Used Flail Mower for sale (205)

Condition: used, Year of construction: 2025, working width: 9,100 mm, Mower Bar: Disc | Claas Disco 9300 Direct Swather Demo unit in use Year of manufacture: 2025 Large-area mower for rear tractor mounting, Cat. III - Working width: 9.10 m (8.90 m) Lsdpfxjwu Irks Affjak - Main frame with optimized center of gravity due to rearward-angled outriggers - Low-speed concept with reduced speed to 850 rpm DIRECT SWATHER: - Central or unilateral swath merging via augers - Conical auger design for consistent crop flow - Swiveling augers for wide crop distribution - Auger discharge chute equipped with knife and counterknife Features: Wear skids Three-point hitch Drive shaft 1 3/8", 6-spline ISOBUS cable Outer protective curtains, hydraulically foldable Individual section lift (2-hose) Optionally available (not included in price): CLAAS Disco 3200 F Profil Front-mounted disc mower without conditioner 3.00 m working width with wear skids incl. ACTIVE FLOAT hydro-pneumatic suspension incl. drive shaft | Internal no.: 11264119

Condition: excellent (used), Year of construction: 2024, 158 USED BCS 740 single-axle tractor. Manufactured in 2024 - machine under warranty. Warranty: 2 years. EQUIPMENT: - flail mower - operator's trolley - engine housing - hour meter - quick coupler Laedpfsxgqrbsx Affok - aluminum ramps

Condition: used, mileage: 1,200 km, power: 200 kW (271.92 HP), first registration: 09/2025, fuel type: diesel, Year of construction: 2025, Equipment list: * Axle ratio i = 6.377 * Differential lock on front axle * Trailer brake, dual-line * Rear mounting brackets * Comfort steering (electrohydraulic power steering) * Front mounting plate EN15432-1, Type F1/C * Wheelbase 3,150 mm * VarioPilot (dual steering, left/right interchangeable) * Side underrun protection * Air-suspended comfort seat with seat heating, passenger side * Air-suspended comfort seat with seat heating, driver side * Additional left stalk switch * Right armrest with control lever mounting, driver’s seat * Plug-in control lever on driver’s seat armrest * Universal bracket for external control unit * Side-sliding center console, additional storage compartment * Air conditioning system * Activated carbon filter * Constant current sockets 12V (C3), 12V and 24V center console * On-board 24V/25A socket in cab, with C3 signal * Front camera * Rear view camera at end of towing vehicle * Monitor for camera system * Universal electrical interface per EN16330 * Battery master switch on battery box * ABS trailer socket 24V, 7-pin / 5-pin * Trailer socket 12V, 13-pin * Front socket 24V, 7-pin * Reversing warning system * Cab strength compliant with ECE-R-29/03 * Mowing door on right and cab prep for mower seat * External sun visor, transparent * Clear, heated windscreen * Transmission oil cooling, oil/air * EasyDrive (hydrostatic drive) (SN) * Automatic Shift (EAS) * Hydraulics for tipper body * age, 2-circuit, 3-cell, full prop, snowplow relief * Tipping cylinder * Rear hydraulic coupling, 4-way, cell 1+2 * Pressure line at rear, 2nd hydraulic circuit * Separate return line at rear * Hydraulic quick couplings ISO 7241-1 A / ISO 5675 * Implement carrier series * Compaction stage (4-5) 11 UG1 300/400 medium * Compaction stage (6) 0 * Compaction stage (7-8) 12 chassis LL * UNI-TOUCH operating system with 10.5" touchscreen * Combination instrument, 12.7 cm, with video function * Digital tachograph, 2nd generation, version 2, ADR * Tachograph manufacturer: VDO * Seatbelt warning, driver and passenger * Warning light for telescopic cylinder * Digital radio with USB port and Bluetooth * Truck Data Center 8, base * Driver assistance card, Europe region * Pre-installation for Truck Data Center 8, base * AdBlue tank 25 l * Warning beacons, LED, yellow, left and right, with tripods * Additional LED high beam, roof bar mounted * Work lights, upper cab rear panel, LED * Additional, height-adjustable headlights on A-pillar, LED, heated * Engine OM936, inline 6, 7.7 l, 200 kW (272 hp), 1,100 Nm * Engine specification Euro VI, E * High Performance Engine Brake * Clean-Fix rapid radiator cleaning system * Engine PTO including front PTO * Dropside body, internal dimensions 2,385 x 2,075 x 400 * Subframe for dropside body Lsdpfx Afewtgyqefeak * Increased trailer load, ZAA max. 20t * Heavy-duty tow hitch, large jaw, ring type, 38.5 mm bolt * Flatbed rims 10.00V-20 * Warning stripes red/white, retroreflective * Warning triangle and beacon * Attention Assist * Traffic Sign Assist * Tire pressure monitoring system * Sideguard Assist 2 * Frontguard Assist * Pre-installation for alcohol interlock * First aid kit * Weight variant 14.0 t (7.1/8.0) * Vehicle version according to GSR, phase B * Manufacturer’s warranty: 2 years from initial registration/commissioning * Instruments/labels/manuals in German Other notes: * Trade-in and purchase of vehicles and machines possible. * Sales price excludes transport * No liability for typographical and printing errors. * S

Condition: new, empty load weight: 860 kg, maximum load weight: 2,640 kg, overall weight: 3,500 kg, loading space length: 3,550 mm, loading space width: 200 mm, loading space height: 1,690 mm, tire size: 195/50r13c, *Low loader *construction machinery transporter tandem *for construction machinery, excavators, platforms, scissor lifts and many other vehicles. Laedpjn E Rm Eefx Affsk Hapert builds extremely stable *car trailers* such as this INDIGO LF-2 355x169cm. The *construction machinery trailer* is easy to load via a very stable lattice access flap. An absolute *universal trailer* not only for construction equipment but also for transporting lawn mowers, tractors, bulk goods and small vehicles. Full-length and accessible wheel arches make it easier to get out of a wheel loader. Here, the driver no longer damages the mudguard of the *car trailer*. The *machine transporter* is equipped with a stable lattice flap, parabolic suspension, automatic support wheel, accessible wheel arches, extremely stable welded and hot-dip galvanized frame and V-drawbar. We also offer accessories for machine transport trailers such as bucket storage, aluminum floor, tarpaulin with frame, lashing straps and anti-theft devices at a reasonable price.

