Used Freeze Dryer for sale (2,258)

Condition: used, Used Niro Mobile Minor stainless steel laboratory spray dryer. This unit has an approximate evaporation rate of 1 to 7 kg/hr depending on product. Has stainless steel chamber approximately 800mm diameter x 915mm straight side. Chamber is lagged and clad. Has electric heater, cyclone and pipework. Unit is mounted on mobile frame. Includes stainless steel Niro centrifugal air operated atomiser. Hsdsygvmrjpfx Ahvji Click on the link below to see a video of the machine running.

Condition: used, Little used Niro model MP3/2/3 10 bar stainless steel multi processor fluid bed dryer / granulator / coater. Rated 10 bar over pressure. Unit includes various bowl inserts, spray arms, and air handling system. Hodjygvmlopfx Ahvji

Condition: used, Used Aeromatic model MP1 stainless steel fluid bed dryer. Stainless steel filter chamber approximately 16 litre capacity with a maximum product volume of 13.5 litre which is hinge mounted and removeable. Operating pressure is 6 bar. Driven by a 3.3kw 3/50 supply. Reportedly minimum batch weight 400g and maximum batch weight 6 kg. Hsdpfxjygvmfe Ahvji

Year of construction: 2025, condition: used, New exhibition machine! Stationary piston compressor with refrigeration dryer, condensate drain, oil-water separator, and pre-/fine filter. The universal model with belt drive and high-quality equipment. Especially suitable for craftsmen. These compressors are used wherever compressed air quality, durability, and efficiency are essential. Long service life thanks to 2-stage high-performance units with low speed, specially machined cast-iron cylinders for minimal oil consumption and extended lifespan, high-performance valves, optimal cooling through large fan wheel, motor with overload protection, easy condensate drainage via standard 1/2'' ball valve, equipped as standard with Condor pressure switch and manometer, supplied on safety stand pallet with vibration dampers. Technical data: Suction capacity 650 l/min, FAD 520 l/min, max. pressure 10 bar, tank capacity 270 l, cylinders/stages 2/2, speed 920 rpm, motor output 4 kW / 400 V Location: Rieth Hjdpfx Asyi Hdyohvei

Condition: excellent (used), Year of construction: 2008, Refrigeration dryer Manufacturer: Kaeser Model: TF 173 Year of manufacture: 2008 Hodpfx Ahsyi A Uzjvsi 2 units available Price per unit

Year of construction: 2019, condition: as good as new (ex-display), 100l dryer for submerged arc flux. 0-400 degree with electronic control Hsdpem Dr Szefx Ahvsi

Year of construction: 2018, operating hours: 35,000 h, condition: used, functionality: fully functional, Description of fully automated dryer Major overhauling made by mid 2025 • The housing of the dryer is welded steel construction. The internal floor is made of perfored sheet board. The dryer has an external casing (walls and ceiling) in sandwich panel. • The dryer is driven by hydraulic power pack. • The dryer is equipped with “Ziehl Abegg”, MAXvent axial fans. It's propeller blades are made out of light casted material. One of the most energy efficient product on the market. Hot air generator is equipped with two “Geo Coil’’ heat exchangers. (fully functional but has bent fins) • The control system is equipped with a touch display for operation and visualization of the Dryer. Remote control via PC possible. Incl. web server on the panel for the visualization of drying processes via Ethernet interface. • Working mode according to air exit temperature. The rotational speed of the fans automatically adjusted by the frequency converters so that a desired air temperature level is maintained. Includes pressure measuring devices and extension of control system. • Dryer’s heat carrier temperature approx. 85°C flow temperature and approx. 65°C return temperature. Heat carrier flow defined as 176m³/h • Drying air ventilators equipped with frequency converters Hjdpfxsxc Eitj Ahvji • Moisture sensors at the outlet of the dryer: YES • Adjustable height of drying bed: YES • Enlarged fuel receiving bin: Yes General specifications • Infeed material: Wood chips • Size of material: G100 • Water content infeed material max. 45% • Water content outfeed material 7-10% • Designed capacity outlet approx. 1.600 kg/h • Density (wet): 300 kg/m³ • Designed drying surface approx.: 97 m² • Designed climate conditions on site: Ambient temperature 0°C; relative humidity 70%, air pressure: 990 mbar • Noise pressure level, 75 dB, (1 m distance from air inlet port) Dryer fans, installed power: 74 kW Dryer hydraulic powerpack: 15 kW

