Used Foam Cutting Machine for sale (67,767)

Condition: new, CATALOGUE NUMBER RE060 - New machine TECHNICAL SPECIFICATIONS - Saw blade diameter ⌀250 – 350/30 mm - Scoring blade diameter (works only with blades ⌀300, 350 mm) ⌀120/20 mm - Main motor power 4 kW - Scoring motor power 0.75 kW - Spindle speed 4000 rpm - Scoring spindle speed 8800 rpm - Blade tilting 0 – 45° - Max. cutting length 1600 mm - Rip fence cutting width 1250 mm - Riving knife ⌀350 mm - Spindle flange diameter 87.5 mm - Table fence set at 90° – 45° angle, accuracy ±1° - Max. cutting height with blade ⌀300 mm: 95 mm - Max. cutting height with blade ⌀350 mm: 120 mm - Upper dust extraction port diameter ⌀80 mm - Lower dust extraction port diameter ⌀100 mm - Weight 480 kg - Machine dimensions (folded) 2020x3380x1200mm Net price: 16000 PLN Ibsdpfx Apszrk N Rocsb Net price: 3800 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (Price may change with larger exchange rate fluctuations)

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 06-13796, Technical characteristics: Work Area - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse displacement of the column: ±20 mm - External diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece - Maximum nominal module (in steel with a tensile strength of approximately 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm - Maximum external diameter (internal gearing): 280 mm - Maximum width of the toothed band: 42 mm - Maximum stroke length for tooth cutting: 50 mm - Maximum spindle travel: 70 mm Load Capacity - Maximum load on the table (including fixtures): 150 kg - Maximum force applied by the tailstock: 1,500 kg - Maximum achievable helix angle (hydrostatic guide): approx. 45° Cutter Spindle - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment - Operating voltage: 400 - 480 V, Control voltage: 24 V, Magnetic voltage: 24 V, Cable cross-section: 16 mm² - Connected power: 15 kW, Protection: 50 A Dimensions - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical design: Ensures optimal chip evacuation and easy loading/unloading. - Control: Siemens Sinumerik 810D/840D - High Precision: Positioning accuracy by Heidenhain linear scales - Measuring system: Marposs T25 (for angular alignment or zero-point rotation definition) - Oil filtration and cooling system - Magnetic chip extraction conveyor Ibsdpfexwl N Asx Apcjb

Year of construction: 2026, condition: like new (used), functionality: fully functional, Sandt 530 CE bridge cutting machine Hydraulic press with a movable ram (front/rear) designed for cutting various types of materials from a die (leather, foam, cork, etc.). Very fast and powerful – during operation, the machine works autonomously (only the tool and the material being cut require attention). Technical specifications: Iodpfx Aozf N A Aepcebb Strong pressing force: 30T Working area: 100cm x 50cm Maximum stroke: 150mm Maximum clearance between ram and table: 177mm The machine is equipped with a clear, 3-language touchscreen panel (Polish, English, German) with the following functions: - Tool "0" point reading - Force adjustment - Table height adjustment after cutting - Automatic/manual operation - Cycle counter - Machine error diagnostics The machine is in perfect technical condition after a complete overhaul, which included: - Replacement of all seals - Replacement of all bearings and rollers - Inspection of the hydraulic and mechanical systems - Completely redesigned and manufactured machine electrical system, including safety barriers, safety relays, and a PLC panel - Painting and maintenance We provide the original manufacturer's documentation, a wiring diagram for the new electrical installation, and a CE declaration for the machine. Price on request. Assistance with transport arrangement is available. For more information:

