Used Gildemeister Gdm 90 for sale (228)

Condition: good (used), Year of construction: 2002, Gildemeister NEF 520 K Bcsdpfx Aow Iqd Ieffst Gildemeister NEF 520 K Cycle-Controlled Lathe with Siemens Sinumerik 810 DL Control, year of manufacture 2012, in excellent original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. Technical Details Swing diameter over bed: 500 mm Swing diameter over cross slide: 290 mm Turning length: 1,250 mm Control: Siemens Simatic Cross slide travel: 260 mm Distance between centers: 1,500 mm Main Spindle: Speed range – main spindle: 8 - 3,000 rpm Drive power – main spindle: 12 kW Max. torque: 920 Nm Gear stages: 2 Spindle nose: No. 8 DIN55027 Spindle diameter in front bearing: 120 mm Max. bar capacity: 62 mm Spindle mount: ME80 Chuck diameter: 250 mm Tool Turret: Tool system: MultiFIX - C Tailstock: Quill diameter: 80 mm Quill taper: MT 5 Quill stroke: 180 mm Feed Rates: Rapid traverse x/z: 4 / 6 m/min Feed force x/z: 5 / 10 kN Total power requirement: 28 kVA Machine weight approx.: 3.0 t Space requirements approx.: 3.5 x 2.5 x 2.0 m Accessories and Equipment: 1 coolant system About the machine: We are offering a Gildemeister NEF 520 K cycle-controlled lathe, year of manufacture 2012, in very good condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. Even at high speeds, the Gildemeister operates very quietly. This latest generation of lathes is extremely user-friendly and can produce surface finishes comparable to grinding. Take the opportunity to inspect the machine under power at our premises and see its condition for yourself.

Condition: good (used), Year of construction: 2006, Gildemeister Twin 42, Year of manufacture 2006, Siemens 840 D control, Turning length up to 210 mm, Spindle bore 56 mm, Main spindle, Counter spindle, 1 x Y axis, Bedpewcyhtefx Affjct 2 x C axis, 2 12-station turrets / all stations driven, Shaft diameter 25 mm, Driven tools up to 6,000 rpm, FMB Turbo 10-72 loading magazine, Main spindle collet chuck, Counter spindle collet chuck

Condition: like new (used), Year of construction: 2009, operating hours: 26,000 h, travel distance X-axis: 725 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 300 mm, spindle motor power: 11 W, spindle speed (min.): 5,000 rpm, total length: 3,171 mm, total height: 2,648 mm, total width: 4,254 mm, overall weight: 6,000 kg, CNC controller: SIEMENS SINUMERIK 840D-ERGOLINE Capacity X-axis travel mm: 725 Y-axis travel mm: ± 50 Z-axis travel mm: 300 Turning length mm: 160 Max. turning diameter mm: ø: 250 Swing over bed mm: ø: 320 Tool magazine Magazine places: 16 Tool holder: VDI-30 Tool length max. mm: 390 Tool diameter max. mm: 140 Lower turret Number of tool slots St .: 12 Speed driven tools RPM: 4.000 Drive power driven tools kW: 11,7 Milling function: Yes Main spindle Speed spindle rpm: 5.000 Drive power spindle kW: 11,7 (40% ED) Maximun torque Nm: 280 / 360 (100% / 40% ED) Coolant system Tank capacity liter: 980 L High-pressure bar: 8 / 20 Equipment Chip conveyor Bcedpfx Afoxf Hlbefet CE conformity Coolant gun Air blast / coolant switch-over Internal coolant supply Paper band filter Automatic workpiece magazine loader - 16 positions x ø 220 Working time hours Under power: 38.000 Cutting Time: 26.000 Basic machine dimensions / weight Length mm: 3.171 Width mm: 4.254 Height mm: 2.648 Weight kg: 6.000

