Used Gildemeister Nef 660 for sale (237)

Condition: ready for operation (used), Year of construction: 1996, number of axes: 2, This Gildemeister MF twin 65 was manufactured in 1996. It features two turrets, each with 12 tool positions, all motorized-capable, and includes 14 driven tools and 14 tool holders. The machine boasts both spindles in very good condition and a bar passage of 65 mm, complemented by a Cucchi Pietro bar feeder. Contact us for more information about this machine. • 2 turrets (12 + 12 tool positions), all motorized-capable • Bar passage: 65 mm • Both spindles in very good condition • New hydraulic/power unit pump Additional equipment • Cucchi Pietro bar feeder • 14 driven tools Podpfsyaqr Ajx Ah Hogg • 14 tool holders

Condition: good (used), Year of construction: 2007, operating hours: 88,040 h, functionality: fully functional, machine/vehicle number: 07400003691, turning diameter: 120 mm, spindle bore: 118 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,500 mm, total length: 5,500 mm, total width: 2,500 mm, overall weight: 11,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D POWERLINE, DMG GILDEMEISTER TWIN 102 CNC Turning and Milling Center - Recorded spindle hours: 43,558 - Spindle speed range: 3,200/5,000 rpm - Swing diameter: 270 mm - Spindle distance: 900 mm - X1 axis travel: 290 mm - Z1 axis travel: 650 mm - X2 axis travel: 180 mm - Z2 axis travel: 650 mm - Y1 axis travel: ±40 mm - Z3 axis travel: 670 mm - X3 axis travel: 175 mm - Max. bar diameter: 100/104 mm Psdpeyaqgysfx Ah Hegg - Number of driven tools per tool turret: 12 - Including chip conveyor, with 2 tool turrets (each with 12 tool stations), main and counter spindles, as well as foot switches Attention, the machine has the following defects: - The B-axis is defective (mounted on turret 1) - Guideways and drives show age-related wear - X2 axis (guide rails) runs slightly out of alignment by approximately 0.03 mm (should be re-measured) - Occasionally, axis reference value setting in the control system fails - The hydraulic pump was replaced after a failure and is now installed externally as a standalone unit FCA D-58256 Ennepetal, loaded on truck at a mutually agreed date at the end of February 2026.

Condition: good (used), Year of construction: 2008, operating hours: 72,899 h, functionality: fully functional, machine/vehicle number: 07510001241, turning length: 1,185 mm, turning diameter: 640 mm, spindle speed (max.): 12,000 rpm, workpiece weight (max.): 150 kg, total height: 3,040 mm, total length: 7,800 mm, total width: 4,100 mm, overall weight: 16,500 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, DMG GILDEMEISTER GMX 250 LINEAR CNC Turning and Milling Center - Recorded spindle hours: 39,361 - Swing diameter: 640 mm - Counter spindle turning diameter: 400 mm - Spindle distance: 1,500 mm - X1 axis travel: 550 mm Pgedpfx Ahjyaqczo Heg - Y1 axis travel: 180 mm - Z1 axis travel: 1,185 mm - B1 axis travel: 240° - X2 axis travel: 180 mm - Z2 axis travel: 1,050 mm - Z3 axis travel: 1,150 mm - Spindle speed range: 3,200/4,000 rpm - Rapid traverse rate, Slide 1 (X/Y/Z): 40/24/70 m/min - Rapid traverse rate, Slide 2 (X/Z): 24/36 m/min - Rapid traverse rate, Slide 3 (Z): 36 m/min - Tool holder: HSK 63 - Spindle speed: 12,000 rpm - Number of tool stations in chain magazine: 40 stations - Incl. tool holders mounted on the turret - Incl. bar loader, manufacturer: COCCHE GIOVANNI, type: CNC-DB 110, year of manufacture: 2008, serial number: CNCDB-08.306, weight: 1,500 kg Note: The machine has the following defects: - The hydraulic unit is faulty – it needs to be repaired - The Q2 axis (milling spindle tool changer) fails frequently - X2 axis (guideways) moves slightly askew - The linear guides and drives show wear commensurate with age Attention: A vehicle with 3,000 mm transport width is required for transport! FCA D-58256 Ennepetal, loaded onto truck at a mutually agreed date at the end of February 2026.

