Ø 1,100 mm Cooling: Internal coolant supply (IKZ) 36 bar Tool Changer: 40-position chain magazine with double gripper Chip Removal: Double hinged belt conveyors (front and rear) Enclosure: Full perimetric enclosure Accuracies: Positioning accuracy: ± 0.015 mm Repeatability: ± 0.008 mm Dcjdpfx Akom Tv Iiscjg Your advantages with JMT: ✔ Official LAGUN distributor in Germany ✔ On-site technical support and service ✔ Fast spare part supply ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we will be happy to advise you and provide a tailored quotation.