Used Gildemeister Ctx 500 E for sale (246)

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 02260001501, turning length: 600 mm, turning diameter over cross slide: 324 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 185 mm, travel distance Z-axis: 635 mm, indexing of C-axis: 0.025 °, TECHNICAL DETAILS Control system: SIEMENS Max. circulation diameter: 680 mm Circulation diameter via X-guide: 565 mm Max. turning diameter: 324 mm Max. turning length: 600 mm Main spindle Spindle head diameter (flat flange): 170h5 mm Max. bar diameter: 65 mm Spindle diameter (front bearing): 120 mm Spindle bore: 79 mm Drive power S1, 100% ED: 25 kW Speed range: up to max. 5,000 rpm Torque S1, 100% ED: 270 Nm Buckling speed: 900 rpm C-axis (main spindle) Speed: 250 rpm Holding torque: 200 Nm Pitch accuracy: 0.025° Cedpeu T Hmmsfx Abgsri Counter spindle Spindle head diameter (flat flange): 140h5 mm Max. bar diameter: 42 mm Spindle diameter (front bearing): 90 mm Spindle bore: 57 mm Drive power S1, 100% ED: 25 kW Speed range: up to max. 7,000 rpm Torque S1, 100% ED: 160 Nm Buckling speed: 1,500 rpm C-axis (counter spindle) Speed: 250 rpm Holding torque: 120 Nm Pitch accuracy: 0.025° Cross slide (X/Y/Z) Face travel (X): 185 mm Longitudinal travel (Z): 635 mm Vertical travel (Y): +40 mm Rapid traverse speed (X/Y/Z): 60/15/45 m/min Feed force (X/Y/Z): 3.5/7/7 kN Ball screw (Y): 40x5 mm Ball screw (Z): 40x15 mm Counter spindle (Z2) Longitudinal travel: 666 mm Input speed: 45 m/min Ball screw: 40x15 mm Tool carrier Driven tools: 12 Shank diameter (VDI 69880): 40 mm Max. power: 9.4 kW Torque: 20 Nm Speed range: up to max. 4,500 rpm MACHINE DETAILS hydraulic system Capacity: 10 l Pump output: 2.2 kW Max. pressure: 80 bar Clamping device and tailstock pressure: 10-60 bar Coolant device Capacity: 210 l Pump capacity: 1.7 kW Delivery rate (at 6 bar): 20 l/min Electrical power requirement Connected load: 50 kVA Operating voltage: 400 V Frequency: 50 Hz Fuse protection: 80 A Voltage fluctuation: +6%/-10% Bar loader Manufacturer: Breuning Notes - The tools shown in the turret are not part of the auction. - The collets for the collet chuck are included.

Condition: ready for operation (used), operating hours: 31,819 h, turning diameter over cross slide: 290 mm, turning length: 600 mm, travel distance X-axis: 210 mm, travel distance Z-axis: 645 mm, rotational speed (max.): 5,000 rpm, - CNC lathe with EPL 2 control, equipped with round magnet. It was last used for fine contour turning of hardened components. (without chuck, tailstock and chip conveyor) Technical data Swing diameter over bed: 300 mm Swing diameter over face: 290 mm Crsdpjqcu Uvofx Abgoi Travel path X: 210 mm Travel path Z: 645 mm Speed range: 25 - 5000 rpm Tool carrier: universal disk turret Tool positions: 12 Tool holder: 30 mm (DIN 69 880)

Condition: used, Year of construction: 2007, turning diameter 246 mm Cjdpjxuv R Sofx Abgsri turning length 445 mm control Fanuc 32 weight of the machine ca. 4250 kg

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Hello, I am offering for sale a renowned brand CNC lathe: DMG GILDEMEISTER CTX 420 Linear V4 with C-axis, Y-axis, and driven tools. The machine is in excellent technical and visual condition. _ Type: CNC Lathe Manufacturer: DMG GILDEMEISTER Model: CTX 420 V4 Linear Control: HEIDENHAIN 4290 + DIN PLUS interface for program generation Country of manufacture: Germany Year of manufacture: 2004 _ Machine specifications: - Turret: 12 tools with VDI 40 holders (all stations are driven) - Max spindle speed: 5,000 rpm - C-axis - Y-axis Credpfx Aoxcupcobgsi - Driven tools - Max turning length on Z-axis: 635 mm - Max turning diameter on X-axis: 325 mm - Spindle chuck BERG, diameter 200 mm - Max bar diameter: 66 mm - Coolant system - Hydraulic tailstock, programmable - Chip conveyor - Spindle drive power: 21 kW - LNS bar feeder - Documentation (DTR) - Machine weight: 6 tons _ WHY IS IT WORTH BUYING MACHINES FROM PPM? - We offer our own stationary and mobile service support - We have sold over 700 DMG machines - We can commission the machine at the customer's site - Operator training and delivery included in the price - All our machines undergo a professional technical inspection and are ready for operation - The machine can be purchased via installment plan or leasing.

Year of construction: 1998, condition: ready for operation (used), Control Unit Brand HEIDENHAIN Additional Equipment Noise emission values: 77 dB (continuous sound pressure level) This Gildemeister CTX600E was manufactured in 1998. It features a turning length of 1000 mm, a spindle bore of 107 mm, and a chuck size of 315/400 mm. The machine offers a spindle speed range up to 3600 rpm and includes a 12-station turret with 6 driven tool stations. Ideal for precise horizontal turning, it supports a maximum turning diameter of 520 mm. Contact us for more information about this machine. Codsxirlnspfx Abgjri Application Types Turning

Year of construction: 2006, condition: ready for operation (used), Turning diameter over bed/face slide: 500mm/290mm, face travel: 260mm, turning length: 1000mm, spindle bore: 70mm, speed: 3050rpm, torque: 920Nm, rapid traverse X/Z: 8m/min/10m/min, feed X/Z: 5m/min, quill stroke: 180mm, quill diameter: 80mm. Machine dimensions X/Y/Z: approx. 3400mm/2000mm/1850mm, weight: approx. 3100kg. Documentation available. On-site inspection is possible. Csdpfx Asvnd Tljbgeri

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, I have for sale a renowned brand CNC LATHE GILDEMEISTER CTX 310 V3 with driven tools, C axis. _ Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 310 V3 Control: HEIDENHAIN 4290 + TURN PLUS Overlay Country of manufacture: Germany Year of manufacture 1999 _ Machine parameters: - head: 12 - tools for VDI 30 holders (Every second socket driven) - max. rpm 6300/min. - max. turning length in the Z axis: 455 mm - max. turning diameter in the X axis: 200 mm - C axis Crjdpfx Absvmy Icsgoi - driven tools - holder on the main spindle: Fi-200mm - max. shaft diameter Fi-51 mm - finished part collector - cooling system - chip conveyor - spindle drive power: 11 KW - DTR - machine weight: 3.2 tons _ WHY IS IT WORTH BUYING MACHINES in PPM? - we have our own service _ stationary and mobile - we have already sold over 700 DMG machines - possibility of starting the machine at the customer's - operator training and delivery of the machine to the customer included in the price - all our machines have undergone a professional technical inspection - 100% ready to work - purchase of the machine is possible through the installment system and leasing.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Hello I have for sale a renowned brand CNC LATHE GILDEMEISTER CTX 400 V3 with driven tools and C axis. _ Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 400 V3 Control: HEIDENHAIN 3190 + TURN PLUS Overlay Country of manufacture: Germany Year of manufacture 2000 _ Machine parameters: - head: 12 - tools for VDI 30 holders (every second socket driven) - max. rpm 5000/min. - max. turning length in the Z axis: 640 mm - max. turning diameter in the X axis: 290 mm - C axis - driven tools - BERG KH 200 spindle holder - max. shaft diameter Fi-65 mm - finished part collector - cooling system - hydraulic tailstock - chip conveyor - spindle drive power: 21 KW - DTR Csdpfxstpuh Aj Abgori - machine weight: 5.2 tons _ WHY IS IT WORTH BUYING MACHINES at PPM? - we have our own service _ stationary and mobile - we have already sold over 700 DMG machines - possibility of starting the machine at the customer's - operator training and delivery of the machine to the customer included in the price - all our machines have undergone a professional technical inspection - 100% ready to work - purchase of the machine is possible through the installment system and leasing.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Hello I have for sale a renowned brand CNC LATHE DMG GILDEMEISTER CTX 500 V3 with C axis and driven tools. The machine is in very good technical and visual condition. _ Type: CNC Lathe Manufacturer: DMG GILDEMEISTER Model: CTX 500 V3 Control: HEIDENHAIN 3190 + TURN PLUS overlay for generating programs Country of manufacture: Germany Year of manufacture 1998 _ Machine parameters: - head: 12 - tools for VDI 40 holders (every second socket driven) - max. rpm 3500/min. - C axis - driven tools - max. turning length in the Z axis: 1150 mm - max. turning diameter in the X axis: 500 mm - BERG spindle holder Fi-315 mm - max. shaft diameter Fi-91 mm - cooling system - hydraulic tailstock - controlled from the program - chip conveyor Credpeu Aauxefx Abgji - spindle drive power: 31 KW - DTR - machine weight: 9 tons _ WHY IS IT WORTH BUYING MACHINES in PPM? - we have our own service _ stationary and mobile - we have already sold over 700 DMG machines - possibility of starting the machine at the customer's - operator training and delivery of the machine to the customer included in the price - all our machines have undergone a professional technical inspection - ready to work - purchase of the machine is possible through the installment system and leasing.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Hello I have for sale a reputable brand CNC lathe GILDEMEISTER CTX 400 V3 With driven tools and C axis. _ Type: CNC lathe machine Manufacturer: GILDEMEISTER Model: CTX 400 V3 Control: HEIDENHAIN 1190 + TURN PLUS overlay Country of manufacture: Germany Year of manufacture: 1997 _ Machine parameters: - head: 12 - tools for VDI 30 toolholders ( every second socket driven ) - max rpm 5000/min. - max length of turning in Z axis: 640 mm - max diameter of turning in X axis: 290 mm - C axis - driven tools - tool measuring probe - spindle holder BERG KH 200 - max. roller diameter Fi-65 mm- finished part pick-up - cooling system - hydraulic tailstock - chip conveyor - spindle drive power: 21 KW - DTR - machine weight: 5.2 tons _ WHY IS IT WORTH BUYING MACHINES at PPM ? - we have our own service _ stationary and mobile - we have already sold more than 700 DMG machines - possibility to start up the machine at the customer's - operator training and delivery of the machine to the customer included in the price - all our machines are after professional technical inspection - 100% ready to work - purchase of the machine is possible through the installment system and leasing. _ www_ppmsc_en _ Tom_Contact_+48 504 009 641 Cjdpotw U E Ujfx Abgsri Paul_Contact_+48 607 305 841

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, I have for sale a reputable brand CNC lathe GILDEMEISTER CTX 400 V5 With driven tools , 2 x C axis + capture. _ Type: CNC lathe machine Cjdpfxsu Aardj Abgjri Manufacturer: GILDEMEISTER Model: CTX 400 V5 Control: HEIDENHAIN 3190 + TURN PLUS overlay Country of manufacture: Germany Manufacture date: 1999 _ Machine parameters: - head: 12 - tools for VDI 30 toolholders ( all sockets driven ) - max rpm 5000/min. - max length of turning in Z axis: 570 mm - max diameter of turning in X axis: 300 mm - 2 x C axis - driven tools - capture spindle - chuck on main spindle E185 - handle on capture spindle E173 - max. shaft diameter Fi-65 mm - receiver of finished workpiece - tool measuring probe - cooling system - chip conveyor - spindle drive power: 21 KW - DTR - machine weight: 5.7 tons _ WHY IS IT WORTH BUYING MACHINES at PPM ? - we have our own service _ stationary and mobile - we have already sold more than 700 DMG machines - possibility to start up the machine at the customer's - operator training and delivery of the machine to the customer included in the price - all our machines are after professional technical inspection - 100% ready to work - purchase of the machine is possible through the installment system and leasing. _ www_ppmsc_en _

Condition: ready for operation (used), Year of construction: 2000, operating hours: 60,334 h, functionality: fully functional, machine/vehicle number: 01510000031, spindle bore: 70 mm, turning length: 1,350 mm, turning diameter: 500 mm, center width: 1,350 mm, spindle speed (max.): 3,000 rpm, No reserve price - guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates you to collect the machine within the specified period between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Turning length: 1,350 mm Swing diameter: 500 mm Swing diameter over cross slide: 290 mm Swing diameter over bed: 500 mm Chuck diameter: 250 mm Maximum spindle speed: 3,000 rpm Cross slide travel: 260 mm Distance between centers: 1,350 mm Cjdpfx Abjxm Slcsgsri Spindle nose: 8 Spindle bore: 70 mm MACHINE DETAILS Control: HEIDENHAIN Dimensions & Weight Dimensions (L x W x H): 3,000 x 1,800 x 1,700 mm Total weight: 4,000 kg Electrical Data Type of input current: Three-phase Operating voltage: 400 V Frequency: 50 Hz Rated current: 25 A Connection load: 14 kVA Operating hours: 60,334 h

Condition: used, CNC control, numeric control, from GILDEMEISTER GDM 65/2A GILDEMEISTER type Eltropilot EP20 GD-2A year of manufacture 1989 Order: 150 299 Ser. No.: 0.854.183 Mains connection: 220 VAC 50 Hz Rack with 20 module places - 11 Built-in modules Dimension W x H x D 480x 260 x 220 mm Weight approx. 7 kg The control comes from a lathe Gildemeister GDM 42/2A. Crsdpfjh Ecnaox Abgoi Further components from the Gildemeister can be found under stock no: 60343, 60346, 60347

Condition: used, Year of construction: 2005, Technical details: swing diameter: 320 mm control: 840 D SIEMENS turning speeds: 5000 1/min spindle drive: 20 / 27 kW chucking diameter: 250 mm travel -x axis: 650 mm travel -z axis: 300 mm Crodpfx Abomcibwegei turret head: 12 Pos. tool holder: VDI 40 toolpiece turning speed range: 4000 1/min work piece power: max. 11,7 kW weight of the machine ca.: 8 t CNC vertical lathe, live tools, C-axis, high pressure pump 20 bar, 500l, filter, flush gun, 3-jaw chuc, EWAB loading station right, chipconveyor, approx. 23.500h "machine on", approx. 8.000h "spindle on" *

Condition: used, Year of construction: 2007, controller manufacturer: Siemens, controller model: 840 D, _____ Description: Year of manuf. : 2007 Control : Siemens 840 D Turning diam. : 250 mm Turning length : 650 mm In General: Year of construction:2007 Control:Siemens 840 D Bar capacity:65 mm Turning diameter:350 mm Turning length:650 mm Main spindle: Technology:Motor spindle Speed:5,000 rpm Power max.:35 kW Torque max.:370 Nm C-axis:0.001 Bar capacity:65 mm Chuck:Hainbuch Spanntop size 65 Clamping cylinder:Hollow clamping cylinder Sub spindle: Technology:Motor spindle Speed:5,000 rpm Power:26 kW Torque:290 Nm C-axis:0.001 Chuck:Hainbuch Spanntop size 65 Clamping cylinder:Partial hollow clamping cylinder Z-axis:670 mm X-axis:175 mm Tool carrier i (X/Y/Z): Technology:Tool turret, 12 stations Tool holder:VDI 30 Tool drive:4,000 rpm, 11 kW, 28 Nm X-axis:300 Y-axis:80 mm ( +/- 40 mm) Z-axis:650 mm Crsdpfxextr Iwo Abgji Tool carrier II (X/Z): Technology:Tool turret, 12 stations Tool holder:VDI 30 Tool drive:4,000 rpm, 11 kW, 28 Nm X-axis:180 Z-axis:650 mm Equipment: Chip disposal:Chip conveyor Coolant supply:IKZ system Measuring systems:Direct in all X-axes (glass scales) Bar loader:IRCO Breuning Part removal:Finished part gripper + indexing belt Emulsion mist separator:Mechanical Set-up mode:Electronic handwheel

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 2 MAIN SPINDLE - Spindle speeds : 6500 [rpm] - Max. bar diameter : 42 [mm] - Max. turning diameter : 120 [mm] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Spindle speeds : 6500 [rpm] - Max. bar diameter : 42 [mm] - C axis indexing precision : 0.1 [°] POWER SUPPLY - Supply voltage : 230 [V] - Total installed power : 7.5 [kW] WEIGHT & DIMENSIONS - Machine floor space : 5.400 x 1.900 [mm] - Machine height : 2.000 [mm] - Machine weight : 5.000 [kg] MACHINE HOURS - Number of hours under power : 33912 [h] - Number of working hours : 21069 [h] EQUIPMENT - CNC : FANUC 160i - Coolant tank - Chips conveyor Csdpfx Aou E U Ufebgori - Parts catcher - Parts conveying strip

Condition: used, Year of construction: 2001, functionality: fully functional, GILDEMEISTER - NEF 320 Listing Details Stock number: 1039-9316 Machine Type: Cycle-Controlled Lathe Manufacturer: GILDEMEISTER Model: NEF 320 Year of Manufacture: 2001 CNC Control: Manual Plus 3110 Heidenhain Location: D-59302 Oelde, Germany Country of Origin: Germany Availability: Immediate Freight Terms: Ex works location Additional Information: Cycle-controlled lathe GILDEMEISTER - NEF 320 - Operating hours (power on): 21,529h WE OFFER YOU: - Workshop-inspected machines - Free loading onto truck - NO auction fees - Delivery possible (at extra cost) - Unloading and commissioning (at extra cost) Technical Details Turning diameter: max. 320 mm Turning length: max. 740 mm CNC Control: Manual Plus 3110 Heidenhain Swing over bed: 320 mm Swing over cross slide: 150 mm Turning length: 740 mm Cross slide travel: 185 mm Distance between centers: 750 mm Main Spindle: Spindle speed range: 10 - 4,000 rpm Main spindle drive power: 11 kW Max. torque: 410 Nm Spindle nose: No. 6 DIN 55027 Front bearing spindle diameter: 85 mm Spindle bore: 50.8 mm Max. chuck diameter: 200 mm Chuck diameter: 200 mm Tool holder: Type: MultiFix - B Tailstock: Quill diameter: 70 mm Quill taper: MK 5 Quill stroke: 120 mm Feeds: Rapid traverse x/z: 8 / 10 m/min Feed force x/z: 3 / 6 kN Total power requirement: 14 kVA Machine weight approx.: 2.0 t Space requirement approx.: 3.5 x 2.5 x 2.0 m Accessories Documentation Codpfsxtpcfox Abgjri Three-jaw chuck 200 mm Tailstock Tool holder MultiFix B

Condition: good (used), Year of construction: 2007, - SIEMENS 840 D control - Bar capacity 65 mm - Main and sub spindle with speed 5,000 rpm - C-axis, Y-axis - 3 turrets, each with 12 stations (all driven) - Driven tool speed 4,000 rpm Credpfx Abjuw Izvsgji - Tool holder VDI 30 with drive according to DIN 5480 TRAVELS X1= 165, Z1= 220 mm X2= 165, Z2= 150 mm X3= 165, Z3= 650, Y3= 80 (+50/-30) mm ACCESSORIES Coolant system Chip conveyor Bar loader TOP Automazioni XF 375

Condition: used, Hydraulic self-centering steady rest, luenette, lynette SMW AUTOBLOK Hydraulic steady rest with hydrostatic bearings Suitable for GILDEMEISTER / MAX MÜLLER lathe MD 5 Type: SLK 8-70 N Clamping range: 8 to 70 mm Operating pressure: approx. 60 bar steady rest base: 245 x 240 mm Type of construction: stationary - 3 pieces roller bearing Ø 35 mm - roller width 18 mm - hydraulic self centering dimension L x W x H: 350 x 250 x 550 mm Crjdpfxoiv Irlj Abgsi dead weight: 65 kg good condition

Condition: good (used), Year of construction: 2009, Gildemeister GMX 300 linear, year of manufacture 2009, Siemens 840 D Powerline control, centre distance 1930 mm, turning diameter Ø 640 mm, Y axis, 12-position turret – all positions driven, infinitely variable B axis in the milling head, 120-position HSK 63 tool magazine, differential pressure, high-pressure cooling 20 bar, electric doors, 5-axis milling, machine without chuck, machine without accessories. Credoxuqdgopfx Abgei

Condition: ready for operation (used), Year of construction: 2005, operating hours: 52,455 h, functionality: fully functional, machine/vehicle number: 2501-0154, turning length: 600 mm, turning diameter over cross slide: 140 mm, turning diameter: 300 mm, spindle motor power: 25,000 W, spindle speed (min.): 5,000 rpm, spindle speed (max.): 5,000 rpm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 3 m/min, rapid traverse Y-axis: 3 m/min, rapid traverse Z-axis: 3 m/min, rotational speed (max.): 4,000 rpm, rotational speed (min.): 4,000 rpm, torque: 239 Nm, bar passage: 80 mm, feed rate X-axis: 165 m/min, feed rate Y-axis: 165 m/min, feed rate Z-axis: 220 m/min, overall weight: 10,500 kg, Equipment: documentation/manual, Machine is still in use and can be seen working at VOVU Machining in Uden. In total there are 6 identical machines here. Csdpfx Abour Hfzjgjri Fanuc 310is controller

Condition: used, Year of construction: 2007, controller manufacturer: Siemens, controller model: 840D - Powerline, _____ Description: Year of manuf. : 2007 Control : Siemens 840D - Powerline Turning diam. : 640 mm Turning length : 1185 mm Mainspindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):28 kW Torque (max.):320 Nm C-Axis:0,001° Barcapacity:65 m Workpiececlamping:3-Jaw chuck, Hainbuch B-TOP 3 ø215 mm Subspindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):28 kW Torque (max.):320 Nm C-Axis:0,001° Workpiececlamping:3-Jaw chuck, Hainbuch B-TOP 3 ø215 mm Movement in Z:1.150 mm Rapid travers in Z:40 m/min Toolcarrier I (X/Y/Z/B): Technology:Millingspindle Speed:12.000 rpm Power (max.):22 kW Torque (max.):100 Nm Taper:HSK-A63 Movement in X/Y/Z:550/180/1.185 mm Rapid traverse in X/Y/Z:40/24/70 m/min B-Axis:240° Toolcarrier II (X/Z): Technology:Turret with 12 stations Taper:VD40 Tooldrive:4.000 rpm, 11,7 kW, 28 Nm Movement in X/Z:180/1.050 mm Rapid traverse in X/Z:24/40 m/min In general: Technology:Shelfmagazin with Double-gripper Toolstations:80 Toollength (max.):200 mm Tool-ø (max.):80 mm Equipment/Accessory: Positionsensor:Direct Scales in all Axes Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with Paperbeltfilter, Temperature control and high-pressure, 80 bar Workpiecemeasurement:Touchprobe, Marposs WRP 45 Toolbreakagecontrol:Mechanical Rawmaterial feed:Barloader, Breuning-Irtco ILS-RBK 10016 Finishedpart removal:Pick-up device at Turret andParts conveyor belt Csdpfx Aexrw Uyobgeri Oilmistseperator:Electrostatic Extraction, LTA AC 3001 Toolholder:Misc. used static and driven toolholder Further Accessory:Chiller, Rinsing pistol

Condition: ready for operation (used), Year of construction: 2004, Immediately available from Swiss toolmaking: Gildemeister lathe, type NEF 320 K, year of manufacture 2004, control Siemens Sinumerik 810 DL Touch. Swing over bed 320 mm, swing over cross slide 150 mm. Travels X 255 mm, Z 800 mm. Spindle head size 6, spindle bore 52 mm. Y feed rate 4 m/min. Drive 7 kW. Plan travel 185 mm. Distance between centers 750 mm. Tailstock ISO MK 5, diameter 70 mm, quill stroke 120 mm. Chuck with various jaws. Multifix B toolholder with inserts. Weight 2 tons. Price: EUR 6,500—plus VAT ex location. Csdpfoxufcwox Abgjri

Condition: used, turning diameter . mm turning length . mm control 2x 840 D Kühlmittelsystem Cjdpfoqn A Rnex Abgori chip conveyor ja kW generator - rated current 95,00 A connected load 65,00 kW

Condition: used, Spare Parts Donor We are dismantling the CNC lathe GILDEMEISTER Type GDM 42/2A CNC control: Eltropilot EPL 2 Machine No. 4.5733 Year of construction: 1989 Machine not operational - electrical issues Standard turning diameter: 185 mm Maximum swing diameter: 400 mm Cross slide travel (X-axis): 190 mm Codpfx Abodzqm Rogsri Longitudinal slide travel (Z-axis): 450 mm Spindle bore diameter: 52.7 mm Draw tube spindle clearance: Ø 42 mm Feed rate X and Z axes: max. 3000 mm/min Spindle speed: 40-6300 rpm, infinitely variable Spindle drive motor power: 22 kW Electrical connection: 400 Volt, 50 Hz, 45 kVA - Hydraulic 3-jaw power chuck FORKARDT Ø 200 mm - 12-station tool turret, VDI 40, every second station driven - 6 driven tool stations - Chip conveyor with integrated coolant unit - Separate electrical cabinet - 10 tool holders VDI 40 Footprint of complete machine (L x W x H): 5000 x 2500 x 2100 mm Total weight: approx. 5.7 t Good condition Transport dimensions: Footprint of base machine (L x W x H): 3000 x 2300 x 1900 mm Weight of base machine: approx. 4.8 t Footprint of chip conveyor (L x W x H): 4300 x 1200 x 1650 mm Weight of chip conveyor: approx. 500 kg Footprint of control cabinet (L x W x H): 2500 x 550 x 2000 mm Weight of control cabinet: approx. 450 kg Main drive motor missing Individual components available on request