Used Flail Mower for sale (136)

Condition: used, Year of construction: 2023, operating hours: 1 h, MULAG Combination Mowing Device MKF 600 for Mounting on Unimog Mowing combination MKF600 consisting of: - Front boom mower MFK 500 - Verge mower MRF Base unit for single or dual-operator use, designed for front mounting plate size 5 with the following specification: Equipment Front Boom Mower MFK 500 * Designed for right-hand operation * Boom swivel range: 190 degrees * Hydraulically actuated collision protection with damping of the boom system via hydraulic accumulators * Hydraulic lateral shift of the boom by 1300 mm (in combination operation) / 1800 mm (in solo operation) * Float position of mowing units can be switched on/off * Quick-change device for mowing units * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve * Operating hours counter * Proportional mlcontrol permanent hydraulics included * (CAN bus technology) for the boom, including dual-cylinder actuation (multiple functions may be performed simultaneously) * Boom relief regulation type AER with stepless ground pressure adjustment via potentiometer, can be switched on/off * Operator information system with TFT color display, including system monitoring and diagnostic support * Multifunction lever mlbasic single-handed control unit with multifunction lever (ergonomically designed for right hand use, 4 functions on one plane. All functions are proportionally controllable) * Combination control panel * Control of both units via multifunction control lever * Oil cooling system with electric temperature monitoring included * Tool drive via front PTO * Hydraulic pump for 1st implement drive 62l / 340 bar * Hydraulic pump for 2nd implement drive 50l / 280 bar * Filled with Panolin HLP Synth, fully synthetic, rapidly biodegradable hydraulic oil * Telescopic boom system hydraulic adjustment for extending reach by 1,000 mm * Reach 6.50 m from vehicle center in combination operation * Reach 7.00 m from vehicle center in solo operation * 2-way electro-hydraulic switching valve controlled from operator panel (additional hydraulic dual functions) * Hydraulic rotation device for mowing implements, swivel range of 230°, operable from control panel. Boom side integrated, including quick-change plate * Hydraulic couplings: Quick coupling kit for flat-sealing quick couplers on mower * Cable set ES6 Front Unimog Connection of operator panel via universal electrical interface ES6 of Unimog Hfsdpfx Agox R Uw Sj Een * Hydraulic stabilizer legs included, 2 pieces, height adjustable * LED work lights, 2 pieces, mounted on boom * High-pressure water hose routing on boom Verge Mower MRF 350 consisting of the following configuration: Verge Mower MRF 350 * For right-hand operation * Reach 3.50 m from vehicle center * Hydraulic lateral adjustment of verge mower by 1000 mm (in combination operation) * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve (knife shaft overrun limited to approx. 4 seconds) * Operating hours counter * Sensing automatic: control of the mowing head around obstacles. Mowing speed adjustment for evasive movement is steplessly adjustable by the operator at the control panel. * Single-hand operation unit with holder in Unimog Verge Mowing Head RMK 1200 * Working width: 1200 mm, Cutting thickness: max. 10 mm * MS-R blade * Knife shaft speed: approx. 3000 rpm * Standard sensing arm Mowing Head MK 1200 plus * Working width: 1200 mm, Cutting thickness:

Year of construction: 2025, condition: as good as new (ex-display), Thanks to the AULUMA EXACT, all common double-knife and standard knife blades as well as hedge trimmers can be resharpened quickly and efficiently in highest quality. Width 3m (maximum blade length in one clamping 2.4m). Versatile Adjustment and Infinitely Variable Grinding Angle This enables grinding of all common types of knives. The knife is fixed clamped and does not need to be adjusted again. The grinding angles of 2 knives may be preselected and changed by means of a quick change switch. The angles can be easily read off via scales. The grinding depth can also be adjusted infinitely. Precise Guidance of the Grinding Machine Thanks to the predefined motion sequences, a constant, uniform grinding can be achieved very quickly. The blades maintain their straight shape – whereas freehand sharpening will damage the knives over time as they lose their shape. Zero-backlash Movements Due to Special Rollers with Ball Bearings Due to the special and robust design, there is almost no wear. The rollers and guides are galvanized and fit together perfectly – allowing for easy and zero-backlash movements. Incl. High-quality Angle Grinder From BOSCH and Special Grinding Wheel The variable speed angle grinder can be easily disassembled and thus used for other purposes. The special ceramic grinding wheel helps to avoid burning of the blades. Hodjgvvxrepfx Ag Ejfn