Condition: used, Year of construction: 2007, controller manufacturer: Siemens, controller model: 840 D, _____ Description: Year of manuf. : 2007 Control : Siemens 840 D Turning diam. : 250 mm Turning length : 650 mm In General: Year of construction:2007 Control:Siemens 840 D Bar capacity:65 mm Turning diameter:350 mm Turning length:650 mm Main spindle: Technology:Motor spindle Speed:5,000 rpm Power max.:35 kW Torque max.:370 Nm C-axis:0.001 Bar capacity:65 mm Chuck:Hainbuch Spanntop size 65 Clamping cylinder:Hollow clamping cylinder Sub spindle: Technology:Motor spindle Speed:5,000 rpm Power:26 kW Torque:290 Nm C-axis:0.001 Chuck:Hainbuch Spanntop size 65 Clamping cylinder:Partial hollow clamping cylinder Z-axis:670 mm X-axis:175 mm Tool carrier i (X/Y/Z): Technology:Tool turret, 12 stations Pgodpjyamflofx Ah Hjg Tool holder:VDI 30 Tool drive:4,000 rpm, 11 kW, 28 Nm X-axis:300 Y-axis:80 mm ( +/- 40 mm) Z-axis:650 mm Tool carrier II (X/Z): Technology:Tool turret, 12 stations Tool holder:VDI 30 Tool drive:4,000 rpm, 11 kW, 28 Nm X-axis:180 Z-axis:650 mm Equipment: Chip disposal:Chip conveyor Coolant supply:IKZ system Measuring systems:Direct in all X-axes (glass scales) Bar loader:IRCO Breuning Part removal:Finished part gripper + indexing belt Emulsion mist separator:Mechanical Set-up mode:Electronic handwheel

Condition: used, Year of construction: 2008, functionality: fully functional, turning diameter: 200 mm, spindle motor power: 11 W, spindle speed (max.): 5,000 rpm, spindle bore: 50 mm, travel distance Z-axis: 450 mm, type of input current: three-phase, chuck outer diameter: 210 mm, bar diameter (max.): 50 mm, We offer this used DMG Gildemeister CTX 310 eco CNC turning and milling center, year 2008. The lathe is in perfect working condition, and various sets of chucks and driven tools are included in the price. Pgjdpfx Aoyc Nrgeh Hog All original paper manuals are available. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2008, controller manufacturer: HEIDENHAIN, controller model: na, number of axes: 3, This 3-axis Gildemeister CTX 420 Linear was manufactured in 2008. It features a HEIDENHAIN iT CNC control, motorized tools, and both C and Y axes, enhancing its horizontal turning capabilities. Consider the opportunity to buy this Gildemeister CTX 420 Linear horizontal turning machine. Contact us for more information. Machine Benefits Technical Machine Benefits Pgodpoyalnlefx Ah Hjg • Motorized tools: yes • C axis: yes • Y axis: yes Extra Information Machine still under power

Condition: used, Hydraulic self-centering steady rest, luenette, lynette SMW AUTOBLOK Hydraulic steady rest with hydrostatic bearings Suitable for GILDEMEISTER / MAX MÜLLER lathe MD 5 Type: SLK 8-70 N Clamping range: 8 to 70 mm Operating pressure: approx. 60 bar steady rest base: 245 x 240 mm Type of construction: stationary - 3 pieces roller bearing Ø 35 mm - roller width 18 mm Pjdpfjiv Irlox Ah Hegg - hydraulic self centering dimension L x W x H: 350 x 250 x 550 mm dead weight: 65 kg good condition