Condition: ready for operation (used), operating hours: 8,211 h, functionality: fully functional, mileage: 60,430 km, power: 55 kW (74.78 HP), first registration: 09/2018, overall weight: 3,500 kg, fuel type: diesel, color: white, axle configuration: 4x4, maximum load weight: 1,600 kg, empty load weight: 1,900 kg, next inspection (TÜV): 10/2027, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, Equipment: air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1600 Vacuum Sweeper from First Owner Major engine service including timing belt, water pump, oil, oil filter, and fuel filter will be carried out by us free of charge prior to sale. Machine version equipped with the new drive pedal system 4,301 sweeping hours 8,211 total operating hours 60,430 kilometers 4×4 all-wheel drive – hydrostatic all-wheel drive system Reversing camera Swept material container made of stainless steel Ledpfxowwhyte Affsak Wheelbase: 1,600 mm Track width: 1,055 mm Fresh water tank: 180 liters Unladen weight: approx. 1,900 kg Permissible total weight: 3,500 kg Length: 4,510 mm / Width: 1,210 mm / Height: 1,970 mm Driving speed: 0–40 km/h Working speed: 0–24 km/h Noise insulation package Selectable working speeds: 1,600–2,400 rpm (ECO/Standard/MAX) Engine: water-cooled 4-cylinder VW industrial diesel engine Low-emission Euro 5 Fuel tank capacity: approx. 60 liters Hydrostatic all-wheel drive 2-circuit high-pressure hydraulics - Circuit 1 (front): 0–50/0–70 l/min, 225 bar - Circuit 2 (rear): 0–20/25/30 l/min, 195 bar Hydraulic service brake via foot pedal Cab with air-suspended driver’s seat Air conditioning / heating Water treatment system Hydrant connection Dosing system Permissible total weight: 3,500 kg Unladen weight: 1,950 kg Additional attachments from HAKO such as broom sweeper, snow plow and lawn mower possible (not included with delivery) Errors, subject to change, and prior sale reserved We sell exclusively under our general terms and conditions and exclude any warranty. Errors, subject to change, and prior sale reserved. We are available Monday to Friday from 9:00 am to 5:00 pm without interruption, Saturday by appointment; outside these hours, appointments by phone are possible. We are happy to accept your current used equipment/vehicle as trade-in. Sales to commercial customers and exporters are given preference, this applies to our entire vehicle inventory. The above information is non-binding. Errors, changes, and prior sale reserved.

Condition: used, Year of construction: 2015, operating hours: 1,464 h, power: 16 kW (21.75 HP), KUBOTA G23-2 HD Ride-On Lawn Mower with High-Dump System, 16.1 kW/22 HP Includes RCK 48 mid-mounted mower, 1.22 m wide, 640 mm grass catcher with hydraulic high-dump system. Engine: 898 cc 3-cylinder KUBOTA diesel engine, Stage V emissions standard, 16.1 kW (21.9 HP) (SAE J1995) * Transmission: HST transmission, load-sensing, max. speed 19 km/h * Mechanical differential lock * Cruise control * Single-pedal steering * PTO drive * Oil-cooled disc brakes * Front turf tires: 16 x 7.5-8, rear turf tires: 24 x 12.00-12 Comfort: * Fully hydraulic power steering, tilt-adjustable steering wheel * Coolant temperature indicator * Hour meter * Tachometer * Easy Checker Ledpfx Afswcagcjfjak * Safety system for mower and ground drive * "Kross-Control" single-lever control unit for all hydraulic functions * Integrated front tie-down eyes Mid-mounted mower: * Rotary mower with 2 blades, drive via PTO shaft, electrically operated magnetic clutch, blade drive via spur gear, hydraulic mower lift, central cutting height adjustment 25-102 mm, rotary knob, 13 settings, blade length 673 mm (1.22 m), ground clearance 150 mm Grass catcher: * Hydraulic emptying, dumping height (HD) 1.97 m, integrated fill level indicator, including front weight holder, additionally equipped with 2 front weights * Working width: 122 m ----Well-maintained used machine from first owner, good condition - ready for immediate use! Errors and changes excepted!

Condition: new, Year of construction: 2022, working width: 3,000 mm, Cutter bar: Discs | Claas Rear Disc Mower Disco 320 C Stock item from 2023 Disc mower with tine conditioner 3.0 m working width 1130 kg net weight with MAX CUT cutter bar Lasdpfx Afjxf U N Uofjk 7 disc modules with 2 blades each incl. quick blade change 1000 rpm PTO speed Mounting category II | Internal No.: 11054146

