Used Gathering Tower for sale (544)

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system External dimensions: Height 5750 mm Width 3350 mm Depth 1550 mm Hedpfx Adodvlt Hj Uonh 26 supports for a payload of 250 kg each In the clear usable dimensions: H = 335 mm W = 2650 mm D = 450 mm Chain jump 381 mm Storage table at a height of 1000 mm above the top of the machine - wood/rubber worktop Color: gray/blue Surfaces cleaned, signs of wear possible Motor power: 1 x 3.0 kW / 400 volts Subject to errors, technical changes, or deviations from details in photos Delivery and installation currently mainly in Germany, Austria, and several neighboring countries

Condition: reconditioned (used), Mechanically overhauled machine with new LTG StoreControl L control system External dimensions: Height 8,760 mm Width 2,778 mm Depth 2,800 mm 2 identical machines available 48 beams, each with a payload of 340 kg with the following clear usable dimensions: W = 2,448 mm D = 816 mm H from 50 to 720 mm Total machine load capacity up to 2 x 20,000 kg Start of the access opening 900 mm above the top floor, then 750 mm high Color scheme: GRAY/BLUE, beams are sendzimier-galvanized, surfaces cleaned, signs of wear may occur Hnjdpfxsd Rh Dvo Ad Uoh Performance values: Vertical drive 1 x 3.0 kW / 400 volts Horizontal drive 1 x 0.37 kW / 400 Volt Subject to errors, technical changes, and deviations from the photos. Delivery and installation currently primarily in Germany, Austria, and several neighboring countries.

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system Control system upgrade available 2 identical machines available External dimensions: Height 4730 mm Width 3270 mm Depth 1680 mm 29 supports, each with a payload of 250 kg In the clear usable dimensions: H = 215 mm W = 2730 mm D = 620 mm Chain pitch 254 mm Intermediate shelves are available for 0 support sets, allowing a payload of 160 kg per usable level. Intermediate shelves can be manufactured upon request. Hsdpfxednhz Ue Ad Usnh Storage table at a height of 900 mm above the top of the machine - V2A steel worktop cover Color: Gray / Gray Surface cleaned, signs of wear may occur Drive motor power: 2 x 1.5 kW / 400 Volt Subject to errors and technical changes or deviations in details in the photos. Delivery & installation currently mainly in Germany, Austria, and other neighboring countries.

Condition: good (used), Year of construction: 2016, operating hours: 3,890 h, filter area: 222 m², suction capacity: 20,000 m³/h, IVAT 20000 m3/h filter ventilation tower Industrial welding hall filtration - numerous technological processes in production plants, mainly carried out in metalworking. Suction from the top and draft-free exhaust from the bottom - exactly to the workplace. The principle of layered filter ventilation, the device does not require the installation of pipelines. Cartridge filter inserts - self-cleaning by means of compressed air pulses during operation. Filter cleaning by means of pressure difference - no loss of compressed air. The principle of layered ventilation: contaminated air is sucked in from the top, filtered and then released at floor level as clean air suitable for breathing without generating drafts, at a speed below 1.2 m/s. Exactly where employees inhale it. And this in a wide range of 270 degrees. The tower operates in accordance with the principle of layered ventilation, recommended by trade unions and considered the best type of air circulation. Brand: IVAT Model: Air FTower-20.000 Year of production 2016 Working hours: 3890 Parameters: 15 kW fan Air flow 20000 m3/h Filter surface 222 m2 6 cartridge inserts Hnjdpfjvrgbtsx Ad Ujh Built-in frequency converter. Additional final fine filter with an area of 65 m2 in filtration class F9 gives us higher air purification efficiency and additionally protects the fan in the event of damage to the main filter. Dust drawer with a capacity of 200 l. Very quiet operation 75 dB (A) Purification degree - > 99.9 % Stock no.: 0944