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 80 mm, sheet thickness aluminum (max.): 50 mm, input voltage: 400 V, total length: 13,000 mm, cutting current: 300 A, travel distance X-axis: 2,500 mm, travel distance Y-axis: 12,000 mm, type of cooling: water, Here is the sales listing translated into professional English: For Sale: Teknohaus Thermcut 4500 P Gantry Cutting Machine (Bevel Plasma & Oxy-Fuel) For sale: A modern, industrial-grade Teknohaus Thermcut 4500 P gantry cutting machine, manufactured in 2021. This system combines high-precision Hypertherm XPR300 bevel plasma technology with IHT Automation oxy-fuel cutting, offering a versatile range of cutting capabilities from thin sheet metal to heavy plate cutting and beveling. Key Specifications Manufacturer: Suomen Teknohaus Oy Model: Thermcut 4500 P Year of Manufacture: 2021 Supply Voltage: 3 x 400 V Dimensions & Capability Cutting Area / Table Size: 2,500 mm x 1,200 mm Bevel Plasma Capability: Enables direct cutting of weld preparation bevels (e.g., V, X, Y, and K bevels) directly from the plate. Equipment & Features Plasma Power Source: Hypertherm XPR300 (X-Definition technology, 300 A) Oxy-Fuel Cutting: IHT Automation / GCE FIT+ torches with dedicated gas control panel (Preheat / Propane / Cutting / O₂) Control System: Modern CNC control unit with touchscreen and physical controls Safety Features: Emergency pull-wire safety system along the table sides and comprehensive safety labeling Ibsdpfxjzy I S Ej Apceb Cutting Capacity (Hypertherm XPR300) Mild Steel: Piercing up to 50 mm (Argon-Assist), Severance up to 80 mm Stainless Steel & Aluminum: Piercing up to 38 mm / Severance 50–75 mm The machine is in excellent working condition and has been well-maintained in an industrial production environment.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 55,771 h, laser hours: 35,157 h, laser power: 3,200 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 8 mm, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 150 mm, positioning speed: 140 m/min, positioning accuracy: 0.02 mm, year of last overhaul: 2025, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 150 mm, Equipment: centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, The laser was fully functional and in very good technical condition until its professional dismantling. The machine was regularly serviced by an authorized service provider, and a complete service history is available. In 2025, all mirrors were completely replaced. The dismantling and professional disconnection of the machine were carried out by an authorized service provider. The machine is currently safely stored in a dry warehouse and is ready for shipment. Videos of the machine in operation are available. Iodev Hxbbopfx Apcsbb

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, operating hours: 36,000 h, laser source manufacturer: TRUMPF, laser power: 4 W, overall weight: 13,140 kg, total length: 9,300 mm, total width: 4,600 mm, Manufacturer: TRUMPF Type: TRUMATIC L 3030 Year of manufacture: 2008 Ibjdpfx Ajzy Huxopceb Table dimensions: 3000 x 1500 x 115 mm Power: 4000 Watts Control system: Siemens Sinumerik 840 D Max. thickness of sheet metal that can be cut / steel: 20 mm Max. thickness of sheet metal that can be cut / stainless steel: 15 mm Max. thickness of sheet metal that can be cut / aluminum: 10 mm Max. cutting speed: 60/85 m/min Accuracy: +/- 0.1 mm Length: 9,300 mm Width: 4,600 mm Height: 2,000 mm Weight: 13,140 kg

Condition: good (used), Polar Mohr 115 XT Plus Paper Guillotine This machine is in very good condition, ready for production, and has been serviced. Low mileage. Year of manufacture: 2011. This is the most valued guillotine brand, a flagship product. Technical specifications: Cutting width: 1150mm Stack height: 165mm Programmer with 18.5″ color touchscreen display Air table Photocells Ibodpfezw T Dnox Apceb Chrome table surface Ball screw drive for the rear comb Optical cutting line Enlarged side tables Knife change via the control panel Additional rear table guards Weight: 3200kg 380V power supply Includes documentation, a tool kit, a tapping block, a spare knife, and one knife in the machine.

