Used Glue Pot for sale (4,420)

Condition: not inspected (used), Year of construction: 2005, total width: 2,100 mm, total height: 1,360 mm, total length: 730 mm, working width: 1,300 mm, type of input current: three-phase, overall weight: 390 kg, power: 37 kW (50.31 HP), FIN Glue spreader SC2R/1300 Kodpjqbtx Iofx Afijnc with 2 rollers The year 2006 manufacture: FIN s.r.l. Italy main technical specification: Width of working: 1300mm The maximum passage between rollers: 120mm The diameter of rollers: 185mm Advancement speed: 19m/min Net weight 390 Kg Overall dimensions: 64 x 210 x 136cm Overall dimensions with case: 73 x 200 x 153cm 400 V, 50 Hz, 037 kW

Year of construction: 2006, condition: good (used), FIN Glue spreader SC2R/1300 with 2 rollers The year 2006 manufacture: FIN s.r.l. Italy main technical specification: Knsdjfguntepfx Afisc Width of working: 1300mm The maximum passage between roller: 120mm The diameter of rollers: 185mm Advancement speed: 19m/min Net weight 390 Kg Overall dimensions: 64 x 210 x 136cm Overall dimensions with case: 73 x 200 x 153cm 400 V, 50 Hz, 037 kW Accurate and uniform spreading with any type of glue, excellent technical characteristics, added to the high practicalness, functionality and safety for the operator, place it at the forefront among the 2 roller glue spreaders. Spreading roller covered in antiacid rubber, ground and furrowed, hard wearing, as they are built with a rational layer of rubber it is, therefore, possible to carry out 6-7 grindings. It is easy and quick to disassemble. Spreading, precise and uniform on one or both sides of the panels. Special shock-absorbers, on the roller supports, allow the rollers an automatic opening depth, so as to spread panels of different thickness within 5 mm. they also compensate for eventual parallelism differences of the panel. Uniform glue dosing by a rectified distribution tank, in sheet-iron, with very quick extraction to allow cleaning. Collecting tank, for glue and washing water, in galvanized sheet-iron, extractable for easy cleaning. Safety protections, in sheet metal on the rollers and glue distribution tank, a sheet metal protection prevents the introduction between the rollers of any object more than 5 mm. thick over the transit established, ensuring the maximum safety for the operator. Electrical installation, in a waterproof case with fuses, thermal switch for motor and transformer protection. Control panel, with starting button, stopping button and warning light (24 V). Rollers rotation chain with self-registrable turnbuckle pinion. Roller washing with a bored washing tube, for the water intake during this operation.

Condition: excellent (used), functionality: fully functional, 230 mm double glue applicator, top/bottom Specification: • condition - fully functional, after inspection • working width - 230 mm • double glue rollers top/bottom • one, constant speed • manual height adjustment • 0.25 kW engine (1330 rpm) • left/right rotation • overall dimensions: 65 x 80 x 155 cm (length x width x height) Additional information: • very good technical condition Kjdpfxov Hzpho Afijnc • the photos presented show the actual condition of the item for sale • possibility of switching on and checking the device on site • the price given in the auction does not include VAT and transport costs

Condition: used, Year of construction: 1989, A machine for applying glue to cardboard. Technical parameters: Knsdpfoua H Hmjx Afiec - working width: 170 mm - machine dimensions: 5800x2400x1800 mm - power supply: 400V Technical condition: used machine, to be reviewed

Year of construction: 2008, condition: excellent (used), I sell the press for glulam glued massive wood LISY DVORAK TH6, year 2008. Material size 3000 X 1250 x 50mm 6 working areas, manual rotation. 6 pcs hydraulic cross pressures per 1 area / pomp 1,1 KW 6 pcs manual pressures per 1 area Self weight 1200kg. Glue spreading machine LISY DVORAK NL200 included in price. Very good condition. Available immediately. Knedpfx Ajkd Drhofijc

Condition: excellent (used), IM Very good condition. Knsdsvcyznopfx Afioc

Condition: excellent (used), Working width: 30 cm Adjustable glue application rate Single-sided glue application Emergency stop button (mushroom switch) Feed table with rollers Total table length: 130 cm Weight: 150 kg Ksdpfewkgt Eex Afijnc 380 V Year: 2003

Condition: good (used), Year of construction: 1995, Pot hole boring machine Grass ECO Press Year of manufacture 1995 S/N 9502665 in good condition right and left linear guide Knjdpfjk D T Ncjx Afisc (work table can be supplied ) weight approx. 45 kg 380 V - 50 Hz - 2,5 A pneumatic connection - max 6 bar CE marked