Condition: used, functionality: fully functional, power: 18 kW (24.47 HP), overall weight: 1,600 kg, fuel type: diesel, color: green, axle configuration: 4x4, maximum load weight: 500 kg, empty load weight: 1,100 kg, fuel: diesel, gearing type: hydrostat, suspension: steel, Year of construction: 2018, operating hours: 1,041 h, Ride-on mower: + Amazone + PH 1250 Profihopper 4WDi + Year of manufacture: 2018 + 1,410 operating hours + Flashing beacon + 4-cylinder Kohler diesel engine, 24 hp, 1028cc + All-wheel drive + Hydrostatic transmission (max. speed 12 km/h) + Rear-wheel steering + Lighting + High-dump function + Conveyor auger + Mulcher with feeler wheels & Y-hammers Hodpfxoz Eq Rfe Ag Eofn + 2775mm x 1482mm x 1994mm (l x w x h) + Unladen weight: 1,100 kg; permissible gross weight: 1,600 kg + Municipal equipment, from first owner Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: used, functionality: fully functional, power: 17 kW (23.11 HP), overall weight: 1,140 kg, fuel type: gasoline, color: white, axle configuration: 2 axles, operation weight: 636 kg, empty load weight: 636 kg, fuel: regular/benzine 91, gearing type: hydrostat, Year of construction: 2016, operating hours: 760 h, Equipment: additional headlights, all wheel drive, Mulching mower: + Etesia + Buffalo HVHPX + Year of manufacture: 2016 + 760 operating hours + All-wheel drive + Lighting Hfjdpfx Agsymynaj Esn + Amber beacon + Hydrostatic drive + Height-adjustable mower deck, 124 cm cutting width + Mulching kit with deflector hood + High discharge up to 180 cm + Vanguard petrol engine, 627cc; 23 HP + Unladen weight: 636 kg; permissible GVW: 1,140 kg + Battery isolation switch + Area performance: 15,000 m²/h + From municipal ownership Receive all newly listed vehicles via email – subscribe to our NEWSLETTER! Errors and typing mistakes possible, subject to prior sale!

Condition: new, functionality: fully functional, Year of construction: 2025, working width: 5,000 mm, color: black, Equipment: lighting, Boom mower for tractors with a power output from 33 kW (45 hp), category II three-point linkage, and a minimum weight of 2100 kg. Driven via PTO shaft at 540 rpm. - Maximum horizontal reach: 5.00 m - Tractor-independent hydraulic system (46 l/min, 210 bar) incl. PTO shaft - Hydraulic collision protection - Hydraulic boom rotation - Floating position for boom - Floating position for mower rotor - Stabilization kit for three-point linkage - Electric proportional control with single joystick NEW machine, year of manufacture 2025 Hedpfxex R Ul Ne Ag Eefn

Condition: used, functionality: fully functional, empty load weight: 542 kg, Mower: + Stensballe + GMR TH3000C + hydraulically driven + side mowers foldable (transport width 200cm) + working width 300cm + 542kg + 5 blades + three-point linkage + 31kW required tractor power + from municipal ownership Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale! Hfsdpfxez Nx I Us Ag Eon

Condition: good (used), For lawn tractors, ride-on mowers, lawn mowers, lawn tractors, mower decks, lawn mowers, cutter bars, disc mowers -Lawnmower blades: 48 pieces Types: different Hfedpob A R Uhofx Ag Eon -Package: complete -Price: complete -Weight: 120 kg

Condition: new, functionality: fully functional, power: 55.9 kW (76.00 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 4,960 kg, lifting power: 2,500 kg/m, lifting height: 4,452 mm, tire size: 16-70 R20, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, mast type: telescopic, digging bucket width: 2,000 mm, Year of construction: 2025, fuel: diesel, load capacity: 2,500 kg, Equipment: additional headlights, adjustable boom, all wheel drive, cabin, hydraulics, pallet forks, parking heater, soot filter, standard shovel, trailer coupling, H&R Telehandler 5025T – Your reliable wheel loader for demanding tasks in agriculture, construction, and industry. Advantages of the H&R 5025T Telehandler Powerful engine: The Yunnei DEF20CAF4 engine with 75 hp ensures maximum performance with lower fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its size and weight, the HR Wheel Loader 5025T is relatively maneuverable. Hydraulic quick coupler: With the hydraulic quick coupler, you can quickly and easily switch between different attachments. Expandable functions: Use the additional hydraulic control circuit to operate front-end tools such as mowers, bale grabs, snow plows, and much more. Comfortable cab for all-day use: The H&R wheel loader offers a spacious cab with an adjustable seat, diesel auxiliary heating, rearview camera, ventilation, and radio. This allows you to complete even longer jobs comfortably and safely. H&R loaders are technically and visually optimized in-house and thoroughly tested. Additionally, each machine receives extensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 5025T Telehandler • Fully equipped • Extensively optimized in Germany Hfodpfx Asrgq Eteg Een • Telescopic boom increases the working reach • Lifts heavy loads up to 2.5 tons to a height of 4.45 meters (bottom edge of standard pallet forks) • Includes standard bucket (200 cm) and pallet forks • Powerful and powerful - versatile • Well-thought-out design ensures high maneuverability despite its size • Comfortable cab with heating and ventilation, plus radio (MP3 and USB) • Rearview camera with display • Diesel auxiliary heater • Joystick with electric gearshift for precise control • Additional hydraulic control circuit for attachments • LED work lights and windshield wipers for clear visibility in all weather conditions • Ball-head trailer hitch with socket for additional trailer use • 220V coolant preheater for reliable cold start capability and increased engine life • Hour meter for monitoring operating times and maintenance intervals • CE compliant according to the EU Machinery Directive • Includes a 1-year spare parts warranty Price Net: €32,690.00 VAT: €6,211.10 Gross: €38,901.10 Financing available! Optional Road approval available. Delivery available. Technical Details Engine: 4-cylinder Yunnei Engine power: 75 hp (55.8 kW) Emissions class: Euro 5 Lifting height: 4452 mm (bottom edge of standard pallet fork) Unloading height: 3780 mm (bottom edge of standard bucket, tipped out) Lifting capacity: 2500 kg Wheelbase: 2550 mm Tires: 16-70 R20 Dimensions: 5270 x 2080 x 2650 mm Weight: 4960 kg Accessories and spare parts are available from us. Please provide your telephone number when making inquiries!

