Used Gildemeister Twin 32 for sale (234)

Condition: ready for operation (used), Year of construction: 2013, operating hours: 44,078 h, functionality: fully functional, machine/vehicle number: 8089000198B, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, bar passage: 60 mm, controller model: Fanuc 31i MSL 42-7 60-742-7, counter spindle speed (max.): 5,000 rpm, Automatic lathe with comprehensive equipment! TECHNICAL DETAILS Main Spindle Spindle speed: 5,000 rpm Spindle bore: 65 mm Bar capacity: 60 mm Counter Spindle Spindle speed: 5,000 rpm Turning diameter: 42 mm Travel Axes Travel X1/X2/X3: 60 mm Travel X4: 130 mm Travel Z2: 80 mm Travel Z3: 80 mm Travel Z4: 340 mm MACHINE DETAILS Total weight: 3,500 kg Control: Fanuc 31i MSL 42-7 60-742-7 Spindle hours: 44,078 h Operating hours: 64,405 h EQUIPMENT Hinged belt chip conveyor Bar loader interface Electrical and software preparation Radially driven tooling Gujdpfx Aew Nqa Eog Dok Powered drilling and milling equipment 4-position base holder for Slide 3 Drilling and milling unit Axially driven tooling Twin toolholder ER 11 collet chuck 20x20 mm toolholder for slide Drill holder for turret Toolholder for rear machining, including slide for rear machining 20x20 mm toolholder for rear machining 32 mm diameter drill holder Collet holder for main spindle Collet holder for sub spindle Collet chuck ROEHM KFD HS 112-3 Tool wear monitoring software for Fanuc C-axis main spindle

Condition: good (used), Year of construction: 1999, operating hours: 140,810 h, functionality: fully functional, Gildemeister MF SPRINT 65 Machine No.: 07810000801 Control: SINUMERIK 840 C Year of manufacture: 1999 Operating hours: 140,810 Irco ILS short bar feeder Annual maintenance by DMG, last service on 08.07.2024: - Linear guides, axial bearings, ballscrews and locking nuts renewed on X1 axis - Linear guides, axial bearings, ballscrews and locking nuts renewed on Z1 axis - Linear guides, axial bearings, ballscrews and locking nuts renewed on X2 axis - Linear guides, axial bearings, ballscrews and locking nuts renewed on Z2 axis - All telescopic cover wipers replaced - Safety glass in work area door replaced - All feed timing belts as well as the counter spindle drive timing belt replaced - Tool drive 1 dismantled, disassembled, cleaned, and newly fitted with bearings - Main spindle fan filter mat replaced, coolant valves of turret 1 and 2 replaced - Main spindle and counter spindle chucks dismantled and cleaned - Machine geometry and work area remeasured and adjusted - Hydraulic filter cartridges replaced, pneumatic filter replaced - Technical data see attachment Machine can be inspected under power. Price: €25,000 negotiable The offer is subject to confirmation and non-binding. Changes and errors in technical data or specifications as well as prior sale reserved. Guedpfxsu Dg Ubs Ag Djk Used machines are sold as seen, without any warranty claims. Delivery ex works, packaging and insurance exclusively unless otherwise agreed. Price is net plus legally applicable VAT. Payment to be made, as is customary for used machines, prior to loading.

Condition: good (used), Year of construction: 2003, turning length: 1,505 mm, Turning & Milling Center GILDEMEISTER GMX 400 linear Year of manufacture: 2003 Control: Sinumerik Power line Technical Specifications: Guedpfx Agowzbq Te Dek Main spindle drive power ISM 90: 36/45 kW (100/40%) Main spindle speed: Main spindle torque: Bar capacity: 90 mm Number of magazine positions: 120 pcs Milling spindle tool holder: HSK 63 Counter spindle drive power ISM 90: 36/45 kW (100/40%) Counter spindle speed: Counter spindle torque: Bar capacity: 90 mm B-axis / Milling spindle: Drive power: Speed: Torque: Tool holder: HSK z3 Lower turret: X-axis: Z-axis: Speed, driven tools: Number of turret stations: 12 pcs Tool holder: VDI 40 Accessories: - Chip conveyor - High-pressure unit with 20 bar - Preparation for 3D measuring probe - Tailstock function on counter spindle - Automatic sliding doors

