Used Gear Cutting Machine for sale (71,517)

Condition: good (used), functionality: fully functional, Year of construction: 2011, Trumpf TruLaser 5030 L16 in good condition for sale. Optional available with Liftmaster. Hsdpfx Ajzlttlof Sou The machine is being sold due to a plant upgrade. Working area: 3,000 x 1,500 mm Laser source: CO₂ laser Laser power: 5 kW Year of manufacture: 2011 Control system: Siemens Sinumerik Max. sheet metal size: 3,000 x 1,500 mm Processable materials: Steel Stainless steel Aluminum Immediately available Inspection possible at any time by appointment.

Condition: like new (used), Year of construction: 2013, operating hours: 600 h, Used Lectra Vector VT-FA-Q80-86 automatic cutting machine with only 600 operating hours (practically new), cutting width: 210 cm, maximum cutting thickness: 8 cm. Hsdpoz D Niwjfx Af Sju

Condition: good (used), functionality: fully functional, Year of construction: 2008, TRUMPF TruMatic 7000 – 1300 Hodpsz Dumzofx Af Sou Year of manufacture: 2007 Includes active dies! Includes Sheetmaster and Gripmaster Machine operating hours: 38,797 h Beam on-time: 38,149 h Laser power: approx. 4000 Watts Max. punching force: 220 kN Working area (laser operation): approx. 2540 x 1280 mm Working area: punching area: approx. 2540 x 1370 mm Control system: Bosch MTX compact Max. sheet thickness: approx. 8 mm Space requirement: approx. 7950 x 6700 mm Machine weight: approx. 23,000 kg Total connected load: 87 kVA

Condition: repair required (used), Year of construction: 2008, functionality: not functional, machine/vehicle number: 06-13633, Technical characteristics: Work Area - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse movement of the column: ±20 mm - Maximum workpiece external diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece Specifications - Maximum nominal module (for steel with an approximate tensile strength of 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm, where d0s is the external diameter of the cutter (in mm) - Maximum external diameter (internal gearing): 280 mm - Maximum band (toothed area) width: 42 mm - Maximum stroke length for toothing: 50 mm - Maximum spindle travel: 70 mm Load Capacity - Maximum load supported by the table (including fixtures): 150 kg - Maximum force exerted by the tailstock: 1,500 kg - Maximum attainable helix angle (with hydrostatic guide): ~45° Cutter Spindle - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment - Operating voltage: 400 - 480 V - Control voltage: 24 V - Magnetic voltage: 24 V - Cable cross-section: 16 mm² - Connected power: 15 kW - Protection: 50 A Dimensions - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical Design: Optimized for chip evacuation and easy loading/unloading - Control: Siemens Sinumerik 810D/840D Hsdoxwl Tzjpfx Af Ssu - High Precision: Positioning accuracy via Heidenhain linear scales - Measurement system: Marposs T25 (for angle alignment or zero-point rotation definition) - Oil filtration and cooling system - Magnetic chip conveyor Machine Status: NOT WORKING: NC does not start

Condition: good (used), Year of construction: 2007, functionality: fully functional, Cutting and processing center (ZBZ) from Rotox, manufactured in 2007. The line is designed in a "Z" shape. An reinforcing bridge is located between the cutting center and the processing center. Available for immediate delivery. Hodpfjz Huuqex Af Seu

Condition: good (used), Year of construction: 1976, max. wheel diameter 1250 mm gear width 1000 mm max. module 16 shifting 250 mm milling spindle speeds (infinitely variable) 32 - 200 U/min min. number of teeth 12 table hole 255 mm Hodpfxjzr Rpkj Af Sju total power requirement 32 kW weight of the machine ca. 20 t dimensions of the machine ca. 5,1 x 3,2 x 3,7 m Top condition! 2 cut cycle, change gears, arbors, chip conveyor. Following hob arbors are with the machine: Diameter: 32 , 40 , 50 , 60 mm

Year of construction: 2011, operating hours: 8,350 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: WJ2010-1Z-SJ-S Smart Jet Strong, PTV Waterjet WJ2010-1Z-SJ-S Smart Jet Strong for sale For sale: PTV WJ2010-1Z-SJ-S Smart Jet Strong waterjet cutting machine. Professional CNC waterjet from PTV for the precise cutting of various materials. Thanks to waterjet cutting, materials can be processed without heat input, eliminating material deformation. This machine was used in our production process and is being offered for sale due to the termination of our business operations. Machine specifications: Hsdpfoz A Aa Hex Af Seu Brand: PTV Type: WJ2010-1Z-SJ-S Model: Smart Jet Strong CNC-controlled waterjet cutting machine Working area: cutting bed 2400x1000mm Year of construction: 2011 Operating hours: 8350 High-pressure pump: 4000 bar Includes: software / abrasive system / pump / water treatment / etc. The waterjet is suitable for cutting various materials and material thicknesses, making it a versatile machine for industrial production and custom work. The machine is currently still installed and can be inspected in working order by appointment. If you are seriously interested, please do not hesitate to contact us. Additional photos, videos, and technical data are available upon request.