Condition: new, ⭐⭐⭐⭐⭐ (5.0) 27 reviews ⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! ✈️ Free shipping: 10-day delivery ✈️ Knjdpfx Aefvqixofiec ✅✅✅Energy class A+++✅✅✅ PLUS VAT & SHIPPING* ►►Buy now◄◄ ✨Sandblasting kit with tank✨ ⭕ Outdoor sandblasting, indoor sandblasting, used in mobile sandblasting machines with compressed air. ⭕ Pressure Sandblasting Pot Pressure Sandblasting Pot - Technical Specifications ✔ Working pressure: 7 bar ✔ Abrasive type: steel grit, steel ball, garnet, glass ball (glass sand), etc. ✔ Air consumption: liters/min is shown in the table below. ❓What is a pressure sandblasting pot❓ ✨ A pressurized sandblasting machine is a type of sandblasting equipment that can be used as a mobile unit anywhere outdoors to sandblast non-transportable surfaces (buildings, large steel structures, etc.). It can also be used in sandblasting rooms to sandblast large parts. Since it operates with air pressure, it also requires a compressor. ✨ At Proton, we have standard sandblasting pots of 50 l, 100 l, and 200 l. We can also supply various sizes of blast pots depending on your needs. ✨ All spare parts and equipment are available in our company. We offer sandblasting masks, sandblasting gloves, sandblasting hoses, and boron carbide sandblasting nozzles, which are necessary to ensure that the sandblaster is not affected by the environment. ⚡️Areas of Use of the Sandblasting Pot⚡️ To achieve the required surface roughening before painting and coating, this system is used in areas where cleaning and decorative shaping are desired. The main applications are; the shipbuilding industry, foundry industry, automotive, marble, textile, glass, pipe, manufacturing, and assembly industries. ✳️Standard blast pot sets are supplied with the following equipment.✳️ SANDBLAST POWDER 200 L ►1 Sandblasting Control Valve ►1 Remote Control Valve ►1 Quick-Release Silencer ►1 Water Separator Regulator ►1 Remote Control Handle ►1 Sandblasting Flow Diverter "Y" Connector ►1 Set of Barbed Fittings ►20 Meter Sandblasting Hose ►40 Meter Pneumatic Twin Hose ►1 8 mm Venturi Nozzle ►1 39 mm Nozzle Holder (MHE-1) ►1 Sandblasting Mask ►1 Overall ►1 Pair of Gloves ►1 Sandblasting Bag ►1 2-outlet air stand ►20 m breathing air hose and connection sockets ❗❗❗ Compressor features required for sandblasting tanks Motor power: 37 kW - 50 HP, air flow: 6.25 m3/min, 7-8 bar pressure; a compressor with the required specifications is required. A screw compressor is recommended. ❗❗❗

Condition: new, Diameter 620mm Height 700mm Wall thickness 40mm Kedpfx Afowmmq Njienc Suitable for aluminum, among other materials

Condition: excellent (used), Year of construction: 1994, I sell the side glue spreader Fischer Ruckle FLA,  Year 1994. Suitable for solid wood glulam boards production. Throughfeed with feeding. Very good condition. Available immediately. Kodpot N Hhkefx Afijnc

Condition: good (used), Voss Böwe Passat type 38 E 104 boiling kettle Description: - Stainless steel body - Stable welded - Rounded corners/edges Technical data: Type 80 E 104 Type of current 3N Voltage 380 volt Control voltage 220 volts Rated current 20,4 A Knodpfslik Hnox Afijc frequency 50 Hz Power 12,45 kW Weight 85 kg Dimensions boiler ca. ø 39cm height 40cm Dimensions body ca. 51, x 89,5 x 69,5cm (WxDxL) Calculated volume 40 liters Scope of delivery: 1 x Voss Böwe Passat type 38 E 104 cooking kettle (partw. without side plate because you stood in the compound) Article condition: used, to the controls contactors & switches have to be repositioned Circuit diagram available. More items - new and used - you will find in our store! International shipping costs on request!

Condition: ready for operation (used), Working width: 250 mm Glue dosage adjustment Manual thickness adjustment Two rollers in the table Spring-loaded table One-sided glue application Kjdewa Ipmopfx Afienc Safety switch Infeed roller table

Condition: good (used), Year of construction: 1992, working width: 1,300 mm, Double-sided glue applicator / 2-roller glue applicator Manufacturer: AMOD / Bürkle Type CDL 1300 Suitable for double-sided glue application Working width 1300 mm With 2 new galvanized dosing bars Operating voltage 380 V 2-phase 50 Hz Control voltage 220 V Rated current 1 A Fuse protection 16 A (provided by customer) Including 2 additional glue rollers / good visual condition The machine will be technically inspected and cleaned upon order. Kedpov Sa Utsfx Afijnc

Year of construction: 2024, condition: new, functionality: fully functional, IMPORTANT: delivery time (ex works) approx. 3 weeks Roller glue application units for edge banding machines require regular cleaning, service and maintenance. Wood chips, burned glue particles and other contaminants behind the glue roller won't allow an even and thin glue film on the roller. Hence there won't be an ideal glue application to the board. This is valid for EVA hot-melts and even more so for PUR glues. As long as the glue application unit is still inside the machine the limited accessibility will restrict maintenance success and also result in longer down time. If the application unit is removed the quick cooling-down will prevent thorough cleaning. Furthermore the lack of a proper fixing device and a drive motor for the glue roller are other disadvantages. Technical Data: - 2-temperature control (2 channels) with easy to read display - Heating target temperature and drive starting temperature can be set individually - Glue roller speed: 60 rpm Knodpfx Ajtmviiofioc - 2 straight wheels, 2 turnable wheels with brake - Main supply connection cable: 10 m - Power supply: 380(400) V, 50/60 Hz - Installed power: approx. 2 kW (max) - Dimensions  L x W x H:  60 x 50 x 100 cm - Weight: ca. 60 kg - Painting in light grey RAL 6035 u. traffic blue RAL 5017 Technical documentation with operating instructions, spare parts list and wiring diagram are included in the scope of supply.

