Used Grinding Machine For Chisel for sale (66,303)

Condition: excellent (used), Year of construction: 1980, Karstens K11 1000 This Karstens K11 comes from a university environment and was only used very sparingly. All cables and hoses in the wet area have been replaced. It has extremely low operating hours. As we specialize in Karstens cylindrical grinding machines, we can offer you full service (electrical and mechanical) for the machine after purchase. Technical Data: Centre distance: 1000 mm Centre height: 180 mm Workpiece weight: 70 kg (between centers, cantilevered), 250 kg (between centers) Grinding wheel diameter: 400 mm Workpiece spindle: Morse Taper 4, infinitely variable speed 30–450 rpm, swiveling range 0–90° Tailstock: Morse Taper 4, quill stroke 45 mm Tailstock rest beside Z-axis table Quill force: 200–600 N Table swivel: 12.5 degrees Travel of infeed spindle: 80 mm Rapid traverse: 50 mm Cjdpfx Akjh Rit Escjgt Coarse adjustment air cushion: 280 mm External grinding spindle motor: 4 kW Internal grinding spindle motor: 2.2 kW Workpiece spindle motor: 0.55 kW Machine weight: net 3,500 kg Infeed drive by DC motor Air cushion-supported rapid adjustment of the grinding spindle headstock for fast and safe positioning at the grinding station. Separate drives for spindles for external and internal grinding. Fully automatic operation cycle, feed movement controlled via rotary switch: Rapid advance, rapid retraction, grinding mode, feed stop, mym-feed adjustment. Automatic longitudinal grinding cycle Central coolant supply for all grinding stations Workpiece headstock with infinitely adjustable drive for rotating and lockable spindle. Infeed control for longitudinal grinding and plunge grinding, settings for retraction, feed amounts, feeds, spark-out times, idle strokes. Digital readout for X-axis by Heidenhain Paper band filter unit can be offered on request. Comparable to Weiss/ EMAG/ GP-cylindrical grinders/ Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat

Condition: as good as new (ex-display), Year of construction: 2026, Karstens K11 1000 Premium Retrofit Cylindrical Grinding Machine Manufacturer: Karstens Technical specifications: Centre distance: 1100 mm Centre height: 180 mm (250 mm optional) Workpiece weight: 100 kg between centres (unsupported), 300 kg between centres Grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) Cgedpfx Aeiv Au Eokcet Workpiece spindle: MT 4, infinitely variable speed control 30–450 rpm, swivelling range 0–90° Tailstock: MT4, quill stroke 45 mm Quill force: 200–600 N manually, (up to 2500 N adjustable, option) Table swivel: 10° Cross slide travel: 80 mm Rapid traverse: 50 mm Coarse adjustment (air cushion): 280 mm External grinding spindle motor: 4 kW (5.5 kW optional) Infinitely variable grinding wheel speed adjustment via potentiometer Internal grinding spindle motor: 2.2 kW Workpiece spindle motor: 1.1 kW Hydraulic motor: 1.5 kW Lubrication motor: 0.1 kW Hydraulic tank: 80 litres Net machine weight: 3,800 kg Infeed drive via DC motor Air cushion-supported rapid adjustment of the grinding spindle head for fast and safe positioning to the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic operation, infeed movements controlled via rotary selector switch: rapid advance, rapid return, grinding mode, infeed stop, micrometre infeed. Automatic longitudinal grinding cycle Central coolant supply to all grinding points Workpiece headstock with infinitely variable drive for rotating and lockable spindle. New digital infeed control with Siemens panel and Siemens PLC for traverse and plunge grinding; input for retraction, infeed amounts, feed rates, spark-out times, idle strokes; compatible with the original Karstens infeed control; with coloured Siemens touchscreen; HEIDENHAIN scales in X and Z axes. Comparable to Weiss/EMAG/GP cylindrical grinding machines/Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat /Bahmüller/Fortuna