Condition: ready for operation (used), Year of construction: 1998, operating hours: 17,000 h, functionality: fully functional, turning length: 305 mm, spindle speed (max.): 5,000 rpm, swing diameter over bed slide: 440 mm, bar passage: 42 mm, controller model: Heidenhain Elektro Pilot 3190, TECHNICAL DETAILS Swing diameter over bed: 440 mm Swing diameter over carriage: 210 mm Turning length: 305 mm Bar capacity: 42 mm Spindle speed: 5,000 rpm Turret: 12 stations Driven stations: 6 stations Tool holder: VDI 20 MACHINE DETAILS Control: Heidenhain Elektro Pilot 3190 Pjdpfx Ahsycu A Ro Hjgg Dimensions & Weight Machine dimensions (L x W x H): 2,800 x 1,651 x 1,771 mm Machine weight: approx. 3,000 kg Power-on hours: approx. 17,000 h EQUIPMENT Chip conveyor C-axis Driven tools Parts catcher Tailstock Documentation

Condition: used, Year of construction: 2004, Technical data: Main spindle: Max. turning diameter: 33 mm Max. speed: 8000 1/min Drive power: 5.5 kW Drive power at 60% duty cycle: 7.5 kW Slide 1: Pgedetzyx Tspfx Ah Heg Slide travel Z1: 320 mm Slide travel X1: 50 mm Slide travel Y1: 255 mm Rapid traverse speed: 30 m/min Ball screw diameter: 25 mm Tool holder slide 1: Number of tools stationary with tool shank 16 x 16: 5 pieces Slide 2: Slide travel X2: 165 mm Slide path Z2: 200 mm Rapid traverse speed: 30 m/min Ball screw diameter: 30 mm Tool holder slide 2: Number of stations for turret with integrated spindle: 8 pieces Number of axially driven tools (integrated): 8 pieces Coolant tank, approx.: 400 l Coolant pump, max. output: 80 l/min Dimensions (LxWxH), approx.: 2460 x 1510 x 1750 mm Equipment: - CNC control Fanuc iT - Workpiece unloading system - IEMCA bar loading magazine - 5-pos. tool carrier plate for slide 1 - Electrical interface and software for bar loading magazine - Collet chuck holder for main and pick-up spindle - 2 Double drill holder for rear machining support with cylinder - Pick-up spindle workpiece pusher

Condition: ready for operation (used), Year of construction: 2002, operating hours: 19,300 h, functionality: fully functional, turning length: 750 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 185 mm, travel distance Z-axis: 750 mm, swing diameter over bed slide: 320 mm, TECHNICAL DETAILS Swing diameter over bed: 320 mm Swing diameter over cross slide: 150 mm Turning length: 750 mm Travel X-axis: 185 mm Travel Z-axis: 750 mm Bar capacity: 52 mm Spindle speeds: 4,000 rpm Spindle nose: 55027/A6 DIN Spindle drive: 9 kW Pgsdpjycuvksfx Ah Hsg Rapid traverse X-axis: 10 m/min Rapid traverse Z-axis: 8 m/min Tailstock quill diameter: 70 mm Tailstock quill stroke: 120 mm Tailstock taper: MT 5 MACHINE DETAILS Control: Heidenhain Manuel Plus Dimensions & Weight Machine dimensions: 2,450 x 1,668 x 1,825 mm Machine weight: approx. 2.0 t Operating hours: approx. 19,300 h EQUIPMENT 3-jaw chuck Tailstock Multifix size B Documentation