Condition: good (used), Pre-melting Polyurethane Glue for Edgebanders - Available No. 4 Units Knjdpfevkpcdex Afioc Model MC 12, CE

Year of construction: 1986, condition: used, - working length (mm): 3200 Kodpfx Afs Drmxjienc - drilling units: 3 from below with 3-spindle drilling head - Hold down: 2 from above - pressure cylinder: 1 from the side - control: Siemens of newer construction

Condition: excellent (used), total width: 7,500 mm, total height: 1,300 mm, total length: 4,500 mm, working width: 2,400 mm, Device description working width 240mm maximum element height 100mm engine power 0.18 kW year of manufacture 1999 Kedpfx Aevzr D Eefijnc manual roller spacing adjustment total width 75 cm total length 45 cm total height 130 cm

Condition: used, Ambition 1430 Glue Pot: UK Stock - £500 Collect or Delivered at cost Spare Glue pot for Brandt Ambition 1400 series / KDF 430 machine. Glue pot is compatible with machines that have a pre-melting unit fitted. Kjdpfx Aewyxq Ijfienc Good condition pot, ready to use.

Condition: good (used), Year of construction: 1988, machine/vehicle number: 0001, turning diameter over cross slide: 1,000 mm, spindle bore: 130 mm, turning diameter: 1,300 mm, turning diameter over bed slide: 1,300 mm, turning length: 2,000 mm, swing diameter over cross slide: 1,000 mm, bed width: 720 mm, workpiece weight (max.): 8,000 kg, power: 48 kW (65.26 HP), Stable classic lathe with Digital readout and aditional equipment, steady rest dia 600, tool holders...machine can be overhauled or adopted to customer needs. Kodpfx Aeqd U Uwjfijnc

Condition: used, functionality: fully functional, workpiece weight (max.): 10,000 kg, overall weight: 4,600 kg, Table size: 1500 x 1500 mm. Max. workpiece weight: 10.000 kg. Country of origin: Sweden. Weight: 4600 kg. With variable turning speed. Knodpfxexphdyo Afioc

Condition: excellent (used), Professional drill chuck with SK40 / ISO40 taper, compliant with DIN 69871 A standard. Manufacturer: EROGLU Präzisionswerkzeuge (Germany) – high-precision manufacturing. Model: 03180PB05553 (3/16-IK). Maximum tightening torque: 20 Nm – ideal for drilling and tapping with controlled force. Version with internal cooling (IK – Innenkühlung). Chuck with torque adjustment + / –, allowing protection of tools and workpieces. Solid and durable industrial design – suitable for use in CNC machining centers and conventional machines. Condition: used, in very good technical condition – ready for immediate use. ✅ German quality – precision industrial-grade drill chuck ✅ Ideal for production and workshop applications. Knsdpfx Afjxlcz Sjijc

Condition: excellent (used), functionality: fully functional, load capacity: 6,000 kg, Equipment: foot remote control, Container Rotator, load capacity 6 tons, Heinrichsglück. 3 identical sets available, in excellent condition. Technical data: - Powered unit + idler unit suitable for cylindrical and also for conical containers - Rubber-coated rollers - Total load capacity approx. 6000 kg - Load capacity per rotator unit 6000 kg - Container diameter approx. 300 - 3000 mm - Adjustment of container diameter on the drive unit - Adjustment of support arms by swiveling, locking with pin bolts - Roller diameter approx. 360 mm - Roller width each twice 75 mm - Continuously variable rotation speed - Remote control for forward and reverse operation - Separate control cabinet (portable) - Idler unit height-adjustable Kodswtq S Depfx Afionc - Drive 400 V - Space requirement driven unit approx. W 1400 x H 800 x D 750 mm - Space requirement idler unit approx. W 970 x H 900 x D 970 mm - Weight driven unit approx. 600 kg - Weight idler unit approx. 250 kg Price is per set.

Condition: good (used), load capacity: 600 kg, Equipment: foot remote control, Welding turntable, 600 kg load capacity, complete set with chuck. Infinitely variable speed and tilt adjustment. Diameter 850 mm. Height to center with vertical plate 700 mm. Horizontal height 950 mm. Length 1450 mm. Width 950 mm. Hand and foot remote control. Tilt angle 135°. Own weight 750 kg. Additional cost for chuck: €400. Kjdpfx Aow Ex Ahofionc

Condition: good (used), 2 pieces 600 kg load capacity welding turntable, very robust speed infinitely variable from approx. 0,01 to 2,0 rpm diameter turntable 700mm inclination up to 135 height horizontal 850mm, tilted to middle 630mm length 1,4 m x width 0,8 m with foot and hand remote control price per piece Kedpfxsig T Drs Afionc