Condition: new, empty load weight: 115 kg, maximum load weight: 635 kg, overall weight: 750 kg, loading space length: 2,006 mm, loading space width: 1,006 mm, loading space height: 1,100 mm, Year of construction: 2024, Low loader tipper trailer Garden Trailer 150 KIPP with high frame, high tarpaulin and support wheel Low loader Garden Trailer 150 KIPP with high frame and high tarpaulin - you can connect this model to any car with a class B driving license. The low loader has a tiltable drawbar, which makes it easier to load and unload your transported goods, especially bulk goods. The compact size of the loading area of 150x106 cm makes maneuvering with the low-loader attached to the hook child's play. Larger purchases, new furniture or household appliances or consumer electronics will not be a challenge for you if you have a low-loader. We offer delivery directly to the specified address to all German-speaking countries. We enclose all the documents required for registration with the low-loader. Low loader with high frame and high tarpaulin When you buy the Garden Trailer 150 KIPP low loader with high frame and high tarpaulin from UNITRAILER, you receive the following: Fully folding drawbar so that it can be placed on the rear dropside in a low garage or under the house. Vehicle with very comfortable loading and unloading of goods, which is possible by tilting the loading area. Documents: adapted to your vehicle. Simple and hassle-free registration procedure thanks to all the necessary documents - invoice, EC certificate of conformity, vehicle registration document, warranty book (2-year warranty) and our certificate. Further information can be found under this link. Possible additional equipment - support wheel, additional drop sides, anti-theft device. Support from our experts, who will be happy to answer any questions you may have. Why should you choose the low loader with high frame and high tarpaulin? Ordinary low-loaders available in large supermarkets or even cheaper, old-fashioned professional low-loaders are usually not equipped with the tipping option. In this case, the drawbar is permanently attached to the low-loader. Every loading and unloading means that you have to lift the goods, which is often very difficult. The low-loader solves this problem because its loading surface tilts to make the entire operation easier. All you have to do is push the transported goods directly onto the ground. There is no need to lift or strain your hands or back. Laedpfx Aeuk H Umeffsk Low loader with removable rear dropside Low loader with removable rear drop side The low loader is particularly suitable for transporting lawn mowers or various types of trolleys. In this case, the sloping surface becomes an access ramp that is very easy to drive on with such equipment. You don't have to destroy and dirty your vehicle to transport this type of item. We don't leave an unpleasant smell in it that the rest of the travelers complain about. The low loader solves the problem of transporting dirty, sharp and odorous materials that hinder transportation by car.

Condition: used, Year of construction: 2023, operating hours: 1 h, MULAG Combination Mowing Device MKF 600 for Mounting on Unimog Mowing combination MKF600 consisting of: - Front boom mower MFK 500 - Verge mower MRF Base unit for single or dual-operator use, designed for front mounting plate size 5 with the following specification: Equipment Front Boom Mower MFK 500 * Designed for right-hand operation * Boom swivel range: 190 degrees * Hydraulically actuated collision protection with damping of the boom system via hydraulic accumulators * Hydraulic lateral shift of the boom by 1300 mm (in combination operation) / 1800 mm (in solo operation) * Float position of mowing units can be switched on/off * Quick-change device for mowing units * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve * Operating hours counter * Proportional mlcontrol permanent hydraulics included * (CAN bus technology) for the boom, including dual-cylinder actuation (multiple functions may be performed simultaneously) * Boom relief regulation type AER with stepless ground pressure adjustment via potentiometer, can be switched on/off * Operator information system with TFT color display, including system monitoring and diagnostic support * Multifunction lever mlbasic single-handed control unit with multifunction lever (ergonomically designed for right hand use, 4 functions on one plane. All functions are proportionally controllable) * Combination control panel * Control of both units via multifunction control lever * Oil cooling system with electric temperature monitoring included * Tool drive via front PTO * Hydraulic pump for 1st implement drive 62l / 340 bar Lsdpfx Afoxcxmlofeak * Hydraulic pump for 2nd implement drive 50l / 280 bar * Filled with Panolin HLP Synth, fully synthetic, rapidly biodegradable hydraulic oil * Telescopic boom system hydraulic adjustment for extending reach by 1,000 mm * Reach 6.50 m from vehicle center in combination operation * Reach 7.00 m from vehicle center in solo operation * 2-way electro-hydraulic switching valve controlled from operator panel (additional hydraulic dual functions) * Hydraulic rotation device for mowing implements, swivel range of 230°, operable from control panel. Boom side integrated, including quick-change plate * Hydraulic couplings: Quick coupling kit for flat-sealing quick couplers on mower * Cable set ES6 Front Unimog Connection of operator panel via universal electrical interface ES6 of Unimog * Hydraulic stabilizer legs included, 2 pieces, height adjustable * LED work lights, 2 pieces, mounted on boom * High-pressure water hose routing on boom Verge Mower MRF 350 consisting of the following configuration: Verge Mower MRF 350 * For right-hand operation * Reach 3.50 m from vehicle center * Hydraulic lateral adjustment of verge mower by 1000 mm (in combination operation) * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve (knife shaft overrun limited to approx. 4 seconds) * Operating hours counter * Sensing automatic: control of the mowing head around obstacles. Mowing speed adjustment for evasive movement is steplessly adjustable by the operator at the control panel. * Single-hand operation unit with holder in Unimog Verge Mowing Head RMK 1200 * Working width: 1200 mm, Cutting thickness: max. 10 mm * MS-R blade * Knife shaft speed: approx. 3000 rpm * Standard sensing arm Mowing Head MK 1200 plus * Working width: 1200 mm, Cutting thickness:

Condition: used, mileage: 1 km, power: 100 kW (135.96 HP), first registration: 08/2013, empty load weight: 6,000 kg, maximum load weight: 5,000 kg, overall weight: 2,300 kg, axle configuration: 4x4, brakes: other, color: red, driver cabin: other, gearing type: other, emission class: none, number of seats: 2, Year of construction: 2013, Equipment: all wheel drive, * German equipment * Condition, see photos * Only 6,426 operating hours * Link to video: ?v=q3Q39J2ZX20 * Here is a video * Mower combination Dücker MK25 consisting of base unit, RSM mower & DUA800 boom * We will be happy to send you a video of the MK25 mower combination * Complete documentation * Mower combination Dücker MK25, year of manufacture 2013 Ljdpfxjw U Afks Affoak * Mower combination with embankment mower and verge mower mounted on booms. Suitable for municipal carrier vehicles and tractors with municipal plate sizes 3 and 5. Operated via CAN-BUS system using two joysticks, a multicontroller, and a touchscreen display. Usable on both left and right sides. Driven by PTO shaft or vehicle hydraulics. Foldable for transport – transport width 2.50 m. * DUA 800 boom with 3-part arm and telescopic extension. Reach from vehicle center up to 7.80 m. Hydraulic side shift by 1.60 m. Changeover from right- to left-hand operation possible. Swivel angle 270°. Standard boom relief and floating position. Flail mower head VMS 1200 with working width 1.20 m. * RSM boom with computer-assisted controls operated via control panel with automated buttons. Ideal for mowing around guide posts, signs, and trees. Reach from vehicle center up to 3.60 m to the side and 3.20 m to the front. Can be switched from right- to left-hand operation. Flail mower head TMK 1300 with working width 1.30 m. Automatic tilt adjustment. * Working width: 1.2 m | 1.3 m. Weight: 2,300 kg. Drive: PTO shaft/vehicle hydraulics. Mounting: Municipal plate size 3 | Municipal plate size 5. Reach: 7.80 m | 3.60 m. Boom swivel angle: 270°. Hydraulic side shift: 1.6 m. PTO shaft speed max. 710 rpm. Vehicle hydraulic requirement: min. 68 l/min at 340 bar. Transport width: 2.5 m. If a new TÜV inspection is required, we will be happy to provide a quote from one of our partner workshops. Our offering is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, without new UVV. You can find more trucks on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the goods to avoid any misconceptions about the condition and suitability. Viewing and inspection are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. We assume no liability for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to prior sale and errors.

Condition: new, Hydraulic cable winch HAW1700 with electric valve incl.manual operation and radio remote control for mounting on wood splitter, crane, mini excavator, tractor, stacker, mower crawler and telescopic loader, in viticulture and horticulture, agriculture, construction and forestry and many other applications. With electric hydraulic valve and radio remote control. With the HAW1700 hydraulic winch you can make many tasks easier. Maximum cable capacity 30 m with 6 mm wire rope. Basic equipment 20 m 6 mm wire rope ⦁ Pulling firewood to the log splitter and setting it up ⦁ Pulling logs onto a trailer ⦁ Pulling out rootstocks and trees ⦁ As winch for mounting on backhoe cranes and small excavators ⦁ As a winch for small tractors and narrow-track tractors A robust steel construction with screw-on options on both sides (bottom, back, top) with M 12 thread. This gives you the possibility to use the winch flexibly. Large rope pulley mounted on bearings on both sides for long service life of the wire rope. Ljdpfjfn Tvhjx Affoak The standard pulling force is 1700 kg. The winch can be installed in various positions. A hydraulic brake is available as an option. Depending on the pulling speed and pulling force you need, we can offer you different options. Please contact us, we will be pleased to advise you. ⦁ Maximum working pressure: 225 bar peak ⦁ Continuous operating pressure: 175 bar ⦁ Displacement: 400 ccm ⦁ Torque at 225 bar: 870 Nm peak ⦁ Torque in continuous operation 380 Nm ⦁ Maxima [...]

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, central mower lift cylinders Ledpfx Afogv Dinofoak -Hydraulic cylinder: stroke 105 mm -Piston rod: Ø 23 mm -Sockets: Ø20 x 22 mm -Cylinder: outside Ø 58 mm -Dimensions: 475/70 / H75 mm -Weight: 5.7 kg

Condition: new, Year of construction: 2024, working width: 3,000 mm, Mower Bar: Disc | Claas Disco 3200 C Contour New machine Year of manufacture: 2024 - Disc mower for 3-point linkage, Category III - Central suspension - Working width: 3.00 m - Main frame with optimized center of gravity due to rearward-angled boom - Folding angle in transport position: 120° - Low-speed concept with reduced PTO speed to 850 rpm - Tine conditioner with V-shaped, rubber-mounted steel tines MAX CUT Cutter Bar: - 7 mowing discs with integrated SAFETY LINK safety module Lsdpfx Afsw Ul Uzsfsak - Portal-style cutter bar with dual-sided suspension - Permanently lubricated cutter bar with precision-ground gears (20 mm) - Bolted and torsion-resistant cutter bar construction - One-piece, wave-shaped tray for tunnel effect - Forward-mounted mowing discs with HD wear protection - MAX CUT components made of hardened forged steel - Knife holders with tungsten carbide coating - Quick-change blades Cutter bar suspension: - ACTIVE FLOAT system, hydropneumatic suspension | Internal no.: 11180933