Condition: good (used), Year of construction: 2018, AMBITOWER 10 series filter ventilation (filter tower) is used for welding fume extraction in production halls. Efficient compact hall ventilation systems are used wherever selective smoke detection alone is not sufficient or direct detection during welding work on large or complex metal parts seems unfeasible. Filter towers not only provide effective separation of contaminants, but also contribute to significant savings in hall heating costs in winter. Depending on the application, energy costs can be reduced by up to 70%. This is ensured, among other things, by highly efficient M-class fixed filter cartridges, which guarantee 99% separation efficiency, so that warm, purified air can return to the hall and there is no need to bring in outside air. Areas of application for Keller Ambitower 10 stationary welding fume filtration systems : Welding fume extraction in production halls (hall ventilation system) Ideal for all work areas where local extraction is not practical or not possible, metal industry Mechanical engineering Automotive industry Vehicle construction aircraft construction, etc. Parameters : Engine power - 7.5 Kw. Built-in inverter Capacity - 10000 m3/h Filtration area - 90 m2 Hnsdpfxji Atb Ts Ad Ush Antistatic filter cartridges Noise level - ≤ 75 Year of manufacture: 2018 Technical documentation included dimensions: width - 2.35m x 1.35m height - 3.50 m Weight - 1800 kg

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Kemper CleanAirTower - CleanAirTower room air purification Energy-efficient room ventilation based on the displacement ventilation principle for welding fumes in production halls Application area: - For production and storage halls with high dust loads - Workshops where local extraction is not possible - As a supplement to local extraction systems - Environments with changing sources of dust/fume Benefits/Features: - Effective energy capture through Pinball method and Tornado principle - Low risk from foreign objects Hnjdpowthbvofx Ad Ush - Reduced heating costs due to air recirculation and distribution - Long filter service life through optimized airflow - High safety due to dust disposal without contamination - Cost-effective installation, also retrofittable, as no ducting is required - New head element retrofittable to existing systems - Safe transport and easy installation via crane lugs - KEMPER-Cloud connection via mobile network Technical data: * max. volumetric flow: 6,000 m³/h * filter area: 60 m² * motor power: 5.5 kW * supply voltage: 3 x 400 V, 50 Hz * control voltage: 24 V DC * rated current: 11.0 A * sound pressure level: 72 dB(A) * compressed air connection: 5 - 6 bar * dimensions (W x H): 1,172 x 3,622 mm * weight: approx. 666 kg

Condition: used, Year of construction: 2011, machine/vehicle number: 1205, Perfect binding line Kolbus KM 412.B Year: 2011 Hnjdst Rmhaopfx Ad Ujh Consisting of Book block feeder Meccanotecnica XMT Year: 2011 - Infeed conveyor from the right Gathering machine Kolbus ZU 841.B Year: 2011 Description: - Hand feeding station - Universal base: 18 - Number of gathering stations: 18 - ATC thickness control - Optical sheet control: SignalLynx Card gluer Kolbus KK 841 - Hotmelt glue unit: Nordson Problue - Air center: VariAir central system - Reject gate for incomplete products: AS 841 - Set up element - Intermediate element with vibrating - Transfer into the binder Perfect binder Kolbus KM 412.B Year: 2011 Description: - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - Cold glue spine gluing, interchangeable - Intermediate drying station (infrared) - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson XNO 962 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: LH 375.A - Gauzing station - Heating elements in curve: IR - Stream cover feeder: SAL 413.B - Scoring station: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE Description: - Transport system, length (approx) - Escape delivery Conveyor tower Three knife trimmer Kolbus HD 153.P Year: 2011 Product counter: 148 mio Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Book stacker Kolbus (RIMA) XRS 130 Year: 2011 Description: - Compensating stacker - Delivery to the left and right

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Complete saddle stitching line composed of: - Wohlenberg 7010 gathering machine – 16 stations - Conveyors - Solema cooling tower 25m - Wohlenberg Trim-tec 60i three-knife trimmer - Solema book stacker mod. Hodpeyazadsfx Ad Usnh

Condition: excellent (used), Year of construction: 2005, operating hours: 66 h, functionality: fully functional, machine/vehicle number: MMFE 965122, Perfect binding line Acoro A5, 28-station gathering machine type 1571, tensioning element + handfeeding unit, 2x vacuum pumps, in-house blow air, reject gate type 1572 NN19204 FE 965122 for incomplete products, spiral raceway type 3641 MMFFE 965122/025, transfer unit to perfect binder type 3635 MMFE 965122 prepared for book block feeder, 20-clamp Acoro A5, main milling station, pre-stations with roughening and notching, hotmelt spine and side glue, spine glue premelter c80, side glue premelter, PUR spine glue, PUR premelter, gauzing station, pile cover feeder, scoring station, double nipping station, laydown onto conveyor system. Solema drying tower one up and one down, total drying conveyor length approx. 40 m. Reject gate, Merit-S three-knife trimmer right-hand infeed machine number 358465/361275, Uno compensating book stacker machine number 15340411 NNN 33114. Hnodpfsx Rym Esx Ad Ush

Condition: excellent (used), Year of construction: 2009, Perfect Binding Line, consisting of: Gathering Machine ZU 841.A - basic frame with 21 gathering stations - 19 standard feeders - 1 handfeeding station (covering 2 housing stations) - device for electrostatic fixation of three advertising medias - integrated jogging station - Aircenter - reject unit AS 841 to the right - transfer channel as connecting unit to the binder Perfectbinder KM 473 - 26 clamps - handfeeding - main milling station - equalized milling station - notching station - micro-notching station - brushing station with roller brush - 2 Hotmelt spine gluing units - 1 Hotmelt side gluing unit - 3 premelters LH 375 - IR heating at curve - stream cover feeder SAL 411.A - scoring station for 4 scores - 2 pressing stations - gripper carriage delivery - laydown device Hedpfx Adevg Ad Te Ujnh Transport and Drying Line, incl. Ambaflex drying tower, incl. emergency delivery Three Knife Trimmer HD 153.P - copilot - right hand infeed - counter stacker - silicon spraying device - standard cutting cassettes 7 - 18 additionally available: Kolbus book block feeder with delivery belt Kolbus card gluer KK 841 PUR spine gluing unit with Nordson smelting unit Best for PUR cover 600L Kolbus destacker AE 360 Kolbus blocking unit VB 120 pallettizer Kolbus PL 770 or Kolbus PL 771

Condition: good (used), Year of construction: 2004, functionality: fully functional, Equipment gathering machine • 6 stations • gatherer Ferag • reject unit • 2 jogging elements perfect binder • perfect binder Publica KM 410 • copilot with touch screen • 40 clamps • infeed incl. coupling with ZU • 2 milling stations • strip milling head • 4 spine preparation stations Hodpfx Adsrf U Iij Uonh • hotmelt spine gluing unit • 2nd hotmelt spine gluing unit • hotmelt side gluing unit • 3 premelters • stream cover feeder SAL 411 • cover scoring 4 lines • 2 pressing stations • straight delivery • lay down device • quality control with individual product rejection conveyor system • length ca. 50 m • drying tower XAF • intermediate delivery • belt control cabinet TS.E three knife trimmer • three knife trimmer HD 152.P • right hand infeed with pre stacker • copilot with touch screen • cutting tables • knife adjustment device • 2 sets of knives compensating stacker • compensating stacker CB 16 • counting device • delivery right

Condition: ready for operation (used), Year of construction: 2006, Built in 2006 Size max 320 x 510 x 70 mm Speed max 15.000 c/h Gatherer 18 stacions ZU 841 - Optical sheet control: SignalLynx - ATC thikness control 1 Reject AS 841 Perfectbinder - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Base for 1st spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - Base for side glue system Hodpfx Aex Np Szjd Uonh - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: LH 375.A - Stream cover feeder: SAL 411.C - Scoring station max: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE - Transport system, length (approx) 50 meters - Conveyor tower Ambaflex - Reject unit Three knife trimmer Kolbus HD 152P - counter: 14,367 mio—only!!! - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Stacker - Rima Stacker 3310 ( Kolbus XRS 130) - Rima Statik device 110

Condition: excellent (used), Year of construction: 2008, Ref: 11035 . 2008 Kolbus KM470 EVA/PUR Ratiobinder Line Space saving perfect binding line with front cut device & gauzing. Comprising: (2008) Meccanotecnica ‘Fido’ Book block feeder 20 station ZU804 gatherer for folded sections and single sheets with hand feed station Becker ‘Air Centre’ vacuum & compressed air supply for gatherer ZA 800 downstream reject device & delivery belt & can be used for separate gathering Extended raceway/transfer with vibrate unit Open section for feeding book blocks Ratiobinder KM470 with 21 clamps TFT visualizing monitors with graphic operator guidance. Cutting, micro-notch & brushing units (in-house extraction) EVA & PUR spine gluing system, comprising; Kolbus LH375.B EVA hot-melt pre-melt unit EVA hot-melt roller type spine gluing unit on mobile base EVA hot-melt roller side-gluing device Nordson ‘Durapail’ PUR pre’melter Nordson PUR spine gluing Gauzing unit I.R. heating in radius for increased glue open time Pile cover feeder with spine pressing & side nipping units Downhill delivery to lay-down device to; Raised TS.E flat conveyor (details on request) system to; XFA660 spiral tower to; Hnjdpfx Aexyin Isd Ujh TSZ 'Intermediate' escape delivery to; (2007) CERMI XCR 650 Front cutting device Kolbus HD150.B Pile trimmer Kolbus XTP 130 Book stacker (2006) Hugo Beck Shrink wrap tunnel Roller belt delivery. Including spares, tools & manuals. N.B. Compressed air supply required (NOT included). Specification: Book size, Max: 383 x 320 mm Max: 460 x 190 mm Min: 105 x 100 mm Book thickness : 3 -- 60 mm Mechanical speed, Max: 6,000 cycles/hr.

Condition: used, Year of construction: 2011, Perfect binding line Kolbus KM 412.B Year: 2011 Hedpfexuad Asx Ad Ujnh Consisting of Book block feeder Meccanotecnica XMT Year: 2011 - Infeed conveyor from the right Gathering machine Kolbus ZU 841.B Year: 2011 Description: - Hand feeding station - Universal base: 18 - Number of gathering stations: 18 - ATC thickness control - Optical sheet control: SignalLynx Card gluer Kolbus KK 841 - Hotmelt glue unit: Nordson Problue - Air center: VariAir central system - Reject gate for incomplete products: AS 841 - Set up element - Intermediate element with vibrating - Transfer into the binder Perfect binder Kolbus KM 412.B Year: 2011 Description: - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - Cold glue spine gluing, interchangeable - Intermediate drying station (infrared) - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson XNO 962 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: LH 375.A - Gauzing station - Heating elements in curve: IR - Stream cover feeder: SAL 413.B - Scoring station: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE Description: - Transport system, length (approx) - Escape delivery Conveyor tower Three knife trimmer Kolbus HD 153.P Year: 2011 Product counter: 148 mio Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Book stacker Kolbus (RIMA) XRS 130 Year: 2011 Description: - Compensating stacker - Delivery to the left and right

Condition: ready for operation (used), Year of construction: 1993, Machine number 135 Built in 1993 Size max 510 x 290 x 65 mm min 125 x 100 x 3 mm Book block thickness max 65 mm min 3 mm Speed max 10.000 c/h Equipment: • 24 stations gather • book bloc feeder • endsheet tipping unit • 32 Clamps • milling and roughening station • hotmelt spine glue station • hotmelt side glue station • cold spine glue station • Kolbus HL Premelter • Nordson Premelter • Nordson Premelter • Slauterback Premelter • stream Cover Feeder • 2 pressing stations • laydown delivery • Cooling Tower Hjdpfx Adsxykdqo Usnh • Kolbus Transport Conveyor w/ All Associated Conveyors • Controls • Large Assortment of Spare Parts

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, product width (max.): 350 mm, product height (min.): 210 mm, product height (max.): 500 mm, product width (min.): 148 mm, paper weight (min.): 40 g/m², paper weight (max.): 350 g/m², No Minimum Price – Guaranteed Sale to the Highest Bidder! OVERVIEW - VAC-60Ha and 2x VAC-60Hc Collating Towers - ST-40 Stacker Delivery - ACF-30 Gathering and Folding Unit - SPF-30S Saddle Stitcher - HTS-30 Three-Knife Trimmer TECHNICAL DETAILS Collating Towers Model: VAC-60a / VAC-60c Technology: Touch & Work Type: Suction and Blower Air Collating Tower Number of Stations: 6 Error Prevention: Miss, Double Sheet, and Jam Detection Job Memory: 9 storage spaces for repeat jobs Programs: Double Cycle (Non-stop Operation), Insert Sheets (single and double), Booklet Program, Block Program, Selective Collating Scalability: Up to 6 towers (36 stations) Size Range: max. 148 - 500 × 120 - 350 mm Paper Weight: 40 – 350 g/m² Loading Capacity per Station: 130 mm Production Speed: Up to 9,500 sets/h Power Supply: 230 V; 50/60 Hz – 1.86 kW Dimensions (W × D × H): 842 × 652 × 1,961 mm Collating Towers Model: Horizon VAC-60Hc Function: Dual-Side Collating Use: Towers may be used independently Weight per Tower: 310 kg Stitching Line System Model: Horizon Stitchliner 5500 Components: ACF-30 + SPF-30S + HTS-30 (Gathering & Folding + Saddle Stitcher + Three-Knife Trimmer) Format Setting: Fully Automatic Format Templates: DIN sizes and standard folding patterns Job Memory: 200 storage spaces for repeat jobs Stitching System Stitch Types: Saddle, Block, and Corner Stitching Staple Heads: 2 units (expandable to 4) Loop Stitching: Possible with loop stitching heads Hedpfswy U N Tsx Ad Usnh Staple Pitch: 60 - 150 mm Stitching Thickness: max. 5 mm (3 mm with loop staples) Processing Feed Size: 120 - 500 × 148 - 350 mm Paper Weight: 40 – 350 g/m² Processing Thickness: 8 – 200 sheets Speed: max. 5,500 cycles/h Trimming Untrimmed Size: 140 - 350 × 103 - 250 mm Trimmed Size: 120 - 312 × 95 - 230 mm Space Requirements and Weight Installation Area: min. 5,709 × 3,240 mm Stitchliner Weight: 2,120 kg Power Supply: 400 V / 50 Hz

Condition: good (used), Year of construction: 2006, Horizon Stichliner SL5500: Gathering towers VAC 60a+m+m+m Hsdpsvmfxgefx Ad Ujnh ST40, Horizon ASF 30, SPF 30 Trimmer HTC 30 Counter reading only 14.2 million

Condition: not inspected (used), functionality: unexamined, Year of construction: 2009, operating hours: 69,572 h, machine/vehicle number: 28510308, sheet thickness (max.): 20 mm, table height: 940 mm, travel distance X-axis: 3,270 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 100 mm, No reserve price – guaranteed sale to the highest bidder! Auction of an Amada laser cutting system + LKI storage tower! Placing a bid obliges the buyer to collect the equipment within the specified timeframe between 23.03.2026 and 27.03.2026! AMADA LC-3015 F1 NT TECHNICAL DETAILS Travel Range X-axis: 3,270 mm Travel Range Y-axis: 1,550 mm Travel Range Z-axis: 100 mm Travel Range B-axis: 21 mm Cutting Area X-axis: 3,070 mm Cutting Area Y-axis: 1,550 mm Cutting Area Z-axis: 100 mm Cutting Speed X/Y: 0 – 60 m/min Rapid Traverse X/Y/Z: up to 120 m/min Table height: 940 mm Hedpeycqfujfx Ad Usnh Workpiece weight: 920 kg Sheet thickness mild steel: up to 20 mm Sheet thickness stainless steel: up to 12 mm Sheet thickness aluminum: up to 10 mm MACHINE DETAILS Control: AMNC-F Control type: CNC path control Controlled axes: X, Y, Z, B Simultaneously controlled axes: X, Y, Z Laser model: FANUC AF4000i-B Laser type: CO₂ laser Laser class: 4 Laser radiation: invisible Laser principle: AC-HF excited, fast axial flow Rated power: 4,000 W Max. power: 4,000 W Peak power: 5,000 W Stability: ±2 % Frequency range: 5 – 2,000 Hz Pulse duty cycle: 0 – 100 % Wavelength: 10.6 µm Laser beam diameter (output): 27 mm Laser beam divergence: < 2 mrad Cooling & Supply Chiller throughput: > 160 l/h Power supply: 55 kVA Positioning laser Laser class: 3R Laser radiation: visible Rated power: < 5 mW Pulse duration: CW Wavelength: 0.6 – 0.7 µm Laser medium: Semiconductor or HeNe Drive type: Linear drives Cutting gas regulation: automatic Machine weight: approx. 11,000 kg LKI ASLUL 300 F1 Storage Tower (Year of manufacture: 2009) TECHNICAL DETAILS Cycle time: approx. 3 min Pallet changeover time: approx. 50 s Raw sheet / unload pallets: 2 + 4 or 3 + 3 Maximum pallet weight: 3,000 kg Sheet size: max. 3,000 × 1,500 mm Sheet size: min. 2,000 × 1,000 mm Material thicknesses Automatic mode: 0.8 – 20 mm Shuttle mode: 0.8 – 25 mm Load data Sheet weight: max. 920 kg Load on cutting pallet: max. 920 kg Stack heights Raw sheet pallet stack height: max. 150 mm Unload pallet stack height: max. 220 mm Finished part size Finished part size (X × Y), free cut: min. 225 × 180 mm MACHINE DETAILS PLC: Mitsubishi Q-Series Operator interface: Beijer E1060 Dimensions & Weight Dimensions (L x W x H): approx. 4,630 x 4,225 x 6,000 mm Total weight: approx. 11,000 kg EQUIPMENT Double sheet detection Overall dimensions (Amada + storage tower) Overall dimensions (L x W x H): approx. 11,000 x 10,000 x 6,000 mm Total weight: approx. 22,000 kg SCOPE OF DELIVERY Available manuals Note: The power supply displays an error message. It may be defective.

Condition: good (used), SPM Vibro Polishing Machine Model LPG - EVO - MAG (UP1) With Allen Bradley Touchscreen Control Hnodoyilv Eopfx Ad Ush TECHNICAL DATA- Machine Power Supply Voltage VAC 400. Filtering Unit Power Supply Voltage VAC 230. Total Installed Electrical Power A 22 - 32. Power Supply Frequency Hz 50-60. Main Air Supply Pressure 6 bar. Pinch Valves Air Supply Circuit Pressure 2-3,5 bar. Diaphragm Valves Air Supply Circuit Pressure 6 bar. Compressed Air Supply Fitting G 3/8. Mains Water Supply Pressure 2 bar. Mains Water Supply Fitting G 3/4. Box Vibration Motor Power 4kW. Washing Unit Vibration Motor Power 3,2 + 3,2kW. Vacuum Power 4kW. Box Load Capacity 600kg. Box Dimensions W620 x D620 x 730mm. Washing Unit Capacity 315 Litres. Washing Unit Load Capacity (Polishing Media) 1,500kg. Delivery Pump Flow Rate L/s 0÷52 l/min (3,1 m³/h). Discharge Pump Flow Rate L/s 0÷52 l/min (3,1 m³/h). Vacuum Weight 170kg. Vacuum Dimensions W1,130 x D600 x H1,530mm. Total Machine Weight 2,400kg. Machine Overall Dimensions Without Cabin W2,310 x D1,500 x H1,750mm. Total Cabin Weight 600kg. Machine Overall Dimensions With Cabin W3,200 x D1,900 x H1,910mm. With Soundproof Cabin, Pneumatic Loading Door, Polishing Fluid Filtration Tank, Clean Fluid Tank, Used Fluid Tank, Flexible Hose For Manual Suction & Signal Tower.

Condition: used, Year of construction: 2021, machine/vehicle number: LE23500, This Liebherr 34K crane, including crane logbook and remote control, will be auctioned online as part of our RESTLOS industrial auction "Company Liquidation Johanni Bauunternehmung GmbH – Vehicles, Construction Machinery, Excavators, Cranes, Tools, Materials, Office Equipment and much more." The trailer and many other construction machines, building accessories, and commercial vehicles are available on our RESTLOS auction platform. Further information: Year of manufacture: 2021 Serial No.: LE23500 Hnedpfoykp N Ijx Ad Uoh 15,500 kg With radio remote control (see photo) Functionality untested Crane inspection logbook included Functionality untested, as pictured Other items shown in the photos are not included in this lot.