Condition: new, functionality: fully functional, power: 36.77 kW (49.99 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 4,050 kg, lifting height: 4,200 mm, tire size: 20,5-70 R16, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, emission class: euro5, mast type: telescopic, digging bucket width: 1,500 mm, Year of construction: 2025, fuel: diesel, load capacity: 1,400 kg, Equipment: additional headlights, adjustable boom, all wheel drive, cabin, head guard, hydraulics, low noise, parking heater, soot filter, standard shovel, trailer coupling, H&R Telehandler 3514T – The powerful telehandler for versatile applications Advantages of the H&R Wheel Loader 3514T Extended working range: Thanks to the telescopic boom, the loader can lift loads of up to 1.4 tons to a height of up to 4.4 meters. Powerful engine: The Yunnei DEF20CFF4 50 hp engine ensures maximum performance with lower fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its weight and a lifting capacity of 1400 kg, the H&R Wheel Loader 3514 remains relatively maneuverable – ideal for tight construction sites and agricultural applications. Hydraulic quick coupler: With the hydraulic quick coupler, you can quickly and easily switch between different attachments, such as the standard bucket or the manually adjustable pallet fork. Expandable functions: Use the 4th hydraulic control circuit to operate additional attachments such as mowers, bale grabs, snow plows, and much more. Comfortable cab for all-day use: The H&R Loader 3514T offers a spacious, air-conditioned comfort cab with an adjustable seat, diesel auxiliary heating, and rearview camera. This allows you to carry out even longer jobs comfortably and safely. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives a comprehensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 3514T • Fully equipped • Extended reach thanks to telescopic boom • Extensively optimized in Germany • Powerful and versatile - versatile • Compact design ensures good maneuverability • Comfortable cab with heating and ventilation as well as a diesel auxiliary heater • Rearview camera with display • Adjustable steering column and seat • Joystick with electric gearshift for precise control • Additional control circuit for attachments • LED work lights and windshield wipers for clear visibility in all weather conditions • MP3 radio and USB port for entertainment while working Hfsdpjrdhx Tsfx Ag Eon • Ball-head trailer hitch with socket for additional trailer use • 220V coolant preheater for reliable cold start capability • Hour meter for monitoring operating times and maintenance intervals • CE compliant according to the EU Machinery Directive • 1-year spare parts warranty Price Net: €26,160.00 VAT: €4,970.40 Gross: €31,130.40 Optional Road registration / operating permit: €480 Extended warranty (2 years): €590 Transportation in Germany and Austria: Upon request Technical details Engine: 4-cylinder Yunnei Engine power: 50 hp (36.8 kW) Emissions class: Euro 5 Lifting capacity: 1400 kg Lift height: 4401 mm (bottom edge of standard pallet fork) Unloading height: 3373 mm (bottom edge of standard bucket, tipped out) Wheelbase: 255 mm Tires: 20.5-70 R16 Dimensions: 5210 x 1690 x 2560 mm Weight: 4050 kg Accessories and spare parts are available from us. Please provide your telephone number when making inquiries!

Condition: new, functionality: fully functional, Year of construction: 2024, working width: 73,000 mm, color: green, machine/vehicle number: S241645, Equipment: hydraulic folding, lighting, SPEARHEAD 730 STUBBLEMASTER Trailed Rotary Mower If you need to work more hectares, opt for a machine with a 7.3-meter working width. The 730 features the same special design as the 500, complete with a powerful 165 hp (123 kW) transmission. Larger farmers and contractors appreciate the five rotors. Each rotor is equipped with three straight and three angled blades, delivering the renowned double cut of the Stubble Master. This accelerates residue breakdown and improves soil structure. The monocoque deck design prevents dirt buildup, while the adjustable cutting height allows mowing just a few centimeters above the ground. Five rotors cover 7.3 meters in a single pass. Hsdpfx Aoxlf N Seg Esfn Easy to clean thanks to the monocoque design. Precisely set your cutting height for maximum performance.

Condition: used, mileage: 185,705 km, power: 130 kW (176.75 HP), first registration: 10/2016, fuel type: diesel, empty load weight: 3,710 kg, maximum load weight: 3,780 kg, overall weight: 7,490 kg, axle configuration: 4x2, wheelbase: 3,000 mm, brakes: engine braking, driver cabin: other, gearing type: automatic, emission class: euro6, number of seats: 2, loading space length: 4,000 mm, loading space width: 2,500 mm, loading space height: 2,400 mm, Equipment: ABS, cabin, central locking, crane, cruise control, differential lock, onboard computer, parking heater, traction control, trailer coupling, * German vehicle * Condition: see photos * First owner * Only 185,705 kilometers * Sortimo workshop and shelving system * 300 kg load capacity with cable remote control * Loading platform crane with cable winch * MobiE generator in the box * Type MB 400-16 * ZeBu box body with side door * Rear portal doors with sliding staircase * Side door with staircase Hodsz Eixzjpfx Ag Ejfn * Loading platform crane with Powerwinch cable winch * 350 kg load capacity * Cable remote control * Box dimensions: length 4.00 m x 2.50 m x 2.40 m * Wooden loading floor with load securing rails * DIN lashing eyes * LED interior lighting * Tow hitch * Trailer load 10,510 kg * Total weight 18,000 kg * Tow hitch ball head * Trailer load 3,400 kg * Cab with 2 seats * Air-suspended comfort seat * Seat heating * Auxiliary heater * Electric windows * Electric mirrors * Lane keeping assist system * Telephone Bluetooth * Leaf spring suspension * Wheelbase 3.00 m * Permissible total weight 7,490 kg * Unladen weight 3,710 kg * Payload 3,780 kg If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does NOT include a new TÜV inspection, a new DGUV inspection, a new SP inspection, or a new UVV inspection. You can find more trucks on our website under: We speak the following languages: German, English, Polish, Turkish Note: We strongly recommend and offer a viewing and inspection of the goods so that no false impressions arise regarding the condition and suitability for the buyer. Viewings and inspections are possible at any time by prior appointment and are expressly desired. All information is provided without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale and errors.

Condition: new, functionality: fully functional, power: 36.77 kW (49.99 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 3,520 kg, lifting power: 1.4 kg/m, lifting height: 2,538 mm, tire size: 20,5-70 R16, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, digging bucket width: 1,500 mm, Year of construction: 2025, fuel: diesel, load capacity: 1,400 kg, Equipment: additional headlights, all wheel drive, cabin, hydraulics, pallet forks, parking heater, soot filter, standard shovel, trailer coupling, H&R Loader 3514 – The powerful wheel loader for versatile applications Advantages of the H&R 3514 Articulated Loader Powerful engine: The Yunnei DEF20CFF4 50 hp engine delivers maximum performance with lower fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its weight and a lifting capacity of 1400 kg, the H&R Wheel Loader 3514 remains relatively maneuverable – ideal for tight construction sites and agricultural applications. Hydraulic quick coupler: The hydraulic quick coupler allows you to quickly and easily switch between various attachments, such as the standard bucket or the manually adjustable pallet fork. Expandable functions: Use the 3rd and 4th hydraulic control circuits to operate additional attachments such as mowers, bale grippers, snow plows, and much more. Hfjdperkmfxefx Ag Een Comfortable cab for all-day use: The H&R 3514 wheel loader offers a spacious, air-conditioned comfort cab with an adjustable seat and steering column, diesel auxiliary heating, and rearview camera. This allows you to complete even longer jobs comfortably and safely. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives a comprehensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 3514 Wheel Loader • Fully equipped • Includes standard 150 cm bucket and pallet fork • Powerful and versatile – versatile • Compact design ensures good maneuverability • Comfortable cab with heating, ventilation, and a diesel auxiliary heater • Joystick with electric gearshift for precise control • Additional 3rd and 4th control circuits for attachments • LED work lights and windshield wipers for clear visibility in all weather conditions • Rearview camera with display • MP3 radio and USB port for entertainment while working • Ball-head trailer hitch with socket for additional trailer use • 220V coolant preheater for reliable cold start capability • Hour meter for monitoring operating times and maintenance intervals • CE compliant according to the EU Machinery Directive • Extensively optimized in Germany • 1-year spare parts warranty Price Net: €22,530.00 VAT: €4,280.70 Gross: €26,810.70 Financing available! Optional Road registration / operating permit: €480 Extended warranty (2 years): €590 Transportation in Germany and Austria: Upon request Technical details Engine: 4-cylinder Yunnei Engine power: 50 hp Emissions class: Euro 5 Lifting height: 2538 mm (bottom edge of standard pallet fork) Unloading height: 1950 mm (standard bucket tipped out) Lifting capacity: 1400 kg Wheelbase: 2200 mm Tires: 20.5-70 R16 Dimensions: 3870 x 1750 x 2570 mm Weight: 3520 kg Accessories and spare parts are available from us. Please provide your telephone number when making inquiries!

Condition: new, empty load weight: 270 kg, maximum load weight: 480 kg, overall weight: 750 kg, loading space length: 2,400 mm, loading space width: 1,260 mm, loading space height: 1,500 mm, tire size: 165/70R13, Drop-down trailer with tarpaulin body from trailer manufacturer VEZEKO, model HUSKY F08.25-HOBBY. Motorcycles can be easily loaded with a lowerable car trailer. The platform is raised using the standard hand hydraulics. The platform is lowered by opening the valve on the hand pump. This makes it easy to drive small machines, lawn mowers, motorcycles, pallets, quads or ATVs up the minimal incline. The Senkomat is equipped as standard with hand hydraulics, tarpaulin and frame, lashing eyes, support wheel, sturdy welded frame, hot-dip galvanized and a very stable tubular drawbar. Hfsdpfsq Npa Nox Ag Esn A lowering lift trailer is also available as a tarpaulin trailer or box trailer. As trailer accessories, we offer motorcycle rockers, motorcycle stand rails, tarpaulin & frame, side wall attachment, motorcycle lashing straps, lashing straps, TÜV for 100 km/h and anti-theft device.

Condition: new, functionality: fully functional, power: 18.8 kW (25.56 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 2,740 kg, lifting height: 3,283 mm, tire size: 31x15,5x15 AS, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, Year of construction: 2025, fuel: diesel, Equipment: additional headlights, adjustable boom, all wheel drive, cabin, head guard, pallet forks, standard shovel, H&R Telehandler 2512T – The compact wheel loader for versatile applications with an enclosed cab for greater comfort. Advantages of the H&R Wheel Loader 2512T Powerful engine: The Yunnei DEF20CFF4 4-cylinder engine with 25 hp delivers high performance with low fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its weight and a lifting capacity of 1200 kg, the H&R wheel loader has a relatively small turning circle. Hydraulic quick coupler: With the hydraulic quick coupler, you can quickly and easily switch between different attachments, such as the standard bucket or the manually adjustable pallet fork. Expandable functions: Use the additional hydraulic control circuit to operate additional attachments such as mowers, bale grippers, snow plows, and much more. H&R loaders are technically and visually optimized in-house and thoroughly tested. Additionally, each machine receives extensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Hjdpfxorhgn Ss Ag Eofn Key Features of the H&R 2512T Telehandler • Fully equipped • Extensively optimized in Germany • Telescopic boom for a greater reach • Includes standard shovel (160 cm) and pallet fork • Powerful and versatile - versatile • Compact design ensures high maneuverability • Comfortable cab with heating, ventilation, and radio (MP3 and USB) for extended working hours • Joystick with electric gearshift for precise control • Additional control circuit for attachments such as mowers, bale grabs, snow plows, etc. • LED work lights and windshield wipers for clear visibility in all weather conditions • MP3 radio and USB port for entertainment while working • Rearview camera with display in the interior • Trailer hitch for additional trailer use • 220V cooling water preheater for reliable cold start capability and increased engine life • Hour meter for monitoring operating times and ensuring optimal compliance with maintenance intervals • Ideal for agriculture and construction and industry • CE-compliant according to the EU Machinery Directive • 1-year spare parts warranty Price Net: €21,845.00 VAT: €4,150.00 Gross: €25,995.00 Financing available! Optional Road registration / operating permit: €595 Extended warranty (2 years): €590 Transportation in Germany and Austria: Upon request Technical details Engine: 4-cylinder Yunnei DEF20CFF4 Engine power: 25 hp (18.8 kW) Emissions class: Euro 5 Lifting capacity: 1200 kg Lifting height: 3283 mm (bottom edge of standard pallet fork) Unloading height: 2753 mm (standard bucket tipped) Lifting capacity: 1200 kg Wheelbase: 2.17 m Tires: 31×15.5-15 AS Dimensions: 3850 x 1610 x 2460 mm Weight: 2740 kg Accessories and spare parts are available from us. Please provide your telephone number when making inquiries.

Condition: new, empty load weight: 270 kg, maximum load weight: 480 kg, overall weight: 750 kg, loading space length: 2,400 mm, loading space width: 1,260 mm, loading space height: 100 mm, tire size: 165/70R13, Drop-down trailer from trailer manufacturer VEZEKO model HUSKY F08.25-HOBBY. Motorcycles can be easily loaded with a lowerable car trailer. The platform is raised using the standard hand hydraulics. The platform is lowered by opening the valve on the hand pump. This makes it easy to drive small machines, lawn mowers, motorcycles, pallets, quads or ATVs up the minimal incline. The Senkomat is equipped as standard with hand hydraulics, lashing eyes, support wheel, sturdy welded frame, hot-dip galvanized and a very stable tubular drawbar. A lowering lift trailer is also available as a tarpaulin trailer or box trailer. Hfodpjq Ttzzsfx Ag Eon As trailer accessories, we offer motorcycle rockers, motorcycle stand rails, tarpaulin & frame, side wall attachment, motorcycle lashing straps, lashing straps, TÜV for 100 km/h and anti-theft device.

Condition: new, empty load weight: 860 kg, maximum load weight: 2,640 kg, overall weight: 3,500 kg, loading space length: 3,550 mm, loading space width: 200 mm, loading space height: 1,690 mm, tire size: 195/50r13c, *Low loader *construction machinery transporter tandem *for construction machinery, excavators, platforms, scissor lifts and many other vehicles. Hapert builds extremely stable *car trailers* such as this INDIGO LF-2 355x169cm. The *construction machinery trailer* is easy to load via a very stable lattice access flap. An absolute *universal trailer* not only for construction equipment but also for transporting lawn mowers, tractors, bulk goods and small vehicles. Full-length and accessible wheel arches make it easier to get out of a wheel loader. Here, the driver no longer damages the mudguard of the *car trailer*. The *machine transporter* is equipped with a stable lattice flap, parabolic suspension, automatic support wheel, accessible wheel arches, extremely stable welded and hot-dip galvanized frame and V-drawbar. We also offer accessories for machine transport trailers such as bucket storage, aluminum floor, tarpaulin with frame, lashing straps and anti-theft devices at a reasonable price. Hfedpfx Aon E Rm Ejg Eon

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 2,470 kg, lifting power: 1,200 kg/m, lifting height: 2,489 mm, tire size: 31x 15,5 - 15 AS, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, first registration: 04/2025, emission class: euro5, digging bucket width: 1,600 mm, Year of construction: 2025, Equipment: additional headlights, all wheel drive, cabin, head guard, hydraulics, pallet forks, standard shovel, trailer coupling, H&R 2412 – The compact wheel loader for versatile applications with an open cab Advantages of the H&R 2412 loader Powerful engine: The Yunnei DEF20CFF4 4-cylinder engine with 25 hp delivers high performance with low fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its high weight and a lifting capacity of 1200 kg, the H&R wheel loader remains extremely maneuverable with a relatively small turning circle – ideal for tight construction sites and agricultural applications. Hydraulic quick coupler: With the hydraulic quick coupler, you can quickly and easily switch between various attachments, such as the included standard bucket or the manually adjustable pallet fork. Expandable functions: Use the 3rd and 4th hydraulic control circuits to operate additional attachments such as mowers, bale grippers, snow plows, and much more. H&R loaders are technically and visually optimized in-house and thoroughly tested. Additionally, each machine receives extensive rust protection. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 2412 • Includes standard shovel (160 cm) and pallet fork • Powerful and versatile - versatile • Compact design ensures high maneuverability • Joystick with electric gearshift for precise control • Additional 3rd and 4th control circuits for attachments • LED work lights • Trailer hitch for additional trailer use • 220V coolant preheater for reliable cold start capability • Hour meter for monitoring operating times and ensuring optimal compliance with maintenance intervals • CE compliant according to the EU Machinery Directive • Extensively optimized in Germany • Includes 1-year spare parts warranty Price Net: €18,680.00 Hfjdjwd I Epopfx Ag Een VAT: €3,549.20 Gross: €22,229.20 Financing available! Optional Road registration / operating permit: €695 Extended warranty (2 years): €590 Transportation in Germany and Austria: Upon request Technical details Engine: 4-cylinder Yunnei Engine power: 25 hp (18.8 kW) Emissions class: Euro 5 Lifting height: 2489 mm (bottom edge of standard pallet fork) Unloading height: 2023 mm (standard bucket tipped out) Lifting capacity: 1200 kg Wheelbase: 2173 mm Dimensions: 3740 x 1600 x 2460 mm Weight: 2400 kg Tires: 31×15.5-15 Accessories and spare parts are available from us. Please provide your telephone number when making inquiries!

Condition: new, empty load weight: 300 kg, maximum load weight: 450 kg, overall weight: 750 kg, loading space length: 2,400 mm, loading space width: 1,260 mm, loading space height: 100 mm, tire size: 165/70R13, Drop-down trailer from trailer manufacturer VEZEKO, model HUSKY F08.25. Motorcycles can be easily loaded with a lowerable car trailer. The platform is raised using the standard hand hydraulics. The platform is lowered by opening the valve on the hand pump. This makes it easy to drive small machines, lawn mowers, motorcycles, pallets, quads or ATVs up the minimal incline. The standard equipment of the Senkomat includes a hand hydraulic system, drawbar box, lashing eyes, support wheel, sturdy welded frame, hot-dip galvanized and a very stable V-drawbar. Hfedpfxeq Npbqe Ag Esn The exact equipment and technical details can be found below. A lowering lift trailer is also available as a tarpaulin trailer or box trailer. As trailer accessories, we offer motorcycle rockers, motorcycle stand rails, tarpaulin & frame, side wall attachment, grid attachment, motorcycle lashing straps, lashing straps, TÜV for 100km/h and anti-theft device.

Condition: new, functionality: fully functional, power: 44.87 kW (61.01 HP), gearing type: automatic, fuel type: diesel, fuel tank capacity: 55 l, color: red, overall weight: 4,220 kg, lifting power: 1,800 kg/m, lifting height: 2,784 mm, tire condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, digging bucket width: 1,900 mm, Year of construction: 2025, load capacity: 1,800 kg, machine/vehicle number: H&R 3518, Equipment: additional headlights, all wheel drive, cabin, hydraulics, pallet forks, soot filter, standard shovel, trailer coupling, H&R Loader 3518 – The versatile farm loader for demanding tasks Advantages of the H&R 3518 Wheel Loader Powerful engine: The Yunnei DEF20CFF4 engine with 61 hp ensures maximum performance with lower fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its size, weight, and high lifting capacity, the H&R wheel loader is relatively maneuverable. Hydraulic quick coupler: With the hydraulic quick coupler, you can quickly and easily switch between different attachments. Expandable functions: Use the 3rd and 4th hydraulic control circuits to operate additional attachments such as mowers, bale grabs, snow plows, and much more. Comfortable cab for all-day use: The H&R wheel loader offers a spacious cab with an adjustable seat, diesel auxiliary heating, a rearview camera, heating, ventilation, and a radio with MP3 and USB. This allows you to complete even longer jobs comfortably and safely. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives a comprehensive rust protection treatment. Our wheel loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 3518 Farm Loader • Fully equipped • Extensively optimized in Germany • Powerful and versatile – versatile use • Compact design ensures high maneuverability despite its size • Comfortable cab with heating and ventilation as well as a diesel auxiliary heater • Joystick with electric gearshift for precise control • Additional 3rd and 4th control circuits for attachments • Rearview camera with display • LED work lights and windshield wipers for clear visibility in all weather conditions • MP3 radio and USB port for entertainment while working • Ball-head trailer hitch with socket for trailer use • 220V coolant preheating for reliable cold start capability and increased engine life. • Hour meter for monitoring operating times and maintenance intervals • Extensive rust protection treatment • CE compliant according to the EU Machinery Directive Hodpsul Ab Ssfx Ag Eofn • Includes a 1-year spare parts warranty Price Net: €24,590.00 VAT: €4,672.10 Gross: €29,262.10 Financing available! Optional Road registration / operating permit: €480 Extended warranty (2 years): €590 Transportation in Germany and Austria: Upon request Technical details Engine: 4-cylinder Yunnei Engine power: 61 hp Emissions class: Euro 5 Lifting height: 2784 mm (bottom edge of standard pallet fork) Unloading height: 2279 mm (standard bucket tipped out) Lifting capacity: 1800 kg Wheelbase: 2280 mm Tires: 20.5-70 R17.5 Dimensions: 4050 x 1870 x 2570 mm Weight: 3850 kg Accessories and spare parts are available from us. Please provide your telephone number when making inquiries.

Condition: new, functionality: fully functional, power: 45 kW (61.18 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 4,000 kg, lifting height: 4,095 mm, tire condition: 100 %, axle configuration: 2 axles, number of seats: 1, digging bucket width: 1,900 mm, Year of construction: 2025, load capacity: 1,800 kg, Equipment: additional headlights, adjustable boom, all wheel drive, cabin, hydraulics, pallet forks, parking heater, soot filter, standard shovel, trailer coupling, H&R Telehandler 3518T – the versatile farm loader with a telescopic boom for demanding tasks Benefits of the H&R 3518T Wheel Loader with a telescopic boom Powerful engine: The Yunnei DEF20CFF4 50 hp engine delivers maximum performance with lower fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its size and weight, the H&R wheel loader is relatively maneuverable. Hydraulic quick coupler: With the hydraulic quick coupler, you can quickly and easily switch between various attachments, such as the standard bucket or the manually adjustable pallet fork. Expandable functions: Use the 4th hydraulic control circuit to operate additional attachments such as mowers, bale grabs, snow plows, and much more. Comfortable cab for all-day use: The H&R wheel loader offers a spacious cab with an adjustable seat, diesel auxiliary heating, and a rearview camera, as well as heating and ventilation. This allows you to complete even longer jobs comfortably and safely. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives extensive rust protection. Our wheel loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 3518T Telehandler • Fully equipped • Extendable telescopic arm for greater reach • Includes standard shovel (190 cm) and pallet fork • Powerful and versatile • Compact design ensures high maneuverability despite its size • Comfortable cab with heating and ventilation • Joystick with electric gearshift for precise control • Additional control circuit for attachments • LED work lights and windshield wipers for clear visibility in all weather conditions • Rearview camera with display • MP3 radio and USB port for entertainment while working • Ball-head trailer hitch with socket for additional trailer use • 220V cooling water preheating for reliable cold start capability and increased engine life. • Hour meter for monitoring operating times and maintenance intervals • CE compliant according to the EU Machinery Directive • Extensively optimized in Germany • 1-year spare parts warranty Price Net: €28,660.00 Hfodpfxoulac To Ag Ejn VAT: €5,445.40 Gross: €34,105.40 Financing available! Optional Road registration / operating permit: €480 Extended warranty (2 years): €590 Transportation in Germany and Austria: Upon request Technical details Engine: 4-cylinder Yunnei Engine power: 61 hp Emissions class: Euro 5 Lifting capacity: 1800 kg Lift height: 4095 mm (bottom edge of standard pallet fork) Unloading height: 3451 mm (standard bucket tipped out) Wheelbase: 2272 mm Tires: 20.5-70 R16 Dimensions: 4890 x 1870 x 2570 mm Weight: 4220 kg Accessories and spare parts are available from us. Please provide your telephone number when making inquiries!

Condition: used, Year of construction: 2025, operating hours: 12 h, power: 36 kW (48.95 HP), Radio-Controlled Tool Carrier with Grass Mulcher The Energreen RoboFIFTI RS is a radio-controlled tool carrier designed for use in particularly challenging and hard-to-reach terrain, with the capability to operate on slopes up to 55°. It is equipped with a powerful 50 HP Perkins diesel engine and two hydraulic quick-coupling connections to enable compatibility with various attachments. Features: * 150 m radio remote control range * Optimal maneuverability * Ground adhesion in all directions up to 55° * Special oil pan for secure engine lubrication * Multifunctional operation * High performance, fast work completion * Excellent traction on all surfaces Special equipment: * Hydraulic quick couplers "CEJN" * EU DUAL BAND radio remote control with tilt sensor * Bio-hydraulic oil PANOLIN HLP SYNTH 46 * Standard color orange RAL 2011 / grey RAL 7021 * Rear radiator guard * Counterweights Comp. 70 kg * 1 LED work light * LED beacon 12 Volt with bayonet fitting Attachment: Energreen Head 155 with hydraulic quick couplers "CEJN" and Y-blades Robust, reliable mulcher made of Strenx® steel, ideal for cutting grass and bushes up to a diameter of 3 cm. Rotor with Y-blades and adjustable cutting height. Technical Specifications: Working width: 1535 mm Oil pressure: 305 bar Number of tools: 30 Oil flow: 55 l/min Hydraulic motor: 21 cm³ Weight: 310 kg We have further grass mulchers, forestry mulchers, brush cutter heads, as well as a stump grinder in stock. Additional attachments such as double-blade mowers, mower arms, and many more are available on request! We are happy to offer you suitable financing, hire purchase, or leasing options. Delivery or shipping by arrangement. Hjdpfx Agoy Ep Hzj Esfn We always have a selection of both used and new machines in stock as well as further units available for demonstration. Feel free to contact us! We also offer all equipment for rent, with or without operator. Other information: * Trade-in and purchase of vehicles and machinery possible * Sale price excludes transport * No liability for typographical or printing errors * Subject to errors, changes, and prior sale * Offer is non-binding * Photos may differ. Price applies to current condition * All information without guarantee Further information Fuel type: Diesel

Condition: good (used), Lifting pulley, pulley, rope pulley, steel rope pulley, rope pulley, rope pulley block, hydraulic lifting pulley -Mower lift: Lifting roller with hydraulic cylinder -Hydraulic cylinder: Bosch stroke 190 mm -Number: 2x mower lifts available -Price: per piece Hfjdpfxjv Iycis Ag Eon -Transport dimensions: 480/130/H67 mm -Total weight: 6.1 kg/piece

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 2,550 kg, empty load weight: 2,000 kg, lifting height: 2,530 mm, number of seats: 1, Year of construction: 2025, fuel: diesel, load capacity: 950 kg, Equipment: all wheel drive, head guard, hydraulics, pallet forks, standard shovel, H&R Loader 2010-S25: The compact wheel loader for versatile applications with an open cab and narrow track. With a powerful 25 HP 3-cylinder Perkins Turbo engine from Germany and robust all-wheel drive, this compact wheel loader offers outstanding lifting capacity and high maneuverability – perfect for heavy loads and tight work environments. Advantages of the H&R Wheel Loader 2010-S25 Powerful engine from Germany: The 3-cylinder Perkins Turbo engine with 25 HP delivers high performance with low fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its high weight and a lifting capacity of 950 kg, the H&R wheel loader has a relatively small turning circle. Hydraulic quick coupler: With the hydraulic quick coupler, you can quickly and easily switch between different attachments, such as the standard bucket or the manually adjustable pallet fork. Expandable functions: Use the 3rd and 4th hydraulic control circuits to operate additional attachments such as mowers, bale grabs, snow plows, and much more. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives extensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 2010-S25 • Lifts up to 950 kg at 2.53 m (bottom edge of standard pallet fork) • Extensively optimized in Germany • Narrow track for tight work environments • Supplied with standard bucket and pallet fork • Powerful and versatile - versatile • Compact design ensures high maneuverability • Joystick with electric gear shift for precise control • 3rd and 4th control circuits for attachments such as mowers, bale grabs, snow plows, etc. • LED work lights and windshield wipers for clear visibility in all weather conditions • MP3 radio and USB port for entertainment while working • Trailer hitch for additional trailer use • 220 V cooling water preheater for reliable cold start capability and increased engine life • Hour meter for monitoring operating times and ensuring optimal compliance with maintenance intervals • CE compliant according to the EU Machinery Directive • 1-year spare parts warranty Price Net: €19,150.00 VAT: €3,638.50 Gross: €22,788.50 Financing available! Optional Road registration / operating permit: €595 Extended warranty (2 years): €590 Transportation in Germany and Austria: Upon request Technical details Engine: 3-cylinder Perkins Turbo Engine power: 25 hp (18.8 kW) Emissions class: Euro 5 Lift height: 2530 mm (bottom edge of standard pallet fork) Lift capacity: 950 kg Wheelbase: 1595 mm Tires: 31×15.5-15 Dimensions: 3380 x 1407 x 2340 mm Weight: 1980 kg Hfsdpferdzymox Ag Eon Spare parts and accessories are available from us.

Condition: new, Year of construction: 2020, Storage location: 100294900 Transport dimensions (L x W x H): 0 x 0 x 0 ---- Hydraulic ditch mower Mounting: HS08 Cutting width: 1500mm Hodpezk Aafjfx Ag Eofn With slope cutting blade Year of manufacture: 2020 Capacity: 270 liters Class: 6 to 8 tons Weight: 330 kg Location: Cottbus

Condition: new, empty load weight: 480 kg, maximum load weight: 820 kg, overall weight: 1,300 kg, loading space length: 2,510 mm, loading space width: 1,530 mm, loading space height: 450 mm, tire size: 195/50R13C, Lowering trailer with dropside kit from trailer manufacturer STEMA model WOM XT - STS XT O2 13-25-15.1. A Senkomat or lowering lift trailer is often purchased by motorcyclists. It is well suited for one or two motorcycles, but also for quad bikes, ATVs, lawn mowers and small machines. A three-sided perforated railing and a perforated profile in the middle of the floor secure the load. The trailer is lowered using a manual hydraulic system. The car trailer is characterized by its user-friendliness and stability. The standard equipment of the lowerable car trailer includes the three-sided perforated railing, removable attachment, lashing profile in the middle of the floor, support wheel, fold-down license plate holder, manual hydraulics, sturdy welded frame, hot-dip galvanized and a V-drawbar. Hedpfx Aeq Ru S Dog Esfn As accessories we have motorcycle rockers, motorcycle stand rails, tarpaulin and frame, side wall attachment, 100 km/h damper and TÜV, tool box, motorcycle lashing straps, lashing straps and trailer lock.