Condition: good (used), functionality: fully functional, Year of construction: 2016, laser power: 3,000 W, TruLaser Tube 5000 fiber (T06) X Working area max.: 6500 mm Y Working area max.: 200 mm Laser power: 3000 Watts Control system: SINUMERIK 840D SL Standard equipment Machine - Machine table for automatic loading up to 6.5 m - Max. outer diameter of the circle: Round tube up to 152 mm, Rectangular tube up to 170 mm - LoadMaster tube 6.5 m with grouping chamber - Part removal station for 3 m finished part length (incl. scrap conveyor with container) - Part stacking station (with conveyor table and conveyor table extension) - NitroLine - FocusLine - Laser power control Ibedpfx Apezv Tnwjcob - Programmable cutting gas - Automatic start/stop system - Work area lighting Laser - Solid-state laser TruDisk 3001 with one laser output - Maintenance log function - Laser chiller Cutting unit - Lens cutting head with 150 mm focal length - ControlLine Control system - Sinumerik 840DSL - Remote maintenance interface Data transfer - USB interface - RJ45 network interface Safety - CE certification - Light barriers - Compact dust extraction system (1500 Nm*/h) - Protective housing with certified safety panes Service - Network installation via teleservice Additional machine equipment - SeamLine Tube with inner detection - Adaptive clamping technology - Adaptive clamping feeding station - Adjustable feed chuck - Chip conveyor, longitudinal - Technology package for bevel cutting Automatic LoadMaster Tube 6.5 m - LoadMaster Tube 6.5 m at the rear - LoadMaster Tube 6.5 m tube diameter 15 mm - Unloading station 4.5 m - 1 set of clamping jaws - 1 set of guide rollers - Various support sets for round and rectangular tubes

Condition: used, MULTIHEAD TUBE CUTTING MACHINE MAIR TRA3000/7/7/CAR + RA1 SCOPE OF SUPPLY 1 Loading table with: - Motorised slings loader, to load the complete bundle - Lateral chain transport conveyor, to introduce the tube 1 by 1 - Top support with vertical adjustment (to avoid loading of 2 tubes when working with small diameters) - Length stop and tube loader 2 Cutting machine TRA3000 with: - 7 independent cutting heads - All cutting heads can be lifted independently - Linear guide with scale for positioning of the cutting heads - Centralised tube transport system with production cycle adjustment 3 Single collecting cradle RA1, with: - Independent cradles, to collect the cut tubes - Lateral separators between cradles, to adapt the cradle length to the tube length - Motorised endless slings for soft tube collection. 4 Main electrical cabinet and operator control panel 5 Safety barriers around the machine & photelectric barriers & emergency line. Note: Safety barriers were installed by owner to have the machine under “safety conformity” TECHNICAL SPECIFICATIONS Manufacturer: MAIR Model: TRA 3000/7/7/CAR +RA1 Yearly maintenance: made by MAIR Spain Ibjdpfxoymax Eo Apcjb Max. input tube length: 7000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-50x50 mm (see note) Rectangular tubes (HxW): 12x16-60x40 mm (see note) Thickness Min-Max.: 0.8 - 4.0 mm (depending on yield) Cutting lengths: 330-6900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 7 Motors power: 2.2 kW Cutting disc diameter: 300 mm Voltage: 380 / 50 V/HZ, 3 phases Compressed air: It must be supplied filtered and lubricated 6 bar Total installed power: Aprox. 21kW – 50Amp Manufacturer: MAIR Model: TRA 3000/7/7/CAR +RA1 Yearly maintenance: made by MAIR Max. input tube length: 7000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-50x50 mm (see note) Rectangular tubes (HxW): 12x16-60x40 mm (see note) Thickness Min-Max.: 0.8 - 4.0 mm (depending on yield) Cutting lengths: 330-6900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 7 Motors power: 2.2 kW Cutting disc diameter: 300 mm Voltage: 380 / 50 V/HZ, 3 phases Compressed air: It must be supplied filtered and lubricated 6 bar Total installed power: Aprox. 21kW – 50Amp

Condition: used, Multihead cutting machine TRA2000/7/7, made by MAIR Including: 1) Loading table 2) Cutting machine with 7 cutting heads 3) Operator control panel 4) Unloading bin Optional to be build new upon requirement : 5) Double output craddle 6) New electrical control panel with frequency converters for cutting motors 7) Sound and safety protection cover Ibjdpsymaypofx Apceb Max. tube length: 7.500 mm Max. loading capacity: 2.000 kg Round tubes (outer ø): 12 – 50 mm Square tubes (hxw): 12×12 – 40×40 mm Rectangular tubes (hxw): 12×16 – 50×30 mm Max. thickness: 2,5 mm Length of tubes to be cut: 330 – 7.400 mm Number of cutting heads: 7

