Used Foil Container Machine for sale (68,806)

Condition: excellent (used), Year of construction: 2016, operating hours: 16,000 h, functionality: fully functional, nominal power (apparent): 11 kVA, controller manufacturer: haas, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, spindle motor power: 11 W, number of spindles: 1, number of slots in tool magazine: 21, Equipment: chip conveyor, Here is the complete reference sheet combining the Haas DT-1 machine specifications, probing package, and 5-axis setup in metric units. 2016. Located in Israel Transport cost to Erope 8000 Euro under power Machine Travels & Work Envelope X-Axis Travel: 508 mm Rcedpfxezwxz Ej Ahcef Y-Axis Travel: 406 mm Z-Axis Travel: 394 mm Spindle Nose to Table Top: 152 mm – 546 mm Worktable Table Size (L x W): 660 mm x 381 mm Max Weight on Table: 113.4 kg T-Slot Width: 15.9 mm – 16.0 mm T-Slot Center Distance: 125 mm (3 standard slots) Spindle Specs Spindle Taper: BT30 Max Speed: 10,000 RPM ATC 20+1 5-Axis Setup (TRT100 Dual-Axis Rotary Table) Rotary Unit: TRT100 dual-axis tilting trunnion (mounted on the table). Platter Diameter: 100 mm Max Part Swing: 213 mm Weight Capacity on Platter: 6.8 kg (3+2 positioning) / 2.3 kg (simultaneous 5-axis) Travel: A-axis (Tilt) ±120°, C-axis (Rotation) 360° continuous Indexing Speeds: 1,000 deg/sec on both axes Control Requirements: 4th & 5th-axis drive options installed on the machine control. Key Software Features: Supports 3+2 indexing and continuous 5-axis simultaneous machining. DWO/TCPC (Dynamic Work Offsets / Tool Center Point Control): Manages work offsets automatically as part angles tilt/rotate, eliminating the need to re-post programs when mounting locations change. Working Clearance: The TRT100 unit consumes ~230 mm of vertical space, leaving a tight Z-axis machining clearance window (~160 mm) inside the machine's 394 mm total Z-travel. Probing & Tool Measurement (WIPS-R / Renishaw) Hardware Package: Workpiece Spindle Probe: Renishaw OMP40-2 (BT30 optical touch probe) Tool Setter Probe: Renishaw OTS (Table-mounted optical tool setter) Receiver: Renishaw OMI-2T (Modulated optical transmission) Tool Setter Functions: Automatic tool length offset setting, rotating tool diameter offset calibration, and in-cycle tool breakage detection. Workpiece Probe Functions: Work Coordinate System (G54–G59) setting, feature inspection (bores/bosses/surfaces), and part alignment skew angle calculation.

Condition: used, Year of construction: 2000, Overview  The swing top closing machine was built in 2000 by the German manufacturer Kleindienst. The machine was continuously maintained and is already dismantled and stored. Technical data  Rcodpfx Ahowkq Iaecef - Capacity: 18,000 bottles/h  - Number of closing heads: 24 - Formats: - 0,5 l Bügel Lochmund - 0,33 l Bügel Kropfhals  - Working direction: clockwise

Condition: excellent (used), container length: 10 ft, Equipment: cooling unit, Used, insulated 10 ft container (refrigerated container) Redpfxszwq Htj Ahcscf Aluminum exterior cladding of the sandwich panels with air conditioning unit Manufacturer: DANTHERM Model: Flexibox 900 Outdoor Year of manufacture: 10/2023 I was unable to test the air conditioning unit. The plug-in control unit is missing. External dimensions of the container: Length: approx. 303 cm (plus approx. 50 cm for air conditioning unit) Width: approx. 243 cm Height: approx. 270 cm Internal dimensions of the container: Length: approx. 286 cm Width: approx. 243 cm Height: approx. 245 cm with crane lifting points Weight: approx. 1800 kg According to the data sheet, the container is also suitable as an external load for transport by helicopter. With data sheets/documentation! The container can be loaded onto a suitable vehicle in my warehouse!

