Used Gluing Press for sale (12,795)

Condition: good (used), Year of construction: 1981, operating hours: 376 h, functionality: fully functional, machine/vehicle number: 01031, total height: 3,200 mm, total width: 1,900 mm, total length: 2,500 mm, table width: 570 mm, table length: 670 mm, overall weight: 10,000 kg, clamping force: 400 kN, input frequency: 50 Hz, input current: 25 A, power: 7.5 kW (10.20 HP), REIS TUS 600 K Coating Press - Operating voltage: 380/260 V Ijdpfozlfb Ijx Aa Esid Attention: The item must be picked up between September 8 and September 10, 2026, on a date to be confirmed. FCA D-63128 Dietzenbach - loaded onto a truck.

Condition: good (used), Year of construction: 1987, Equipment:  Pressing force: 160 kN / 16 MPa  Spindle diameter: 60 mm  Spindle pitch per revolution: 32 mm  Clearance between columns: 410 mm Iiodsy S Syaopfx Aa Eed  Max. clear height between table and ram: 270 mm  Table area: 410 x 280 mm  Weight: 335 kg Condition: good, little use

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Total press force: 16,000 kN Force application point before the PMI: 18 mm Number of strokes adjustable continuously in automatic mode: 10 - 22 1/min Slide stroke: 605 mm Slide adjustment: 400 mm Mold height (stroke downwards, adjustment upwards): 1300 mm Table dimensions: 4500 × 2300 mm Slide dimensions: 4500 × 2300 mm Table height from the ground: 600 mm Table stroke: T-Track Transfer stroke: 0 - 1200 mm Internal clearance of the guide shoulder for the clamping pins (min.): 800 mm Internal clearance of the guide shoulder for the clamping pins (max.): 2400 mm Lifting stroke: 0 - 280 mm Cushions in the base (hydraulic): 2 pcs. Positioning of both cushions: Motorized and adjustable Cushion force: 300 - 2000 kN Cushion stroke: 0 - 250 mm Cushion surface area: 1600 × 950 mm Pneumatic cushion in the slide: 2 pcs. Cushion force in the slide: 55 - 550 kN Maximum cushion stroke in the slide: 150 mm Left slide cushion surface area: 1450 × 1600 mm Right slide cushion surface area: 1300 × 1600 mm Maximum weight of the upper part of the mold: 36,000 kg Maximum total weight of the mold: 40,000 kg Technical data for the CISAM line: • Strip width: 300 - 1600 mm • Strip thickness: 0.5 - 3.0 mm • Tensile strength: 600 MPa • Yield strength: 400 MPa • Feed rate: 200 - 1300 mm Isdpfx Aaezldwue Eeid • Feed accuracy: ±0.1 mm • Maximum feed cross-section: 4,000 mm² • Strip entry height above the table: 500 - 800 mm • Maximum coil weight: 25,000 kg • Coil outer diameter: 900 - 1,855 mm • Mandrel expansion range: 500 - 610 mm • Nominal coil inner diameter: 610 mm • Straightening rollers: 9 pcs. • Straightening unit with cassette construction

Condition: used, Year of construction: 2000, Colour: Grey Veneer press continuous press gluing press plate press Colombo Iijdownhabopfx Aa Eed Machine dimensions: 4500x1300 Oil heated to a maximum of 140 degrees input/outpu t6 cylinders Solid plates 40mm - Details: - └ Description: Osama glue roller is no longer available - Year: 2000 - Documentation available: No - CE certificate present: No - Press drive: Hydraulic - Max. workpiece length [mm]: 4500 - Max. workpiece width [mm]: 1300 - Max. workpiece height [mm]: 140 - Total stroke [mm]: 140 - Number of stages [pcs]: 1 - Material of press plates: Steel - Number of cylinders [pcs]: 6 - Cylinder diameter [mm]: 120 - Heating boiler present: Yes - Heating type: Oil heated - Max. working temperature [°C]: 140 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: refurbished (used), Used, complete reconditioned, 1 year warranty, plate format 1200 x 1200 mm, 40 - 125 plates, open or closed spout, 20, 25 or 30 mm cake thickness, pressure max. 15 bar, capacity 1200 - 4500 liters, filter surface 85 - 350 m², dimensions 7000 - 13.500 x 1800 x 2400 mm, weight 10.000 - 28.000 kg, autom. plate transport, engine hydraulics, with or without filter cloths Ijdofbbqhepfx Aa Ejid