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 30 h, control type: CNC control, actuation type: electric, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: Raycus, laser hours: 30 h, laser power: 6,000 W, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, pipe diameter (max.): 220 mm, pipe length (max.): 6,000 mm, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,015 mm, travel distance Y-axis: 1,515 mm, travel distance Z-axis: 50 mm, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, 🇳🇱 Verkooptekst voor uw BEKE 6 kW Fiber Lasersnijmachine (3000 × 1500, Reci‑kop) Bent u op zoek naar een krachtige, nauwkeurige en betaalbare lasersnijmachine voor metaalbewerking? Deze BEKE 6 kW fiber lasersnijmachine, uitgerust met een Reci‑laserkop en een efficiënt werkbereik van 3000 × 1500 mm, biedt uitstekende prestaties voor zowel dunne als dikke metalen platen. Echt 6000 watt vermogen voor het snijden van staal, RVS, aluminium, koper en messing Reci‑laserkop voor stabiele prestaties, hoge snijkwaliteit en lage onderhoudskosten Compact werkbereik van 3000 × 1500 mm, ideaal voor standaard platen en efficiënte productie Strakke snijranden zonder nabewerking Hoge productiesnelheid, perfect voor seriewerk en industriële toepassingen Betrouwbare onderdelen: Reci‑kop, Fuji servo’s, HIWIN geleiders Gebruiksvriendelijke CNC‑besturing met hoge nauwkeurigheid Ibsdozyv Syopfx Apceb Lage energieconsumptie vergeleken met CO₂‑lasers ⚙️ Technische specificaties Werkbereik: 3000 × 1500 mm Vermogen: 6000 W fiber laser Positioneringsnauwkeurigheid: ±0,03 mm Herhaalnauwkeurigheid: ±0,02 mm Snijsnelheid: tot 40 m/min Snijdikte: tot 20 mm, afhankelijk van materiaal Koelsysteem: industrieel waterkoelsysteem

Condition: repair required (used), Year of construction: 2007, operating hours: 67,367 h, functionality: not functional, machine/vehicle number: W288, repeat accuracy: 0.01 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 200 mm, positioning accuracy: 0.01 mm, workpiece weight (max.): 3,000 kg, type of input current: three-phase, input voltage: 250 V, sheet thickness aluminum (max.): 100 mm, table length: 3,000 mm, operating speed: 6,000 mm/s, table width: 1,500 mm, tank capacity: 5,500 l, pressure: 3,600 bar, positioning speed: 60 m/min, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 2 m/min, table height: 1,000 mm, operating pressure: 3,600 bar, year of last overhaul: 2024, waste water connection: 50 mm, input frequency: 50 Hz, power: 120 kW (163.15 HP), controller manufacturer: Bystronic, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, Equipment: safety light barrier, Bystronic Byjet 3015 Waterjet. This machine has a 3000 x 1500 cutting table up to 200mm thickness, complete with two cutting heads. The waterjet is powered by a Bypump 50 APC hydraulic unit. This machine was regularly serviced by a Bystronic service engineer. Ibodpfx Apozlt Ayscjb This machine is being sold as as a spare parts machine, but could be easily put back in production. It has a new hydraulic pump fitted shortly before it was taken out of production. It comes complete with a chain conveyor with paddles for the automatic removal of used garnet from the cutting beds. It also comes with an air blower and reservoir tanks for the raising and lowering of the water levels in the cutting bed for reducing the noise levels during the cutting process.

Condition: good (used), functionality: fully functional, Year of construction: 2021, laser type: fiber laser, laser hours: 1,347 h, laser power: 3,000 W, • The state-of-the-art laser cutting system, designed to the latest standards and featuring a gantry construction with a dual-drive system, has a generously sized working area of 3000 x 1500 mm, making it suitable for the most common sheet metal formats. • The automatic laser cutting head features Auto Focus (motorized focus adjustment), automatic height control, and collision protection. Ibjdpfx Aozz A A Ispceb • Optimized setup times thanks to a change table system and an easy-to-use CNC control system with an extensive material database. • The fiber laser with 3000 W steel cutting power guarantees the highest cutting quality and productivity. • Thanks to the maintenance-free laser source, the cutting system also boasts low maintenance and operating costs. Complete system with CNC control (CypCut) Ytterbium fiber laser MAX Optical fiber cable High-pressure cutting head Automatic focus adjustment Laser protection enclosure Automatic change table system Filter extraction system Central lubrication Cooling water chiller CAD/CAM software Operating and programming manual Inspection while the system is running is welcome.

Condition: ready for operation (used), 2 units for sale. Machines are operational. Good condition. Ready for work. Isdpfowb Sx Iox Apcebb

Condition: good (used), Year of construction: 2002, Used fabric cutting machine Investronica Diamond CV 070, max cutting thickness 7 cm, usable width 200 cm. Equipped with Vortex blade cooling system and inverter for turbine management. Machine in good condition, new conveyor belt. Ibsdpjwdwxlefx Apceb

Condition: good (used), Polar Mohr 78 ES Paper Guillotine Machine in very good condition, serviced and ready to use. Made in Germany. Technical specifications: Cutting width: 780mm Stack height: 120mm LCD display Power supply: 400V Weight: 1400kg Enlarged side tables Chrome table surface Table lighting and optical cutting line Continuously adjustable pressure Ibedpfxjzw T Ado Apcob Additional rear table covers Spare knife, cutting sticks, tapping block, and operating tools.

Condition: reconditioned (used), Year of construction: 1995, functionality: fully functional, cutting width (max.): 1,370 mm, BM5150 P137 CUTTING LINE - refurbished => Package Price €26.000 1) Polar 137EMC-MON AT Guillotine 1995 -> single item price 18.000 € 2) Transomat TR1ER145-3 Downstacker/Palletiser -> single item price 10,000 € 3) Jogger Polar RA-B-5 with Air Removal -> single item price 3.000 € 4) Paper Lift -> single item price 1.500 € Contact us for further info and for personal price negotiations Ibedpfx Apev Ic H Djcjb

Condition: used, Year of construction: 2009, machine/vehicle number: 725, ECKERT plasma-gas cutting machine - JANTAR 2 Parameters: Isdpfxoqntkie Apcjbb Working width 2500 mm Working length 6000 mm Positioning accuracy +/- 0,005mm Thickness of plasma cutting - 35 mm Thickness of torch cutting - 120 mm Max thickness of sheet metal/cutting max 120 mm

Condition: good (used), Year of construction: 2019, functionality: fully functional, Table surface: 7,500 x 2,500 mm Positioning speed: 40,000 mm/min Positioning accuracy: = 0.06 mm/min Repeatability: 0.05 mm/min Machine weight approx.: 2,300 kg MicroStep CNC cutting system of the MG series with the following features: - Hypertherm® XPR170™ plasma power source with automatic OptiMix™ console - Plasma rotator for weld preparation - Fully automatic oxy-fuel torch - Fully automatic drilling spindle MG-40-P26 with 26.8 kW - Steel portal driven and stiffened on both sides for a clear and precise cut - AC servo motors from Panasonic for high drive power and excellent dynamics - Durable and low-maintenance planetary gearboxes - User-friendly machine control - High reliability and long service life, even in three-shift operation - MicroStep iMSNC® machine control with MMI console and 24" touchscreen - iMSNC® module | User management - iMSNC® module | Expert system - iMSNC® module | Automatic calibration of mechanical sensing - iMSNC® module | Visualization of wear parts - iMSNC® module | Assistant for loading CNC programs Ijdpfozwl Dmex Apcsbb - iMSNC® module | Management of cutting programs (MRP) - iMSNC® module | EcoInfo - iMSNC® module | MachineInfo - iMSNC® module | Assistant for service and maintenance operations - USB 3.0 connection for storage media - Remote maintenance module MicroStep RemoteDiagnostics® - Remote maintenance access via TeamViewer - Two LCD control units on the portal - Laser pointer with automatic offset transfer - Hypertherm® XPR170™ plasma power source - Industry-leading cut quality - X-Definition - Advanced HyDefinition technology - Automatic gas console | OptiMix™ - CNC interface for the Hypertherm® XPR170™ Connection to the CNC control - Module for automatic power control of the Hypertherm® XPR170™ - Electrical and mechanical torch sensing - Remote activation of plasma power source - Double-sided cable protection (collision protection) of the portal bridge via emergency stop - Extraction table system with oscillating conveyor OXYtrac 2580 HD Main components and dimensions: 1 Table consisting of: 4 table elements WxLxH (mm) 2,600 x 2,080 x 950 Total support area: WxLxH (mm) 2,600 x 8,320 x 950 Contiguously usable working area per table: Vertical cutting: WxL (mm) 2,500 x 8,000 Bevel cutting: WxL (mm) 2,000 x 8,000 Table width (outer): W (mm) 2,830 2 Oscillating troughs L (mm) approx. 8,900 Cutting processes and associated extraction capacity: 1x Plasma max. 170 Amp., bevel cutting 1x Oxy-fuel max. 100 mm workpiece thickness regularly 200 mm workpiece thickness occasionally

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 76745, cutting width (max.): 920 mm, insertion height: 120 mm, Year of production 2015 Technical data: Cutting width: 920 mm Stack height: 120 mm Weight: 2000 kg Power supply: 400 V Ibsdpfx Ajx Upumjpcob Machine can be inspected anytime. Works perfectly. Very well maintained. We are first owners.

Condition: good (used), Year of construction: 2017, laser type: fiber laser, laser power: 700 W, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 3 mm, sheet thickness aluminum (max.): 3 mm, working length: 3,000 mm, working width: 1,500 mm, Equipment: cooling unit, documentation/manual, Well-maintained HSG HS-M3015C fiber laser cutting machine manufactured in 2017, previously used in daily production at our metal fabrication company. The machine was replaced only due to the installation of a newer, higher-capacity laser cutting system as part of our production upgrade. It was fully operational until it was dismantled and is offered directly by the end user. The machine is complete, carefully dismantled, and ready for immediate pickup. This laser is an excellent choice for companies processing thin sheet metal, where reliability, low operating costs, and precise cutting are more important than very high laser power. Technical Specifications Manufacturer: HSG Laser Model: HS-M3015C Year of manufacture: 2017 Laser source power: 700 W Working area: 3000 × 1500 mm Power supply: 380 V / 50 Hz Fiber laser technology Cutting Capacity Ibsdpfx Aezmbyvepcjb Mild steel: up to 8 mm Stainless steel: up to 3 mm Aluminum: up to 3 mm Included Equipment Cooling unit (chiller) Machine documentation User manual Condition Fully operational before dismantling Complete machine Ready for immediate pickup Inspection possible by appointment Loading assistance available Why choose this machine? Direct sale from the end user Used in regular production until replacement No accident or damage history Selling only due to production modernization Well maintained Cost-effective solution for sheet metal fabrication Location: Czech Republic

Condition: like new (used), Year of construction: 2026, operating hours: 5 h, functionality: fully functional, type of input current: AC, total width: 3,000 mm, total length: 4,500 mm, input voltage: 380 V, feed length X-axis: 2,000 mm, feed length Y-axis: 3,000 mm, feed length Z-axis: 150 mm, working width: 2,000 mm, total height: 3,000 mm, cutting width (max.): 2,000 mm, cutting height (max.): 3,000 mm, compressed air connection: 3 bar, High-Precision CNC Cutting Machine for Carbon Fiber Prepreg & Composite Materials Iodpoy Tvatsfx Apcjbb Professional CNC cutting plotter designed for precision cutting of carbon prepreg, fiberglass, technical textiles, foams, leather, PVC, and other advanced composite materials. Ideal for aerospace, automotive, marine, motorsport, and composite manufacturing applications. The machine delivers extremely accurate and repeatable cuts while significantly reducing material waste and production time compared to manual cutting. Equipped with vacuum table technology for secure material fixation and clean, stable processing of delicate prepreg materials. Suitable for both prototyping and serial production. Key advantages: • High cutting precision and repeatability • Excellent for carbon fiber prepreg cutting • Fast and efficient production workflow • Clean edge quality without fraying or burning • Reduced material waste • Vacuum working table for stable material holding • Industrial CNC control system • Vacuum pump included • Suitable for complex geometries and nested parts • Reliable operation for composite manufacturing environments Applications: • Carbon fiber prepreg cutting • Fiberglass and aramid fabrics • Composite part production • Automotive and motorsport components • Marine composite manufacturing • Aerospace applications • Technical textile cutting • Prototype and serial production The machine is in very good working condition and can be tested on-site. Vacuum pump is included in the sale. For additional information, technical details, videos, or pricing, please contact us.