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, turning length: 1,185 mm, turning diameter: 640 mm, spindle speed (max.): 4,000 rpm, turning diameter over bed slide: 640 mm, counter spindle torque (max.): 5,000 Nm, Turning and Milling Center with Main and Counter Spindle and Comprehensive Equipment! TECHNICAL DETAILS Turning diameter: 640 mm Turning length: 1,185 mm Swing diameter: 640 mm Distance between headstocks: 1,500 mm SLIDE I X-Axis travel: 550 mm Y-Axis travel: 180 mm Z-Axis travel: 1,185 mm B-Axis: 240° Feed rate X-axis: 0 – 40,000 mm/min Feed rate Y-axis: 1 – 24,000 mm/min Feed rate Z-axis: 1 – 70,000 mm/min Feed rate B-axis: 1 – 20 rpm Rapid traverse X/Y/Z: 40 / 24 / 70 m/min Feed force X/Y/Z S6: 7.00 / 11.00 / 7.50 kN Tool interface: HSK 63 Milling spindle speed: 10 – 12,000 rpm Drive power 100% duty cycle: 13.20 kW Drive power 40% duty cycle: 22.00 kW Milling spindle torque: 60 / 100 Nm Max. tool length: 350 / 200 mm Tool diameter: 80 mm Tool diameter with 2 free pockets: 120 mm Max. tool weight: 6 / 10 kg SLIDE II Bcjdpfoxf A Edex Affjt X-Axis travel: 180 mm Z-Axis travel: 1,050 mm Feed rate X-axis: 1 – 24,000 mm/min Feed rate Z-axis: 1 – 36,000 mm/min Rapid traverse X + Z axes: 24 / 36 m/min Feed force Z / X S6: 11.00 / 9.00 kN Turret (positions): 12 Tool holder: DIN 69880 Ø40 Driven tool positions: 12 Speed: 1 – 4,000 rpm Drive power 100% duty cycle: 10.70 kW Torque S1: 32 Nm SLIDE III Z-Axis travel: 1,150 mm Feed rate Z-axis: 1 – 36,000 mm/min Rapid traverse Z-axis: 36 m/min Feed force Z-axis S6: 13.00 Nm MAIN SPINDLE Model: ISM90 Speed: 10 – 4,000 rpm Drive power 100% duty cycle: 36.00 kW Drive power 40% duty cycle: 45.00 kW Torque at 40% / 100% duty cycle: 800 / 630 Nm Spindle bore: 80 mm COUNTER SPINDLE Speed: 10 – 5,000 rpm Drive power 100% duty cycle: 21.00 kW Drive power 40% duty cycle: 28.00 kW Torque at 40% / 100% duty cycle: 320 / 240 Nm Spindle bore: 80 mm MACHINE DETAILS Electrical Data Total power requirement: 70.00 kW Dimensions & Weight Machine weight: approx. 20.00 t Footprint: approx. 8.50 x 4.50 x H3.10 m Control Control manufacturer: Siemens Control model: SINUMERIK 840D EQUIPMENT Chip conveyor Oil mist separator DMG Automation WH10top Main spindle ISM90: Hollow chuck, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Counter spindle ISM76: Partial hollow chuck, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Pick-off unit with integrated conveyor belt Automatic safety cover Differential pressure clamping With pump stand for coolant: Pump 1: 17 l/min at 80 bar / Pump 2: 20 l/min at 8 bar / Pump 3: 40 l/min at 20 bar Hainbuch collet chuck including collets Ø30, 45, 50, 55, 60, 65, 72, 82, 85, 90 1 workpiece pick-off for turret

Condition: used, Year of construction: 2003, turning diameter 210 mm turning length 580 mm control 840 D Siemens centre height 190 mm turning diameter over bed 330 mm turning dia. over face-slide 260 mm turning speed range - main spindle max. 4.000 min/-1 power capacity - main spindel 10 / 7,5 kW max. Torque 115 / 86 Nm spindle bore 68,5 mm max. usable bar diameter 51 mm C - Axis 0,001 ° travel -x axis 185 mm travel -z axis 455 mm number of toolpositions 12 pos. Bcodpfx Aotqmmusffjt tool taper VDI 30 Driven Tool Stations: 6 pos. tailstock adjustment 400 mm intake pressure max. 4.000 N rapid traverse X: 20 / Z: 30 m/min Feed force ( X / Y / Z ) 4,5 kN total power requirement 21 kW weight of the machine ca. 3,2 t dimensions of the machine ca. 8,0 x 2,2 x 2,0 m CNC Turning- and Milling Center GILDEMEISTER - CTX 310 V3 - incl. bar loading magazine IRCO Breuning - incl. 2x collet chucks - incl. 2x jaw chuck including various clamping jaws - various VDI30 rotary holders - various reducing tubes - approx. 20x collets 173E - Pressure sleeve for collets 185E (for bars up to Ø50) - 11x collets 185E