Condition: new, Year of construction: 2026, pressing force: 200 t, DHS-200 – 200 T Hydraulic Heated Press – Sliding Table – Heating Plates 800 × 800 mm For sale is a DHS-200 hydraulic heated press with a pressing force of 200 T and an extendable sliding table system. The machine features heating plates measuring 800 × 800 mm, an open height of 800 mm, as well as a hydraulic stroke of 600 mm, making it particularly suitable for laminating, molding, and thermal press processes with temperature-controlled tooling. ==== Technical Details & Information: Hydraulic Heated Press DHS-200 – 200 T ==== General Specifications - Design: Hydraulic heated press with sliding table - Pressing force: 200 T - Table usable area: 800 × 800 mm - Heating plates: 800 × 800 × 95 mm Iijdpoyuvrdsfx Aa Ejd - Open width: 900 mm - Open height: 800 mm - Extendable table: 800 mm - Table height: 900 mm - Overall dimensions (W×D×H): 2,150 × 2,050 × 2,850 mm - Total weight: approx. 9,800 kg - Machine frame: welded steel construction ==== Hydraulic Cylinder - Piston stroke: 600 mm - Piston rod Ø: 380 mm - Cylinder Ø: 180 mm - Max. operating pressure: 260 bar ==== Hydraulic Power Unit - Return speed: 22 mm/s - Idle speed: 10 mm/s - Hydraulic pump: ASC - Pump capacity: 42 l - Motor power: 7.5 kW - Hydraulic power unit: mounted beside the press - Hydraulic manifold / valves: Duplomatic - Air cooling - Adjustable pressure - Manual limit sensors - Cam switch for stroke limitation - Passive pressure maintenance for up to 60 minutes ==== Heating System - Electrically heated steel plates - Heating capacity: 27 kW - Temperature range up to 250 °C - Temperature sensors: 2 per heating plate - Temperature fluctuation: approx. 5–10 °C ==== Controls - Two-hand operation - Ram return via control button - Stroke limitation via cam switch - Pressure adjustment via control valve - CE certificate and user manual included ==== Electrical Connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Heating elements per plate: 18 units - Total heating power: 27 kW - Hydraulic motor connection: 7.5 kW - Total connected load: approx. 40 kW ===== Plastics processing, laminating processes, composite materials, rubber and elastomer processing, compression molding, thermal pressing processes, hot-pressing applications Hydraulic press, hydraulic heated press, heated press, sliding table press, 200 ton press, 200 T press, laminating press, plastics press, molding press, vulcanizing press, tryout press, tool tryout press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured in compliance with German machine directives, the European Machinery Directive (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements, as they also fully comply with the national Brazilian safety standard NR 12, which builds upon these. Our core competence is special-purpose machine construction and press automation. We offer tailor-made hydraulic presses at surprisingly affordable prices. For the hydraulics of our presses, we mainly use components from leading European manufacturers.

Year of construction: 2022, condition: new, immediately available CNC press brake YAWEI PBH160/3100-4C - Pressing force: 1600KN - max. bending length: 3100mm - Year of construction 2022 - CNC controlled hydraulic crowning Iodpfxeiwfp To Aa Eoid - Cybelec Modeva 19T controller - WILA upper tool clamp - 60mm table with 13.5mm x 22mm slot for insert dies - 2 front support arms sliding on linear guide - CE Fiessler Akas IIF light barrier - 24 months warranty - Commissioning, training

Condition: new, Year of construction: 2023, Immediately available, highly upgraded CNC press brake YAWEI PBH220/4100-7C - Pressing force: 2200KN - max. bending length: 4100mm - Year of construction 2023 - CNC controlled hydraulic crowning Iijdpjqgcq Hsfx Aa Eed - Cybelec VISITOUCH 19T control - 7 CNC controlled axes - Y1/Y2, X, R, Z1 + Z2, X1 (Delta X) - Mechanical quick clamping upper tools type Amada - 60mm table with 13.5mm x 22mm groove for insertion dies - 2 front support arms can be moved on linear guides - CE with Fiessler AKAS IIF (automatic height adjustment) - 24 month guarantee - Commissioning, training