Condition: used, Year of construction: 2025, color: grey-black, empty load weight: 3 kg, first registration: 09/2025, fuel type: gasoline, gearing type: mechanical, TITLE: USED OPEN-TOP ROLL-OFF CONTAINER FOR BULKY WASTE WITH REAR OPENING AND TWO SWING DOORS, 200 MM BEAMS, FLOOR TO BE REPAIRED REF: 25-U-121 TYPE: bulky waste NEW: no LID: no OPENING: rear, two swing doors OVERALL DIMENSIONS TOTAL EXTERNAL LENGTH: 7.00 m + 0.20 m EXTERNAL BOX WIDTH: 2.50 m FRONT SIDE INTERNAL / EXTERNAL HEIGHT: 2.20 m / 2.40 m REAR SIDE INTERNAL / EXTERNAL HEIGHT: 2.20 m / 2.40 m SIDE PANEL INTERNAL / EXTERNAL HEIGHT: 2.20 m / 2.40 m CAPACITY: 36 m³ WEIGHT: 2,780 KG FLOOR THICKNESS: 3 mm WALL THICKNESS: 3 mm COLOUR: blue Except for errors and/or omissions. The prices shown do not include VAT. Please contact the sales department for an updated comparison of prices and conditions. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the field of selling and purchasing industrial and commercial vehicles, specializing mainly in the waste sector. Specialists in trucks, trailers, and roll-off equipment. With an available fleet of over 50 trucks and more than 150 containers, roll-off bins with and without cranes. Rjdpjxqicgefx Ahcocf E.&O.E. Due to the quantity of advertisements and details provided, Aurora kindly invites you to verify the accuracy of the data listed with our sales staff.

Condition: used, axle configuration: 3 axles, first registration: 03/2018, color: other, Year of construction: 2018, Empty weight: 5.700 kg Axle 1: left 6 mm right 6 mm Axle 2: left 6 mm right 6 mm Axle 3: left 6 mm right 6 mm Rsdpezw Awksfx Ahcecf We have the possibility to stack trailers!

Condition: excellent (used), Year of construction: 1992, Belt dimensions: 2600 x 150 mm Sanding belt motor power: 2.2 kW Operating voltage: 3 x 400 V + PE / 50 Hz Rcsdett Da Dopfx Ahcjf Sanding table height-adjustable via handwheel Table size: 975 x 340 mm Height-adjustable sanding table for radii; size: 400 x 200 mm Sanding beam can be swiveled 90 ° - 0 ° Suction connection Ø 120 mm CE Space requirement (L x W): approx. 1600 x 725 mm Weight: approx. 320 kg Note for used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: new, Wide belt sanding machine for calibrating and fine sanding Working width mm 1,100 Min/ Max. working height mm 4/ 170 Sanding belt width mm 1,115 Sanding belt length mm 2,150 Gear motor kW 2.2 Feed speed m/min variable Rodjitvkujpfx Ahcjcf Infeed and outfeed support rollers for long and short workpieces Oscillating belt cleaning 1st unit Oscillating belt cleaning 2nd unit Oscillating belt cleaning 3rd aggregate 10” touch screen control panel “eye-S” 1. Aggregate steel roller 2. Aggregate rubberized calibrating roller 85SH 3. Aggregate combi-aggregate pneumatic seg. sanding pad /rubberized sanding roller 35 SH Motore power 1st unit kW 18.5 Motor powert 2nd & 3rd aggregate kW 18.5 Version "B" for RRCS with: Pneumatic switching on and off 1st aggregate Pneumatic switching on and off 2nd aggregate Pneumatic switching on and off 3rd aggregate "MESAR" with elastic segmented sanding pad Pneumatic switching on and off of the sanding pad unit electronic adjustment of the working height SPECIAL PRICE! IMMEDIATELY AVAILABLE

Condition: as good as new (ex-display), Year of construction: 2019, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 600 mm, type of input current: AC, input voltage: 220 V, Zeiss CONTURA CMM ( As good as NEW ) !!! Quick sale price Rcedpfjzwuk Asx Ahcjf

Condition: used, empty load weight: 7,300 kg, maximum load weight: 37,700 kg, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 03/2019, suspension: air, tire size: 235/75R17,5 --/140J, color: other, gearing type: other, front tire size: 235/75R17,5 --/140J, rear tire size: 235/75R17,5 --/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Reinforced design, length of high bed approx. 4,180 mm, length of low bed approx. 9,400 mm, loading height approx. 900 mm, 12 x stake pockets in the outer frame, 3 x cross stake strips, 14 x lashing eyes, 4 pairs of container locks for, 2 x 20 ft. ISO containers or 1 x 40 ft ISO container, , --  Misprints, errors and changes reserved, sample images --, More data at: !, More Details: ! Rcedpfxszw Agfs Ahcof

Condition: new, Year of construction: 2022, functionality: fully functional, The price is for all together. Ideal for a new start on Screen Printing Art studio Artists The set contains: 1.SCREEN PRINTING CAROUSELL type X 4 TABLES, FULL AJUSTABLE 2. DRYIER: 3FACE POWER 3.FLASH AUTO: 3FACE POWER Rcjdpfsxwnw Asx Ahcef 4. 2 SET OF RACK DRYIERS ALL ARE NEW , OUT OF THEIR BOXES.