Condition: ready for operation (used), operating hours: 28,339 h, functionality: fully functional, turning length: 450 mm, turning diameter: 300 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 160 mm, controller model: Siemens 840D ShopTurn, TECHNICAL DETAILS Turning diameter: 300 mm Turning length: 450 mm X-axis travel: 160 mm Main spindle speed range: 5,000 rpm Counter spindle speed range: 5,000 rpm Pgedoycupqspfx Ah Heg Bar capacity: 65 mm Tool holder: VDI 30 Driven tool stations: 12 Driven tool speed: 5,000 rpm Rapid traverse X-axis: 60 m/min Rapid traverse Z-axis: 45 m/min MACHINE DETAILS Control: Siemens 840D ShopTurn Dimensions & Weight Required space with chip conveyor: 6,895 x 2,284 x 1,885 mm Machine weight: approx. 4.3 t Operating hours Power-on hours: 59,643 h Spindle hours: 28,339 h EQUIPMENT Chip conveyor Sub spindle Hainbuch collet chuck 65 mm Hainbuch collet chuck 42 mm Parts catcher Conveyor belt C-axis Driven tools Documentation

Condition: used, Year of construction: 1998, operating hours: 97,593 h, functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. A video of the machine in operation prior to disassembly is available upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DATA Control: Sinumerik 840C Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Main Drive Power Output: 28 / 21 kW Speed Range: 25 – 4,500 rpm Torque: 320 / 240 Nm Maximum Feed Rate for Thread Cutting: 10 m/min C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Tool Carrier Number of Tool Stations: 8 Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Maximum Speed of Tool Carrier 1: 4,000 rpm Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Podpowym Nfefx Ah Hegg Slide 2 Cross Travel / Longitudinal Travel: 82 / 120 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN MACHINE DATA Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Accessories: Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 29,200 h, This Gildemeister Sprint 20-8 was manufactured in 2010. It features a cooling system with a 600l capacity and 50µm filter, alongside a high-pressure pump option of 8 or 20 bar. The machine includes a Bristol B270/E oil mist separator and an IEMCA Boss 332E bar loader for 3m bars. With a chip discharge height of 1,250mm, it's designed for efficient operation. Contact us for more information about this machine. Additional equipment • Mechanical and electrical preparation for fire extinguishing system • Cooling system with 600l capacity and 50µm filter • Pump with options of 8 or 20 bar • IEMCA Boss 332E bar loader for bar length up to 3m • Bristol B270/E oil mist separator Psdpex D H I Tofx Ah Hjgg • Moving headstock (80mm) with tools on slides plus tool breakage detection Machine Benefits Technical Machine Benefits • Chip discharge height: 1250mm Extra Information Machine still under power

Condition: used, Year of construction: 1988, tail stock ja ja condition nicht geprüft weight of the machine ca. 3,8 t Pgedsu Su I Espfx Ah Hjg

Condition: used, Year of construction: 2000, turning diameter . mm turning length . mm control 2x 840 D Pgjdoqn A Rnspfx Ah Hjg Kühlmittelsystem chip conveyor ja kW generator - rated current 95,00 A connected load 65,00 kW

Condition: good (used), Year of construction: 1998, turning diameter max. 250 mm control Fanuc 16 T 2 toll turrets 2 x 12 tool taper HSK 63 frequency 50 Hz ampere 168 A Chip conveyor: JAKSS Filter system: JABelade Psdpfx Ahjqn A Rge Hjgg

Condition: reconditioned (used), Year of construction: 2006, CNC Lathe GILDEMEISTER CTX 420 linear Equipped with Siemens 840 D powerline control Year of manufacture: 2006 Max. turning diameter: 324 mm Max. turning length: 600 mm Max. swing diameter: 680 mm Spindle bore: 79 mm Max. spindle speed: 4,500 rpm Psdpfexzt Dcjx Ah Hegg Including the following accessories: Sliding guard with interior lighting 12-position turret with 12 driven stations Y-axis, C-axis Tool measuring device Parts catcher 3-jaw hydraulic chuck 210 mm with foot switch Hainbuch hydraulic collet chuck IRCO Breuning RBK 10012 bar feeder Signal lamp Tailstock with quill Chip conveyor Oil mist extraction Coolant system with high-pressure coolant (IKZ) and belt filter unit Operating manuals