Condition: used, Dimensions (LxW): 580 x 495 cm Selling price: CHF 1.000 (excl. BTW) Hjdpfx Asz D Tvbjf Ssu New price indicational approx. 120.000 CHF With A-axis Saw blade tiltable: yes Laser guide: yes Worktable rotation: 360 degrees Worktable tiltable: yes Worktable dimensions lxw: 3700 x 2100 mm Connection: 400V Approx. bridge length: 5800 mm Approx. bridge width: 4950 mm Total approx. dimensions lxwxh: 5800 x 5300 x 3000 mm Online auction of best brands and modern stone sawing, cutting and processing machines (e.g. 2022 DONATONI, 2021 CNC INTERMAC PRIMUS, MASTER, MARMO MECCANICCA etc.), large stock of natural stone plates incl. marble, granite etc. and rolling stock (e.g. VOLVO XC60, MERCEDES VITO, FIAT etc.) originating from the bankruptcy of natural stones, marble, granite etc. processing firm Schär + Trojahn AG in Niederwangen near Bern in Switzerland. The online auction opens Tuesday 22 September and closes Thursday 15 October. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 13 October Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: good (used), TMZ F-102 76x106cm die cutting machine The machine is fully operational, ready to work. Made in Spain. Format 760x1060mm Weight 3600kg Power supply 380V Installed power 4.5 kW Hodszyz D Ijpfx Af Ssu Equipment: – pneumatic clutch – control panel – mounting frame – 3 operating modes: continuous, with time delay, manual – central lubrication – safety guards – operating tools – sheet metal for pressure

Condition: good (used), Year of construction: 1998, Max. Pitch circle diameter External gearing 300 mm Max. Pitch circle diameter internal gearing 300 mm Max. Outer diameter of workpiece (equipment) 450 mm max. module 6 gear hobbing width -max. 100 mm Max. Helix angle (with tool Ø 125 mm) +/- 45 ° strokes - infinitely variable 130 - 1300 Hub/min workpiece weight 1000 kg Minimum distance table top - tool spindle -55 / +300 mm Maximum distance table top - tool spindle 200 mm Maximum distance table top - tool spindle 350 mm Manual Upright side shift +/- 25 mm Manual swivelling angle of the tool spindle +/- 0,5 ° Max. Tool speed 15 UpM Max. Workpiece speed 27 UpM Max. Tool diameter 7 Zoll voltage 400 V frequency 50 Hz Max. Line power 70 A total power requirement 48 kW weight of the machine ca. 11 t dimensions of the machine ca. 4,27 x 3,11 x 2,87 m table hole 40 mm control Siemens Sinumerik 840 C taper in main spindle SK 45 Gleason PFAUTER gear shaping machine Mod. PSA 300 The CNC modular gear shaping machine with skiving cutter for the machining of external and internal cylindrical gears, with straight or helical involute with straight or helical involute toothing, as well as any other profile splitting process. The work cycle is controlled by a CNC unit, with specific software for machining the gears, machining. Hsdpfsvu E Nujx Af Sju Field of application --> The PSA 300 has been designed for the production of: - Gears with straight external teeth - Gears with straight internal teeth - Gears with external helical teeth - Gears with internal helical teeth

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 110502, input voltage: 230 V, metric thread diameter (max.): 63 mm, metric thread diameter (min.): 16 mm, Albert Roller Threading Machine 380011 Identical to REMS Magnum Compact, high-performance machine for threading, cutting, deburring, nipple cutting, and rolling grooves. For installation work, metalworking, and industrial applications. Pipe threads from 1/2" to 4" Metric threads from 16 mm to 63 mm Includes 1x universal automatic cutting head 1/16" - 2" and 1x universal automatic cutting head 1/2" - 4" each with 6 cutting dies The cutting dies (1/2" - 4") are used but in very good condition. The cutting dies (1/16" - 2") have been renewed during inspection. Includes 2 x 5-liter cans of Roller's Rubinol 2000 cutting oil. Hedoz Ah R Hjpfx Af Sju The machine can be inspected and tested at our location in 09120 Chemnitz.

Condition: used, Year of construction: 2004, Technical details: max. wheel diameter: 130 mm gear width: 25 mm module max. : 3 module min. : 0,5 control: Siemens 840D work-spindle diameter: 85 mm strokes - infinitely variable: 500 - 2500 Hub/min stroke: 30 mm total power requirement: 48 kVA weight of the machine ca.: 11,5 t space requirements approx. LxWxH: 4,7 x 3,0 x 3,3 m Hsdpfx Aevi Ninsf Sju Equipment: -Counterholder with tip -chip conveyor -hydraulically operated counterholder arm and linear guides i.D. *

Condition: good (used), Year of construction: 1976, max. wheel diameter 2300 mm gear width 1000 mm max. module 22 min. module 1 total power requirement 45 kW weight of the machine ca. 22 t Hsdpfx Aszr Rpdef Ssu dimensions of the machine ca. 5x3x4 m

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, laser type: fiber laser, laser power: 3,000 W, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Type: Two chucks Groove function: Standard Hedpjwwz Dlefx Af Ssu Power range: 3KW, 6KW Round tube processing range: 10mm~160mm Square tube processing range: 10mm~160mm Chuck maximum speed: 130r/min Machine weight: 3T Power specification: 380VAC, 50Hz Optional loading rack: G16pro-automatic loading, G16pro-semi-automatic loading Optional unloading rack: servo unloading rack, cylinder unloading rack Standard: System 3000DE-DH, including nesting, supports servo, dustproof (Y axis), dustproof (X axis), dustproof (Z axis), rear card hollow dust removal, short tail material Optional: safety fence (light curtain), radiation-proof glass

Condition: good (used), functionality: fully functional, Year of construction: 2019, LiftMaster 1530 loading and unloading system for sale due to lack of use. It was previously used with an L20 CO2 laser. Hedezdiwmspfx Af Sou

Condition: used, functionality: fully functional, Workpiece diameter: 1 – 18 mm Cutting discs up to: 100 x 1 mm Hjdpfjz Hbchox Af Sju Bore: 20 mm

Condition: new, Year of construction: 2019, functionality: fully functional, machine/vehicle number: PR4-3000-05190216, sheet thickness (max.): 25 mm, sheet thickness aluminum (max.): 20 mm, input voltage: 400 V, cutting current: 105 A, input current: 28 A, input frequency: 60 Hz, electrical fuse: 50 A, open-circuit voltage: 292 V, Swift-Cut Pro 3000 CNC Plasma Cutting System Complete new and unused CNC plasma cutting system from Swift-Cut Automation, manufactured in 2019. The machine has never been used and is equipped with a Hypertherm Powermax105 plasma power source and an ECO 4 HC/S dust extraction unit with a spark trap. Hsdpfozvch Tex Af Sju The dust extraction system is suitable for plasma cutting applications, including aluminum cutting. Main specifications: Manufacturer: Swift-Cut Automation Model: Pro 3000 Year of manufacture: 2019 Condition: New, never used Serial number: PR4-3000-05190216 Cutting area: 3000 × 1500 mm Plasma power source: Hypertherm Powermax105 Plasma cutting current: 30–105 A Power source: 380/400 V, 3-phase, 50–60 Hz Power source P/N: 059412 Dust collector: ECO 4 HC/S Dust collector motor: 5.5 kW Dust collector power supply: 400 V / 50 Hz Dust collector application: Plasma cutting up to 120 A Additional equipment: Spark trap / spark separator The Hypertherm Powermax105 provides high-performance plasma cutting for a wide range of conductive materials. The actual cutting capacity depends on the material type, thickness, and cutting conditions. The ECO 4 HC/S dust extraction unit is designed for plasma cutting applications and is equipped with an additional spark trap. Its configuration also allows aluminum to be cut safely with suitable operating conditions. Please note: The system is offered without a compressor. A suitable source of clean, dry, and oil-free compressed air is required for the operation of the Hypertherm Powermax105.

Condition: new, Year of construction: 2026, NEW Plasma Cutting Machine. Dimensions: 3,000 mm x 1,500 mm Max. cutting thickness for steel: 22 mm Max. cutting thickness for stainless steel: 12 mm Hedsz Epctepfx Af Sou Complete with CAD/CAM software. Data transfer in DWG and DXF formats via USB and network card. CE marking. ISO 9001, GB/T 19001. 120 A generator. The production cost is incredibly low, requiring only 5.5 kW and compressed air!

Condition: new, Year of construction: 2026, Working width: 400 mm Working height: 220 mm Minimum workpiece length: 250 mm Units: 2 1. Saw cutting unit, Random System: Saw cutting head Hsdpfjgrladsx Af Sju 2. Brush: Tynex brush, grit size 80, diameter 220 mm Height adjustment: Handwheel Height indicator: Mechanical counter Feed rate: 4 - 12 m/min Motor power, saw cutting unit: 1.1 kW Motor power, brush: 3 kW Motor power, feed: 0.37 kW Machine length: 1400 mm Machine width: 1400 mm Weight: 550 kg

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Hedpfx Ajrtrzdef Ssu Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 13,979 h, machine/vehicle number: A3231E0532, controller manufacturer: Siemens, controller model: Sinumerik 840D SL, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruDisk 24001, laser hours: 4,541 h, laser power: 24,000 W, laser wavelength: 1,030 nm, sheet thickness steel (max.): 60 mm, sheet thickness stainless steel (max.): 60 mm, sheet thickness aluminum (max.): 40 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 16 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, workpiece weight (max.): 1,800 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, TRUMPF TruLaser 5030 fiber (L76), 24 kW (2023) High-spec 2D fiber laser cutting machine, one owner from new. 3000 x 1500 mm working area. Siemens Sinumerik 840D SL control with 21.5" multi-touch display. In daily production and under TRUMPF maintenance contract from new. Key data Machine No.: A3231E0532 Year of manufacture: 09/2023 Laser source: TruDisk 24001 (external, separate energy supply) Laser power: 24,000 W Working area: 3000 x 1500 mm Max. sheet thickness (thick-sheet package fitted): mild steel 60 mm / stainless 60 mm / aluminium 40 mm / copper 16 mm / brass 12.7 mm Max. simultaneous speed: 280 m/min Machine weight: 7,650 kg Supply: 400 V 3~ / 50 Hz, 22.0 kVA, 3 x 63 A Hours: 13,979 h operating / 4,541 h laser-on Machine Box frame. Gantry drive with linear direct drives. Longitudinal conveyor belt. Transverse conveyor belt with tipping container (right). Process cooler for machine and laser (water/air). Work area illumination. Pilot laser. Spraying equipment. Automatic nozzle cleaning. Closed beam guidance via laser light cable (LLK). Machine status light. Integrated electrical cabinets. Mild steel slats, 67 mm spacing. Slag cart under pallet changer. Cleaning brush. Cutting unit Single cutting-head strategy. Protective glass with online condition checking. Dynamic Focus Control. Automatic nozzle centring. Universal cutting unit with fully adaptive lens system. Hodpfx Aszz Sd Usf Seu Control and software SINUMERIK 840D SL. Integrated technology data. Production plan. Multi-sheet processing. Condition Guide. Cutting Guide. Quick post-production. Auto-shutdown. Programmable cutting gas / pressure selection. Microweld. Nanojoints. Oseon Go. Online Update Manager. Remote support interface. Functions and cutting packages AdjustLine, BrightLine fiber, ControlLine, DetectLine, Drop&Cut, FastLine, FlyLine, FocusLine, NitroLine, PierceLine, PlasmaLine, Smart nozzle automation. Integrated camera for process viewing. Fusion cut performance package, Highspeed cutting package, Highspeed Eco cutting package, cutting package for thick sheets, copper cutting package, brass cutting package, gas mix cutting package (N2/O2). Gas Witt gas mixer unit with hardware gas mixer for two gases, plus additional cutting gas connection. Pallet changer / automation Automatic heavy-duty pallet changer in longitudinal direction. LiftMaster Compact interface prepared; loading automation not fitted. Safety and extraction CE marking, EC Machinery Directive. Light barriers. Enclosed protective housing with certified door viewing panels left and right. Electrical rolling roof. Multi-chamber compact dust extractor. Data transfer USB interface. RJ45 network interface. Central Link. Remote support. Installation Currently installed on a mezzanine. Mezzanine steel structure not included in the sale. Condition and availability One owner from new, used in daily sheet metal subcontract production in Braintree, Essex. Under TRUMPF maintenance contract from new (two services per year) and still covered - full service history available. Can be viewed cutting under load on any working day by appointment; cut tests welcome. Offered ex works, decommissioned by TRUMPF-certified engineers and loaded onto your transport. Export packing available on request. Enquiries Full TRUMPF order confirmation, service history, hours report, cut samples and video of the machine running available on request.

Condition: good (used), functionality: fully functional, Year of construction: 2019, travel distance X-axis: 3,048 mm, travel distance Y-axis: 1,524 mm, travel distance Z-axis: 350 mm, total length: 9,450 mm, total width: 2,240 mm, total height: 2,520 mm, For sale is a used Bodor P3 fiber laser cutting machine, manufactured in 2019. The machine is in good used condition and is ideal for professional use in metal and sheet metal processing. Hjdpfx Afoz Egzgj Sju Bodor P3 fiber laser cutting machine – manufactured in 2019 – used Bodor P3 3D? / fiber laser cutting system – manufactured in 2019 Technical data: * Model: Bodor P3 * Year of manufacture: 2019 * Working area: 3,048 × 1,524 mm * Max. travel speed: 200 m/min * Max. acceleration: 4.0 G * Z-axis travel: 350 mm * Positioning accuracy: ±0.05 mm/m * Accuracy of repositioning: ±0.02 mm * Dimensions: approx. 9,450 × 2,240 × 2,520 mm * Table loading station: 3–60 kW, depending on the model The Bodor P3 impresses with its high cutting speed, precise positioning and a generous working area. An interesting machine for sheet metal processing, metalworking, job production and industrial manufacturing. Used machine – inspection possible by appointment. Transport, dismantling and loading can be organized upon request. Dismantling, transport and loading can be organized throughout Europe for an additional charge, if desired. Prices plus VAT. Inspection possible by appointment. Contact us; our team will be happy to assist you. Trade-in or exchange possible! Machine purchase/sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality, but affordable, metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: excellent (used), functionality: fully functional, A very nice Polar cutting machine is for sale. Type 55 EM. Features hydraulic pressing programs and a chrome table. Comes complete with 3 extra blades and a tools manual. Hodpfx Asz Hn Abof Sou You are welcome to test this machine at our facility. We can arrange transport and packaging for you and load it into a truck or container. Please inquire for a price including transport (location: the Netherlands). Best regards, Henk Hoos.

Condition: like new (used), functionality: fully functional, overall weight: 7,000 kg, This machine is configured with 4 fully electronic CNC axes and has integrated software that generates the automatic program. Description Maximum gear diameter: 400 mm Gear width: 76 mm Stroke: 82 mm Rotation: 150 - 700 rpm Hjdpfx Afewvbqis Seu Module: min. 0.5 mm Module: max. 6 mm Machine weight: approx. 7500 kg Electrical equipment: – Operating voltage: 380/400 V – Protection: 20kva Machine with new CNC Siemens 808D Siemens drives and servomotors New update 2025 Screens for automatic program generation Automatic cycles NR12 Included in Chip conveyor Coolant tank Automatic lubrication Digital pressure controls Hydrostatic guide

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: CC41011401EJ, working width: 2,000 mm, cutting width (max.): 2,000 mm, cutting height (max.): 70 mm, Investronica CV040/070 automatic multi-ply cutting system, built February 2003 in Madrid. In working order. TECHNICAL DATA Manufacturer: Investronica Sistemas, Madrid (Spain) Model: CV040/070 Hodpez Atvuofx Af Sou Identification: LOOCC4.100V000.B0 Serial number: CC41011401EJ Date of manufacture: February 2003 Useful cutting width: 2,000 mm Cutting height: 70 mm compressed fabric Cutting window: 2,200 mm, continuous length with conveyor belt Vacuum system: high-efficiency vacuum generation, integrated module Feed: automatic advance system Sharpening: automatic blade sharpener on the cutting head Blade speed: variable control Table: evacuation table with conveyor belt Approximate weight: 3,000 - 4,000 kg, to be confirmed on dismantling EQUIPMENT INCLUDED 1. Investronica CV040/070 automatic cutting table with cutting head, blade sharpener, integrated vacuum module and evacuation table with conveyor belt. 2. Control station built into the machine, with monitor, keyboard and computer. 3. Investronica P2000 pattern plotter. The machine is installed and running in Seville. It can be seen and tested in operation by appointment. Machine owned by the seller, free of encumbrances.