Condition: new, Empty weight: 240.000 kg Cargo space capacity: 3.000.000 l Productivity: 120 tph FULL AUTOMATIC TOWER ASPHALT PLANT 1.1 COLD AGGREGATE FFEDING CHASSIS(6*12m3) 6 1.2 Feeding bunkers and dosage conveyor bands 1+1 1.3 Collector and dryer mounted on the feeding conveyor band 1 1.4 STATIONARY CHASSIS 1 1.5 ROTARY DRYER GROUP 1 1.6 Dryer body 1 1.7 Aggregate inlet head 1 1.8 Aggregate outlet head 1 1.9 Burner group (BALTUR) 1SET 1.10 Burner fuel pump 1 1.11 Burner blower fan 1 1.12 Elevator inlet 1 2.1 MIXER CHASSIS GROUP 1 2.2 Asphalt Mixer + Hot Aggregate Elevator 1 2.3 Aggregate weighing scale bunker 1 2.4 Filler Elevator and Weighing scale bunker 1 2.5 Filler Screw Conveyor 1 2.6 Bitumen weighing scale bunker 1 2.7 Mixer bitumen pump 1 2.8 Undersize hot aggregate silo(50T) 3 Hnsdpoykadvefx Ad Ueh 2.9 Filler stock silo 25 M3 2 2.10 Vibration Screen 1 3 DUST COLLECTING FILTER SET 3.1 Jet-Pulse filter body 1 Set 3.2 Nomex filter bag and cartridges 1 Set 3.3 Dust collector V spiral and bunker 1+1 Set 3.4 Filler silo(25Tons) 2 Set 3.5 Filler Screw Conveyor 2 Set 3.6 Filter absorption fan 1Set 3.7 Dirty gas channel 1 Set 3.8 Chassis group 1 Set 4 BITUMEN STOCK TANK 4.1 50 Ton capacity boiling oil heating isolation bitumen tank(One for PMB)With Stirrer(Vertical) 3 SET 4.2 3 way pneumatic jacket valve group 2 SET 4.3 Mixer bitumen feeding pump 1 SET 4.5 Mixer bitumen weighing scale feeding pipe line 1 SET 4.6 Bitumen transfer pump 1 SET 4.7 Double wall bitumen pipe installations 1 SET 4.8 50 Ton capacity boiling oil heating isolation bitumen tank 1 SET 4.9 3 way pneumatic jacket valve group 2 SET 5 FUEL AND THERMAK GENERATOR CHASSIS GROUP 5.1 1.000.000 kcal/h capacity Thermal oil generator 1 SET 5.2 Boiling oil heating boiler 1 SET 5.3 Boiling oil circulation pump 1 SET 5.4 Fuel replenishing pump 1 SET 5.5 Fueling pump 1 SET 5.6 Automation-Control Cabin-Software-Compressor 1 SET 6 Granulator Feeder(Fiber Feeding with fan drive) 1 SET 7. Col Asphalt Recycling System(5m3 Hopper Feeder,500x22000mm Belt Conveyor,800x4000mm Belt Conveyor with Weighing System) 1 SET 8. Cladding(3 mm Deck Sheet on 50x50 Box Profile Coating) for Aggregate Hopper and Mixer Floor 1 SET 9. Real Time Gas Emission Measuring and Monitoring System(Integrated with PLC and Plant Automation)(Obserable by internet Connection) 1 SET 10. Dust Monitor PCE-PQC 23US Incl. Calibration Certificate 1 SET

Condition: ready for operation (used), Year of construction: 2015, spindle motor power: 7,500 W, spindle speed (max.): 7,000 rpm, overall weight: 2,200 kg, total height: 1,700 mm, workpiece diameter (max.): 32 mm, number of axes: 7, This 7-axis Star SR-20J type C Swiss Type Turning was manufactured in 2015. It features a maximum machining diameter of 32mm, headstock stroke of 310mm, and spindle speeds up to 7,000rpm. Equipped with a Hydrajet BF20-2000 high-pressure coolant system and an Absolent A.Mist 10S mist extraction unit, the Star SR-20J type C represents a robust addition to any machining setup. Contact us for further details regarding this Swiss Type Turning. Additional equipment • High Pressure Coolant System: Hydrajet BF20-2000 • Mist Extraction Unit: Absolent A.Mist 10S • Fire Suppressor: Stat X • Signal Production Tower: Werna Machine Benefits Qualitative Machine Benefits • Includes comprehensive safety and environmental management systems (fire suppressor, mist extraction) Technical Machine Benefits • Rapid feed rate 24m/min, maximum spindle speed 7000 rpm, maximum driven tool speed 6000 rpm Extra Information Hnsdpfeyi Emtex Ad Ujh Manuals included Machine still under power Dimensions Machine Depth 2250 mm

Condition: used, Year of construction: 2001, Horizon VAC-100a VAC-100m SPF-20A FC-20A Booklet Making System, Used This Horizon booklet making system is a powerful solution for professional booklet production, combining collating, stitching, folding, and front trimming in an efficient process. It offers high productivity, versatile applications, and easy operation for efficient booklet production. Key Features: - Two collating towers: VAC-100a and VAC-100m with 10 stations each - Versatile stitching options: Saddle, corner, and side stitching possible - Touch & Work: Intuitive operation thanks to user-friendly technology - 9 programmable memory locations for repeat jobs - Precise error control: Prevention of miss-feed, double-feed, and jam problems - Expandable configuration: Possibility to add more VAC-100 towers Technical Specifications: - Paper format: max. 350 x 500 mm; min. 148 x 120 mm - Booklet format: max. 250 x 350 mm; min. 85 x 120 mm - Paper weight: 40-300 g/m² - Processing thickness: 2-22 sheets (80 g/m²) - Trimming thickness: 4-50 sheets (80 g/m²) - Front trim: max. 25 mm - Production speed: max. 3,600 booklets/h - Collating performance: up to 9,900 sets/h - Loading capacity per station: 55 mm - Power supply: 230V; 50/60Hz Hodpoyiz T Aefx Ad Usnh - Total power consumption: approx. 2.3 kW All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, Year of construction: 2001, Perfect binding line Muller Martini Year: 2001 Consisting of Gathering machine Muller Martini 3691 Description: - Hand feeding station - Number of gathering stations: 21 - ASAC automatic self adjusting calliper - Pump(s) - Set up element - Reject gate for incomplete products: 3614 - Side stitching unit - Criss cross delivery - Book block feeder - Transfer into the binder Perfect binder Müller Martini Trendbinder (3018/27) Description: Hnsdpfx Adoyitabs Ujh - Number of clamps: 27 - Main milling station - 1st spine preparation station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - Hotmelt spine glue unit, interchangeable - 1st premelter for spine glue unit - Cold glue spine gluing, interchangeable - Base for 2nd spine glue system - 2nd hotmelt spine glue unit, interchangeable - 2nd premelter for spine glue unit - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit - Gauzing station - Cover feeder - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device Transport system - Transport system, length (approx): 35 mtr Three knife trimmer Müller Matini Zenith-S (3672) Description: - Infeed conveyor from the left - Automatic hopper feeder for inline production - Knife pre-setting device - Sets of knives: 1 - Exchangeable cutting tables (standard set): 4-17 Book stacker Müller Matini CB 16 (3631)

Condition: like new (used), Position 1 TS 125 Magnum tower clamping system Jaw width 125 mm Clamping widths: 1 x 476 mm 2 x 226 mm 4 x 108 mm overall height 780 mm Clamping stroke per clamping slide 64 mm Clamping force 40 kN Price: 7.850,00 € + VAT. Position 2 4 pieces hydraulic vices jaw width 125 mm overall length 400 mm Price per piece 850,00 EURO + VAT. Price for 4 pieces 3.000,00 EURO + VAT. Position 6 Preci Tool NC, type 125 jaw width 125 mm overall length 430 only 1 fixed jaw Price: according to bid position 8 HILMA machine vice with rotary plate mechanical/hydraulic clamping force 40 daN jaw width 125 mm overall length 430 mm Price: 850,00 € + VAT. Position 9 HILMA machine vice mechanical/hydraulic clamping force 50 daN jaw width 160 mm overall length 550 mm Price: 900,00 € + VAT. item 10 HILMA machine vice mechanical/hydraulic clamping force 25 daN jaw width 100 mm overall length 380 mm Price: 650,00 € + VAT. item 11 HILMA machine vice with rotary plate mechanical/hydraulic clamping force 40 daN jaw width 125 mm overall length 430 mm Price: 850,00 € + VAT. position 12 HILMA machine vice with rotary plate mechanical/hydraulic clamping force 50 daN jaw width 160 mm overall length 620 mm Price: 1.050,00 € + VAT. Position 26 HILMA machine vice (exhibition version) jaw width 125 mm Hnedpfx Aoic Rnusd Ueh overall length 430 mm Price: according to bid item 28 HILMA machine vice mechanical/hydraulic clamping force 25 daN jaw width 100 mm overall length 570 mm Price: 700,00 € + VAT. Position 32 Clamping angle clamping surface 160 x 420 mm Price: 150,00 € + VAT. Position 33 Clamping angle with HILMA vice jaw width 125 and load cell Price: 450,00 € + VAT.