Condition: good (used), Year of construction: 1989, operating hours: 64,136 h, Center height 350 mm Turning length 1000 mm Max. swing diameter over bed track cover 600 mm Max. swing diameter over cross slide 360 mm Spindle bore 107 mm Speed range 16 – 3150 rpm Feed range longitudinal and face 0.5 – 5000 mm/min Rapid traverse longitudinal + face 9 m/min Main drive 30 kW Dimensions of the machine with chip conveyor L x W x H 5400 x 2200 x 2000 mm Weight 6400 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 General description: CNC manual input control with programming input via function and numeric keypad. All information is entered in dialogue with the screen. Integrated menu technology and display of all functions in plain text. Control keyboard, screen and handwheel in a separate chip protection hood. The EPL control offers the following options: Programs can be entered and changed manually with direct operator guidance via the EPL control without any programming preparation. NC programs can be entered in ISO/EIA standard via the RS 232 serial interface, output or entered directly by hand. Processing cycles: Roughing cycles for longitudinal, face and contour turning, also with allowance. Thread. Undercuts DIN 509 form E and F and DIN 76, grinding allowance can also be programmed. Axial and radial recesses according to DIN 471 and 472, also with base finishing. Radii 90° and chamfers 45°. Automatic cutting radius compensation for cycles, undercut, recess, radius, chamfer. Programming: Set-oriented, metric/inch, diameter with absolute input, radius with incremental input, full circle programming, sub-program technology, masking levels for program parts. Zero point shift. Operating mode selection via menu. Program input and output: In dialog via menu with operator guidance or directly in dialog • Hydraulic 3-jaw chuck • Hinged chip conveyor • 12-way tool disk turret, 6 of which are driven tool holders • Electronic handwheel • Coolant system Gedpfx Agjvr Eh Es Dsuk • RS 232 interface • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • Various tool holders Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2005, turning diameter 640 mm turning length 1.185 mm control SINUMERIK 840D swing diameter 640 mm distance of spindle heads 1500 mm slide I: X1 / Y1 / Z1 / B slide travel X-axis 550 mm slide travel Z-axis 180 mm Z- Travel 1.185 mm B - axis 240 ° feed x-axis 0 - 40.000 mm/min feed y- axis 1 - 24.000 mm/min Feed z- axis 1 - 70.000 mm/min feed B-axis 1 - 20 1/min rapid traverse X/Y/Z 40 / 24 / 70 m/min feed capacity X/Y/Z S6: 7,00/11,00/7,50 kN tool taper HSK 63 turning speed milling-spindle 10 - 12.000 1/min power capacity at 100 % load 13,20 kW power capacity at 40 % load 22,00 kW torque milling spindle 60 / 100 Nm no. of workpieces in the magazine 46 Stück tool length - max. 350 / 200 mm tool diameter 80 mm wotkpiece diameter with 2 vacant positions 120 mm weight of tools max. 6 / 10 kg slide II: X2 / Z2 slide travel X-axis 180 mm Z- Travel 1.050 mm feed x-axis 1 - 24.000 mm/min Feed z- axis 1 - 36.000 mm/min rapid traverse x + z axis 24 / 36 m/min feeding force S6: 11,00/9,00 kN turret (x-stations) 12 tool taper DIN 69880 Ø40 Driven tools - quantity 12 Driven tool turning speed 1 - 4.000 1/min power capacity at 100 % load 10,70 kW torque S1: 32 Nm Gsdev Irgyjpfx Ag Douk Slide III - longitudial travel Z3 mm Z- Travel 1.150 mm Feed z- axis 1 - 36.000 mm/min rapid traverse Z-axis 36,00 m/min feed capacity Z - axes S6: 13,00 Nm Main spindle ISM90 turning speed main-spindle 10 - 4.000 1/min power capacity at 100 % load 36,00 kW power capacity at 40 % load 45,00 kW max. torque at 40% / 100% load 800 / 630 Nm spindle bore 80 mm turning speed opposed-spindle 10 - 5.000 1/min power capacity at 100 % load 21,00 kW power capacity at 40 % load 28,00 KW max. torque at 40% / 100% load 320 / 240 Nm spindle bore 80 mm total power requirement 70,00 kW weight of the machine ca. 20,00 t dimensions of the machine ca. 8,50 x 4,50 x H3,10 m Machine with SIEMENS SINUMERIK 840D control, main- and counter-spindle, chip conveyor, dust exhauster, DMG-automation WH10top. Main-spindle ISM90: hollow clamping device, C-axis, 3-jaw hydraulic chuck SMW-AUTOBLOK KNCS-NB-315-91 Counter-spindle ISM76: closed center clamping device, C-axis, 3-jaw hydraulic chuck SMW-AUTOBLOK KNCS-NB-315-91 Pick-up device with integrated conveyor belt, automatic protective cover, differential pressure clamps. Incl. pump-frame for coolant - Pump 1: 17 l/min at 80bar - Pump 2: 20 l/min at 8bar - Pump 3: 40 l/min at 20bar Without coolant unit. Was connected to a central coolant-system. Accessories: Hainbuch collet chuck incl. collets Ø30,45,50,55,60,65,72,82,85,90 1 piece workpiece pick-up-gripper for turret

