Used Grinding Technology for sale (28,361)

Condition: good (used), Grinding machine, drill sharpener, drill grinding machine, drill sharpening device Psdpfjzhl A Dox Aahjpu -Manufacturer: LLC, Drill grinding machine type Drill Doctor 750XI -Grinding range: approx. 2.5 mm - 19.0 mm -Apex angle: 118° - 140° -Voltage: 230V 50Hz -Speed: 14000 rpm -Sanding roller: Ø 23.3 mm -Case dimensions: 350/290/H145 mm -Weight: 2.7 kg

Condition: good (used), functionality: fully functional, total length: 1,300 mm, total height: 1,800 mm, total width: 800 mm, center height: 150 mm, overall weight: 700 kg, HENNINGER ZS 160 centre grinding machine Ppodeyvtmispfx Aaheu - Centre distance: approx. 800 mm Note: The item must be collected on a binding basis between 12.05. and 22.05.2026, on a date yet to be coordinated. FCA D-74821 Mosbach – loaded onto truck

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Ppodpfxovvkips Aahou

Condition: used, Year of construction: 2022, Oscillating cylinder grinding machine – technical specifications: A possible screwed version for spindle sleeve clamping. Something similar to the ProLoc device is used. Storage location: Nattheim. Ppsdpfx Aowhqprjahsu

Condition: used, Year of construction: 2022, Oscillating cylinder sanding machine, technical specifications: A possible screw variant for spindle sleeve clamping. Something similar to a ProLoc device is used. Storage location: Nattheim Pedpfx Aewhqpleahopu

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 804, We offer this used Sumitomo NPG-2×1000 gear grinding machine, year of manufacture 1996. Ppsdpjzgqzcefx Aahju Model: NPG-2×1000 Serial number: 804 Manufacturing year: 1996 Manufacturing month: 7 month If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2017, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Year of manuf. : 2017 Control : Siemens 840 Dsl Grinding length : 1000 mm In General: Year of manufacture:2017 Control system:Siemens 840 Dsl Centre height:180 mm Centre distance:1,000 mm Maximum workpiece weight:150 kg X-Axis: Technology:Electromechanical Transverse speed:0.001 – 8,000 mm/min Measuring system:Direct, 0.0005 mm (glass scale) Guideway:Hydrostatic Z-Axis: Technology:Electromechanical Table speed:0.01 – 12,000 mm/min Measuring system:Direct, 0.0005 mm (glass scale) B-Axis: Ppedpfjzhdybjx Aaheu Technology:Continuously swivelling axis Resolution:0.001° Clamping:Hydropneumatic Workpiece spindle: Power:2.0 kW Speed:0–600 rpm Chuck:MK 5 and KK 5 C-axis:0.001° Grinding spindle: Disc configuration:left/right Power:9 kW Speed:1,400 rpm Internal grinding spindle: Power:2.2 kW Speed:60,000 rpm Tail stock: Quill stroke:40 mm Mounting:MK 4 Quill retraction:Hydraulic Cylinder fine adjustment:Yes Equipment: Coolant supply:Coolant system with filter Emulsion mist separator:Mechanical Grinding wheel dresser:Diamond dressing tile Technology option I:Cone grinding Technology option II:Out-of-round grinding Balancing system:Automatic Grinding detection:Via structure-borne sound Workpiece measurement:Linear encoder Accessories:Various flanges, discs and mandrels

Condition: used, Year of construction: 1974, mechanical ja centre distance 2000 mm weight of the machine ca. 7,9 t Psdpfx Aajy Ty Rishjpu

Condition: used, Year of construction: 1970, mechanical ja centre distance 2000 mm weight of the machine ca. 7,9 t Ppsdpfjy Ty N Ssx Aahsu

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, 2x grinding supports – swivelable Podozhbarepfx Aahopu 2x diamond surfacing cutters Magnetic clamping plate from SAV 2004 control system update R&D control system

Condition: used, Year of construction: 2026, distributed throughout the property, predominantly ceiling-mounted, with various roller conveyors, conveyor belts, inclined conveyors, switches, receiving and delivery stations, various drive motors, support elements, and control cabinets, predominantly in stainless steel, extensive stock of stainless steel roller conveyors. Ppedpezhaznefx Aahju

Year of construction: 2016, operating hours: 16,568 h, condition: used, machine/vehicle number: 84037, Travel ranges (X/Y/Z): 800x500x400 mm, weight: 5,300 kg, with magnetic clamping plate, approximately 80x40 cm. Ppodpezhaz Isfx Aahju

Condition: ready for operation (used), functionality: fully functional, Internal article number: 26068 Surface grinding machine ABA FF350 / 22 + Magnetic clamping plate (350 x 150) + Digital display on the Y-axis + Surfacing device + 3 grinding wheel flanges Grinding length: 350 mm Grinding width: 225 mm Workpiece height: max. 315 mm Table size: 350 x 150 mm Pjdpfx Aszhadvoahepu Table longitudinal travel: 400 mm Table feed rate: 3-22 mm/min Total power consumption: 2.75 kW Dimensions (L x W x H): 190 x 190 x 185 cm (measured including the control cabinet + unit and coolant tank) Weight: approx. 800 kg The machine comes from an educational institution and is in good condition. You are welcome to inspect the machine while it is powered on, in our heated storage area of over 500 m².

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Technical details grinding length 800 mm grinding width 400 mm workpiece height 375 mm weight of the machine ca. 3,5 t Additional information CNC Precision Surface and Profile Grinding Machine This machine is ideally suited for precision applications in tool and mold making. Technical Details: Grinding surface: 800 x 450 mm Grinding area: 800 x 400 x 375 mm Table load (max.): 700 kg X-axis = Longitudinal movement of worktable Table longitudinal stroke: 20 - 850 mm Table drive: Electromechanical with toothed belt drive Table speed: 5 - 35,000 mm/min Table setup: Electric handwheel and direction push button Y-axis = Vertical movement Distance from table to spindle center: 140 - 525 mm Vertical drive: Electromechanical with ball screw Vertical speed: 50 - 2,000 mm/min Vertical adjustment via electric handwheel and direction pushbuttons Minimum infeed 0.001 mm Measuring system: glass scale Z-axis = Transverse movement Maximum transverse travel 400 mm Drive type: electromechanical with ball screw Transverse speed 50 - 2000 mm/min Transverse travel adjustment via electric handwheel and direction pushbuttons Measuring system: glass scale C-axis = Grinding spindle Grinding spindle motor 7 kW Grinding spindle speed 1400 rpm Grinding wheel standard 300 x 50 x 76.2 mm Spindle bearing: Precision roller bearing Lubrication: Lifetime lubrication Connected load: approx. 19 kVA Total weight: 3500 kg Equipment: - Electro-permanent magnetic chuck Clamping surface 800 x 400 mm, Pole spacing 18 mm, with 16-stage holding force control and automatic Magnetic pole reversal for demagnetization - Leveling blocks For setting up and leveling the machine - Grinding wheels and two flanges - Partial enclosure Open at the top for loading with a sliding door - Dressing system Consisting of a holder for a prism arm or fork dresser Practicle arm for single-point diamond (MK O) or shaped diamond - Grinding spindle speed control Peripheral speed 10-32 m/s The peripheral speed of the grinding wheel is kept constant (V-constant control) with a 7 kW grinding spindle motor - Universal paper belt filter unit UPF 100 Tank capacity approx. 280 liters, Ppjdpfxezg Udhj Aahju Pump capacity 20 liters/minute at 1.5 bar - Air purifier Flow rate approx. 1000 m³/h - Compressed air ports For easier removal of large workpieces with a manual compressed air valve in the machine's work area. - Mobile balancing unit With optical operator guidance for dynamic balancing of the grinding wheel directly in the machine. Imbalance size and position are calculated automatically. With transport case. - Cleaning set Hand-held impulse nozzle for cleaning the work area - Documentation/Manual For sale is our reliably operating grinding machine from mold making. The machine was purchased new in 2016 and is in good technical condition, having been used for a maximum of 20 hours per week. It runs perfectly and is being sold solely due to an investment in a larger model.

Condition: good (used), Year of construction: 1995, functionality: fully functional, Technical details internal diameter 800 mm grinding depth 500 mm swing diameter 850 mm weight of the machine ca. 6,4 t Pedpfxezg Twtj Aahspu Additional information Used internal cylindrical grinding machine with face grinding device in special design with enlarged swing diameter and extended, hydraulic transverse movement Reconstructed and modernized 1995 in the Glauchau manufacturer’s plant, put into operation 1996 1. TECHNICAL DATA 1.1 Working area Grinding diameter in the workpiece guard internal grinding, min./max. mm 30/630(800) External grinding, max. mm 800 Grinding depth, up to approx. mm 500 Table stroke mm 800 Workpiece diameter, max. mm 800 Swing diameter in workpiece protection, max. mm 800 Without workpiece protection, approx. mm 850 Distance from workpiece spindle head to grinding spindle carrier, max. mm 1225 Adjustment of the internal grinding device on the table, max. mm 545 1.2 Workpiece headstock Cross shift, max. mm 650 Cross adjustment via gear motor and positioning device with HEIDENHAIN digital position display Swivel, max. degrees 15 Workpiece spindle Speeds rpm 16/22/32/ 45/63/90/ 125/18/250 Load capacity, max 1000 Spindle head (with bayonet flange) DIN 55021 size 11 Machine accessories: 2-axis digital displays made by HEIDENHAIN Coolant system with magnetic separator Fixators (machine shoes) Various grinding wheels Diamond dresser Large face plate Internal and face grinding device Halogen machine lamp Machine documentation

Condition: good (used), Year of construction: 1992, functionality: fully functional, Technical details workpiece diameter 1000 mm workpiece weight - kg workpiece height - mm grinding wheel motor 11 kW total power requirement 25 kW weight of the machine ca. 6500 kg dimensions of the machine ca. 4100 x 3200 x 2600 mm Additional information Machine comes from a plant closure Equipment: Coolant system 500 liters with paper belt filter 4 grinding stones (3 of them unused) Technical data: Rotary table diameter 800 mm Psdpfx Aaezg Tvcehopu Max. distance from rotary table to grinding spindle center 850 mm Grinding wheel diameter 400 mm Grinding wheel width 80 mm