Condition: new, We offer you spare parts of all kinds for your conventional or CNC Karstens / EMAG WEISS / GP cylindrical grinding machine—covering your tailstock, workpiece headstock, grinding spindle headstock, ball screw spindles, glass scales, grinding wheel flanges, drive motors, axis drives (BOSCH SIEMENS), ECKELMANN controls, bellows, bearings, K11/K21 infeed controls (new and used), as well as Z-axis reversing blocks for exchange. We service machines from year of manufacture 1955 onwards: ASA-ASE-K10-K11-K12-K13-K16-K19-K21-K22-K23-K24-K25-K26-K27-K28- K29-K33-K35-K37-K50-K51-K52-K53-K57-W11-W21-GP cylindrical grinding machines—all assemblies based on Karstens design. Comparable/ EMAG-WEISS/ GP cylindrical grinding machines/ Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat. Cjdpfx Asup Aikekcogt

Condition: as good as new (ex-display), Year of construction: 2026, Center height: 181 mm Center distance: 650 mm Maximum grindable workpiece diameter: 360 mm Max. load (overhung): 1000 N / 100 kg Max. load (between centers): 3000 N / 300 kg Z-axis Table swivel angle: 10° Table drive hydraulic: 0–4 m/min X-axis Cross slide travel: 80 mm Rapid traverse (hydraulic): 50 mm Coarse positioning—air cushion: 280 mm Infeed drive via DC motor Rapid feed rate: 48 mm/min/Ø Infeed process: Plunge / Longitudinal grinding Cgsdstqf Sqepfx Akcet 4 pre-selectable feed rates: mm/min/Ø 0.01–48 4 pre-selectable infeed increments: mm/ 0.001–0.1 Spark-out during end stop grinding: s 0–99 / 0–99 strokes Jog infeed: mm/Ø 0.001 Grinding spindle headstock—universal, swiveling: degrees 0–180 Grinding wheel (external): D x width x bore mm 500x100x127 or 203.2 Grinding wheel (face, option): D mm 250x32x76.2 Grinding wheel (internal, option): D mm (2–250) Drive power (external, face): kW 5.5 (7.5) Drive power (internal): kW 2.2 Peripheral speed (external): m/s 35 (50) Grinding wheel wear (external): mm/Ø 160 Wheel guard width: mm 100 Grinding spindle diameter: mm 60 Internal spindle mount: mm 80 (100) Workpiece headstock: Infinitely variable drive, MK 4: 1/min 30–270/ 50–450 Workpiece spindle lockable Spindle mount: mm MK 4/24 Spindle nose for flange mounting: MK 4 mm cylindrical Ø63H6 x 6 Workpiece headstock swivels on the rotary part: degrees 0–90 Tailstock: Quill mount / quill diameter: mm MK 4/750 Quill stroke mm: 45 Quill force N: 100–800 / 250–1400, adjustable Quill actuation: manual (foot switch) Quill fine adjustment: ±40μm Connections: Total power requirement of the machine: kW 6.5–10 Grinding spindle headstock: kW 5.5 (7.5) Workpiece headstock: kW 0.55 (1.1) Coolant cleaning: kW 0.75–2.2 Guideway lubrication pump: kW 0.1 Hydraulic pump: kW 1.5 Hydraulic tank: liters 80 Pneumatics: bar 6 Similar to Weiss/ EMAG/ GP cylindrical grinding machines/ Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat/ Bahmüller/ Fortuna

Condition: refurbished (used), Year of construction: 2026, Karstens K11 1000 Full Equipment The cylindrical grinding machine has been completely overhauled by PS-Karstens. The machine has been tested and is in very good condition. Since we specialize in Karstens cylindrical grinding machines, we can offer you comprehensive service (both electrical and mechanical) for the machine after purchase. Technical Data: Centre distance: 1000 mm Centre height: 180 mm Workpiece weight: 100 kg (unsupported), 250 kg (between centers) Grinding wheel diameter: 400 mm Workpiece spindle: MT 4, steplessly adjustable speed 30–450 rpm, swiveling range 0 - 90° Tailstock: MT4, quill stroke 45 mm, fine adjustment for the quill Quill force: 200-600 N, hydraulically operated via foot pedal Table swivel angle: 10 degrees Infeed spindle travel: 80 mm Rapid traverse travel: 50 mm Coarse adjustment with air cushion: 280 mm External grinding spindle motor: 4 kW Internal grinding spindle motor: 2.2 kW Workpiece spindle motor: 0.55 kW Machine weight: net 3,800 kg Infeed drive by DC motor Air cushion assisted rapid adjustment of the grinding spindle headstock for fast and safe positioning of the grinding position. Separate drive for spindles for external and internal grinding. Fully automatic operation cycle, infeed motion via star dial switch: Rapid approach, rapid return, grinding mode, infeed stop, micron infeed. Automatic longitudinal grinding cycle Central coolant supply to all grinding positions Cjdpfxjh Riwds Akcegt Workpiece headstock with steplessly adjustable drive for live and lockable spindle operations. Infeed control for longitudinal and plunge grinding, input for retraction, infeed amounts, feeds, spark-out times, empty strokes Digital readouts for grinding spindle B-axis, workpiece spindle, X and Z axes from HEIDENHAIN Paper band filter unit approx. 250 L Similar to Weiss / EMAG / GP cylindrical grinders / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat / Bahmüller / Fortuna

Condition: new, We offer all types of spare parts for your conventional or CNC Karstens/GP cylindrical grinding machine, including components for your tailstock, workpiece spindle head, grinding spindle head, ball screws, glass scales, grinding wheel flanges, drive motors, axis drives (BOSCH SIEMENS), bellows, bearings, K11/K21 infeed control systems—new and used—as well as reversing blocks for the Z axis on an exchange basis. Also suitable for similar Weiss/EMAG/GP cylindrical grinding machines, Studer, Kellenberger, Schaudt, Tschudin, Tacchella, Dannobat, Bahmüller, Fortuna. Cgodpfx Aeraibvjkcst

Condition: refurbished (used), Year of construction: 2026, Karstens K11 650 The cylindrical grinding machine has been completely overhauled by PS-Karstens. The machine has been tested and is in very good condition. As specialists in Karstens cylindrical grinding machines, we can provide you with complete service (electrical and mechanical) for the machine after purchase. Technical Data: Csdpfxjh Rixxs Akcsgt Centre distance: 650 mm Centre height: 180 mm Workpiece weight: 100 kg (between centers), 250 kg (supported) Grinding wheel diameter: 400 mm Workpiece spindle: Morse taper 4, infinitely variable speed 30–450 rpm, swiveling range 0–90° Tailstock: MT4, quill stroke 45 mm, micrometer adjustment Quill force: 200–600 N, hydraulically operated via foot pedal Table swiveling: 10 degrees Feed spindle adjustment range: 80 mm Rapid traverse: 50 mm Rough adjustment with air cushion: 280 mm External grinding spindle motor: 4 kW Internal grinding spindle motor: 2.2 kW Workpiece spindle motor: 0.55 kW Machine weight: net 3,800 kg Feed drive by DC motor Air-cushion-assisted rapid adjustment of the grinding spindle stock for fast and precise positioning of the grinding position. Separate drives for external and internal grinding spindles. Fully automatic operating sequence, feed movement controlled via cam switch: Rapid approach, rapid return, grinding mode, feed stop, micron feed. Automatic longitudinal grinding cycle Central coolant supply for all grinding positions Workpiece spindle head with infinitely variable drive for live and locked spindle operation. Feed control for both plunge and traverse grinding, input for retraction, feed amount, feed rates, dwell times, and idle strokes Paper band filter system approx. 250 L Comparable to Weiss/EMAG/GP cylindrical grinding machines/Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat /Bahmüller/Fortuna

Condition: as good as new (ex-display), Year of construction: 2026, Karstens K11 1000 Premium Retrofit Cylindrical Grinding Machine Manufacturer: Karstens Technical Data: Centre distance: 1100 mm Centre height: 180 mm / (250 mm optional) Workpiece weight: 100 kg between centres, 300 kg with support Grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) Workpiece spindle: MT 4, infinitely variable speed from 30-450 rpm, swivel range 0 - 90° Tailstock: MT4, quill stroke 45 mm Quill force: 200-600 N manual, (up to 2500 N adjustable = optional) Table swivel: 10 degrees Infeed spindle travel: 80 mm Rapid traverse: 50 mm Coarse adjustment with air cushion: 280 mm External grinding spindle motor: 4 kW / (5.5 kW = option) Infinitely variable speed adjustment of grinding wheel via potentiometer Internal grinding spindle motor: 2.2 kW Cgedeh Rimmspfx Akcjt Workpiece spindle motor: 1.1 kW Hydraulic motor: 1.5 kW Lubrication motor: 0.1 kW Hydraulic tank: 80 litres Net machine weight: 3800 kg Infeed drive via DC motor Air cushion-supported rapid adjustable grinding spindle stock for fast and safe positioning to grinding location. Separate drive for spindles for external and internal grinding. Fully automatic operating sequence, infeed movement via rotary dial switch: Rapid approach, rapid return, grinding operation, infeed stop, mym-infeed. Automatic longitudinal grinding cycle Central coolant supply for all grinding zones Workpiece headstock with infinitely variable drive for both live and lockable spindle operation. New digital infeed control with Siemens panel and Siemens PLC for longitudinal grinding and plunge grinding, inputs for retraction, infeed amounts, feed rates, spark-out times, dwell strokes; compatible with the old Karstens infeed control; with colour Siemens touch panel. Similar to Weiss/ EMAG/ GP cylindrical grinders/ Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat/ Bahmüller / Fortuna

Condition: as good as new (ex-display), Year of construction: 2026, Centre height: 181 mm Centre distance: 1000 mm Maximum grindable workpiece diameter: 360 mm Max load cantilevered: 1000 N (100 kg) Max load between centres: 3000 N (300 kg) Z-axis: Table swivel angle: 10° Table drive, hydraulic: 0–4 m/min X-axis: Cross slide travel: 80 mm Rapid traverse (hydraulic): 50 mm Coarse adjustment – air cushion: 280 mm Infeed drive by DC motor Rapid infeed speed: 48 mm/min/Ø Infeed cycle: Plunge grinding / Longitudinal grinding 4 preselectable speeds: mm/min/Ø: 0.01–48 4 preselectable infeed increments: mm: 0.001–0.1 Automatic shut-off during stop-grinding: 0–99 s or 0–99 strokes Stepwise infeed: mm/Ø: 0.001 Grinding headstock universal, swivelling: 0–180° Grinding wheel (OD): D x width x bore: 500 x 100 x 127 mm or 203.2 mm Grinding wheel (face, option) D: 250 x 32 x 76.2 mm Grinding wheel (ID, option) D: 2–250 mm Csdpotqf Rzofx Akcjgt Drive power, external/face: 5.5 (7.5) kW Drive power, internal: 2.2 kW Peripheral speed, external: 35 (50) m/s Grinding wheel wear (OD): mm/Ø: 160 Guard width: 100 mm Grinding spindle diameter: 60 mm Internal spindle mounting: 80 (100) mm Workpiece headstock: Infinitely variable drive: MK 4, 1/min: 30–270 / 50–450 Workpiece spindle lockable Spindle mounting: MK 4/24 mm Spindle nose for flange attachment: MK 4, cylindrical Ø63H6 x 6 mm Headstock swivels on rotating part: 0–90° Tailstock: Quill mounting / Quill diameter: MK 4, 750 mm Quill stroke: 45 mm Quill force, N: 100–800 / 250–1400 adjustable Quill operation: manual (foot switch) Quill fine adjustment: ±40 μm Connections: Total machine connected load: 6.5–10 kW Grinding headstock: 5.5 (7.5) kW Workpiece headstock: 0.55 (1.1) kW Coolant filtration: 0.75–2.2 kW Lubrication pump – guideways: 0.1 kW Hydraulic pump: 1.5 kW Hydraulic tank: 80 l Pneumatics: 6 bar Comparable to: Weiss / EMAG / GP cylindrical grinders / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat

Condition: new, Maximum grinding length 3200 mm Work area (length*width) 3180*180 mm Grinding wheel size 200*100*32 mm (can be customized) Rail: Machine guide rail with wear-resistant strip Cooling system: Water tank with integrated water pump for spray circulation cooling Grinding precision ≤0.05 mm/m Operating voltage: 380V 50Hz Machine spindle reciprocating speed: approx. 17 m/min Cgjdpfx Akjy Hgw Aocot Grinding head drive type: Belt drive Grinding head motor power (custom grinding machine motor): 4.0 kW Traverse motor power: 0.75 kW Water pump power: 0.125 kW Total power: approx. 5.5 kW Total weight: approx. 2800 kg Overall dimensions: 5350*1300*1300 mm CE certified

Condition: excellent (used), Year of construction: 2014, functionality: unexamined, workpiece weight (max.): 2,500 kg, total width: 3,200 mm, total length: 15,800 mm, distance between centers: 6,000 mm, workpiece diameter between centers: 850 mm, overall weight: 19,000 kg, We offer this very good Hol-Monta spol.sro UB 85 / 6000 CNC cylindrical grinding machine, year of construction 2014. Model: UB 85 / 6000 CNC Control type: Kavalir K 51-2 Cedpsy Hgrgsfx Akcsgt Serial number: H 214 09 005 Swing dia. 850 mm Center distance 6 000 mm Internal Grinding attachment Steadyrests etc.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Weinig Rondamat 980 Year 2010 Technical data: Max. tool width: 330 mm With PowerLock: 322 mm Tool flight circle: 100 - 300 mm With PowerLock (optional): 100 - 250 mm Grinding wheel diameter: 125 - 200 mm Spindle speed frequency-controlled: 1500 - 4600 rpm Cgodpfx Ajwvvylokcet Grinding spindle drive: 1.5 kW

Condition: used, Year of construction: 2010, functionality: unexamined, Weinig RS 2000 Csdewmw Daspfx Akcsgt

Condition: used, Sharpening machine for profile cutters and straight grinders. . Grinding interlocked in 2 axes. Very easy to operate. Width of the tool max: 360mm Cgsdpjnzkx Sefx Akcot Maximum cutting circle 350mm profile 300mm straight Minimum cutting circle 70mm Main motor power kW: 1.5 at 3000 rpm at 50 Hz. Wet grinding: Yes

Condition: new, Eurotec Innovation TV45 – Trough Vibrator / Vibratory Finishing Machine (Made in Germany) The TV45 trough vibrator by Eurotec Innovation is a powerful and versatile vibratory finishing machine for professional surface finishing applications. The machine stands out due to its robust construction, high efficiency, and universal range of applications. Machine type: Trough Vibrator TV45 Shown: TV45 incl. sound enclosure and WS25 for part separation Manufacturer: Eurotec Innovation GmbH Thanks to the U-shaped working bowl, even larger and longer workpieces can be processed efficiently – while maintaining a compact design. The vibration motor mounted directly beneath the working bowl ensures highly efficient energy transfer and consistent finishing results. 🔧 Technical Data: Gross volume: approx. 115 liters Internal dimensions of working bowl: Length: 850 mm Width: 380 mm Height: 395 mm Rated speed: 1500 rpm Power supply: 400V – 16A – 50 Hz Advantages: ✔ Compact and robust design ✔ High energy efficiency due to direct vibration drive ✔ Universally suitable for various workpieces ✔ Deflection edge to reduce part adhesion ✔ Low-maintenance vibration motor ✔ Optionally available with sound enclosure and separation systems 🏭 Applications: Deburring, smoothing, and polishing Descaling, derusting, and cleaning Edge rounding Surface finishing The TV45 is an economical and high-performance solution for companies looking for a flexible vibratory finishing system for a wide range of applications – from individual parts to small batch production. The machine shown in the images includes optional accessories. The listed price refers to the base machine (TV45). A suitable electrical control unit is required for operation. Additional variants and custom configurations are available upon request. Cgsdpfxef Sqdts Akcot From development to production, we provide all products from a single source – all “Made in Germany”. ----- Please feel free to contact us – we will be happy to advise you without obligation. ----- The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer is for presentation purposes only. Contract negotiations are conducted via telecommunications (email, fax, phone, messaging platforms). We will first provide you with a non-binding offer, including our general terms and conditions as well as information on the right of withdrawal and legal notice, before any purchase or contract is concluded.

Condition: reconditioned (used), functionality: fully functional, grinding wheel width: 250 mm, grinding wheel diameter: 500 mm, HERMINGHAUSEN SR4 - OVERHAULED High-precision and conventional centerless grinding machine. The machine is suitable for grinding workpieces up to 125 mm diameter. High machine and grinding stability thanks to a robust cast bed and hydrodynamic segment jaw bearing. The low construction height ensures excellent accessibility to all important functions. The machine can be quickly and easily retooled for different workpieces and materials. Feed adjustment is performed with micron-level precision via coarse and fine adjustment. The grinding gap can be easily set by swiveling the bearing angle. Grinding wheel diameter: 500 mm x width 250 mm. The machine has been disassembled, defective parts replaced, repainted, and rebuilt. It is in very good mechanical and electrical condition and is immediately ready for operation. Cgodpfsy Hf Dbjx Akcst Commissioning and training/instruction on the machine and grinding technology is available.

Condition: excellent (used), Year of construction: 1990, Max. Grinding Area: 650 x 370 mm Longitudinal Table Movement, hydraulic: 650 mm Longitudinal Table Movement, manual: 700 mm Cross Table Movement, hydraulic: 330 mm Cross Table Movement, manual: 370 mm Grinding Spindle Speed: 1450 rpm Table Speed: 5 - 25 m/min Cross Feed: 1.1 mm/min Grinding Wheel Dimensions: 355 x 50 x 127 mm Machine Dimensions (L x W x H): approx. 2700 x 1850 x 2050 mm Weight: approx. 2100 kg Accessories / Special Features: • Automatic vertical feed Cedpfx Asy D Ad Hjkcegt • As-new safety doors • Electromagnetic chuck 600 x 300 mm • Coolant system • Separate hydraulic unit • Grinding wheel with flange • Control panel on swing arm • Manual dressing device with diamond Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), Year of construction: 2001, Distance between centres: 600 mm Centre height: 180 mm Max. grinding diameter: 355 mm Min/max Z-axis feed rate: 0.01 / 15 m/min Z-axis resolution: 0.5 µm Min/max X-axis feed rate: 0.01 / 10 m/min X-axis resolution: 0.5 µm Grinding wheel left side: 500 x 40 x 203 mm Peripheral speed of grinding wheel: 45 m/sec External grinding spindle drive power: 10 kW Cedsy Dz R Sopfx Akcogt Workpiece spindle speed: 0-1000 rpm Workpiece headstock taper: MK 5 Tailstock centre taper: MK 4 Cylindricity adjustment: +10 / -4 degrees CNC control: SIEMENS 840 D Total connected load: 28 kW Machine weight: 5.2 t

Condition: used, functionality: fully functional, grinding height: 256 mm, grinding length: 800 mm, grinding width: 400 mm, Wiring diagrams are available in digital format. Codpfx Aksy Hfcwjcegt