Condition: used, Second-hand machine Fittings drilling machine Pot-hole band drilling machine, fitting drill (Grass drilling pattern) 6 drilling spindles in a row (32 mm pitch) Iiedezlbrcjpfx Aa Eed (one spindle on the 8-spindle drill head is defective) 4 additional drilling spindles positioned upstream for counterbore drilling Pneumatic hold-down devices, depth stop adjustment Connection: 16 A / 380 V Motor: 1.5 kW Weight approx. 100 kg Dimensions: 3,130 x 1,060 x 710 mm Availability: at short notice Storage location: Flörsheim

Condition: excellent (used), Year of construction: 2006, We sell the Mambranpress for kitchen doors, doors, or door frames, etc. Producer ORMA Macchine, Isdpfx Aaezmnyio Ejid Model: PM Air System 25/14 Year 2006. Area 2500 x 1400mm. / 1 Table PIN system for edge binding. Possible to see at work. Documentation included

Condition: used, Year of construction: 1995, machine/vehicle number: 1453G, functionality: fully functional, operating hours: 71,614 h, pressing force: 80 t, stroke length: 340 mm, table width: 2,550 mm, overall weight: 7,800 kg, A YouTube video demonstrating the operation is available! We are offering this used Weinbrenner GP 80-2550 press brake for sale. The control system was upgraded to a Cybelec VisiTouch Pac in 2023. The press brake is in good condition, well-maintained, and is still currently in use in production. Various components have been renewed over the years (drive motor, belts, guides, back gauge fingers, compressed air lines, etc.). The machine underwent a service by B+Z in 2026. A large amount of tooling is included. 2 upper tool sets and 1 lower tool set (3V die) have been re-ground by UKB; invoices are available. The machine has UKB adapter strips for the lower tool, allowing the use of lower tools with the Trumpf system. A laser angle measurement system from Data M Engineering (Laser Check) has been installed on the machine. Upon purchase of the machine, the buyer will receive a detailed instruction on how to operate it. The machine is being sold because we have had a second Weinbrenner with a 3m bending length for a year. This was necessary because a flatbed laser with a 3m processing length was also acquired a year ago. Since we now need the space of the old press for final assembly, it is being sold. Location: 82538 Geretsried Equipment: - Factory number: 1453G - Year of manufacture: 1995 - Working width: 2550mm - Controlled axes: Y1, Y2, X, X1, R, 2x bending aids, crowning, die shifting - Hydraulic ram clamping - Hydraulic die clamping - 2 bending aids - Control system upgrade to Cybelec VisiTouch Pac in 2023 - Weight: 7800 kg - Press force: 80 tons - Ram stroke: 340 mm If you have any questions or need more information, please feel free to send us a message or call us. Iiedjzmmwtopfx Aa Ejd

Condition: used, RICHTER 315t PRESSURE: 315 tons DAYLIGHT: 500 mm TABLE: 1500 x 1250 mm WEIGHT: 23,000 kg Ijdpfx Aezmmvisa Eeid

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, STC-Ref:G-022-7707 Heidelberg SM-52-2-P ,Year: 1999, Impressions: approx. 70 mio. format: 370x520 mm, 2 colors equipped: - Plus-version: prepared for numbering and perforating - wash device for impression cylinders - electronical double sheet control - electronical pull lay control Isdpfszcfqlsx Aa Eoid - powder sprayer Grafix - Technotrans cooling, metering unit - basedevice for perforating and slitting - Perfecting 1-1/2-0 - Lowpile Delivery - Autoplate - numbering unit - Alcolor automatic filmdamping - Cptronic - ink-roller wash device managed from console - blanket wash-up device --> available: 07/2026

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, STC-Ref:G-022-7709 Heidelberg PM-GTO-52-1, Year: 1997, Impressions: approx. 62 mio. format: 360x520 mm, 1 colors equipped: - Plus-version: prepared for numbering and perforating - numbering unit - perforating unit Iiodszcfrvjpfx Aa Eod - direct dampening (Heidelberg for GTO 52) - powder sprayer - basedevice for perforating and slitting --> available: 07/2026