Year of construction: 2011, condition: used, Rated power: 5.5 kW Motor speed: 2930 rpm Max. operating pressure: 11 bar Dryer type: CT 8 Refrigerant: R134a Refrigerant charge: 0.260 kg Max. operating pressure (cooling system) HP 21 bar / LP 16 bar incl. Aquamat CF 3 oil-water separator Storage location: supplier Hedpfx Ahsxtnvkevei

Year of construction: 2015, condition: good (used), functionality: fully functional, Manufacturer Ryser GmbH Switzerland Type BAFAG ATU 15 Power 2 kW Hodpovz Svbsfx Ahvei

Condition: ready for operation (used), Year of construction: 2021, operating hours: 22,000 h, Dust-free & odorless – for clean production environments Compact & space-saving – fits into your facility as well. Robust & durable – stainless steel construction Flexible fuel options – natural gas, propane, or renewable gas (RNG) Low maintenance costs – for economical operation Energy efficient – only 700W thermal energy per liter of water Pyrolysis integration – possible production of charcoal pellets. 24/7 operation – thanks to a smart monitoring system with plant supervision Stainless steel construction (jumbogroup) Hsdeyidbaepfx Ahvei

Condition: used, Year of construction: 2009, We offer a CES LIN industrial cryogenic freezer from 2009. For rapid freezing using LIN (liquid nitrogen). The freezer is ideal for meat, poultry, fish, and bakery plants, as well as for the production of ready meals and convenience foods, where high-quality freezing, preservation of product structure, color, and weight, and minimal juice loss during thawing are important. The device is powered by 3×400 VAC + N + E (50 Hz), with a power of 10 kW, guaranteeing stable, industrial operation. The working chamber with internal dimensions of 2600 x 1100 x 1950 mm allows for the freezing of a wide range of products on trays, nets, in containers or on a conveyor belt, depending on the line configuration. The external dimensions of the freezer, 2850 x 2350 x 2300 mm, make it easy to install the device in an existing production hall. Control is carried out by a PLC system, which enables precise management of process parameters, and the LIN (liquid nitrogen) medium ensures very fast, gentle freezing while maintaining high product quality. Technical data: Manufacturer: CES Model: CES-BF-LIN-15x24x21-DSWF-E-PT-PLC Year of manufacture: 2009 Hsdsyia Shjpfx Ahvsi Type of device: LIN cryogenic freezer (liquid nitrogen) Medium: LIN – Liquid Nitrogen Installed power: 10 kW Power supply: 3×400 VAC + N + E, 50 Hz Weight: approx. 1800 kg Internal chamber dimensions (L x W x H): 2600 x 1100 x 1950 mm External dimensions (L x W x H): 2850 x 2350 x 2300 mm Control: PLC – programmable controller

Condition: excellent (used), Year of construction: 2011, MANUFACTURER: HANKINSON MODEL: HHDP2700 SERIAL NUMBER: 4001011004 YEAR: 2011 POWER (kW): 7 CAPACITY (m³/min): 45 PRESSURE (bar): 16 Hodpfxsyh Uvxs Ahvoi

Condition: excellent (used), MANUF. AGT TYPE VD8/18C PY S/N 7D8-02741 YEAR n/a POWER (kW) 7 OUTPUT (m³/min) 30 PRESSURE (bar) 16 HOURS (DOC/TOTAL) Hodpfxeyh Uq Ne Ahvei FREQUENCY INVERTER BUILT-IN DRYER R404a

Condition: ready for operation (used), Feed rate: 5-25m/min. Hodpfxjhkdube Ahvsi

Year of construction: 1988, condition: ready for operation (used), A powder tower system, a chimney and a burner for the food industry or the milk processing industry, in particular for the production and drying of milk powder or similar products, are available. 1) Tall form dryer SPX Flow APV, type II K, year of construction: 1988, water evaporation capacity: 1000kg/h, products: MPC 80/MPC 85/WPC 60/MCN 85. Components of the powder tower system: drying tower, two collecting cyclones with rotary conveyors, feed cyclone, buffer tanks, lift inlet preheater, homogenizer, vibration filter, control cabinet with frame construction and two atomizer and nozzle systems. 2) Steel chimney Fűtőker, year of construction: 2022, diameter 1/2: 800mm/600mm, height: 20500mm. 3) Weishaupt WM-G20/3-A burner, year of construction: 2014, documentation available. On-site inspection is possible. Hsdpfx Aevmq Tiohvsi