Condition: used, Year of construction: 1991, turning diameter 42 mm turning length 250 mm control total power requirement kW weight of the machine ca. t dimensions of the machine ca. m CNC-lathe with bar feed with Sameca bar feed Gusdpet Hwz Asfx Ag Dsk

Condition: ready for operation (used), Year of construction: 2005, 1 unit of used CNC lathe with driven tools and Y-axis. Siemens control. Guedpfjwz Sgfex Ag Djk

Condition: good (used), Year of construction: 2013, functionality: fully functional, Gildemeister SPRINT 65 Linear IRCO Breuning bar feeder Chip conveyor High-pressure unit with integrated paper belt filter system and cooling unit Gujdpewwa U Asfx Ag Dsk Fanuc 310 control Operating hours: approx. 61,550 Production hours: approx. 46,400 The machine can be inspected under power Immediately available

Condition: not inspected (used), Year of construction: 2009, operating hours: 24,854 h, functionality: unexamined, machine/vehicle number: 00410002771, turning diameter over cross slide: 380 mm, turning diameter: 410 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 850 mm, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the machine within the period from 28.07.2025 to 31.07.2025. Including a comprehensive tool package TECHNICAL DETAILS Swing diameter over bed: 700 mm Max. swing diameter over cross slide: 380 mm Max. turning diameter: 410 mm Centre distance: 975 mm Turning length: 800 mm X-axis travel: 300 mm Z1-axis travel: 850 mm Z3-axis travel: 800 mm Max. spindle speed: 4,000 rpm Main spindle: ISM 102 C-axis torque: 600/770 Nm Spindle flange height from floor: 1,040 mm Spindle flange diameter: 220h5 mm Chuck diameter: 315 mm Bar diameter: 102 mm Spindle bore diameter: 118 mm Front bearing diameter: 160 mm C-axis angular resolution: 0.001° Turret with driven tools Tool holders: VDI 40 Gsdpfx Agewvhunj Douk Number of tools: 12 pcs. Tailstock: travel 800 mm, Morse taper 5 MT MACHINE DETAILS Serial number: 00410002771 Operating hours: 71,843 h Spindle hours: 24,854 h Dimensions: 5,000 x 2,800 x 2,000 mm Weight: 7,500 kg EQUIPMENT - With technical documentation