Condition: used, Year of construction: 2008, Working area Circulation dia. above bed slide way cover: 680mm Circulation dia. above cross guide cover: 565 mm Facing traverse: 324 mm Longitudinal path: 600 mm Main spindle Spindle nose dia: 170 h5 / 220 h5 mm Bar dia. Max: 65 / 90 mm Spindle nose dia. in front bearing: 120 / 150 mm Spindle boring: 79 / 110 mm Chuck dia: 200 / 250 / 315 mm Drive rating S1 100% duty cycle: 25 / 33 kW Rotational speed range: 5000 / 4000 r.p.m Max. torque S1 100% duty cycle: 270 / 375 Nm Salient rotational speed: 900 / 850 r.p.m C axis (main spindle) Rotational speed: 250 r.p.m Stopping torque: 200 Nm Division accuracy: 0,025 deg. Compound slide X/Z/Y Facing traverse X: 260 / 1852 mm Longitudinal path Z: 635 / 6202 mm Ball spindle Z (dxh): 40x15 mm Vertical path Y: ±40 mm Ball spindle Y (dxh): 40x5 mm Rapid traverse speed X/Y/Z: 60/15/45 m/min Feed force X/Y/Z: 3,5/7/7 kN Pjdpfx Ahjya Iirs Hsgg Tool holder Number of tool stations: 12 Tool mounting cylinder shaft (DIN 69880): 40 mm Tool disk, axial tool holder pitch circle dia: 370 mm Number of driven tools: 12 Drive rating max. 100% duty cycle: 4,9 kW Torque 100% duty cycle: 10,5 Nm Rotational speed range: 4500 r.p.m Tailstock Tailstock traverse path: 580 mm Tailstock force: 8 kN Tailstock mounting: MT 5 Rapid traverse speed Z2: 6 m/min Part accuracy for positioning: =/< 10 mm Hydraulic Contents: 40 l Pump capacity: 2,2 kW Max. pressure: 80 bar Pressure for clamping unit, tailstock: 10-60 bar Coolant unit Contents: 210 l Pump capacity: 1,7 kW Feed rate at 6 bar: 20 l/min Electrical energy requirement Connected rating: 50 kVA Operating voltage: 400 V Frequency: 50 Hz Fuses (slow blow/VDE 0100) perm: 80 A Voltage fluctuations at 400 V: 6% - 10% Machine dimensions Dimensions (LxWxH) with chip conveyor: 4350/2460/2080 mm Weight without chip conveyor/chip bath: ca. 6.000 kg Workplace based constant noise pressure level: - (DIN 45635 part 1-04.85 (ISO 3740-1980), measured as a chip removing cycle as per DIN 45635 part 1601-07.78): 77 db (A) - in idle running as per DIN 45635 part 1601-07.78: 78 db (A)

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, spindle bore: 65 mm, spindle speed (max.): 5,000 rpm, bar passage: 60 mm, controller model: Siemens 840D Powerline, counter spindle speed (max.): 5,000 rpm, TECHNICAL DETAILS Spindle bore: 65 mm Bar capacity: 60 mm Main spindle max. speed: 5,000 rpm Counter spindle speed: 5,000 rpm MACHINE DETAILS Control: Siemens 840D Powerline Psdoya Ecvepfx Ah Hegg Machine weight: 3,500 kg EQUIPMENT C-axis IEMCA bar feeder Master 880/33 HF (bar length up to 3,200 mm) KSS coolant supply / cooling unit Hinged belt chip conveyor