Condition: ready for operation (used), Two identical compressors with integrated refrigerated dryer are offered. Pressure dew point: +3°C, rated power: 30kW, delivery rate (FAD): 5.31m³/min at 8bar, 4.77m³/min at 10bar, 3.86m³/min at 13bar, control: Boge Autotronic, fully automatic operation. Inspection is possible by arrangement. Hjdpfx Ahjx I Rqpovji

Year of construction: 2005, condition: ready for operation (used), Drying capacity: 2x120W/cm, total drying capacity: 14000W, working width: 600mm, lamp type: 2x120W/cm, cooling: integrated, vacuum cassette: adjustable, conveyor belt speed: adjustable, machine dimensions X/Y/Z: approx. 3900mm/1200mm/1300mm, weight: approx. 700kg, operating hours: approx. 4400h. Including ozone extraction and a new measuring device UV-Integrator Full-UV with integrated heat shield and calibration certificate. 2 converters, 2 lamps and the belt have been replaced. Documentation available. On-site inspection is possible. Hjdpfxju Afz Rs Ahvji

Condition: ready for operation (used), Year of construction: 2007, Output: 144m³/h, operating pressure: 25.5bar, speed: 1500rpm, weight: 132kg. Hodotpct Njpfx Ahvji

Condition: ready for operation (used), Year of construction: 1999, A dryer Cremona is available. Sections: 6, temperature zones: 2, cooling section: 1, width: 4200mm. Production capacity: approx. 80 sheets/min. Documentation available. An on-site inspection is possible. Hjdpfx Asw I E Dpjhvji

Year of construction: 2014, condition: ready for operation (used), A Büchi laboratory spray dryer is available. Evaporation capacity: 1l/h, heating power: 2300W, max. inlet temperature: 220°C, air flow rate: 35m³/h, spray gas flow rate: 200l-800l/h, pressure: 5bar-8bar. Machine dimensions X/Y/Z: approx. 650mm/700mm/1100mm, weight: approx. 50kg. Documentation available. An on-site inspection is possible. Hjdexvrucspfx Ahvei

Condition: ready for operation (used), Rotary atomizer, nominal process gas flow rate: approx. 100 kg/h, water evaporation capacity: between 0.5 and 6 kg/h, inspection by appointment. Hedpfx Asv Edwrshvei

Year of construction: 2016, condition: ready for operation (used), A total of five (5) compact Helios granulate dryers with integrated conveying and control are available. Year of manufacture: 4x2016/1x2019, drying hopper volume: 30l, suction lance length: 810mm, drying capacity: approx. 6kg/h, max. drying temperature: 185°C. Machine dimensions X/Y/Z: approx. 420mm/420mm/625mm, weight: approx. 80kg, control: WINneo basic. Including conveying unit with dedusting and dust collection container with filter. Documentation available. An on site inspection is possible. Hsdeydp Abspfx Ahvoi

Year of construction: 2017, condition: refurbished (used), Dryer conveyor for digital direct-to-garment (DTG) printing: Asso 600 by Chiossi & Cavazzuti Hot air dryer for DTG printing good condition. Double belt conveyor. Year 2017. Textile oven almost new, overhauled and cleaned. Sold new for just over €12,000. Delivery not included - On request Characteristics of the Chiossi & Cavazzuti ASSO 600 drying tunnel: - MAX POWER: 9,5 KW - FIELD OF APPLICATION: Textile digital printing, pre-treatment drying for dark and light textiles, water-based digital ink drying. - DRYING SYSTEM: Warm air circulation - DRYING SURFACE: 2000 x 600 mm - MAX PRODUCTION: 180 pieces/h Possibility of offering a complete set with a DTG Brother, Epson, Kornit printer and a Schulze PretreatMaker IV pretreatment machine depending on availability. Hodpfx Ahoyh Rgyjvoi Electric Modular Dryer Forced Hot Air System Drying Area: 2000x600 mm Specifically designed to cure and dry digital printing on fabrics, the massive advantage of these dryers is the high volume of forced air circulation: this facilitates and accelerates the evaporation of water-based digital inks with unmatched results on the finished garment in medium-long drying process.

Year of construction: 2005, condition: ready for operation (used), The CKT 300 dry air dryer from Koch is available for sale as of 05/26. The customer is still using the unit. However, it is possible to inspect the machine on site. Hjdpfx Asyh I U Ushvsi

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, The CKT 110 dry air dryer from Koch will be available for sale from 05/26. The customer is still using the unit and it can be inspected on site. The vacuum loader is NOT for sale. The device has been serviced regularly by Koch, as evidenced by the inspection stamp! CKT 110 Dry air output: 110 m³/h Power: 10 kW Hjdoyh I S Hepfx Ahvsi