Condition: good (used), Center height 260 mm Trestle holder MK 4 Quill stroke 100 mm This hydraulic tailstock comes from a GILDEMEISTER CT 40 CNC slant-bed lathe. Fig. similar Gujdoralkmopfx Ag Djk Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Condition: good (used), Year of construction: 2007, operating hours: 27,896 h, functionality: fully functional, machine/vehicle number: 2101-0171, turning diameter: 20 mm, rotational speed (max.): 10,000 rpm, torque: 14 Nm, TECHNICAL DATA Max. turning diameter: 20 mm Tool body diameter: 20 mm Spindle positioning resolution: 0.1° Main spindle Rated power: 3.7 kW Power: 5.5 kW Torque: 14 Nm Rated torque: 9.4 Nm Speed: 10,000 rpm Axis data Linear axis Z1 / X1 / Z1 – travel: 80 / 35 / 240 mm Linear axis Z1 / X1 / Z1 – feed rate (max.): 40 m/min Linear axis Z1 / X1 / Z1 – acceleration (max.): 10 m/s² Linear axis Z1 / X1 / Z1 – nominal force: 1,250 N Linear axis Z2 / X2 – travel: 180 / 230 mm Linear axis Z2 / X2 – feed rate (max.): 40 m/min Linear axis Z2 / X2 – acceleration (max.): 10 m/s² Linear axis Z2 / X2 – nominal force: 1,250 N Tool holder Number of fixed tools (internal): 6 Diameter: 20 mm Number of fixed tools (external): 4 Tool shank size: 12 × 12 mm Number of driven tools: 4 Collet type: ESX 16 MACHINE DETAILS CNC control: Fanuc 16iT Machine dimensions (L × W × H): 2,275 × 1,300 × 1,760 mm Weight: 2,600 kg Connected load: 21 kVA Power-on time: 85,620 h Operating hours: 27,896 h Gsdpew Em Dmofx Ag Deuk EQUIPMENT - CNC control: Fanuc 16iT - Bar feeder FMB Turbo 3-36 / 4200 / A, year of manufacture 2007 - Coolant tank with chip conveyor - Centralized lubrication - Handheld control device - Documentation available

Condition: used, Tailstock, counter bearing for dividing head, dividing attachment -Tailstock comes: from a Gildemeister lathe -Tip height: 270 mm -Quill: electrically driven Gedpfx Aodkru Hjg Douk -Foot switch -Recording: MK5 -Number: 1x tailstocks available -Price: per piece -Dimensions: 820/250/H400 mm -Weight: 136 kg

Condition: good (used), Year of construction: 2007, operating hours: 14,029 h, functionality: fully functional, turning diameter over cross slide: 270 mm, turning length: 650 mm, turning diameter: 400 mm, spindle bore: 65 mm, spindle speed (max.): 4,000 rpm, For sale is a Gildemeister NEF 400 CNC lathe. The machine is in good condition, ready for immediate use, and fully functional. Technical specifications: Year of manufacture: 2007 Control: Heidenhain CNC Pilot 4290 Operating hours: 14,029 h X-axis (transverse travel): approx. 220 mm Z-axis (longitudinal travel): approx. 700 mm Max. turning diameter: approx. 400 mm Max. swing diameter over bed: 400 mm Max. swing diameter over cross slide: 270 mm Max. turning length: 650 mm Spindle bore: 65 mm Speed range: 0 - 4,000 rpm Drive power (100% duty cycle / 40% duty cycle): 12/15 kW Max. torque: 400 Nm Number of tool positions: typically 8 Tool holder: VDI 30 Tailstock travel: 680 mm Tailstock mount: MT 4 Clamping pressure: approx. 6.8 kN (hydraulic) Space requirement (L x W x H): approx. 2.5 x 1.7 x 1.8 m Machine weight: approx. 2.8 t Chip conveyor included in the offer Accessories such as tool holders are not included in the offer Can be offered separately Transport and loading can be arranged throughout Europe upon request for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us; our team will be happy to assist you. Trade-in or exchange possible! Machine Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? Gujdpowig R Ijfx Ag Dsk For further information or to contact us, please visit our website

Condition: used, Year of construction: 2004, operating hours: 60,425 h, functionality: fully functional, turning length: 1,000 mm, turning diameter over cross slide: 350 mm, TECHNICAL DATA Diameter of rotation: max. 465 mm Length of rotation: 1050 mm Diameter when turning: 680 mm Diameter of the chuck: 325 mm Travel x: 300 mm Travel z: 1050 mm Control: Fanuk Series 21I-TB Speed range: Max 3500 rpm Drive power: 33 kW Torque: max. 630 Nm Gjdpfsv Epzvjx Ag Djuk Diameter of the bearing in the spindle: 120 mm Max. bar diameter: 90 mm Tailstock stroke: 850 mm Pin stroke: 150 mm Rapid traverse X/Z: 30 m/min Number of tool positions: 12 positions Tool holder: VDI 40

Condition: used, Year of construction: 2019, number of spindles 8 bar capacity 36 mm control FANUC 30i-B Subspindle speed 7.500 U/min Guodpfx Ajwgi D Eeg Dsk Bar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system. The machine only has 15.666h spindle hours. The machine is in a well-maintained condition and can be inspected under power. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. The machine works with a EGS loading system -> This can be purchased separately An extensive tool package is included. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MULTISPRINT36 | MULTISPRINT-36