Condition: reconditioned (used), Mortising machine, swing chisel mortising machine MAKA type DB 5 Redpfev Hm Nmsx Ahcjcf with many mortising tools, see pictures Workpiece stop 2 pieces Stop rail right / left 2150 mm Workpiece blow-out 2x Foot switch Pneumatic workpiece clamping on the side 1 piece Pneumatic workpiece clamping from above 2 pieces Extraction connection D 120 mm Weight approx. 550 kg Dimensions approx. L x W x H = 1200 mm x 800 mm x 1500 mm (without stop rails) Note on used machines: • Errors in technical information and prior sale reserved. • Prices stated are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Condition: good (used), Year of construction: 1992, Single-piece sanding machine Rcodpfswyda Uex Ahcjf sanding from top and bottom electric height adjustment with digital display continuously variable feed speed star/delta starter pneumatic belt tensioning main switch sanding belt oscillation finishing brush unit top and bottom, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Incl. infeed and outfeed roller conveyor (L = 1600 mm, non-driven) Note on used machines: • Technical data subject to errors and prior sale. • Quoted prices are ex-works – loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as inspected, with no claims to warranty. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (We answer inquiries only when your address and telephone number are provided!)

Condition: excellent (used), Deckel Maho DMC 835V CNC machining center Year of manufacture: 2008 Control system: Siemens 840D with Shopmill Travel range X/Y/Z: 835 mm / 510 mm / 510 mm Spindle speed: 10,000 rpm Spindle power: 14 kW Table dimensions X/Y: 1000 mm / 560 mm Rcedpfozw Auvsx Ahcjf Table load capacity: 800 kg max. Workpiece height: 720 mm Tool positions: 20 Tool holder: SK40 Weight: approx. 4500 kg Operating hours: 9521 h Chip conveyor Handwheel

Condition: used, Year of construction: 2008, functionality: fully functional, input frequency: 50 Hz, type of input current: AC, input voltage: 400 V, pressure: 6 bar, 8-disc glass grinding and polishing machine. In excellent working condition! 8 discs Glass thickness 3 - 35 mm Min. glass size 40X40 mm Speed ​​0.5 - 5m/min. Power: 19.5kW Rcjdpfx Aozn Nriehcjf Power supply: 400V The machine is in excellent technical condition, can be viewed, tested, and purchased at a pre-arranged time.

Condition: used, Year of construction: 2015, functionality: fully functional, workpiece height (max.): 60 mm, total length: 7,920 mm, warranty duration: 3 months, HOLZ-HER Edge Banding Machine ACCURA 1556 premium with intelligent equipment package for edge thicknesses up to 15 mm. Easy program changes and tool adjustments via the 18.5" touch control panel. Rcedpjx Emf Dofx Ahcjf Short heating time of the GlueJet adhesive system, approximately 2 to 3 minutes depending on adhesive type and ambient temperature. Always fresh glue thanks to the GlueJet adhesive application system and glue cartridges. Changing PUR glue and cleaning the system is extremely simple and can be done in just a few minutes. Axis adjustment via high-precision, repeatable servo motors. Special features for materials with protective foil, such as high-gloss and supermatt surfaces! One of the absolute highlights of this machine is the multifunction package, which excels in operations with many different edge types. The DIA tools are multi-stage and can switch between radii and bevels as the situation demands – from the longitudinal milling unit to corner copying and profile scraper. The extendable workpiece support and extended infeed section help with large workpieces, and a guiding system assists in feeding small workpieces into the machine. Edge thickness (coil material): 0.4 – 3 mm (depending on material) Edge thickness (strip material): 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Workpiece width: min. 65 mm Feed speed: 10 – 25 m/min Glue application via GlueJet, suitable for both EVA and PUR adhesives, with minimal effort. Handles all popular edge types, including high-gloss & supermatt, as well as solid wood edges up to 15 mm. iTronic – pressure and glue amount control Prepared for connection to a RETURN system Motorized pressure bridge with top belt drive Multifunction units for quick setup of radius, flush, bevel Vertical & horizontal spray units and much more. Delivery, installation, and machine commissioning can be arranged directly through us at an additional cost. The machine is currently located in our delivery warehouse in Gratwein, Austria. In the event of discrepancies between the German version and any foreign-language version, only the German version is binding. Our general terms and conditions can be found on our website at holzher.de/de/agb.