Condition: as good as new (ex-display), Year of construction: 2024, New hydraulic heating plate press Manufacturer: ITALPRESSE, Type XL/6 30-13 with gold-anodized plates Touch display control - Electric heating plates, 3,000 x 1,300 mm - Total pressure: 90 tons - Number of heating plates: 2 pcs. - Number of tiers: 1 pc. - Cylinder stroke: 350 mm - Tier opening: 350 mm - All-side loading - Number of pressure cylinders: 6 pcs. - Diameter of pressure cylinders: 85 mm - Power requirement of hydraulic unit: 3 kW - Electric heating plates made of solid, hard aluminum with built-in heating wires - Heating power: 22 kW - High-pressure insulation plates - Working temperature: 90° C - Max. temperature: 120° C - Operating voltage: 400 V/50 Hz - Safety regulations according to CE standard Standard equipment: - Movement of the press table with rack and pinion and parallel guides at 2 corners of the press table, made of self-lubricating material - Electronic control unit with touch screen for controlling and monitoring the machine - Digital timer for setting the pressing time and automatic opening - Digital input and monitoring of the pressing pressure - Digital timer for setting the pressing time - Digital diagnostics and display of error messages - Safety circuit with two-hand operation - Safety pull cord - Safety bracket for the lower press table Integrated accessories: - Touch screen TS/400 - EFC Electronic flatness control - Gold-anodized heating plates (bus bars) Location: In stock at 54634 Bitburg - Immediately available - Ijdpfxsdx R Tfs Aa Eoid

Condition: excellent (used), Hess Corpus Press Type: Export, Pneumatic Manufacturer: Hess Type: Export Maximum workpiece size: 2,500 x 1,500 mm Press force: 1,400 kp pressing capacity per pressure unit at 15 bar Vertical cylinders: 2 + 2 pressure cylinders Horizontal cylinders: 2 + 2 pressure cylinders Dimensions: 3,900 mm x 2,500 mm x 600 mm Weight: 1,060 kg Hess Corpus Press Export, pneumatic 2 vertical pressure assemblies, each with 2 pressure cylinders, 80 mm cylinder diameter, 110 mm stroke, 1,400 kp pressing force per pressure unit at 15 bar 2 horizontal pressure assemblies, each with 2 pressure cylinders, 80 mm cylinder diameter, 110 mm stroke, 1,400 kp pressing force per pressure unit at 15 bar; the upper unit is easily adjustable thanks to weight compensation Pressing operation is controlled via 2 rotary slide valves with positions Press – Stop – Release Maintenance unit consisting of pressure regulator (0–15 bar), pressure gauge, and oil mist lubricator Anodized measuring scales, detachable feet Location: Ex works customer site Ijdpfsxgvwpex Aa Ejid - Immediately available -

Condition: new, Year of construction: 2026, Adhesive application machine / Adhesive roller machine Brand: ORMA/Osama Type: I/213 (S2R-1300) Working width: 1,300 mm Maximum passage height: 100 mm Speed: 18 m/min Iiedpfxed Iz Dfe Aa Eed Working height: 900 mm Diameter of application rollers: 185 mm Power rating: 0.5 Hp 0.37 KW Operating side: right Electrical system: 400 V/50 Hz/3 phases Technical features: - Structure of the adhesive application machine made of welded sheet metal. - 1 motor for driving the two rollers - Adhesive application rollers coated with acid-resistant special rubber, ground to shape and grooved, wear-resistant. - The thickness of the rubber layer can be ground to shape multiple times. - Special dampers on the roller supports, which allow automatic opening of the rollers to compensate for unevenness up to a maximum of 5 mm on the workpieces. - Adhesive dosing via a distribution trough made of zinc sheet. Easily removable for cleaning. - 1 handwheel for adjusting the roller gap - Safety guard for the rollers to prevent accidents - Electrical components according to the highest quality standard - CE standard

Year of construction: 2026, condition: new, Vacuum membrane press VPR-4000 is a universal press for woodworking and thermoforming. The VPR-4000 press is also tiltable and mobile. Iiodpjyr R Hwofx Aa Eed Applications: Veneering / Form gluing / Wrapping... Coating of various profiles (veneer, paper, plastic, etc.) Wood bending: production of curved and laminated components Vacuum system: Working surface with vacuum channels for even negative pressure, even with large workpieces. Becker vacuum pump / oil-free / tank capacity 100 l Working area: 4000 x 1500 mm Pump power: 0.75 kW Vacuum pump flow rate: 40 m³/h Rubber membrane External dimensions: 4100 x 1650 x 1000 mm Weight: 400 kg Location: Ex stock 54634 Bitburg - Free loading on truck -

Condition: new, Year of construction: 2026, Exceptional special price, as it was used at our in-house trade fair. Operating hours: 2 Immediately available – subject to prior sale. First come, first served. Compact design, high reliability, and excellent value for money: these are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, polystyrene, foams, or paper. A special feature is the screw pre-compaction, which guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. Overall dimensions: 1900 x 1410 mm Hopper opening: 1044x1044 mm Hopper height: 1010 mm Hopper volume: 1.1 m³ Drive power: 4 kW Briquette diameter (mm): 40 Throughput (kg/h): 30-40 Hydraulic oil volume (l): 100 Weight (kg): 530 Equipment: Press Powerful pressing mechanism with wear-resistant, chrome-plated jaws Pre-compactor with end-position dampened cylinder and bolted cover Switchgear with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Iijdpfx Aelht H Eea Esd Tank with agitator and gear motor Screw channel with discharge screw and gear motor Accessories: Briquette length monitoring Automatic on/off Location: 54634 Bitburg

Condition: new, Year of construction: 2026, TECHNICAL DATA Pressing force 30t Maximum load on prism jaw 7.5t Piston stroke 160mm Piston travel 550mm Dimensions and weights Length (product) approx. 1240mm Width/Depth (product) approx. 650mm Height (product) approx. 1920mm Weight (net) approx. 280kg Clear opening 790mm Maximum installation height 1030mm Frame depth 200mm SCOPE OF DELIVERY 2-part prism set for inserting round material Hand and foot levers Iiedpfx Aasi Amnpe Esd Winch for raising and lowering the table Location: Ex works - available for immediate delivery -

Year of construction: 2026, condition: new, The VPR-3500 vacuum membrane press is a universal press for woodworking and thermoforming. The VPR-3500 press is also swivelable and mobile. Possible applications: Veneering / Form bonding / Encasing… Coating of various profiles (veneer, paper, plastic…). Wood bending: Production of curved and laminated components. Vacuum system: Work surface with vacuum channels for uniform negative pressure, even with large workpieces. Becker vacuum pump / Oil-free / Tank capacity 100 l Work area: 3500x1500mm Iieded Ecc Tjpfx Aa Esd Pump power: 0.75 kW Vacuum pump flow rate: 40 m3/h Rubber membrane External dimensions: 3600 x 1650 x 1000 mm Weight: 400 kg Location: Available ex warehouse, 54634 Bitburg - Free loading -

Condition: as good as new (ex-display), Year of construction: 2024, Technical specifications: Laminated panel press from our showroom; Working area: width from 150 - 2,550 mm, height from 150 - 1,400 mm, depth from 150 - 700 mm; Variable pressure adjustment 300/700/1100/1400/1800/2200 dN (kg) of the side pressing beam; Iiedpfxjb Eln Ds Aa Ejd Variable pressure adjustment 500/800/1200/1500/1900/2200 dN (kg) of the top pressing beam. Simple operation via 6 separate push buttons, freely adjustable pre-selection of pressing time with automatic opening function, loading height 300 mm. The machine is in our showroom and can be delivered immediately. Location: available from our warehouse in 54634 Bitburg.

Condition: new, Year of construction: 2026, Gannomat Concept 70 Eco Lamella – Carcase Press with Rapid Traverse Technical specifications: Lamella carcase press from our showroom; Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm, depth 700 mm; - Upper lamella pressing beam with 6 elements, side lamella pressing beam with 5 elements Iedpfx Aajy Egz Sj Eeid - Lamella pressing beams with field-proven tolerance compensation for tightly pressed carcase joints - Counter-pressure surfaces are continuous, coated support plates, 40 mm thick - The pressing force of the pressing beams is infinitely variable via two potentiometers and set electronically via frequency converter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressing beams: min. 500 daN (kg) up to infinitely adjustable 2,200 daN (kg) max. - Pressing force for vertical pressing beams: min. 300 daN (kg) up to infinitely adjustable 2,200 daN (kg) max. - Including option: Rapid traverse speed for quick positioning of the pressing beams, controlled by automatic workpiece detection with sensors in the pressing beams; pressing speed 5/10/25 mm/sec and rapid traverse speed 50 mm/sec. Sensors can be deactivated for pressing special parts. - Jog mode for precise positioning of both pressing beams, e.g., for low pressing forces, drawers, and carcases at 45 degrees. Easy operation via six separate push buttons, freely adjustable pressing time preselection with automatic opening feature, loading height 300 mm. The machine is available from our showroom and can be delivered immediately. Location: ex-stock 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second Ijdpfew Sgnkex Aa Eeid - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: like new (used), Year of construction: 2026, operating hours: 1 h, Super special price, as it was on display at our in-house exhibition. Operating hours: 1 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Ijdpfx Ajtnz Ttoa Eeid Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg