Used Gea Chiller for sale (189)

Year of construction: 2011, condition: ready for operation (used), A compact ammonia refrigeration system GEA with evaporative condenser and pump-operated plate evaporator is available. Design: split design, refrigeration capacity: 247kW, compressor speed: 1450rpm, evaporation temperature: 0.7°C, condenser capacity: 300kW, wet-bulb temperature: 21°C, max. condensing temperature: 35°C, refrigerant: NH3, max. operating pressure high pressure/low pressure: 23bar/16bar. Secondary refrigerant: electrolysis water, secondary refrigerant temperature inlet/outlet: 6°C/2°C, secondary refrigerant volume flow: 54m³/h, secondary refrigerant pressure drop: 53kPa, refrigerant charge: 50kg, oil charge: 20l, compressor: Grasso 410. Machine dimensions X/Y/Z: approx. 4300mm/2000mm/2800mm, weight: approx. 6500kg. Documentation available. An on-site inspection is possible. Lodpex Sywajfx Akceac

Condition: used, Year of construction: 2015, Manufacturer: GEA Type: single wall tank Ljdox R A T Iepfx Akcsac Year : 2015 Capacity : 290 L Diameter : 61 cm Depth : 108 cm Temperatures: min 0°C – max 90°C Load cells: 4 units -> Sartorius PR6211/22 01 (max 200kg)> Endress+Hauser Liquiphant M vibrating fork level sensor / detector

Condition: used, Quantity available: 14 units Manufacturer: GEA Tuchenhagen Type : Butterfly valve Model T-smart 7 / 7881 TM1.P2AAL/81 Nominal diameter : DN 25 Setting air pressure : min 4,8 bar / max 8 bar Laedpfxox R A S Rs Akcjc Fluid pressure : 10 bar max Stainless steel : 316 L

Condition: used, Quantity available : 2 units Manufacturer: GEA Tuchenhagen Type: Butterfly valve Model T-smart 7 / 7111 TM1.P2AAL/81/52 Nominal diameter : DN 25 Setting air pressure : min 4,8 bar / max 8 bar Ljdpfxex R A S Ds Akcjac Fluid pressure : 10 bar max Stainless steel : 316 L

Condition: used, Quantity available : 2 units Manufacturer: GEA Tuchenhagen Lajdpfxox R A Swj Akcoc Type: Butterfly valve Model T-smart 7 / 7991 TM15P2AAL/81/52 Nominal diameter: DN 25 Control air pressure : min 4,8 bar / max 8 bar Fluid pressure : 10 bar max

Condition: used, Quantities available : 4 units Manufacturer : GEA Tuchenhagen Type: Butterfly valve Model T-smart 7 / 7881 TM1.P2AAL/81/52 Nominal diameter : DN 65 Control air pressure : min 4,8 bar / max 8 bar Ledpfx Aex R A Sqekcsac Fluid pressure : 10 bar max Stainless steel : 316 L

Condition: used, Quantity available : 1 Manufacturer: GEA Tuchenhagen Type : Butterfly valve Model T-smart 7 / 7881 TM1.P2AAL/81 Nominal diameter : DN 80 Control air pressure : min 4,8 bar / max 8 bar Fluid pressure : 10 bar max Ljdpfx Aksx R A Skjcsac Stainless steel : 316 L

Condition: used, Quantity available: 1 unit Classification: ATEX Manufacturer: GEA Tuchenhagen Lajdpfex R A Sdox Akcsc Model T-smart 7 / 7881 SES.P22EEE/43/65 Nominal diameter : DN 80 Type : Butterfly valve Set air pressure : min 4,8 bar / max 8 bar Fluid pressure : 10 bar max Stainless steel : 316 L

Condition: used, Quantity available : 1 unit Manufacturer: GEA Tuchenhagen Lasdpfx Aksx R A R Tecec Type: Butterfly valve Model T-smart 7 / 7881 TM1.P2AAL DN : 40 Set air pressure : min 4,8 bar / max 8 bar Fluid pressure : 10 bar max Stainless steel : 316 L

Condition: used, Quantity available : 1 unit Manufacturer: GEA Tuchenhagen Type : Butterfly valve Lasdpfxox R A Ryo Akcoc Model: T-smart 7 / 7881 TM1.P2AAL/81 Nominal diameter : DN 50 Control air pressure : min 4,8 bar / max 8 bar Fluid pressure : 10 bar max Stainless steel : 316 L  

Condition: used, Year of construction: 1999, GEA Courtoy R 090/18 rotary tablet press with electrical cabinet R090XT13 Number of positions / stations: 18 Lasdpfx Akjx R Amhococ Punch type: EU D Max. compression force: 100 kN Max. precompression force: 10 kN Production speed: 15,900 – 79,200 tablets / hour. Ø Max. tablet diameter: 25 mm Outer diameter of dies: 56 mm Die height: 23.81 mm Ø Punch body diameter: 25.35 mm Height of the press: 1955 mm Net weight: 1800 Kg Full technical file. Feeding device / Loading hopper / Discharge chute / Allen Bradley control system. Small size. Equipment in excellent condition and low operating hours.

Condition: good (used), fan heater, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating register -Manufacturer: GEA Happel, air heater heat exchanger -Type: 4114/403/441 -Fan: Ziehl-Abegg Ljdpfx Akju Tytajcjac -Operating pressure: max. 13.4 bar -Number: 2x air heaters available -Price: per piece -Dimensions: 710/550/H495 mm -Weight: 60 kg/piece

Condition: good (used), fan heater, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating register -Manufacturer: GEA Happel, air heater heat exchanger Laodpju Tlhvofx Akcsc -Type: 4124/403/441 -Power: kW -Nominal air output: approx. 2800 m³/h -Fan: Ziehl-Abegg -Operating pressure: max 13.7 bar -Number: 2x air heaters available -Price: per piece -Dimensions: 885/550/H600 mm -Weight: 90 kg/piece

Condition: like new (used), Year of construction: 2012, The refrigeration unit is in new condition with storage marks. Laodpfxsmmdq Ts Akcjc Weight: 400 kg Height: 205 cm Width: 130 cm Depth: 65 cm

Condition: used, Used GEA Niro Soavi Type NS 3110 Stainless steel high-pressure homogenizer, sanitary design Stages: 2 Capacity Min: 1,200 Max: 6,000 L/h Pressure: Up to 450 bar Ljdpfx Asxr Nybokceac Motor power: 90 kW 380 V 50 Hz

Condition: used, Year of construction: 2006, functionality: fully functional, Item: D-8700-GEA-Heat Exchanger Stainless Steel Heat Exchanger VT20 COL-S-10 Lsdpfow T Tk Usx Akcsac Pressure: -1 / 6.0 bar Temperature: 0.0 / 100 °C Volume: 11.14 Year: 2006 Food industry

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, input voltage: 380 V, type of input current: three-phase, input current: 24 A, Excellent condition brine injector – complete steaker line (type TDC-400), brine cooler and brine filter, little used, fully functional. 3-phase connection, 12 kW, 24 A, 380 V. We speak English, German, and ex-Yugoslav languages. Contact also possible via WhatsApp. Ledeyfgwlspfx Akcjac

Condition: excellent (used), 2 x KHS / GEA High Speed Keg Filling Lines Capacity: 1,000 kph Sizes: 15L, 20L, 30L, 50L 60L Keg Palletiser System also available. Laedpfsxcinmjx Akcsc Location: Dublin Please contact Indassol for further details & pricing.

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: P281560766/3, power: 2.35 kW (3.20 HP), Single outlet roof top air coolers in good condition including their fans. AVAILABLE the following codes : DEA 093DL-DEB 081D-DEB 094DL-DEBE 072D-DEBE 081D-DEBE 082D-DPA 032S-DPA 041S-DPA 042S-DPA 043S The posted price is per piece. Ljdpfx Akeul U Auecsac

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 2514070/0200/2007/15128743/1, Used evaporator GEA KÜBA, typ CA.E.06-1X1F, serial no. 2514070/0200/2007/15128743/1 Year of manufacture 2007 Casing Self-supporting construction, fan sections individually partitioned. Ventilator extremely silent (E)• Casing and legs from galvanized sheet steel • Temperature- and UV-radiation resistant powder coating RAL 7032 pebble gray • Lifting hangers standard Heat exchanger Standard tube arrangement lengthwise, staggered, in special copper. • Tubing: Tubes: Ripple Fin, SF-Cu Fins: High performance aluminum fins with Al studs for increased heat transfer Fin spacing: 2,2 mm. • Multi-circuiting possible. • Fluid connections Brazed copper connection vertical (can be used with vertical and horizontal airflow). 3. Axial fans Compact unit without external pressure, corrosion proof and weather resistant: Motor with fans, Fan guard in accordance with DIN 31001/24167 and assembly brackets. • Fan blades ø 650 mm, balanced in two levels according to a VDI 2060 standard. • Motors, threephase current 400±10%V, 50 Hz, 2 speeds, ∆-Y-connections, Protection: ø 650, IP66 • variable speed control by reduction of voltage. • Proof to frequency changes (maximum fan pitch dU/dt=500V/µs; Ljdpfxeip Utaj Akcsac Standard protection of motor by thermocouples. • For outdoor installation and ambient motor temperatures of -30°C up to +60°C. CA. 05 – 06 • 400V±10%V-3 with speed reduction ∆-Y-change-over • Protection CA.06: IP66 • Range of application: –30°C to +60°C • 230V±10%V-1 on request Maximum permissible 60 starts per hour. Fan motors have to be operated for at least two hours per month. • Other motors will change performance and Sound Pressure Levels quoted. The standard fans are recommended for frequency converters with a: • clock frequency: < 16kHz • voltage speed increase : , dU/dt < 1000V • frequency: f < 60Hz For reduction of peak voltages, speed voltage increase and motor noise (at reduced speed) manufacturers of frequency converters recommend the use of sinus filters at the output, especially when using motor cables longer than 50 m. For shorter motor cables dU/dt motor reactors can be used for this purpose. If several motors are connected, the total of all cable lengths has to be considered. Taking electromagnetic compatibility guidelines into consideration, power chokes or input filters are to be used at the input side (and shielded cables having a proper ground connection are to be used) LxBxH: 141 х 115 х 114 cm; Colant R typ Very good condition Price Euro 1200 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Year of construction: 1988, from training workshop, public authority pivotable for long workpieces used, in good condition machine cleaned, overhauled greased, function tested, trial run manufacturer Gea type Kapre 3000 year of manufacture 1988 one-sided from below press cylinder 1 heating rail working length 3000 mm pneumatically operated Ljdpewbi Exjfx Akceac mobile New parts: mist lubricator compressed air lines 2 pot seals for press cylinder 2 pot seals for clamping cylinder plug for heating rail Storage location 97447 Gerolzhofen, loaded free on truck, unpacked Handover in current condition as inspected, without warranty or liability

Condition: used, Year of construction: 1980, used, good conditionmake GEA-Casadeitype DE 410year 1980machineNr. 80-12-72planing width approx. 410 mmtable length infeed approx. 1200 mmtable length outfeed approx. 1000 mmjointing bartable lips slotted/low noisenumber of knives 4 piecessuction connection D 120 mmspace requirement approx. 2300 mm x 800 mm x 1000 mmstorage place 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as inspected,without warranty and guarantee Lajdpfjvwfxzox Akcec

Condition: excellent (used), functionality: fully functional, GEA / Stork / Koppens Forming, Breading, and Frying Line Manufacturer: GEA / Stork / Koppens Line type: forming, breading, and frying of food products The line consists of the following equipment: 1. Meat Bin (stainless steel) Capacity: 200 l 2. 200 l Bin Lifter Manufacturer: CFS Type: LFT (R) Machine number: 1642 Power supply: 400 V, 3-phase, 50 Hz Power: 0.55 kW Current consumption: 1.8 A Weight: 310 kg Lifting height: up to 2200 mm (adjustable) Dimensions: 1200 × 1300 × 3000 mm 3. Former Manufacturer: GEA Food Solutions Bakel B.V. Model: MultiFormer 400 Machine number: E022110205415 Year of production: 2021 Power supply: 380–415 V, 3-phase, 50 Hz Power: 8 kW Current consumption: 15.4 A Belt: stainless steel wire mesh Belt width: 400 mm Machine dimensions: 3100 × 1000 × 2700 mm Additional forming accessories: - 2 pallets of forming plates - Stainless steel rack with 2 additional discharge belts (belt width: 400 mm) - Rack dimensions: 1350 × 600 × 2100 mm - GEA tool trolley - Trolley dimensions: 1200 × 700 × 950 mm 4. Breading Machine/Breader Manufacturer: Stork Titan B.V. Model: RotoCrumb TRC 630 TD 2112 Type: 4780626AA Serial number: 10061097 Year of production: 2007 Belt: stainless steel wire mesh Lasdpex H T Egsfx Akcec Belt width: 630 mm Dimensions: 3600 × 1600 × 2100 mm 5. Stainless steel platform for IBC tanks Working height: 1800 mm Dimensions: 1200 × 1500 × 2800 mm 6. Fryer Manufacturer: Koppens Machinefabriek B.V. Type: BR 3000 / 600 Machine number: 1316 Year of production: 2000 Power supply: 400 V, 3-phase, 50 Hz Power: 1.5 kW Current consumption: 4.6 A Weight: 2450 kg Belt: stainless steel wire mesh Belt width: 600 mm Frying length: 3000 mm Heating system: thermal oil Manual hoists Fryer dimensions: 5400 × 1600 × 3200 mm Fryer accessories: - Valve station – 2200 × 600 × 2600 mm - Thermal oil station with pump – 1300 × 800 × 2700 mm - Stainless steel cabinet with 2 Ansul fire extinguishers – 600 × 210 × 750 mm 7. Oil Tank (stainless steel) Manufacturer: Koppens Machinefabriek B.V. Diameter: 1100 mm Height: 3200 mm 8. Belt Conveyor with Covers Manufacturer: Koppens Machinefabriek B.V. Model: NGT 5000/600 Serial number: 12 Power supply: 380 V, 3-phase, 50 Hz Belt width: 600 mm Dimensions: 6900 × 900 × 1150 mm 9. De-elevating Belt Stainless steel wire mesh belt Belt width: 330 mm Adjustable height Dimensions: 2000 × 800 × 850 mm Complete GEA / Stork / Koppens line is intended for industrial production of formed, breaded, and fried food products such as nuggets, burgers, patties, and convenience foods. The line enables a continuous and automated processing workflow — from raw material loading, through precise forming and even breading, right up to controlled frying with thermal oil. The set is characterised by high performance, robust stainless steel construction, and the potential for integration with other production line elements.

Condition: good (used), functionality: fully functional, Used machine in very good condition, was in operation last year. Ljdpfx Aovr E Edjkcsac

Year of construction: 2001, condition: excellent (used), Westfalia Decanter Manufacturer: GEA Westfalia Separator AG Type: CA 365-010 Year of manufacture: 1978 Drum speed: 3,300 rpm Last operational until: 2004 Application area: Used in the production of base oils for the removal of solid particles. Laedpfx Aksd Rwwxecjc The decanter was decommissioned after a production change in 2004 and is therefore fully functional.