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 5601-0106, turning length: 320 mm, spindle speed (max.): 10,000 rpm, overall weight: 2,800 kg, bar passage: 33 mm, equipped with Iemca Boss 542 new in 2000 – well tooled – Ge Fanuc 18i-T Control Bodpfx Aexn R N Aoffjct

Condition: like new (used), Year of construction: 2001, Gildemeister NEF 320 K Cycle-Controlled Lathe Siemens Sinumerik 810 DL Control Year of Manufacture: 2001 Very Good Original Condition Technical Specifications: Year of manufacture: 2001 Swing diameter over bed: 320 mm Swing diameter over cross slide: 150 mm Centre distance: 750 mm Bcodpfx Afowx Rbpjfet Cross travel: 185 mm Feed X: 4 m/min Feed Y: 4 m/min Rapid traverse X: 8 m/min Rapid traverse Y: 10 m/min Spindle nose DIN 55027 size 6 Spindle bore: 52 mm Drive power (100%): 7 kW Speed range: 14–3550 rpm (2 ranges) Tailstock quill diameter: 70 mm Tailstock quill stroke: 120 mm Tailstock taper: ISO MK 5 Dimensions: 2600 x 1440 x 1440 mm Machine weight approx.: 2.0 t Accessories and Equipment: About the Machine: Offered here is a Gildemeister NEF 320 K cycle-controlled lathe with cycle control, year 2001, in very good original condition. The machine is, of course, fully operational. The slides run very smoothly and evenly. Even at high speeds, the Gildemeister operates very quietly. This latest generation of lathes is very user-friendly and allows for surface finishes similar to grinding. The machine comes from a training workshop of a large industrial company. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Condition: good (used), Year of construction: 1999, Machine has 12,300 operating hours Gildemeister NEF 320 / cycle lathe, Year of manufacture: 1999, Control: Manual Plus, Centre distance: 750 mm, Swing diameter over bed: 320 mm, Spindle speed up to 4,000 rpm, 2 gearbox stages, Bcedpfxow Rm Tdo Affet Multifix toolholder, Tailstock, 2 steadies, Accessories,

Condition: good (used), Year of construction: 1984, functionality: fully functional, Swing diameter over bed 560 mm Swing diameter over cross slide 250 mm Spindle bore 65.3 mm Power Max. 15 KW Speeds 11.2 - 2,240 rpm Centre width 1,000 mm Quill diameter 80 mm Quill mount MK 5 Incl. chip conveyor Incl. complete documentation Bsdpfx Afjvn Rlzsfjct

Condition: used, Year of construction: 2011, Lathes Travel distance X: 270 mm Travel distance Y :120 mm Travel distance Z: 1200 mm turning length: 1135 mm max. turning diameter: 700 mm max. circulation diameter: 340 mm max. turning moment: 680 NM range of revolutions till: 4000 rpm Control: DMG powered tools Powered tools: 50 Scrapper chip conveyor Short bar loader magazine IRCO ILS-RBK 100/16 Various main spindle reduction sleeves NC-controlled workpiece removal device Conveyor belt for transporting the workpieces out of the machine Bcsdpfx Afswwv Ifsfot Coolant system 8/20 bar with immersion cooler Coolant spray gun Chip conveyor Oil mist extraction system Control cabinet cooling unit (up to 40 °C) 4-color signal light, connection for bar loader magazine Main spindle as integrated spindle motor ISM 102 Counter spindle as integrated spindle motor ISM 76 Easy-Tool Monitor Approx. 40 various quick-change collets size 100 (entire stock) Pneumatic changeover device Ø 100 mm Approx. 50 various tool holders, static and driven (entire stock) Installation elements Documentation

Condition: used, Year of construction: 2013, turning diameter max. 20 mm turning length max. 80 mm control Fanuc 310is Main spindle: max. usable bar diameter 20 (25) mm inner draw tube diameter 28,5 mm Max. speed main spindle 10.000 min/-1 power capacity - main spindel 3,7 kW max. Torque 9,4 Nm C-Axis C1: 360 ° Subspindle: inner draw tube diameter 28,5 mm Max. speed main spindle 10.000 min/-1 power capacity - main spindel 3,7 kW max. Torque 9,4 Nm C-Axis C2: 360 ° axis stroke: x-axis 1: 50 / 2: 240 mm y-axis 1: 350 / 2: 120 mm z-axis 1: 80 / 2: 300 mm Linear tool panel carrier for slide 1: number of toolpositions 17 pos. inner processing 6 pos. outer processing 6 pos. driven statition 5 pos. Shank diameter 20 mm Bjdpfxstqmnnj Affoct shaft cross cut 12 x 12 mm collet diameter ESX / ER 16 tool spindle speed range 3x 3.450 / 2x 6.000 min/-1 power capacity - driven tool-stations 5x 0.98 kW max. Torque 3x 4 / 2x 2,3 Nm Linear tool panel carrier for slide 2: number of toolpositions 13 pos. inner processing 4 outer processing 4 driven statition 5 pos Shank diameter 20 mm shaft cross cut 12 x 12 collet diameter ESX / ER 16 tool spindle speed range 3x 3.450 / 2x 6.000 min/-1 power capacity - driven tool-stations 5x 0,98 kW max. Torque 3x 4 / 2x 2,3 Nm feeds: rapid traverse ( X / Y / Z ) max. 40 m/min feed power max. 2,5 kN Accelaration max. 5 m/s² total power requirement 56 kVA weight of the machine ca. 4,8 t dimensions of the machine ca. 8,0 x 2,5 x 2,0 m CNC-Short-Lathe GILDEMEISTER - Sprint 20-8 - 8 Achsen ( 2x X / 2x Y / 2x Z / 2x C ) - Main- and Subspindle - Bar-Feeding-Magazine FMB turbo 3-36/ 3200A - Coolant System DELTATHERM

Condition: used, Year of construction: 1998, operating hours: 97,593 h, functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. A video of the machine in operation prior to disassembly is available upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DATA Control: Sinumerik 840C Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Main Drive Power Output: 28 / 21 kW Speed Range: 25 – 4,500 rpm Torque: 320 / 240 Nm Maximum Feed Rate for Thread Cutting: 10 m/min C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Tool Carrier Number of Tool Stations: 8 Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Maximum Speed of Tool Carrier 1: 4,000 rpm Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Slide 2 Cross Travel / Longitudinal Travel: 82 / 120 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN MACHINE DATA Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Accessories: Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Delivery ex works excluding packaging and insurance, unless otherwise agreed. Bcedpfx Aswym Nfjffst The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Condition: used, TECHNICAL DETAILS Bcedsuy Uywepfx Affot - Max. bar diameter : 12,7 [mm] - X stroke : 85 [mm] - Y stroke : 150 [mm] - Z stroke : 160 [mm] - Spindle speeds : 12000 [rpm] - Number of axes : 5 EQUIPMENT - CNC : Fanuc 18 i-T - Bar loader : IEMCA CH 220 Type 32 L - Oil mist extractor : LTA Basic line 01

Condition: good (used), Year of construction: 1999, Gildemeister MF Twin 65, year of manufacture 1999, Siemens 840 D control, travel X/Z 190/555 mm, 1 x Y axis +/- 40 mm, 2 turrets with 12 stations each, driven tools, VDI 30 mounting, C axis, spindle speed up to 6,000 rpm, max. bar capacity up to 65 mm, bar feeder is included but no longer installed on the machine. Bedpfxjw Swcxe Affsct

Condition: used, Year of construction: 2004, Technical data: Main spindle: Max. turning diameter: 33 mm Max. speed: 8000 1/min Drive power: 5.5 kW Drive power at 60% duty cycle: 7.5 kW Slide 1: Slide travel Z1: 320 mm Slide travel X1: 50 mm Slide travel Y1: 255 mm Rapid traverse speed: 30 m/min Ball screw diameter: 25 mm Tool holder slide 1: Number of tools stationary with tool shank 16 x 16: 5 pieces Bjdetzyx Tspfx Affjct Slide 2: Slide travel X2: 165 mm Slide path Z2: 200 mm Rapid traverse speed: 30 m/min Ball screw diameter: 30 mm Tool holder slide 2: Number of stations for turret with integrated spindle: 8 pieces Number of axially driven tools (integrated): 8 pieces Coolant tank, approx.: 400 l Coolant pump, max. output: 80 l/min Dimensions (LxWxH), approx.: 2460 x 1510 x 1750 mm Equipment: - CNC control Fanuc iT - Workpiece unloading system - IEMCA bar loading magazine - 5-pos. tool carrier plate for slide 1 - Electrical interface and software for bar loading magazine - Collet chuck holder for main and pick-up spindle - 2 Double drill holder for rear machining support with cylinder - Pick-up spindle workpiece pusher

Condition: excellent (used), Year of construction: 2017, operating hours: 20,000 h, functionality: fully functional, spindle speed (max.): 6,500 rpm, bar passage: 42 mm, bar diameter (max.): 42 mm, Production lathe Gildemeister Sprint 42 - 8 linear axes with high-pressure system and Iemca bar feeder Year of manufacture: 2017 Control: Fanuc 31i Operating hours: ~20,000h Version with 8 axes – linear drive on X1 axis Main and counter spindle speed: 6,500 rpm Max. bar capacity: 42mm Coolant system: Slide 1: 8 bar Slide 2 + Y: 20 bar Bar feeder: Iemca BOSS 552/32 Bcjdpfx Asxbpp Uoffot Parts conveyor belt

Condition: used, Year of construction: 2004, turning diameter max. 560 mm turning length 600 mm control 840D powerline Siemens greates pass round over bed 680 mm Swing dia. over traverse guideway 565 mm centre distance 620 mm turning speed range - main spindle 20 - 5.000 min/-1 power capacity - main spindel 25 / 37 kW max. Torque 390 Nm spindle nose 170H5 spindle bearing diameter 120 mm usable bar diameter 65 mm max. chucking diameter 250 mm C-Axis 0,025° / 360 ° Spindle speed range subspindle 20 - 7.000 min/-1 power capacity - Sub spindle 25 / 33 kW max. Torque 213 Nm spindle bearing diameter 90 mm spindle bore 57 mm spindle nose 140H5 C-Axis 0,025° / 360 ° number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Bcodpfxowmf Tps Affot Spindle speed - driven tools max. 4.500 min -1 power capacity - driven tools 12,2 kW tool taper VDI 40 DIN 69880 Tool dimensions with square shank 40 mm x-axis 185 mm y-axis 80 mm z-axis 620 mm rapid traverse X: 60 m/min rapid traverse Y: 15 m/min rapid traverse Z: 45 m/min total power requirement 50 kVA weight of the machine ca. 7 t dimensions of the machine ca. 6,0 x 3,0 x 2,5 m CNC Turning- and MillingCenter GILDEMEISTER - CTX 420 linear V6 - Main and sub spindle - Tool drive - C axis / Y axis - Partial hollow clamping device - ShopTurn - Surface - Package bar processing consisting of: - Hollow clamping device 66mm - Workpiece picking device - Incl. 2x driven tools - Incl. 4x double tool holders - Incl. 4x tool holders - Incl. 83x tools

Condition: good (used), Year of construction: 1997, - Control system: SIEMENS SINUMERIK 840-C - Max. bar diameter: 65 mm - C-axis - Main spindle speed: 31 - 6,300 rpm - Turret 1: 8 stations, 4 of which are powered Bjdpsxa Epbofx Affjct - Turret 2: 8 stations, 4 of which are powered - Driven tool speed: 4,000 rpm - Both turrets with internal cooling - High-pressure unit - Chip conveyor - Bar feeder IRCO SiMag 65 - Max. bar length: 3,200 mm Dimensions LxWxH: - Machine: 3,400 x 1,700 x 1,800 mm - Bar feeder: 4,000 x 1,000 x 1,400 mm - Chip conveyor: 3,000 x 1,100 x 1,600 mm Total weight: approx. 6,000 kg

Condition: used, Year of construction: 2003, max. Spindle speed 5000 U/min. travel -x axis 160 mm travel -z axis 450 mm numbers of turret head positions 12 tool taper VDI 30 Control Heidenhain iT Plus Dimensions (L x W x H) 4,5 x 2,5 x 2,5 m weight of the machine 3700 kg Bsdjv Ehawopfx Affjct CNC Turning- and Milling Center | DMG GILDEMEISTER - CTX 310 Additional equipment: - C-Axis The machine is in good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: CTX310 | CTX-310

Condition: repair required (used), Year of construction: 2011, operating hours: 8,545 h, functionality: not functional, turning length: 310 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 190 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 370 mm, mount diameter: 30 mm, Condition: Non-functional. The machine has an unknown malfunction in the turret, making referencing and axis movement impossible. The machine requires repair! TECHNICAL DETAILS Turning length: 310 mm Swing diameter over bed: 500 mm Swing diameter over cross slide: 290 mm Distance between centers: 500 mm X-axis travel: 190 mm Z-axis travel: Z1: 335 / Z3: 370 mm Y-axis travel: 80 mm Control: Heidenhain CNC Pilot 4290 Spindle speed: 6,000 rpm Spindle bore: 73 mm Bar capacity: 50 mm Bjdpfjw T Srdox Affsct Main spindle torque: 95 Nm at 100% and 127 Nm at 40% Tool turret - number of stations: 12 Tool holder: VDI 30 mm Rapid traverse X + Z axes: 30 m/min MACHINE DETAILS Total power requirement: 20 kVA Chip conveyor dimensions (LxWxH): 3.2 x 0.45 x 1.5 m Operating hours (on-time): 36,443 h Spindle hours: 8,545 h Interface: yes EQUIPMENT - 160 mm 3-jaw chuck with matching flange - 2 sets of spare jaws - 12-station turret with driven tooling - Sauter disc turret (C-axis = 300 rpm) - Chip conveyor 450 K-1/250; year of manufacture 2000 - Manual chuck fitted – no hydraulic chuck - Electrical cabinet with Rittal cooling

Condition: used, Year of construction: 2006, Technical data: Working area: Max. swing diameter: 680 mm Swing diameter over X-guideways: 565 mm Chuck diameter: 250 / 315 mm Cross travel (X): 315 mm Longitudinal travel (Y): 1350 mm Headstock: Spindle diameter in front bearing: 150 mm Spindle bore: 107 mm Main drive: Main three-phase drive power: 36 / 45 kW Torque (100% duty cycle / 40% duty cycle): 600 / 750 Nm Speed range (100% duty cycle): 20 - 3200 rpm Speed range (40% duty cycle): 20 - 4000 rpm Tool turret: Number of tool stations: 12 Bcjdpfx Afjwym Inofet Shank diameter: 50 mm Indexing time for 30°: 0.16 sec Tailstock: Tailstock quill travel: 1200 mm Quill stroke: 120 mm Quill diameter: 120 mm Quill taper: MT 5 Coolant system: Capacity: approx. 220 l Pump output: 1.7 kW Delivery rate at 6 bar: 20 l/min Connected load: approx. 65 kVA Dimensions (LxWxH), approx.: 5560 x 2115 x 2050 mm Weight without chip conveyor, approx.: 9500 kg Equipment/features: - CNC control SIEMENS SINUMERIK 840D powerline with Shop Turn - Single-row turret with 12 fixed tool stations - Hinged belt chip conveyor

Condition: used, Year of construction: 2001, turning diameter over bed 320 mm turning diameter over slide rest 150 mm turning length 750 mm cross movement 185 mm turning speeds 14 - 3550 U/min centre height 160 mm spindle bore 52 mm tailstock quill taper MT 5 MK tailstock travel 120 mm tailstock quill diameter 70 mm rapid traverse X-axis 2000 mm/min Bcjdpfx Afjxfwcqjfet rapid traverse Z-axis 2000 mm/min Control SINUMERIK 810 spindle drive 7,0 kW total power requirement 11,0 kW weight of the machine ca. 2,0 t dimensions 2,6 x 1,4 x 1,4 m Cycle lathe - 200mm chuck with reversible jaws - Multifix tool post - Machine feet - Documentation

Condition: used, Year of construction: 2009, turning length 600 mm max. turning diameter 320 mm swing diameter above cross guideway 365 mm control CNC Pilot 4290 Heidenhain turning speed range - main spindle max. 5.000 min/-1 power capacity - main spindel 28 / 21 kW max. Torque 320 / 240 Nm Bcodpfxstqmrrj Affet spindle nose 170h5 chucking diameter 215 mm spindle diameter in front bearing 130 mm spindle bore 87 mm max. bar capacity 65 mm number of toolpositions 12 pos. tool taper VDI 30 Number of driven toolspositions 12 pos. tool spindle speed range max. 4.500 min/-1 power capacity driven tool-stations 3,1 kW max. Torque 10 Nm x-travel 250 mm z-travel 635 mm tailstock 580 mm taper of center MK 4 diameter of quill 120 mm quill stroke 150 mm rapid traverse X: 24 / Z: 30 m/min total power requirement 44 kVA weight of the machine ca. 5,6 t dimensions of the machine ca. 4,5 x 2,0 x 2,0 m CNC Turning- and Milling Center Gildemeister - CTX 410 V3 - driven tool-stations - ca. 7.900h spindle-hrs.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, CNC Lathe Manufacturer: Gildemeister Model: CTX 420 linear V3 Year of Manufacture: 2003 Control Unit: Heidenhain Plus IT Swing diameter over bed: 680 mm Swing diameter over cross slide: 565 mm Cross travel: 260 mm Longitudinal travel: 635 mm Drive power (40/100%): 25/37 kW Speed range: 20 – 5000 rpm Weight approx.: 6500 kg Equipment: Driven tools: 12 stations Tool turret: 12-position Sauter turret VDI 30 Partly hollow clamping chuck Tailstock Automatic quill travel Quill taper: Mk 5 Chip conveyor Measuring arm Oil mist extraction unit Bjdsxc Uq Tspfx Affsct Subject to prior sale and errors.

Condition: used, Year of construction: 2010, turning diameter max. 410 mm turning length 1.235 mm control IT / Turn Plus Heidenhain greates pass round over bed 700 mm turning speed range - main spindle max. 4.000 min/-1 power capacity - main spindel 35 / 45 kW max. Torque 770 Nm spindle head 220 h5 spindle diameter in front bearing 160 mm max. usable bar diameter 95 / 104 mm C-Axis 0,001 ° number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Spindle speed - driven tool stations max. 4.000 min -1 power capacity driven tool-stations 12 kW max. Torque 36 Nm tool taper VDI 40 DIN 69880 turret change time 30°: 0,4 sec. Y - Axis 120 (+/- 60) mm x-axis 300 mm z-axis 1.300 mm y-axis +/- 60 mm tailstock 1.200 mm taper of center MK 5 clamping capacity 1.400 daN rapid traverse ( X / Y / Z ) 30 / 22,5 / 30 m/min Bcedpfxevzhiwj Affjt total power requirement 60 kVA weight of the machine ca. 7,7 t dimensions of the machine ca. 6,0 x 3,5 x 2,5 m CNC - Turning- and Millingcenter GILDEMEISTER - CTX beta 1250 V4 - Tailstock - Y-axis - Tool drive - Direct measuring system - Bar machining package - Connection for bar feed / bar loading magazine