Condition: used, Year of construction: 1989, Technical details: number of spindles: 6 spindle passage: 20 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Gildemeister Type: GS20-6 Yob: 1989 six-spindle automatic lathe 8 main spindles Pgsdpox Hggwjfx Ah Hog for bars up to D=20mm All cross units are equipped with a tool holder (from Gildemeister or IMG Attachments) All longitudinal units are equipped, either fixed or rotating (without collets) An independent feed is installed at position 1 A gear set for one speed is installed A gear set for one cycle time is installed The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Year of construction: 1989, Technical details: number of spindles: 6 spindle passage: 20 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Gildemeister Type: GS20-6 Yob: 1989 six-spindle automatic lathe 8 main spindles for bars up to D=20mm All cross units are equipped with a tool holder (from Gildemeister or IMG Attachments) All longitudinal units are equipped, either fixed or rotating (without collets) A gear set for one speed is installed A gear set for one cycle time is installed The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more information and pictures on mail(at) or Pgjdjx Hgkcjpfx Ah Heg *

Condition: used, Year of construction: 2008, weight of the machine ca. 8,8 t dimensions of the machine ca. 4500x1990x2300 mm Number of controlled spindles (C axes): 2 Number of controlled axes: 8 Number of channels: 3 Max. bar diameter: 65 mm Bore in tie rod: 75 mm Chuck diameter: 175 mm Spindle nose: 140 mm Max. speed: 5,000 rpm Nominal torque: 191 Nm Nominal power: 20 kW DATA FOR THE W2 AXIS OF THE COUNTER SPINDLE Stroke: 690 mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 2,400 N X1 AXIS DATA Stroke: 165 mm Rapid traverse: 40 m/min Max. acceleration: 10 m/s² Nominal force: 2,400 N Z1 AXIS DATA Stroke: 678 mm Rapid traverse: 30 mm Max. acceleration: 5 m/s² Nominal force: 5,000 N Y1 AXIS DATA Stroke: 80(+50/-30) mm Pedoyat Hvepfx Ah Hegg Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 5,000 N X2 AXIS DATA Stroke: 165 mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 5,000 N Number of tool stations: 12 Tool holder diameter: 30 mm Driven stations: 12 mm Max. speed of driven tools: 4,000 rpm Translated with (free version)

Condition: good (used), Year of construction: 1998, 4196 GM 25: Bar feeder year 2001 / GM 25 year 1991 3330 AS 25: Bar feeder year 2001 / GM 25 year 1969, completely overhauled in 1992 4423 GM 26: Bar feeder year 1998 / GM 26 year 1998 4283 GM 26: Pgjdpfx Ahjx S E Svo Hsg Bar feeder year 2000 / GM 26 year 1995

Condition: used, Year of construction: 2011, turning diameter 0700 mm turning length 800 mm control 840D Siemens turret head 12 Pgsdox Sy U Ejpfx Ah Hsg swing over bed 380 mm spindle turning speed - stepless 10- 5000 rpm spindle bore 67 mm feed - longitudinal/cross 20000 mm/min rapid travel - longitudinal/face 30 m/min dimensions 5000 x 2800 x 2000 mm total power requirement 65 KVA weight of the machine ca. 7,5 t Machine has C-axe and 6 live tooling positions

Condition: good (used), Year of construction: 1995, Centre height: 330 mm Centre distance: 2000 mm Working area: Max. turning diameter over bed cover: 650 mm Max. turning diameter over cross slide: 360 mm Main spindle: Spindle diameter at front bearing: 140 mm Spindle bore: 107 mm Main drive: 58.5 kW 2-speed spindle range: 4 – 750 rpm / 750 – 3060 rpm Pgodpfxex Sx Hts Ah Hjg Feed drive: Rapid traverse X-/Z-axis: 10/10 m/min Turret: Number of tool positions: 12 Driven tool positions: 6 Tool shank holder: VDI 50 mm Dimensions / Weight: Required floor space (L x W x H): approx. 6400 x 2150 x 2000 mm Weight: 9400 kg Accessories / Special features: • CNC path control GRUNDIG EPL 2 with color monitor • Spindle orientation C-axis • 12-station turret, VDI 50, with 6 driven tools, SAUTER brand • Hydraulic 3-jaw chuck • Hydraulic tailstock • Chip conveyor • Extraction unit, LTA brand • CE-compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel