Used Gildemeister Ctx 400 E for sale (240)

Year of construction: 1982, condition: ready for operation (used), A CNC lathe Gildemeister including a chip conveyor and a Forkat chuck is available. 1) Gildemeister NEF CT 60, year of manufacture: approx. 1982, distance between centers: 1000mm, turning length: 1000mm, max. turning diameter: 460mm, center height: 300mm, bed width: 450mm, spindle bore: 107mm, speed: 3015rpm, tool stations: 12, quill diameter: 100mm, quill stroke: 180mm, machine dimensions X/Y/Z: approx. 5400mm/2100mm/2000mm, weight: approx. 7000kg. 2) Chip conveyor Allweiler GB 30L 38L. Without Filter. Documentation available. An on-site inspection is possible. Hnodpfx Agjydp Aze Iol

Year of construction: 1996, condition: ready for operation (used), A cycle-controlled CNC lathe Gildemeister is available. Center distance: 1500mm, max. turning length: 1500mm, swing diameter over bed/cross slide: 500mm/290mm, speed: 2800rpm, spindle bore: 70mm, spindle torque: 1050Nm, travel X/Z: 260mm/1600mm, rapid traverse X/Z: 6m/8m/min, feed rate: 5m/min, feed force: 5kN, tailstock quill stroke: 180mm, tailstock quill diameter: 80mm. Machine dimensions X/Y/Z: approx. 3200mm/1800mm/1900mm, weight: approx. 3100kg, operating hours: 79727h. Documentation available. On-site inspection is possible. Hnjdpfxex Uq Uhs Ag Isl

Condition: ready for operation (used), Year of construction: 2006, operating hours: 32,503 h, functionality: fully functional, machine/vehicle number: 01510006441, controller model: MANUAL PLUS 4110, TECHNICAL DETAILS Control: MANUAL PLUS 4110 MACHINE DETAILS Electrical Supply Rated voltage: 400 V Phases: 3~ Frequency: 50 Hz Performance Data Power: 24 kVA Rated current: 35 A Hnsdpfxox Uz Eds Ag Ijl Fuse rating: 50 A Operating hours: 32,503 h

Condition: used, Year of construction: 1999, control Heidenhain centre distance 1400 mm Hjdpjw Syd Sofx Ag Ionl weight of the machine ca. 3,6 t Handwheel defective

Condition: good (used), Year of construction: 1984, functionality: fully functional, Swing diameter over bed: 560 mm Swing diameter over cross slide: 250 mm Spindle bore: 65.3 mm Max. power: 15 kW Speeds: 11.2 - 2,240 rpm Distance between centers: 1,000 mm Quill diameter: 80 mm Quill taper: MT 5 Hodpsvn Rlzjfx Ag Isnl Including chip conveyor Including complete documentation Immediately available from stock

Condition: good (used), Year of construction: 2000, operating hours: 21,594 h, functionality: fully functional, Gildemeister NEF 320 CNC teach-in lathe Heidenhain Manual Plus Year of manufacture: 2000 Machine operating hours: 21,594 Max. turning diameter over bed: 320 mm Max. turning diameter over cross-slide: 150 mm Max. turning length between centers: 750 mm Max. spindle bore: 50 mm Motor: 9 kW Spindle speed: 10–4,000 rpm Chuck: Rota-S Plus Multifix quick-change toolpost with tool holders Documentation and accessories Hnsdpoyh Hg Njfx Ag Iol Machine is powered up and available for inspection

Condition: used, Tailstock, counter bearing for dividing head, dividing attachment -Tailstock comes: from a Gildemeister lathe -Tip height: 270 mm -Quill: electrically driven -Foot switch Hsdpfx Agjdkru Hs Ijnl -Recording: MK5 -Number: 1x tailstocks available -Price: per piece -Dimensions: 820/250/H400 mm -Weight: 136 kg

Condition: used, Tool holder, milling holder, milling tool -Intake: SK50 5 pieces -Sizes: see pictures -Price: complete -Dimensions box: 400/300/H270 mm Hedpfxjfnbyns Ag Ijnl -Weight: 42.1 kg

Condition: used, Year of construction: 2005, turning diameter 640 mm turning length 1.185 mm control SINUMERIK 840D swing diameter 640 mm distance of spindle heads 1500 mm slide I: X1 / Y1 / Z1 / B slide travel X-axis 550 mm slide travel Z-axis 180 mm Z- Travel 1.185 mm B - axis 240 ° feed x-axis 0 - 40.000 mm/min feed y- axis 1 - 24.000 mm/min Feed z- axis 1 - 70.000 mm/min feed B-axis 1 - 20 1/min rapid traverse X/Y/Z 40 / 24 / 70 m/min feed capacity X/Y/Z S6: 7,00/11,00/7,50 kN tool taper HSK 63 turning speed milling-spindle 10 - 12.000 1/min power capacity at 100 % load 13,20 kW power capacity at 40 % load 22,00 kW torque milling spindle 60 / 100 Nm no. of workpieces in the magazine 46 Stück tool length - max. 350 / 200 mm tool diameter 80 mm wotkpiece diameter with 2 vacant positions 120 mm weight of tools max. 6 / 10 kg slide II: X2 / Z2 slide travel X-axis 180 mm Z- Travel 1.050 mm feed x-axis 1 - 24.000 mm/min Feed z- axis 1 - 36.000 mm/min rapid traverse x + z axis 24 / 36 m/min feeding force S6: 11,00/9,00 kN turret (x-stations) 12 tool taper DIN 69880 Ø40 Driven tools - quantity 12 Driven tool turning speed 1 - 4.000 1/min power capacity at 100 % load 10,70 kW torque S1: 32 Nm Slide III - longitudial travel Z3 mm Z- Travel 1.150 mm Feed z- axis 1 - 36.000 mm/min rapid traverse Z-axis 36,00 m/min feed capacity Z - axes S6: 13,00 Nm Main spindle ISM90 turning speed main-spindle 10 - 4.000 1/min power capacity at 100 % load 36,00 kW power capacity at 40 % load 45,00 kW max. torque at 40% / 100% load 800 / 630 Nm spindle bore 80 mm turning speed opposed-spindle 10 - 5.000 1/min power capacity at 100 % load 21,00 kW power capacity at 40 % load 28,00 KW max. torque at 40% / 100% load 320 / 240 Nm spindle bore 80 mm total power requirement 70,00 kW weight of the machine ca. 20,00 t dimensions of the machine ca. 8,50 x 4,50 x H3,10 m Machine with SIEMENS SINUMERIK 840D control, main- and counter-spindle, chip conveyor, dust exhauster, DMG-automation WH10top. Main-spindle ISM90: hollow clamping device, C-axis, 3-jaw hydraulic chuck SMW-AUTOBLOK KNCS-NB-315-91 Counter-spindle ISM76: closed center clamping device, C-axis, 3-jaw hydraulic chuck SMW-AUTOBLOK KNCS-NB-315-91 Pick-up device with integrated conveyor belt, automatic protective cover, differential pressure clamps. Incl. pump-frame for coolant - Pump 1: 17 l/min at 80bar - Pump 2: 20 l/min at 8bar - Pump 3: 40 l/min at 20bar Hnsdpfx Ajydflleg Iel Without coolant unit. Was connected to a central coolant-system. Accessories: Hainbuch collet chuck incl. collets Ø30,45,50,55,60,65,72,82,85,90 1 piece workpiece pick-up-gripper for turret

Condition: good (used), Year of construction: 1989, operating hours: 64,136 h, Centre height: 350 mm Turning length: 1000 mm Max. swing diameter over bed cover: 600 mm Max. swing diameter over cross slide: 360 mm Spindle bore: 107 mm Speed range: 16 – 3150 rpm Feed range longitudinal & face: 0.5 – 5000 mm/min Rapid traverse longitudinal & face: 9 m/min Main drive: 30 kW Dimensions of machine with chip conveyor (L x W x H): 5400 x 2200 x 2000 mm Weight: 6400 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 with TFT display General description: CNC manual input control system with program entry via function and numeric keypad. All information is entered in dialogue with the screen. Integrated menu technology with plain text display of all functions. Operator keypad, display, and electronic handwheel located within a separate chip guard housing. The EPL control offers the following capabilities: • Direct interactive program entry and editing by the operator through the EPL control without manual technological preparation • NC programs in ISO/EIA format can be entered, output, or manually keyed in via the RS 232 serial interface Machining cycles: • Removal cycles for longitudinal, facing, and contour turning, including with allowance • Thread cutting • Undercuts as per DIN 509-Form E and F and DIN 76; grind stock programmable • Axial and radial grooves as per DIN 471 and 472, including bottom finishing • 90° radii and 45° chamfers • Automatic cutter radius compensation for cycles, undercut, groove, radius, chamfer Programming: • Block-orientated, metric/inch, diameter for absolute entry, radius for incremental entry • Full circle programming, subroutine technology, hide levels for program sections, zero point offset, mode selection via menu Program entry and output: • Interactive via guided menu or direct in dialogue • Hydraulic 3-jaw chuck Ø 315 mm with through spindle bore Ø 80 mm • Hinged chip conveyor • 12-position tool turret VDI 40, 6 standard stations + 6 driven tool stations • Coolant system • RS 232 interface • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • 12 various standard toolholders (to be finalized on site) Overhauled servo drive for main spindle, 06/2025 Hnjdpfxevr Eh Ee Ag Iel Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: ready for operation (used), Gildemeister 851.75.00-03.26 card (570 127/137), used, normal signs of use, 100% functional Hjdpfei D U S Rjx Ag Ienl

Condition: ready for operation (used), Gildemeister 852.14.00-01.34 bus adapter, serial number as per photo, used, normal signs of use, 100% functional Hnjdpfxoi D U Tce Ag Iol

Condition: ready for operation (used), Gildemeister VK030 SI188 card SN6235027,used, normal signs of wear, 100% functional, scope of delivery as per photos Hnodpfxstztfaj Ag Iel

Condition: ready for operation (used), Gildemeister VD030K AES2 card + Gildemeister 0.88.630-0 SI0ADP additional board, used, normal signs of use, 100% functional, scope of delivery as per photos Hnodpetztftefx Ag Iel

Condition: ready for operation (used), Gildemeister VAP4 / VAP 4 AES 1 / 0.881.051-2 card SN 5899090, used, normal signs of use, 100% functional, scope of delivery as per photos Hnsdpotztfgjfx Ag Iel

Condition: ready for operation (used), Dataram DR-717 32K x 17 card (Gildemeister) , serial no. according to photo ,used, normal signs of wear, 100% functional Hedpfei D Un Rjx Ag Isnl

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, turning length: 1,185 mm, turning diameter: 640 mm, spindle speed (max.): 4,000 rpm, turning diameter over bed slide: 640 mm, counter spindle torque (max.): 5,000 Nm, Turning and Milling Center with Main and Counter Spindle and Comprehensive Equipment! TECHNICAL DETAILS Turning diameter: 640 mm Turning length: 1,185 mm Swing diameter: 640 mm Distance between headstocks: 1,500 mm SLIDE I X-Axis travel: 550 mm Y-Axis travel: 180 mm Z-Axis travel: 1,185 mm B-Axis: 240° Feed rate X-axis: 0 – 40,000 mm/min Feed rate Y-axis: 1 – 24,000 mm/min Feed rate Z-axis: 1 – 70,000 mm/min Feed rate B-axis: 1 – 20 rpm Rapid traverse X/Y/Z: 40 / 24 / 70 m/min Feed force X/Y/Z S6: 7.00 / 11.00 / 7.50 kN Tool interface: HSK 63 Milling spindle speed: 10 – 12,000 rpm Drive power 100% duty cycle: 13.20 kW Drive power 40% duty cycle: 22.00 kW Milling spindle torque: 60 / 100 Nm Max. tool length: 350 / 200 mm Tool diameter: 80 mm Tool diameter with 2 free pockets: 120 mm Max. tool weight: 6 / 10 kg SLIDE II X-Axis travel: 180 mm Z-Axis travel: 1,050 mm Feed rate X-axis: 1 – 24,000 mm/min Feed rate Z-axis: 1 – 36,000 mm/min Rapid traverse X + Z axes: 24 / 36 m/min Feed force Z / X S6: 11.00 / 9.00 kN Turret (positions): 12 Tool holder: DIN 69880 Ø40 Driven tool positions: 12 Speed: 1 – 4,000 rpm Drive power 100% duty cycle: 10.70 kW Torque S1: 32 Nm SLIDE III Z-Axis travel: 1,150 mm Feed rate Z-axis: 1 – 36,000 mm/min Rapid traverse Z-axis: 36 m/min Feed force Z-axis S6: 13.00 Nm MAIN SPINDLE Model: ISM90 Speed: 10 – 4,000 rpm Drive power 100% duty cycle: 36.00 kW Drive power 40% duty cycle: 45.00 kW Torque at 40% / 100% duty cycle: 800 / 630 Nm Spindle bore: 80 mm COUNTER SPINDLE Speed: 10 – 5,000 rpm Drive power 100% duty cycle: 21.00 kW Drive power 40% duty cycle: 28.00 kW Torque at 40% / 100% duty cycle: 320 / 240 Nm Spindle bore: 80 mm MACHINE DETAILS Electrical Data Total power requirement: 70.00 kW Dimensions & Weight Machine weight: approx. 20.00 t Footprint: approx. 8.50 x 4.50 x H3.10 m Control Control manufacturer: Siemens Control model: SINUMERIK 840D EQUIPMENT Chip conveyor Oil mist separator DMG Automation WH10top Main spindle ISM90: Hollow chuck, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Counter spindle ISM76: Partial hollow chuck, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Hodpfx Aowyvc Usg Ienl Pick-off unit with integrated conveyor belt Automatic safety cover Differential pressure clamping With pump stand for coolant: Pump 1: 17 l/min at 80 bar / Pump 2: 20 l/min at 8 bar / Pump 3: 40 l/min at 20 bar Hainbuch collet chuck including collets Ø30, 45, 50, 55, 60, 65, 72, 82, 85, 90 1 workpiece pick-off for turret

Condition: good (used), Year of construction: 2004, spindle speed (min.): 3,500 rpm, travel distance Z-axis: 1,000 mm, Model Year: 2004 Chuck Diameter: 12" Number of Axes: 3 Length: 1000 mm Swing Over Bed: 350 mm Hnjdjx Nvr Uopfx Ag Isl Spindle Speed (RPM): 3500 Machinable Materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, Peek

Condition: used, CNC control, numeric control, from GILDEMEISTER GDM 65/2A GILDEMEISTER type Eltropilot EP20 GD-2A year of manufacture 1989 Order: 150 299 Ser. No.: 0.854.183 Mains connection: 220 VAC 50 Hz Rack with 20 module places - 11 Built-in modules Dimension W x H x D 480x 260 x 220 mm Weight approx. 7 kg Hnedpfsh Ecnaox Ag Iel The control comes from a lathe Gildemeister GDM 42/2A. Further components from the Gildemeister can be found under stock no: 60343, 60346, 60347

Condition: used, Year of construction: 2013, turning diameter max. 20 mm turning length max. 80 mm control Fanuc 310is Main spindle: max. usable bar diameter 20 (25) mm inner draw tube diameter 28,5 mm Max. speed main spindle 10.000 min/-1 power capacity - main spindel 3,7 kW max. Torque 9,4 Nm C-Axis C1: 360 ° Subspindle: inner draw tube diameter 28,5 mm Max. speed main spindle 10.000 min/-1 power capacity - main spindel 3,7 kW max. Torque 9,4 Nm C-Axis C2: 360 ° axis stroke: x-axis 1: 50 / 2: 240 mm y-axis 1: 350 / 2: 120 mm z-axis 1: 80 / 2: 300 mm Linear tool panel carrier for slide 1: number of toolpositions 17 pos. inner processing 6 pos. outer processing 6 pos. driven statition 5 pos. Shank diameter 20 mm shaft cross cut 12 x 12 mm collet diameter ESX / ER 16 tool spindle speed range 3x 3.450 / 2x 6.000 min/-1 power capacity - driven tool-stations 5x 0.98 kW max. Torque 3x 4 / 2x 2,3 Nm Linear tool panel carrier for slide 2: number of toolpositions 13 pos. inner processing 4 Hodpstqmnnofx Ag Ionl outer processing 4 driven statition 5 pos Shank diameter 20 mm shaft cross cut 12 x 12 collet diameter ESX / ER 16 tool spindle speed range 3x 3.450 / 2x 6.000 min/-1 power capacity - driven tool-stations 5x 0,98 kW max. Torque 3x 4 / 2x 2,3 Nm feeds: rapid traverse ( X / Y / Z ) max. 40 m/min feed power max. 2,5 kN Accelaration max. 5 m/s² total power requirement 56 kVA weight of the machine ca. 4,8 t dimensions of the machine ca. 8,0 x 2,5 x 2,0 m CNC-Short-Lathe GILDEMEISTER - Sprint 20-8 - 8 Achsen ( 2x X / 2x Y / 2x Z / 2x C ) - Main- and Subspindle - Bar-Feeding-Magazine FMB turbo 3-36/ 3200A - Coolant System DELTATHERM

Condition: ready for operation (used), Year of construction: 2000, operating hours: 60,334 h, functionality: fully functional, machine/vehicle number: 01510000031, spindle bore: 70 mm, turning length: 1,350 mm, turning diameter: 500 mm, center width: 1,350 mm, spindle speed (max.): 3,000 rpm, No reserve price - guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates you to collect the machine within the specified period between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Turning length: 1,350 mm Swing diameter: 500 mm Swing diameter over cross slide: 290 mm Swing diameter over bed: 500 mm Chuck diameter: 250 mm Maximum spindle speed: 3,000 rpm Cross slide travel: 260 mm Distance between centers: 1,350 mm Spindle nose: 8 Spindle bore: 70 mm MACHINE DETAILS Control: HEIDENHAIN Dimensions & Weight Hnsdpfxsxm Slcj Ag Iel Dimensions (L x W x H): 3,000 x 1,800 x 1,700 mm Total weight: 4,000 kg Electrical Data Type of input current: Three-phase Operating voltage: 400 V Frequency: 50 Hz Rated current: 25 A Connection load: 14 kVA Operating hours: 60,334 h

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Hello I have for sale a renowned brand CNC LATHE DMG GILDEMEISTER CTX 500 V3 with C axis and driven tools. The machine is in very good technical and visual condition. _ Type: CNC Lathe Manufacturer: DMG GILDEMEISTER Model: CTX 500 V3 Control: HEIDENHAIN 3190 + TURN PLUS overlay for generating programs Country of manufacture: Germany Year of manufacture 1998 _ Machine parameters: - head: 12 - tools for VDI 40 holders (every second socket driven) - max. rpm 3500/min. - C axis - driven tools - max. turning length in the Z axis: 1150 mm - max. turning diameter in the X axis: 500 mm - BERG spindle holder Fi-315 mm - max. shaft diameter Fi-91 mm - cooling system - hydraulic tailstock - controlled from the program - chip conveyor - spindle drive power: 31 KW - DTR - machine weight: 9 tons _ WHY IS IT WORTH BUYING MACHINES in PPM? - we have our own service _ stationary and mobile - we have already sold over 700 DMG machines Hjdpfx Agsu Aauxs Ienl - possibility of starting the machine at the customer's - operator training and delivery of the machine to the customer included in the price - all our machines have undergone a professional technical inspection - ready to work - purchase of the machine is possible through the installment system and leasing.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 57,588 h, functionality: fully functional, machine/vehicle number: 07500000781, spindle speed (max.): 12,000 rpm, spindle bore: 79 mm, swing diameter over bed slide: 640 mm, spindle diameter: 120 mm, center height: 1,343 mm, distance between centers: 1,930 mm, TECHNICAL DETAILS Center height: 1,343 mm Center distance: 1,930 mm Max. swing diameter: 640 mm Hsdpfx Asww Hafjg Ienl Work Spindle Spindle head according to DIN: flat flange Size: 170 h5 Spindle diameter at front bearing: 120 mm Spindle bore: 79 mm Max. chuck diameter: 200 / 250 / 315 mm Max. torque at 100/40% duty cycle: 270 / 390 Nm Infinitely variable speed range: 20 to 4,000 / 12,000 rpm Slide Tool system: disc turret / tool spindle Number of saddle slides: 3 Number of cross slides: 2 Longitudinal travel: z₁ = 1,585 mm / z₂ = 1,400 mm / z₃ = 1,500 mm Cross travel: x₁ = 550 mm / x₂ = 180 mm Tailstock Quill taper: MK5 Max. tailstock offset, manual / automatic: 1,500 mm Feed Rate Rapid traverse, longitudinal: Z₁ = 65 / Z₂ = 40 / Z₃ = 40 m/min Rapid traverse, cross: X₁ = 40 / X₂ = 24 m/min Feed force, longitudinal: Z₁ = 7.5 kN / Z₂ = 11 kN / Z₃ = 11 kN Feed force, cross: X₁ = 7.5 kN / X₂ = 9 kN MACHINE DETAILS Year of manufacture: 2005 Length: 8.9 m Width: 4.5 m Height: 3.1 m Weight: 24,000 kg Power-on hours: 102,104 h Spindle hours: 57,588 h

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 2 MAIN SPINDLE - Spindle speeds : 6500 [rpm] - Max. bar diameter : 42 [mm] - Max. turning diameter : 120 [mm] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Spindle speeds : 6500 [rpm] - Max. bar diameter : 42 [mm] - C axis indexing precision : 0.1 [°] POWER SUPPLY - Supply voltage : 230 [V] - Total installed power : 7.5 [kW] WEIGHT & DIMENSIONS Hnodpju E U Ufjfx Ag Iel - Machine floor space : 5.400 x 1.900 [mm] - Machine height : 2.000 [mm] - Machine weight : 5.000 [kg] MACHINE HOURS - Number of hours under power : 33912 [h] - Number of working hours : 21069 [h] EQUIPMENT - CNC : FANUC 160i - Coolant tank - Chips conveyor - Parts catcher - Parts conveying strip

Condition: good (used), Year of construction: 2002, Gildemeister NEF 520 K Gildemeister NEF 520 K Cycle-Controlled Lathe with Siemens Sinumerik 810 DL Control, year of manufacture 2012, in excellent original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. Technical Details Swing diameter over bed: 500 mm Swing diameter over cross slide: 290 mm Turning length: 1,250 mm Control: Siemens Simatic Cross slide travel: 260 mm Distance between centers: 1,500 mm Main Spindle: Speed range – main spindle: 8 - 3,000 rpm Drive power – main spindle: 12 kW Max. torque: 920 Nm Gear stages: 2 Spindle nose: No. 8 DIN55027 Spindle diameter in front bearing: 120 mm Max. bar capacity: 62 mm Spindle mount: ME80 Chuck diameter: 250 mm Tool Turret: Tool system: MultiFIX - C Tailstock: Quill diameter: 80 mm Quill taper: MT 5 Quill stroke: 180 mm Feed Rates: Rapid traverse x/z: 4 / 6 m/min Feed force x/z: 5 / 10 kN Total power requirement: 28 kVA Machine weight approx.: 3.0 t Space requirements approx.: 3.5 x 2.5 x 2.0 m Accessories and Equipment: Hnjdpfxjw Iqd Io Ag Isl 1 coolant system About the machine: We are offering a Gildemeister NEF 520 K cycle-controlled lathe, year of manufacture 2012, in very good condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. Even at high speeds, the Gildemeister operates very quietly. This latest generation of lathes is extremely user-friendly and can produce surface finishes comparable to grinding. Take the opportunity to inspect the machine under power at our premises and see its condition for yourself.