Condition: good (used), internal diameter 200 mm grinding depth 80 mm stroke of the table X= 300 mm stroke of the table Y= 500 mm control FANUC 18i-TA total power requirement 7 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 2,950x2,330x1,640 m O K A M O T O High-Precision Internal Cylindrical Grinding Machine with FANUC CNC Control, System 21 i – TA, 2-Axis Simultaneous Machining For machining bores, end faces, and outer diameters in a single setup TECHNICAL DATA Internal grinding diameter: (6) - 100 mm Grinding depth approx.: 80 mm Max. table stroke: X-axis 300 mm Z-axis 500 mm Swing diameter over table: 600 mm Swing diameter in chuck cover: 260 mm Table speed: (X/Z-axis) 0.1 - 10,000 mm/min Swivel angle of workpiece spindle: -5 to +15 degrees Smallest input increment: X-axis 0.0001 mm Z-axis 0.0001 mm Workpiece spindle speed: 100 - 850 rpm Cgsdpfxsy Dvnre Akcjt Grinding spindle speeds: Standard (infinitely variable) up to 10,000 rpm and 20,000 rpm

Condition: used, Year of construction: 1989, MAKE GER, MADE IN SPAIN MODEL RS 10/60 YEAR TABLE LENGTH 1300.0 mm TABLE WIDTH 600.0 mm TRAVEL X AXIS: 1600.0 mm Y AXIS: 600.0 mm MAX DISTANCE (TABLE TO WHEEL) 800.0 mm MAX WORKPIECIE WEIGHT 1000 KGS GRINDING WHEEL SIZE 400.0 x 100.0 x 127.0 mm SPINDLE SPEED MAX 1500 RPM MACHINE DIMENSIONS 4600.0 x 2700 x 2600.0 mm MACHINE WEIGHT 7600 KGS PLUS ELECTROMAGNETIC CHUCK SIZE: 1000.0 X 600.0MM HYDRAULIC PACK Cgedpfey Du N Ujx Akcot COOLANT SYSTEM WHEEL MOUNTED DRESSER

Condition: used, Year of construction: 2004, Lot consists of: (1) CNC Horizontal Double-Disc Surface Grinder Technical Details: grinding wheel diameter x width 762 x 220mm, MARPOSS E3 in-process measuring system, CNC FANUC 210i-MB, 400V 50Hz 97kW, weight approx. 13 tons Cedpfxoym Tuae Akcjgt

Condition: good (used), functionality: fully functional, well-maintained tool grinder with accessories as shown in the pictures Cjdjy Hdm Ijpfx Akcsgt

Condition: good (used), Year of construction: 1970, functionality: fully functional, Data : Tip width 300 mm Cjdpjy Hdmzsfx Akcsgt Tip height 150 mm External grinding spindle 4.0 kW Grinding wheel max. 400 x 80 x 127 mm Spindle cone MK4 Workpiece headstock 0.55 kW Workpiece speeds 30 - 450 rpm Internal grinding spindle 1.5 kW

Condition: like new (used), Year of construction: 2022, functionality: fully functional, We are selling a lightly used, fully functional, and exceptionally equipped brake disc grinding machine from BUDERUS. The machine is currently still in production and can be demonstrated under power. Buderus Brake Disc Grinding Machine, Type BDG220 2A SL Technical data: - Max. workpiece diameter: 440 mm - Max. workpiece height: 150 mm - Max. swing diameter over table: 500 mm - Workpiece spindle speeds, NC programmable: 0 – 1,000 rpm Machine design: Surface grinding spindles on vertical feed axes, mounted on a horizontal travelling column; workpiece spindle mounted on a changeover table for optional parallel main time loading Workpiece dimensions: diameter up to approx. 450 mm Control: Siemens 840D Solution Line with S7-300 PLC Installation data: Weight approx. 8,500 kg, dimensions 3,000 x 2,445 x 1,980 mm, electrical connected load 42 kW (pre-fusing 80 A) Cgedpfx Aey Drh Uekcet Further details regarding the equipment and technical specifications are available with our offer.