Used Frame Grinding Machine for sale (71,233)

Condition: excellent (used), Year of construction: 1989, Jung JF 520 Jung JF 520 surface grinding machine, manufactured in 1989 / 2019, mechanically overhauled, very good original condition. The machine comes from the technical department of a renowned German die-casting company. Technical data: Year of manufacture 1989 / 2019 Technical data Clamping area (L x W in mm) Hedpfxez Agz Rs Agtjnt 600 x 200 Oversize grinding area (L x W in mm) 600 x 250 Magnet size max. mm 500 x 200 Grinding wheel dimensions max. mm 225 (250) x 25 x 51 Distance table/spindle center mm Max. 400 Table longitudinal feed, oscillating m/min 1 – 20 Creep feed mm/min 0 – 500 Grinding spindle drive, speed rpm 800 – 4200 Power kW (with creep feed) 1.6 – 2.2 Machine weight approx.: 2.0 t Accessories and equipment: Magnet Coolant system Machine feet Grinding wheel About the machine: We offer a Jung JF 520 surface grinding machine, manufactured in 1989 / 2019, in very good condition. The machine is, of course, fully functional and has approximately 250 operating hours since its overhaul. All slides run very smoothly and evenly. Even at high speeds, the Jung runs very quietly. This newer generation of surface grinding machines is very user-friendly, and surfaces with a low Ra value can be produced. Take advantage of the opportunity to inspect this machine on site under power and see for yourself the condition of the machine. Video: Jung JF 520 You can find more surface grinding machines from well-known manufacturers on our website.

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, overall weight: 7,500 kg, grinding diameter: 300 mm, controller model: Siemens Sinumerik 840D Solutionline, No minimum price – guaranteed sale to the highest bidder! The control system was upgraded to a Siemens Sinumerik 840D Solutionline in 2014. The new control system was overhauled in 2016! TECHNICAL DETAILS Spindle speed range: 170–18,000 rpm Grinding diameter: 20–300 mm Swinging diameter: 350 mm (500 mm) Workpiece length: 300 mm (1,300 mm) Recommended grinding depth: up to 300 mm Center height above the workpiece table: 200 mm (300 mm) Center height above the grinding table: 330 mm (430 mm) Workpiece spindle bore: 50 mm (70 mm) Grinding table, Z-axis Total grinding table travel: 650 mm (950 mm) Resolution: 0.001 mm Rapid traverse: 12 m/min Grinding feed rate: 0–9.99 m/min Feed rate: 0–99.99 m/min Incremental feed value during reversal: 0–0.999 mm Grinding table, X-axis Total grinding table travel: 150 mm Resolution: 0.001 mm/rev Rapid traverse: 5 m/min/rev Grinding feed rate: 0–5 m/min/rev Feed rate: 0–99.99 mm/min/rev Incremental feed value during reversal: 0–0.999 mm/rev Hjdpfjzwmz Tjx Agtont Workpiece spindle head, B-axis Swivel range: −32° (−23°) to +2° Resolution: 0.0001° (0.36″) U-axis Total travel: 300 mm Resolution: 0.001 mm/rev Traverse speed: 5 m/min MACHINE DETAILS Control system: Siemens Sinumerik 840D Solutionline Machine weight: approx. 7.5 t Space requirement: approx. 5.00 × 4.00 × 2.20 m

Condition: new, Grinding machines for roller mills types CGJ-100, CGJ-120 Cutting length: 1030 mm, Casting frame, Motor:180W Hjdpfxjzqumko Agtent Manual lubrication pump

Condition: like new (used), Year of construction: 2022, functionality: fully functional, operating hours: 81 h, input voltage: 400 V, input frequency: 50 Hz, Equipment: CE marking, Available for sale is a NS LMD2500 2Z long belt grinding machine, built in 2022 and in as-new condition. The machine has only 81 operating hours. Hnodpoy Httqjfx Agtot Machine Details Manufacturer: NS Model: LMD2500 2Z Machine Type: Long Belt Grinding Machine Year of Manufacture: 2022 Operating Hours: 81 Condition: As New The machine is fully operational and available for inspection by appointment. If you have any questions or would like further information, please feel free to get in touch by message.

Condition: ready for operation (used), functionality: fully functional, Grinding length: 600 mm Hjdpoz Ayrvofx Agtent Grinding width: 250 mm Workpiece height: 450 mm Electromagnetic clamping table: 600 x 250 mm Grinding wheel diameter: 300 x 50 x 76.2 mm Spindle speed - stepless: 800 - 4200 rpm Total power requirement: 4 kW Machine weight: approx. 2.9 t

Condition: good (used), Year of construction: 1988, functionality: fully functional, 1 x Drill bit grinding machine Wedevag WL 2 Year of manufacture: 1988 with integrated dust extraction DCE Type: ADT 12 Technical data: Working range: 2.5 - 20 mm Grinding wheel dimensions: 203 x 10 x 32 mm Point angle: 60 to 180° Hnjdpfoz Agdxsx Agtst Rotational speed: 2,800 rpm Accessories: 13 x Clamping head 1 x Operating manual in German The machine can be inspected while powered on.