Condition: good (used), Polar Mohr 78 X Paper Cutting Guillotine Machine has been serviced and is ready to use, in perfect condition. Manufactured in 2008. Technical specifications: Cutting width: 780mm Stack height: 120mm 15″ LCD display 400V power supply Weight: 1400kg Enlarged side tables Chrome table surface Table lighting and optical cutting line Rodpozw Tyvjfx Ahcjcf Continuously adjustable clamping force Additional rear table guards. Spare knife, cutting sticks, tapping block, and operating tools.

Condition: used, functionality: fully functional, machine/vehicle number: 45310016, Year of construction: 2014, operating hours: 11,001 h, load capacity: 45,000 kg, lifting height: 15,077 mm, fuel type: diesel, mast type: telescopic, construction height: 4,780 mm, power: 265 kW (360.30 HP), empty load weight: 75,500 kg, total length: 11,258 mm, drive type: Diesel, construction width: 4,190 mm, Full container reach stacker Chassis number: 45310016 Mast type: Telescopic Transmission: Dana Spicer Clark 15.5HR 36.000 Condition: Ready for operation and fully functional Rcodpszw R A Usfx Ahcof Technical condition: good Front tire type: Pneumatic Front tire size: 18.00-25 Front tire condition: 40 - 60% Rear tire type: Pneumatic Rear tire size: 18.00-25 Rear tire condition: 40 - 60% Description: good running and working condition Side shifter Rear work lights, front work lights, full cab movable cabin, 30´ stop, pile slope, movable counterweight, air conditioning, extra heating, camera with monitor, central lubrication, surround view system

Condition: used, Year of construction: 2001, functionality: fully functional, OKAMOTO ACC 64 DX Surface Grinding Machine Year: 2001 TBC Servo Automatic Downfeed 600 x 400.0mm WALKER HAGOU MAGNET Rcsdpfx Ahjzv Ef Ujcof Electromagnetic chuck Paper coolant filtration system

Condition: used, axle configuration: 3 axles, first registration: 08/1995, color: other, Year of construction: 1995, Empty weight: 5.600 kg Axle 1: left 3 mm right 5 mm Axle 2: left 4 mm right 4 mm Axle 3: left 5 mm right 5 mm Redpfx Aozw Evpehcscf We have the possibility to stack trailers!

Condition: excellent (used), Year of construction: 2007, Edge thickness 0.2 - 12 mm Workpiece thickness 8 - 52 mm Rcedpfslc Ewiex Ahcof Workpiece width min. 70 mm Workpiece length min. 150 mm Automatic edge magazine milling unit 2 x 1.5 kW, application-controlled Cut-off unit 2 x 0.3 kW Flush trimming unit 2 x 0.7 kW, scanning on one side Fine trimming unit 2 x 0.35 kW, tiltable 15/ 30/ 45 degrees Fine trimming unit 2 x 0.3 kW, R=2, scanning on both sides Corner copying unit 2 x 0.3 kW Scraper unit, autom. in/ out Flat scraper unit Buffing unit 2 x 0.2 kW, oscillating 5 x spray device (2 x release agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed 10 - 14 m/min COMBI MELT gluing part for EVA/ PUR, volume 1.5 l CE mark Total connection 12.6 kW Dimensions L x W x H approx. = 6120 x 840 x 1500 mm Weight approx. 2,900 kg

Condition: new, Stable steel-cast iron construction High-precision format sliding carriage made of anodized aluminum with a travel distance of 2250 mm Maximum saw blade diameter of 315 mm, saw blade adjustable by 45° Large fence frame (960 x 600 mm) with an extendable aluminum telescope stop up to 2660 mm Heavily ribbed planer worktables made of cast iron, annealed and stress-relieved for decades of stability and flatness Helical steel infeed roller for uniform material feed Three milling speeds, manually adjustable Milling spindle with clockwise/counterclockwise rotation Three independent industrial motors With lockable main switch, motor protection switch, emergency stop switch Planer table width 410 mm Planer table length 1810 mm Rcedsiiynnepfx Ahcjf Maximum chip removal 4 mm Thickness table length 605 mm Thickness table width 410 mm Working height min. 3 mm Working height max. 230 mm Feed rate 7 m/min Maximum chip removal 4 mm Dust extraction port diameter 4 x 120 mm Planer cutterhead type TERSA (3 pcs) Planer cutterhead diameter 72 mm Speed 5200 min⁻¹ Circular saw fence length 2250 mm Cutting width with parallel fence 900 mm Max. crosscut width to the left of the saw blade 2310 mm Saw blade tilt 90 – 45 ° Max. cutting height at 90° 90 mm Max. cutting height at 45° 63 mm Saw blade diameter 315 mm Saw blade speed 4000 min⁻¹ Sliding carriage and table Format sliding carriage length 2600 mm Spindle diameter 30 mm Speeds 3500/7000/10000 min⁻¹ Milling tool diameter max. adjustable/non-adjustable 180/210 mm Power of drive motor 3 x 5.0 kW, 400 V, 50 Hz Machine weight approx. 560 kg INCLUDED OPTIONS - Handwheel with gravity-assisted numerical display for thickness table positioning - Sliding carriage length 2600 mm - Professional fences - "TERSA" planer cutterhead - Clockwise/counterclockwise rotation of the milling cutter

Condition: used, MIG/MAG pulsed gas shielded welding machine FRONIUS, Type TransPulsSynergic - TPS 330 Art. No.: 4.075 Serial No.: Year of manufacture approx. 2000 Power: 330 amps = 50% duty cycle 300 amps = 60% duty cycle 210 amps = 100% duty cycle Adjustment range: stepless Open-circuit voltage: approx. 50 volts Open-circuit voltage: approx. 30 volts Mains connection: 400 volts, 50 Hz, 32 amps, plug - Digital display for voltage and current - Pulse function - Various welding programs can be selected Welding processes: MIG/MAG/TIG (program and manual operation) 2-cycle, 4-cycle, 4-cycle special and spot welding - Separate 4-roller wire feeder FRONIUS, Type VR 152, with connecting hose package approx. 1.5 meters - 4 meter hose package NEW, with central connection FRONIUS - External FRONIUS water cooling unit, Type FK 71 - Welding gas pressure regulator NEW - Welding machine equipped with 1.2 mm welding wire Space requirement L x W x H: 900 x 660 x 1550 mm Weight: approx. 160 kg Good condition - fully functional - ready for demonstration Rjdsyxy Tbopfx Ahcecf The unit is also suitable for TIG and electrode welding. Additional equipment for TIG and electrode welding is not included in the scope of supply.

Condition: new, Year of construction: 2026, color: grey, overall weight: 15,000 kg, maximum load weight: 12,690 kg, empty load weight: 2,310 kg, loading space volume: 20 m³, loading space width: 2,380 mm, loading space length: 6,000 mm, loading space height: 1,400 mm, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel superstructure, doors. Rcedozbm I Njpfx Ahcef Superstructure: Roll-off container with double-wing door, approx. 20 m³, roll-off container with double-wing door, approx. 20 m³, ARCHIVE IMAGES! Roll-off container according to DIN 30722-1, external rollers greaseable, floor 5 mm, walls made of 3 mm steel, spar spacing 750 mm, double-wing doors with reinforcement and Dutch door lock, all-round tarpaulin and net hooks, galvanized ladder rungs according to UVV on the front, RAL 7016! with 2 lashing eyes on the front wall and 4 lashing eyes per side! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: new, Year of construction: 2026, color: grey, overall weight: 15,000 kg, maximum load weight: 12,690 kg, empty load weight: 2,310 kg, loading space volume: 20 m³, loading space width: 2,380 mm, loading space length: 6,000 mm, loading space height: 1,400 mm, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, doors Body: Roll-off container with double-wing door, approx. 20m³, ARCHIVE IMAGES! Roll-off container according to DIN 30722-1, external rollers greaseable, floor 5mm, walls made of 3mm steel, spar spacing 750 mm, double-wing door with reinforcement and Dutch door latch, all-round tarpaulin and net hooks, galvanized ladder rungs according to UVV on the front, RAL 7016! with 2 lashing eyes on the front wall and 4 lashing eyes per side. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Rsdpfezbm Ngsx Ahcecf

Condition: new, Year of construction: 2026, color: grey, overall weight: 15,000 kg, maximum load weight: 12,050 kg, empty load weight: 2,950 kg, loading space volume: 36 m³, loading space width: 2,300 mm, loading space length: 6,500 mm, loading space height: 2,400 mm, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, doors. Body: Roll-off container with double-leaf door, approx. 36 m³, with lashing eyes. ARCHIVE IMAGES. Standard roll-off container, external rollers greaseable and replaceable, floor 5 mm, walls made of 3 mm steel, stringers 750, double-leaf doors with reinforcement and Dutch door closure, all-around tarpaulin and net hooks, galvanized ladder rungs according to UVV regulations on the front, warning markings, RAL 7016 anthracite gray, with 2 lashing eyes on the front wall and 4 lashing eyes on each side! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Redozbm Ntepfx Ahcocf