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 2,550 kg, empty load weight: 2,000 kg, lifting height: 2,530 mm, number of seats: 1, Year of construction: 2025, fuel: diesel, load capacity: 950 kg, Equipment: all wheel drive, head guard, hydraulics, pallet forks, standard shovel, H&R Loader 2010-S25: The compact wheel loader for versatile applications with an open cab and narrow track. With a powerful 25 HP 3-cylinder Perkins Turbo engine from Germany and robust all-wheel drive, this compact wheel loader offers outstanding lifting capacity and high maneuverability – perfect for heavy loads and tight work environments. Advantages of the H&R Wheel Loader 2010-S25 Powerful engine from Germany: The 3-cylinder Perkins Turbo engine with 25 HP delivers high performance with low fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its high weight and a lifting capacity of 950 kg, the H&R wheel loader has a relatively small turning circle. Hydraulic quick coupler: With the hydraulic quick coupler, you can quickly and easily switch between different attachments, such as the standard bucket or the manually adjustable pallet fork. Expandable functions: Use the 3rd and 4th hydraulic control circuits to operate additional attachments such as mowers, bale grabs, snow plows, and much more. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives extensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 2010-S25 • Lifts up to 950 kg at 2.53 m (bottom edge of standard pallet fork) • Extensively optimized in Germany • Narrow track for tight work environments • Supplied with standard bucket and pallet fork • Powerful and versatile - versatile • Compact design ensures high maneuverability • Joystick with electric gear shift for precise control • 3rd and 4th control circuits for attachments such as mowers, bale grabs, snow plows, etc. • LED work lights and windshield wipers for clear visibility in all weather conditions • MP3 radio and USB port for entertainment while working • Trailer hitch for additional trailer use • 220 V cooling water preheater for reliable cold start capability and increased engine life • Hour meter for monitoring operating times and ensuring optimal compliance with maintenance intervals • CE compliant according to the EU Machinery Directive • 1-year spare parts warranty Price Net: €19,150.00 VAT: €3,638.50 Gross: €22,788.50 Financing available! Optional Road registration / operating permit: €595 Extended warranty (2 years): €590 Transportation in Germany and Austria: Upon request Ledjrdzymjpfx Affsak Technical details Engine: 3-cylinder Perkins Turbo Engine power: 25 hp (18.8 kW) Emissions class: Euro 5 Lift height: 2530 mm (bottom edge of standard pallet fork) Lift capacity: 950 kg Wheelbase: 1595 mm Tires: 31×15.5-15 Dimensions: 3380 x 1407 x 2340 mm Weight: 1980 kg Spare parts and accessories are available from us.

Condition: used, Collecting basket, collecting container, mower, lawn mower, cutter bar, disc mower -without fan -for side discharge Laedpfxjb Ig Uuo Affek -Dimensions: 1500/800/H1400 mm -Weight: 100 kg

Condition: new, Year of construction: 2024, Perfect Flail Mower KJ-150 For front mounting on farm or wheel loaders Including swivel wheels for depth control 1.50 m working width Hydraulic drive (return line + leakage line required) Laodpfx Aov Aqr Doffek With EURO adapter | Internal No.: 11212948

Condition: new, functionality: fully functional, power: 36.77 kW (49.99 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 3,520 kg, lifting power: 1.4 kg/m, lifting height: 2,538 mm, tire size: 20,5-70 R16, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, digging bucket width: 1,500 mm, Year of construction: 2025, fuel: diesel, load capacity: 1,400 kg, Equipment: additional headlights, all wheel drive, cabin, hydraulics, pallet forks, parking heater, soot filter, standard shovel, trailer coupling, H&R Loader 3514 – The powerful wheel loader for versatile applications Advantages of the H&R 3514 Articulated Loader Powerful engine: The Yunnei DEF20CFF4 50 hp engine delivers maximum performance with lower fuel consumption and complies with the Euro 5 emissions standard. Ledpfxjrkmfxj Affeak Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its weight and a lifting capacity of 1400 kg, the H&R Wheel Loader 3514 remains relatively maneuverable – ideal for tight construction sites and agricultural applications. Hydraulic quick coupler: The hydraulic quick coupler allows you to quickly and easily switch between various attachments, such as the standard bucket or the manually adjustable pallet fork. Expandable functions: Use the 3rd and 4th hydraulic control circuits to operate additional attachments such as mowers, bale grippers, snow plows, and much more. Comfortable cab for all-day use: The H&R 3514 wheel loader offers a spacious, air-conditioned comfort cab with an adjustable seat and steering column, diesel auxiliary heating, and rearview camera. This allows you to complete even longer jobs comfortably and safely. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives a comprehensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 3514 Wheel Loader • Fully equipped • Includes standard 150 cm bucket and pallet fork • Powerful and versatile – versatile • Compact design ensures good maneuverability • Comfortable cab with heating, ventilation, and a diesel auxiliary heater • Joystick with electric gearshift for precise control • Additional 3rd and 4th control circuits for attachments • LED work lights and windshield wipers for clear visibility in all weather conditions • Rearview camera with display • MP3 radio and USB port for entertainment while working • Ball-head trailer hitch with socket for additional trailer use • 220V coolant preheater for reliable cold start capability • Hour meter for monitoring operating times and maintenance intervals • CE compliant according to the EU Machinery Directive • Extensively optimized in Germany • 1-year spare parts warranty Price Net: €22,530.00 VAT: €4,280.70 Gross: €26,810.70 Financing available! Optional Road registration / operating permit: €480 Extended warranty (2 years): €590 Transportation in Germany and Austria: Upon request Technical details Engine: 4-cylinder Yunnei Engine power: 50 hp Emissions class: Euro 5 Lifting height: 2538 mm (bottom edge of standard pallet fork) Unloading height: 1950 mm (standard bucket tipped out) Lifting capacity: 1400 kg Wheelbase: 2200 mm Tires: 20.5-70 R16 Dimensions: 3870 x 1750 x 2570 mm Weight: 3520 kg Accessories and spare parts are available from us. Please provide your telephone number when making inquiries!

Condition: new, Year of construction: 2024, Perfect rear mulcher KP-180 Year of manufacture 2024, new machine without use Cat I + II attachment 28 HP power requirement 465 kg dead weight Lodpev Aqtnefx Affoak 18 flails (0.9 kg) including PTO shaft | Internal no.: 11212945

Condition: new, functionality: fully functional, power: 44.87 kW (61.01 HP), gearing type: automatic, fuel type: diesel, fuel tank capacity: 55 l, color: red, overall weight: 4,220 kg, lifting power: 1,800 kg/m, lifting height: 2,784 mm, tire condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, digging bucket width: 1,900 mm, Year of construction: 2025, load capacity: 1,800 kg, machine/vehicle number: H&R 3518, Equipment: additional headlights, all wheel drive, cabin, hydraulics, pallet forks, soot filter, standard shovel, trailer coupling, H&R Loader 3518 – The versatile farm loader for demanding tasks Advantages of the H&R 3518 Wheel Loader Powerful engine: The Yunnei DEF20CFF4 engine with 61 hp ensures maximum performance with lower fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its size, weight, and high lifting capacity, the H&R wheel loader is relatively maneuverable. Hydraulic quick coupler: With the hydraulic quick coupler, you can quickly and easily switch between different attachments. Expandable functions: Use the 3rd and 4th hydraulic control circuits to operate additional attachments such as mowers, bale grabs, snow plows, and much more. Comfortable cab for all-day use: The H&R wheel loader offers a spacious cab with an adjustable seat, diesel auxiliary heating, a rearview camera, heating, ventilation, and a radio with MP3 and USB. This allows you to complete even longer jobs comfortably and safely. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives a comprehensive rust protection treatment. Our wheel loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Lodpfx Aoul Ab Ssffoak Key Features of the H&R 3518 Farm Loader • Fully equipped • Extensively optimized in Germany • Powerful and versatile – versatile use • Compact design ensures high maneuverability despite its size • Comfortable cab with heating and ventilation as well as a diesel auxiliary heater • Joystick with electric gearshift for precise control • Additional 3rd and 4th control circuits for attachments • Rearview camera with display • LED work lights and windshield wipers for clear visibility in all weather conditions • MP3 radio and USB port for entertainment while working • Ball-head trailer hitch with socket for trailer use • 220V coolant preheating for reliable cold start capability and increased engine life. • Hour meter for monitoring operating times and maintenance intervals • Extensive rust protection treatment • CE compliant according to the EU Machinery Directive • Includes a 1-year spare parts warranty Price Net: €24,590.00 VAT: €4,672.10 Gross: €29,262.10 Financing available! Optional Road registration / operating permit: €480 Extended warranty (2 years): €590 Transportation in Germany and Austria: Upon request Technical details Engine: 4-cylinder Yunnei Engine power: 61 hp Emissions class: Euro 5 Lifting height: 2784 mm (bottom edge of standard pallet fork) Unloading height: 2279 mm (standard bucket tipped out) Lifting capacity: 1800 kg Wheelbase: 2280 mm Tires: 20.5-70 R17.5 Dimensions: 4050 x 1870 x 2570 mm Weight: 3850 kg Accessories and spare parts are available from us. Please provide your telephone number when making inquiries.

Condition: used, Year of construction: 2018, operating hours: 1 h, working width: 10,700 mm, Mower Bar: Disc | Claas Disco 1100 C Business Year of manufacture: 2018 Category III mounting Working width: 9.40 m to 10.70 m Transport width: 2.95 m Weight: 3,520 kg Load-sensing couplings ISOBUS control (Communicator II also included) Lajdpfow Hh Snsx Affjk Steel tine conditioner 9 discs per mower bar PTO shaft Wear skids Hydropneumatic suspension Internal ref. no.: 10844757

Condition: new, functionality: fully functional, power: 55.16 kW (75.00 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 4,920 kg, lifting height: 3,358 mm, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, digging bucket width: 2,000 mm, Year of construction: 2025, load capacity: 2,500 kg, Equipment: UVV, additional headlights, all wheel drive, cabin, head guard, hydraulics, pallet forks, parking heater, soot filter, standard shovel, trailer coupling, H&R Loader 5025 – Our heavyweight lifts loads up to 2.5 tons. The H&R Wheel Loader 5025 is your reliable all-rounder for demanding tasks in agriculture, construction, and industry. Advantages of the H&R 5025 Farm Loader Powerful engine: The Yunnei DEF20CAF4 engine with 75 hp ensures maximum performance with lower fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its size and weight, the H&R Wheel Loader 5025 is relatively maneuverable. Hydraulic quick coupler: The hydraulic quick coupler allows you to quickly and easily switch between different attachments. Expandable functions: Use the additional 3rd and 4th hydraulic control circuits to operate front-end tools such as mowers, bale grippers, snow plows, and much more. Comfortable cab for all-day use: The H&R wheel loader offers a spacious cab with an adjustable seat, diesel auxiliary heater, rearview camera, ventilation, and radio. This allows you to complete even longer jobs comfortably and safely. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives a comprehensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 5025 Wheel Loader • Fully equipped • Extensively optimized in Germany • Lifts heavy loads up to 2.5 tons at 3.35 meters • Includes standard bucket (200 cm) and pallet fork • Powerful and versatile – versatile • Well-thought-out design ensures high maneuverability despite its size • Comfortable cab with heating and ventilation, plus radio (MP3 and USB) • Joystick with electric gearshift for precise control • 3rd and 4th hydraulic control circuits for attachments • LED work lights and windshield wipers for clear visibility in all weather conditions • Rearview camera with display • Diesel auxiliary heater • Ball-head trailer hitch with socket for additional trailer use • 220V coolant preheater for reliable cold start capability and increased engine life • Hour meter for monitoring operating times and maintenance intervals • CE compliant according to the EU Machinery Directive • Includes 1 year warranty Spare parts warranty Price Net: €28,583.00 VAT: €5,430.77 Gross: €34,013.77 Financing available! Optional Road registration / operating permit: €480 Extended warranty (2 years): €590 Transportation in Germany and Austria: Upon request Technical details Engine: 4-cylinder Yunnei Engine power: 75 hp (55.8 kW) Emissions class: Euro 5 Lifting height: 3358 mm (bottom edge of standard pallet fork) Unloading height: 2692 mm (standard bucket tipped out) Lifting capacity: 2500 kg Wheelbase: 2550 mm Tires: 16-70 R20 Lsdeu Dyl Tspfx Affeak Dimensions: 5370 x 2080 x 2650 mm Weight: 4920 kg Accessories and spare parts are available from us. Please provide your telephone number when making inquiries!

Condition: new, functionality: fully functional, power: 18.8 kW (25.56 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 2,740 kg, lifting height: 3,283 mm, tire size: 31x15,5x15 AS, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, Year of construction: 2025, fuel: diesel, Equipment: additional headlights, adjustable boom, all wheel drive, cabin, head guard, pallet forks, standard shovel, H&R Telehandler 2512T – The compact wheel loader for versatile applications with an enclosed cab for greater comfort. Advantages of the H&R Wheel Loader 2512T Powerful engine: The Yunnei DEF20CFF4 4-cylinder engine with 25 hp delivers high performance with low fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its weight and a lifting capacity of 1200 kg, the H&R wheel loader has a relatively small turning circle. Hydraulic quick coupler: With the hydraulic quick coupler, you can quickly and easily switch between different attachments, such as the standard bucket or the manually adjustable pallet fork. Expandable functions: Use the additional hydraulic control circuit to operate additional attachments such as mowers, bale grippers, snow plows, and much more. H&R loaders are technically and visually optimized in-house and thoroughly tested. Additionally, each machine receives extensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 2512T Telehandler • Fully equipped • Extensively optimized in Germany • Telescopic boom for a greater reach • Includes standard shovel (160 cm) and pallet fork • Powerful and versatile - versatile • Compact design ensures high maneuverability • Comfortable cab with heating, ventilation, and radio (MP3 and USB) for extended working hours • Joystick with electric gearshift for precise control • Additional control circuit for attachments such as mowers, bale grabs, snow plows, etc. • LED work lights and windshield wipers for clear visibility in all weather conditions • MP3 radio and USB port for entertainment while working • Rearview camera with display in the interior • Trailer hitch for additional trailer use • 220V cooling water preheater for reliable cold start capability and increased engine life • Hour meter for monitoring operating times and ensuring optimal compliance with maintenance intervals • Ideal for agriculture and construction and industry • CE-compliant according to the EU Machinery Directive • 1-year spare parts warranty Price Net: €21,845.00 VAT: €4,150.00 Gross: €25,995.00 Financing available! Optional Road registration / operating permit: €595 Extended warranty (2 years): €590 Transportation in Germany and Austria: Upon request Technical details Engine: 4-cylinder Yunnei DEF20CFF4 Engine power: 25 hp (18.8 kW) Emissions class: Euro 5 Lifting capacity: 1200 kg Lifting height: 3283 mm (bottom edge of standard pallet fork) Unloading height: 2753 mm (standard bucket tipped) Lifting capacity: 1200 kg Wheelbase: 2.17 m Tires: 31×15.5-15 AS Dimensions: 3850 x 1610 x 2460 mm Weight: 2740 kg Accessories and spare parts are available from us. Ljdpfxsrhgn Se Affjak Please provide your telephone number when making inquiries.

Condition: new, functionality: fully functional, power: 55.9 kW (76.00 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 4,960 kg, lifting power: 2,500 kg/m, lifting height: 4,452 mm, tire size: 16-70 R20, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, mast type: telescopic, digging bucket width: 2,000 mm, Year of construction: 2025, fuel: diesel, load capacity: 2,500 kg, Equipment: additional headlights, adjustable boom, all wheel drive, cabin, hydraulics, pallet forks, parking heater, soot filter, standard shovel, trailer coupling, H&R Telehandler 5025T – Your reliable wheel loader for demanding tasks in agriculture, construction, and industry. Advantages of the H&R 5025T Telehandler Powerful engine: The Yunnei DEF20CAF4 engine with 75 hp ensures maximum performance with lower fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its size and weight, the HR Wheel Loader 5025T is relatively maneuverable. Hydraulic quick coupler: With the hydraulic quick coupler, you can quickly and easily switch between different attachments. Expandable functions: Use the additional hydraulic control circuit to operate front-end tools such as mowers, bale grabs, snow plows, and much more. Comfortable cab for all-day use: The H&R wheel loader offers a spacious cab with an adjustable seat, diesel auxiliary heating, rearview camera, ventilation, and radio. This allows you to complete even longer jobs comfortably and safely. Laodpfxsrgq Eto Affok H&R loaders are technically and visually optimized in-house and thoroughly tested. Additionally, each machine receives extensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 5025T Telehandler • Fully equipped • Extensively optimized in Germany • Telescopic boom increases the working reach • Lifts heavy loads up to 2.5 tons to a height of 4.45 meters (bottom edge of standard pallet forks) • Includes standard bucket (200 cm) and pallet forks • Powerful and powerful - versatile • Well-thought-out design ensures high maneuverability despite its size • Comfortable cab with heating and ventilation, plus radio (MP3 and USB) • Rearview camera with display • Diesel auxiliary heater • Joystick with electric gearshift for precise control • Additional hydraulic control circuit for attachments • LED work lights and windshield wipers for clear visibility in all weather conditions • Ball-head trailer hitch with socket for additional trailer use • 220V coolant preheater for reliable cold start capability and increased engine life • Hour meter for monitoring operating times and maintenance intervals • CE compliant according to the EU Machinery Directive • Includes a 1-year spare parts warranty Price Net: €32,690.00 VAT: €6,211.10 Gross: €38,901.10 Financing available! Optional Road approval available. Delivery available. Technical Details Engine: 4-cylinder Yunnei Engine power: 75 hp (55.8 kW) Emissions class: Euro 5 Lifting height: 4452 mm (bottom edge of standard pallet fork) Unloading height: 3780 mm (bottom edge of standard bucket, tipped out) Lifting capacity: 2500 kg Wheelbase: 2550 mm Tires: 16-70 R20 Dimensions: 5270 x 2080 x 2650 mm Weight: 4960 kg Accessories and spare parts are available from us. Please provide your telephone number when making inquiries!

Condition: new, functionality: fully functional, power: 36.77 kW (49.99 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 4,050 kg, lifting height: 4,200 mm, tire size: 20,5-70 R16, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, emission class: euro5, mast type: telescopic, digging bucket width: 1,500 mm, Year of construction: 2025, fuel: diesel, load capacity: 1,400 kg, Equipment: additional headlights, adjustable boom, all wheel drive, cabin, head guard, hydraulics, low noise, parking heater, soot filter, standard shovel, trailer coupling, H&R Telehandler 3514T – The powerful telehandler for versatile applications Advantages of the H&R Wheel Loader 3514T Extended working range: Thanks to the telescopic boom, the loader can lift loads of up to 1.4 tons to a height of up to 4.4 meters. Powerful engine: The Yunnei DEF20CFF4 50 hp engine ensures maximum performance with lower fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its weight and a lifting capacity of 1400 kg, the H&R Wheel Loader 3514 remains relatively maneuverable – ideal for tight construction sites and agricultural applications. Hydraulic quick coupler: With the hydraulic quick coupler, you can quickly and easily switch between different attachments, such as the standard bucket or the manually adjustable pallet fork. Expandable functions: Use the 4th hydraulic control circuit to operate additional attachments such as mowers, bale grabs, snow plows, and much more. Comfortable cab for all-day use: The H&R Loader 3514T offers a spacious, air-conditioned comfort cab with an adjustable seat, diesel auxiliary heating, and rearview camera. This allows you to carry out even longer jobs comfortably and safely. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives a comprehensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 3514T • Fully equipped • Extended reach thanks to telescopic boom • Extensively optimized in Germany • Powerful and versatile - versatile • Compact design ensures good maneuverability • Comfortable cab with heating and ventilation as well as a diesel auxiliary heater • Rearview camera with display • Adjustable steering column and seat • Joystick with electric gearshift for precise control • Additional control circuit for attachments • LED work lights and windshield wipers for clear visibility in all weather conditions • MP3 radio and USB port for entertainment while working • Ball-head trailer hitch with socket for additional trailer use • 220V coolant preheater for reliable cold start capability • Hour meter for monitoring operating times and maintenance intervals • CE compliant according to the EU Machinery Directive • 1-year spare parts warranty Price Net: €26,160.00 VAT: €4,970.40 Gross: €31,130.40 Optional Road registration / operating permit: €480 Extended warranty (2 years): €590 Transportation in Germany and Austria: Upon request Technical details Engine: 4-cylinder Yunnei Engine power: 50 hp (36.8 kW) Emissions class: Euro 5 Lifting capacity: 1400 kg Lift height: 4401 mm (bottom edge of standard pallet fork) Unloading height: 3373 mm (bottom edge of standard bucket, tipped out) Wheelbase: 255 mm Tires: 20.5-70 R16 Dimensions: 5210 x 1690 x 2560 mm Weight: 4050 kg Accessories and spare parts are available from us. Ljdpfx Ajrdhx Teffoak Please provide your telephone number when making inquiries!

Condition: new, functionality: fully functional, power: 45 kW (61.18 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 4,000 kg, lifting height: 4,095 mm, tire condition: 100 %, axle configuration: 2 axles, number of seats: 1, digging bucket width: 1,900 mm, Year of construction: 2025, load capacity: 1,800 kg, Equipment: additional headlights, adjustable boom, all wheel drive, cabin, hydraulics, pallet forks, parking heater, soot filter, standard shovel, trailer coupling, H&R Telehandler 3518T – the versatile farm loader with a telescopic boom for demanding tasks Benefits of the H&R 3518T Wheel Loader with a telescopic boom Powerful engine: The Yunnei DEF20CFF4 50 hp engine delivers maximum performance with lower fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its size and weight, the H&R wheel loader is relatively maneuverable. Hydraulic quick coupler: With the hydraulic quick coupler, you can quickly and easily switch between various attachments, such as the standard bucket or the manually adjustable pallet fork. Expandable functions: Use the 4th hydraulic control circuit to operate additional attachments such as mowers, bale grabs, snow plows, and much more. Comfortable cab for all-day use: The H&R wheel loader offers a spacious cab with an adjustable seat, diesel auxiliary heating, and a rearview camera, as well as heating and ventilation. This allows you to complete even longer jobs comfortably and safely. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives extensive rust protection. Our wheel loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 3518T Telehandler • Fully equipped • Extendable telescopic arm for greater reach • Includes standard shovel (190 cm) and pallet fork • Powerful and versatile • Compact design ensures high maneuverability despite its size • Comfortable cab with heating and ventilation • Joystick with electric gearshift for precise control • Additional control circuit for attachments • LED work lights and windshield wipers for clear visibility in all weather conditions • Rearview camera with display • MP3 radio and USB port for entertainment while working • Ball-head trailer hitch with socket for additional trailer use • 220V cooling water preheating for reliable cold start capability and increased engine life. • Hour meter for monitoring operating times and maintenance intervals • CE compliant according to the EU Machinery Directive • Extensively optimized in Germany • 1-year spare parts warranty Price Net: €28,660.00 VAT: €5,445.40 Gross: €34,105.40 Financing available! Optional Road registration / operating permit: €480 Extended warranty (2 years): €590 Transportation in Germany and Austria: Upon request Technical details Engine: 4-cylinder Yunnei Engine power: 61 hp Emissions class: Euro 5 Lifting capacity: 1800 kg Lift height: 4095 mm (bottom edge of standard pallet fork) Unloading height: 3451 mm (standard bucket tipped out) Wheelbase: 2272 mm Tires: 20.5-70 R16 Dimensions: 4890 x 1870 x 2570 mm Weight: 4220 kg Accessories and spare parts are available from us. Lasdpfxjulac Tj Affjk Please provide your telephone number when making inquiries!