Condition: good (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 31.211.014, center height: 225 mm, grinding length: 1,000 mm, grinding wheel diameter: 400 mm, grinding diameter: 500 mm, workpiece diameter between centers: 500 mm, Equipment: rotational speed infinitely variable, Kellenberger UR 175x1000 CNC Kelco 70, fully functional Height increased from 175 to 225 (can be reversed) Machine no. 31.211.014, year of manufacture: 1987 Prepared for internal grinding attachment Accessories: 1x grinding wheel flange, left 1x grinding wheel flange, right Hnodpjyyur Ijfx Agtot 1x steady rest with various dressing tool holders 1x workpiece magnet 1x paper band filter No warranty, guarantee, or return Available immediately, ex works If required, transport can be arranged.

Condition: good (used), Year of construction: 1994, Grinding length max. 650 mm Grinding width 390 (max. 450) mm Distance from spindle center to table 600 mm max. Workpiece weight 350 kg Grinding area 650 x 390 mm Travel paths: X-axis 840 mm Y-axis 500 mm Z-axis 410 mm Total power requirement 15 kVA Machine weight approx. 3.0 t Space requirement approx. 4.0 x 3.0 x 2.5 m Hedpfx Ajvz A Stsgtsnt

Condition: ready for operation (used), Rotary table surface grinder ARTER A3 - 16 - Grinding diameter approx. 450mm Hnodpfx Ajzpfz Asgtot - Grinding height approx. 220mm - Workpiece weight approx. 250kg - Automatic feed - Coolant system - Machine enclosure - Work light Dimensions: L x W x H 2.5 x 1.5 x 1.7 meters / Weight approx. 3500kg Errors and omissions excepted.

Year of construction: 1971, condition: ready for operation (used), A Wotan internal roll grinding machine is available. Workpiece diameter: 1200mm, max. outside diameter: 1000mm, max. bore diameter: 900mm, travel X/Z: 370mm/800mm, swiveling: 15°, table travel: 500mm, grinding depth: 250mm, speed: 220rpm. Machine dimensions X/Y/Z: approx. 5000mm/3000mm/2200mm, weight: approx. 8500kg. Documentation vorhanden. An on-site inspection is possible. Hsdpfx Ajxyk S Uogtent

Condition: ready for operation (used), DELTA LC 400 – Rotary table grinding machine - Magnetic clamping plate (rotary table) 400 mm - Max. grinding diameter 400 mm - Grinding height (distance table - grinding wheel) approx. 230 mm - Spindle speed 2850 rpm Hnjdpfxeznvcbe Agtot - Fine feed 0.01 mm - Distance column - grinding wheel axis approx. 320 mm - Spindle motor 3 kW - Grinding wheel dimensions 200x80x78 mm - Lateral grinding wheel dressing device - Machine housing - Coolant system - Documentation Dimensions: L x W x H 1.2 x 0.8 x 1.8 meters / Weight approx. 700 kg Errors and omissions excepted.

Condition: used, OR71F grinding machine including base frame, year of manufacture 2022, 250 W, 66 kg Hodpfxovrvkwj Agtont Prices subject to change, errors, printing and typesetting errors reserved

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: C4656, grinding length: 4,100 mm, grinding width: 200 mm, Reform AR41 Type 7 C4656/91 Year of manufacture: 1991 Grinding length: 4100mm Grinding width: 200mm Workpiece height: 190mm Table clamping area: 4169x202mm Segment head diameter: 250mm Spindle diameter in the front. Bearing: 45mm Swivelling: 2° Max. torque: 2x45.8Nm 2x grinding motor 7.5kW Feed: 2000-35000 mm/min Hnodpfstqtppsx Agtst Max. speed: 1460 min/-1 Total power requirement: 30 kW Heidenhain digital display Additional grinding device ZS 7.5kW Swivelling clamping table via swivel gear Paper belt filter cleaning including pumps Central lubrication system Machine weight approx. 8.2t Space requirement approx. 9.5x2.6x2m

Condition: excellent (used), Year of construction: 2008, Table size 600 x 300 mm Max. grinding area 600 x 300 mm Dimensions of the grinding wheel 406 x 50 x 127 mm Min. / max. distance table / spindle center 500 mm Table speed, hydraulically adjustable 5 - 25 m/min. Crossfeed 0.1 – 20 mm Cross travel rate 900 mm/min. Handwheel, cross 1 revolution 5 mm 1 division mark 0.02 mm Automatic vertical feed 0.001 - 0.999 mm/cycle Handwheel, vertical 1 revolution 2 mm 1 division mark 0.01 mm With AD 5 (automatic feed) 0.005 mm Grinding wheel spindle speeds 1450 / 2900 rpm Grinding motor 1.5 / 3.7 kW Hodpjizka Ijfx Agtent Hydraulic pump motor 0.75 kW Drive motor, cross 1.1 kW Drive motor, vertical 1.1 kW Machine dimensions L x W x H approx. 2300 x 1800 x 2100 mm Weight 1700 kg Accessories / Special features: • 2-axis digital display • Automatic vertical feed with spark-out and subsequent lift • Electro-magnetic clamping plate L x W 600 x 300 mm • Manual grinding wheel dressing device • Grinding wheel speed, 2 stages • 1 piece grinding wheel with flange • Control panel • Lighting • Coolant system with belt filter and magnetic separator • Machine feet • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 11-153 D - 44143 Dortmund - Wambel

Condition: ready for operation (used), Year of construction: 1988, Horizontal surface grinding machine Okamoto Type PSG 63 – UAN Year of manufacture: 1988 Grinding length: 600 mm Grinding width: 320 mm Max. workpiece height: 500 mm Table travel (longitudinal): 750 mm Table travel (cross): 340 mm Grinding wheel diameter: 350 mm Grinding wheel width: 40 mm Spindle speed: 1500 rpm Rapid vertical feed: 400 mm/min Power: 3.7 kW Automatic feed Magnetic chuck Coolant system Hjdpozwub Ujfx Agtjnt Weight: 2500 kg Price: EUR 2,000—plus VAT, ex location

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: C210068/9002194, grinding length: 750 mm, grinding wheel diameter: 400 mm, total width: 2,750 mm, total length: 1,950 mm, total height: 1,750 mm, grinding diameter: 250 mm, Machine complete with filter unit and documentation. Grinding diameter (maximum workpiece Ø): 250 mm. Centre distance / maximum grinding length: 750 mm. Grinding wheel (max. size): 400 × 40 × 127 mm. Grinding spindle motor power: 5 kW. Grinding wheel speeds: approx. 2140 / 2640 rpm. Workpiece mounting: between centres, tailstock; suitable for external cylindrical grinding. Dimensions (L / W / H, approx.): 2750 mm / 1950 mm / 1750 mm. Machine weight: approx. 3.9 t (≈ 3900 kg). Hnedpoxz Tvxsfx Agtet

Condition: like new (used), Year of construction: 2019, Weight 6250 kg Size 5810 × 2545 × 2445 mm Design Table clamping area 1500 x 600 mm Hedpfovwdhhex Agtjnt Max. table load 1300 kg Longitudinal table movement 1600 mm Table groove (number/width) 3/ 16 mm Table feed 7 – 25 m/mm Min./Max. Distance spindle nose-table max. 600 mm Handwheel pitch vertical 0.002 mm Handwheel revolution vertical 0.5 mm Automatic grinding feed 0.002 – 0.02 mm Vertical rapid traverse (Y-axis) 230 mm/min Cross travel 660 mm Cross feed per stroke 0.1 – 12 mm Cross rapid traverse 1250 mm/min Handwheel pitch transverse 0.02 mm Handwheel revolution transverse 5 mm Grinding spindle motor 7.5 kW Grinding spindle speed 1450 rpm Grinding wheel 355 x 50 x 127 mm Hydraulic motor 3.7 kW

Condition: good (used), machine/vehicle number: 115 240, center height: 250 mm, grinding length: 1,000 mm, grinding diameter: 500 mm, a very well-maintained used external cylindrical grinding machine with internal grinding capability, SCHAUDT, Type: A 510 N 1000. Hnedpfxezz Tkco Agtst Center height: 250 mm, grinding diameter: 500 mm, grinding length: 1000 mm, with multiple grinding wheels.

Year of construction: 2009, operating hours: 11,720 h, condition: used, functionality: fully functional, machine/vehicle number: 2008/065, 1 thread grinding support, 1 water groove support, 7 face grinding supports, 3 upper chamfers, 3 lower chamfers, table extension console, belt running direction from right to left. Hodpfxew Exx As Agtjnt

Condition: good (used), functionality: fully functional, Mitutoyo length measuring system, model KA 12 (for longitudinal and transverse movement) Retrofitting with a CNC control system for the draw-in device, including air conditioning unit, Center distance: 630 mm, the machine has no tailstock and was specifically used for chucking operations, Max. grinding diameter: 280 mm, Max. grinding wheel size: 400 x 40 x 127 mm (not included in the scope of supply), Grinding spindle speed: 2040 rpm, 6 speed stages of the tool spindle: 22.4 to 280 rpm, Drive motor: 4 kW, Hnodpfxezv Uhrj Agtst Accuracy / smallest division value: 0.001 mm, Taper in tailstock and tool spindle: Morse 4 Largest table longitudinal travel: 760 mm, Weight between centers: 120 kg, Total power consumption: approx. 9.3 kW, Machine weight: approx. 2600 kg, Machine dimensions: L 3075 x W 1650 x H 1500 mm Year of manufacture: corresponds to the serial number: 1989 - 1991 Swiveling headstock (± 90°) and grinding head (± 45°), Hydraulic table movement and automatic feed, Cooling system, Machine lighting, Operating manual in German and electrical diagrams.

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 146978, Knuth Surface Grinding Machine Flat HFS 2500C Working Area & Capacities Table dimensions: 250 x 500 mm Grinding area (max.): approx. 500 x 250 mm Maximum workpiece weight: 180 kg Distance spindle center to table surface: 450 mm Travel Distances & Feeds Longitudinal travel (X-axis): 560 mm Cross travel (Y-axis): 275 mm Hydraulic table feed (X): 7 – 23 m/min Rapid traverse cross (Y): 990 mm/min Rapid traverse vertical (Z): 460 mm/min Spindle & Grinding Wheel Grinding spindle motor power: 2.2 kW Hnjdey H Dg Ijpfx Agtjt Grinding wheel dimensions: 200 x 20 x 31.75 mm Graduation: Y-axis 0.02 mm / Z-axis 0.005 mm Dimensions & Weight Machine dimensions (LxWxH): approx. 2650 x 2150 x 1675 mm Total weight: approx. 1800 kg

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 34.0 m/s total power requirement 3.0 kW weight of the machine ca. 75.0 kg dimensions of the machine ca. 570 x 570 x 1150 mm Description: - Excellent grinding performance thanks to high belt speed - Quick adjustment for horizontal and inclined positions - Continuous surface grinding area for optimal grinding of long workpieces - Versatile for grinding edges, surfaces, and for cylindrical grinding - Includes a quick-clamping system for fast belt changes - Easy adjustment of parallel belt alignment using an adjustment screw - Graphite coating on the flat grinding surface improves the sliding properties of the abrasive belt Scope of delivery: - Sanding belt - Hinged protective shield Hedpfxez Auico Agtent - Sanding and support table - Workpiece stop - Emergency stop button - Machine base - Operatorâ??s manual (ENG)

Condition: new, width of the strips 150 mm band length 2000 mm band speed 34.0 m/s total power requirement 3.0 kW weight of the machine ca. 95.0 kg dimensions of the machine ca. 650 x 650 x 1150 mm Description: - Excellent grinding performance thanks to high belt speed - Quick adjustment for horizontal and inclined positions - Continuous flat grinding surface for optimal grinding of long workpieces - Versatile for grinding edges, surfaces, and for cylindrical grinding - Includes a quick-clamping system for fast belt changes - Easy adjustment of parallel belt alignment using an adjustment screw - Graphite coating on the flat grinding surface improves the sliding properties of the grinding belt Scope of delivery: - Sanding belt - Hinged protective shield - Sanding and support table - Workpiece stop - Emergency stop button - Machine base - Operatorâ??s manual (ENG) Hodpfoz Auiiex Agtent

Condition: not inspected (used), Year of construction: 1987, functionality: unexamined, machine/vehicle number: 20119, We offer this Studer S35 cylindrical grinding machine, ready for use, manufactured in 1987. Manufacturer: Studer Model: S35 Year of manufacture: 1987 Condition: ready for use Category: 1373 Hedozvvzyopfx Agtont Type: cylindrical grinding machine If you have any further questions or require additional information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2017, Hydraulic flat grinding machine, Bernardo BSG 2040 TDC, used 🧰 Product features • Manufacturer: Bernado • Model: BSG 2040 TDC • Condition: Used, see photos • Color: blue-white • Year of manufacture: 06.2017 • Rated load capacity: 3500 kg • Weight: 1650 kg • Voltage: 400V 💰 Price: €5,900,- net, excluding VAT • Quantity discount: available upon request • Private sale: No minimum order quantity • Shipping costs: available throughout Europe upon request Hnedpfxozzdf Dj Agtst • Delivery time: Immediately available • Inspection and collection: possible at any time by appointment We constantly have over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our general terms and conditions, all prices excluding VAT, ex warehouse.)