Condition: used, Year of construction: 2013, operating hours: 3,000 h, functionality: unexamined, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, For sale as a complete package: Waterjet Cutting Machine STM 3015, year 2013, with computer from 2018 and 3 network dongles for IGEMS software. Working area: 3000x1500mm High-Pressure Pump Ecotron 40.37, year 2013 Water Softening System, year 2018 – like new Abrasive Backwash System, year 2013 Column Slewing Crane Abus 2t, year 2018 – like new Vacuum Lifting Device Devo-Tech, load capacity 1800kg – like new Ibsdpeyq Rdyjfx Apcob Various accessories and sandbags available The system was purchased at the end of 2018 and commissioned at the beginning of 2019. The waterjet system and pump had been completely overhauled by the supplier at that time. Unfortunately, the cutting system was hardly used. It only ran for a few hours per year and has not been in operation since about July 2025. The high-pressure pump is defective (leaks water and is not sealed). Both high-pressure cylinders have been replaced in recent years. Last serviced in 2025. According to the service technician, repair of the pump would cost approx. CHF 5,000 to 6,000. The crane and vacuum lifting device can also be purchased separately. Please send your offer with price expectations. In 2019, the new price for the crane and vacuum lifter was around CHF 37,000 incl. VAT. The machine can be inspected during business hours. It is still connected, but has been drained and cleaned. Please arrange appointments or submit offers via email, not by phone.

Condition: used, functionality: fully functional, Year of construction: 2007, machine/vehicle number: A0270 A0115, control type: CNC control, laser power: 5,000 W, sheet thickness (max.): 20 mm, power: 5 kW (6.80 HP), input voltage: 400 V, input current: 160 A, input frequency: 50 Hz, compressed air connection: 7 bar, For sale: TRUMPF TruLaser 5060 laser cutting machine, laser power 5,000 W, manufactured in 2007. The machine is fully operational, currently connected in production, and can be inspected while powered on by appointment. Technical data: Ibodpfxszgc Hwe Apceb Manufacturer: TRUMPF Model: TruLaser 5060 Machine type: A0270 Machine no.: A0270A0115 Year of manufacture: 2007 Laser power: 5,000 W Power supply: 400 V / 50 Hz Rated input: 105 kVA Required fuse protection: 3 × 160 A Control voltage: 24 V DC Compressed air: 7–10 bar Nitrogen N₂: 30 bar Oxygen O₂: 20 bar Included equipment: KLH Kältetechnik chiller, type L30/36-TK3.02 Refrigerant: R134a, filling quantity 21.5 kg Hante MF-L extraction/filter unit Air volume: 2,500 m³/h Filter area: 50 m² Standard accessories as per agreement Condition: Used machine, fully functional and currently connected in production. Inspection while powered on is possible in Košice, Slovakia. Sale with invoice. Price is net, VAT not included. Dismantling, loading, and transport are at the buyer’s expense and responsibility. The machine will be available for collection approximately from 09/2026, or by agreement. Location: Košice, Slovakia

Condition: used, Year of construction: 2012, operating hours: 7,500 h, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 35 mm, sheet thickness steel (max.): 35 mm, sheet thickness aluminum (max.): 30 mm, overall weight: 1,500 kg, input voltage: 400 V, total width: 4,000 mm, total height: 2,000 mm, total length: 8,000 mm, cutting height (max.): 110 mm, track width: 2,950 mm, Equipment: documentation/manual, Selling an Oerlikon plasma cutting system, Plasmatome 20 HPC, Nertajet HP 300 plasma source with CPM 400/450 torch heads for aluminum, steel, and stainless steel. Cutting range 2 x 6 m, cutting current 30-260 A, power consumption 80 kVA. Ibodpfjv I U Hcjx Apcob Material thickness of the sheets to be cut with piercing up to 35 mm, external thickness up to 50 mm. Sold without cutting table.