Condition: ready for operation (used), Gildemeister 851.75.00-03.26 card (570 127/137), used, normal signs of use, 100% functional Gujdpfxji D U S Rj Ag Dek

Condition: used, Hydraulic power pack, hydraulic pump, hydraulic pump -Hydraulic unit comes from a Gildemeister lathe -Drive: 1.1 kw -Speed: 1410 rpm -Max. Pressure: 25 bar -Liter output: l/min Gjdpob Uht Eofx Ag Douk -Filter -Hydraulic tank -Dimensions: 500/680/H660 mm -Weight: 98 kg

Condition: used, Year of construction: 2001, functionality: fully functional, center width: 1,000 mm, turning diameter over bed slide: 500 mm, For sale is a cycle-controlled lathe of the Gildemeister brand and type NEF 520 K The machine is fully functional, the guides are somewhat worn but still functional Technical data: Gildemeister universal lathe NEF 520K Year of manufacture: 2001 Control: Siemens Touch Panel Rotation Ø over bed: 500mm Rotation Ø over facing slide: 290mm Face travel: 260mm Center distance: 1000mm Drive power 12 KW 1st gear stage 8 - 750 rpm 2nd gear stage 32 - 3000 rpm Quill Ø: 80mm Quill holder: MK5 Quill stroke: 180mm Three-jaw manual chuck: Ø250mm Four-jaw manual chuck: Ø250mm Tool holder: Multifix size C Fixed vice with jaws and rollers, guide Ø10 - 115 On request, loading and transport can be organized for an additional charge Gedpstrmrxjfx Ag Douk All prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours?

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, turning length: 600 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 250 mm, travel distance Z-axis: 635 mm, Machine with C-axis and driven tool positions TECHNICAL DETAILS Swing diameter: max. 505 mm Turning diameter: max. 320 mm Turning length: max. 600 mm Control: Siemens Sinumerik Powerline 840D Spindle Speed range: max. 5,000 rpm Bar capacity: 65 mm Travel paths x-axis: 250 mm z-axis: 635 mm Tool Gedpfx Agsvprmvs Dsuk Number of positions in the tool changer: 12 Tool holder: VDI 30 MACHINE DETAILS Dimensions (L x W x H): 4,296 mm x 1,715 mm x 1,770 mm Machine weight: 4,500 kg Incl. chip conveyor

Condition: used, Year of construction: 2019, number of spindles 8 bar capacity 36 mm Gsdpfx Agewf D S Is Deuk control FANUC 30i-B Subspindle speed 7.500 U/min Bar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system. The machine only has 15.650h spindle hours. The machine is in a well-maintained condition and can be inspected under power. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. The machine works with a EGS loading system -> This can be purchased separately An extensive tool package is included. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MULTISPRINT36 | MULTISPRINT-36

Condition: ready for operation (used), Gildemeister 852.14.00-01.34 bus adapter, serial number as per photo, used, normal signs of use, 100% functional Gsdpfx Agoi D U Tcj Djuk

Condition: used, Tool holder, milling holder, milling tool -Intake: SK50 5 pieces -Sizes: see pictures -Price: complete -Dimensions box: 400/300/H270 mm -Weight: 42.1 kg Gsdjfnbynjpfx Ag Deuk

Condition: used, Year of construction: 2021, number of spindles 8 bar capacity 36 mm control FANUC 30i-B Subspindle speed 7.500 U/min Bar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system. The machine only has 6.944h spindle hours. The machine is in a well-maintained condition and can be inspected under power. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. The machine works with a EGS loading system -> This can be purchased separately Gsdpjwf D Szsfx Ag Deuk An extensive tool package is included. The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MULTISPRINT36 | MULTISPRINT-36

Condition: ready for operation (used), Gildemeister VK030 SI188 card SN6235027,used, normal signs of wear, 100% functional, scope of delivery as per photos Gusdpjtztfaefx Ag Dok

Condition: ready for operation (used), Gildemeister 9.635.839 High Board 25-355 , serial no. according to photo, used, normal signs of wear, 100% functional Gedpfx Aoi D U Tgsg Dsuk