Condition: ready for operation (used), Tool grinder, tool sharpener, drill sharpener, Schanbacher S3-50 Psdpfjx Dbltsx Aahopu Manufacturer: Schanbacher Type: S3-50 Year: 2012 Dimensions: 460 × 600 × 1260 mm Drill diameter: 3–50 mm; Point angle: 90°–140° Includes: Protective cover, dust extraction system

Condition: ready for operation (used), - USED - SURFACE GRINDING MACHINE MAX GRINDING LENGTH: 1015 mm MAX GRINDING WIDTH: 405 mm MAX GRINDING HEIGTH: 350 mm MAGNETIC CHUCK: 400 x 1000 mm Psdpfx Aash St Dqehepu GRINDING WHEEL SIZE: 50 x 127 x 350 mm MOTOR POWER: 3,7 kW WEIGHT: 3600 Kg OVERALL DIMENSIONS: 3500 x 1700 x 2000 mm ACCESSORIES: DRESSING TOOL

Condition: used, Year of construction: 2019, functionality: fully functional, type of input current: three-phase, overall weight: 255 kg, table load: 200 kg, A downdraft table combines a workbench with an extraction/filtration system. Fumes and dust are extracted through the tabletop and rear panel and filtered by filters mounted in the table structure. The table can be placed in any location, at any welding or grinding station. The three-stage spark separator enhances safety and meets the most stringent international guidelines for fumes and dust. The DraftMax Ultra features an automatic filter cleaning mechanism that is activated when the fan is turned off (offline cleaning) or when the pressure difference before the filter exceeds a certain value. The presence of compressed air is continuously monitored. Furthermore, an automatic start/stop device can be added to the DraftMax Ultra, providing even easier operation. This is the ideal table for very high-intensity welding or grinding applications. Work surface dimensions: 1366 mm x 750 mm Weight: 255 kg Noise level: 74 dB Supply voltage: 400 V/3~/50 Hz Motor power: 2.2 kW Flow rate: 2500 m³/h Filtration area: 2 x 26 m2 Filtration efficiency: >99.9% (filter class: M) Additional LED lighting Ppsdjzg Efvspfx Aahju Stock number: 1142

Condition: good (used), Year of construction: 1972, Slideway grinding machine WMW SFBZ 2200/6000 Manufactured by WMW Germany in 1972 Ppedew U A Rmspfx Aahju Main technical data: Table size: 2240x6000 mm Max. grinding width: 2200 mm Max. grinding length: 6000 mm Max. grinding height: 2000 mm Max. workpiece weight: 15000 kg Machine weight: 130 tons The machine underwent a general overhaul in 2022. The feed boxes with electromagnetic couplings were replaced with motors and gearboxes for both heads. The bearings for the universal grinding head were also replaced. For more information, please contact us.

Condition: good (used), Year of construction: 2003, Ref. -No.: 10618 Manufacturer: KELLENBERGER Type: 600 U Nr. 33 Year of construction: 2003 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175 - 250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0 - 5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 1500 / 1700 / 2200 / 3600 Swiveling grinding wheel head: 360 ° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Micro-corrector of the feed, 1 division of the dial: 0,001 mm / Ø Working speeds continuously adjustable (normal / special): 20-400 / 10-400 Max. Grinding length: 900 mm Pjdpfeya Dagox Aahspu Further information: The machine can be viewed while powered up.

Condition: good (used), Year of construction: 1990, Ref. -No.: 10301 Manufacturer: TITAN Type: RU 350 x 1-1500 Year of construction: 1990 Type of control: Konventionell Storage location: Halberstadt Country of origin: USA Podpfx Asycpv Sjahjpu Max. Grinding length: 1.500 mm Max. Workpiece Weight: 300 kg Grinding Diameter: 350 mm Max. Dia. Of Grinding Wheel: 280-500 mm Grinding Wheel Width: 80-100 mm

Condition: used, Year of construction: 1998, machine/vehicle number: ECO6828/60-01, Machine control ASYST MS 400-, grinding wheel diameter 250 mm, max. grinding length approx. 1000 mm, with coolant device, fleece filter system and extraction unit. Psdpfx Aoy Sqh Ajahjpu

Condition: used, Year of construction: 2004, machine/vehicle number: 7202, CNC control FANUC POWER MATE, workpiece conveyor belt, fleece filter system, and HYFRA cooling system Ppedpfxsy Sqhve Aahju

Year of construction: 1989, condition: used, machine/vehicle number: 73903, comprising: KOENIG & BAUER rough grinding machine, year 1977, serial no. 73903 and KOENIG & BAUER finish grinding machine, year 1989, serial no. 720500007, with electric workpiece feeding and loading system, BEKA UPE central lubrication system Podsy Sqh Njpfx Aahspu