Used Finishing Line for sale (11,901)

Condition: used, Year of construction: 1998, Overview This returnable glass bottling line consists mainly of equipment from KRONES and selected components from other established European manufacturers such as Hormes, RINK and HEUFT. The line is designed for a nominal output of 33,000 bottles per hour and includes the main process steps from depalletizing to palletizing.  The labeling machine will be completed according to the buyer’s requirements, allowing the line concept to be adapted to the intended bottle and product portfolio. The line is suited for returnable glass beverage applications. Based on the listed machines, the line is structured for crate handling, bottle washing preparation, empty bottle inspection, high-capacity filling/capping and returnable crate repacking. For bottles with screw caps, the RINK machine can be used upstream of the bottle washer; for crown cork bottles, an additional format set is required as per your note. Technical Data Capacity: 33,000 bottles per hour Line type: Returnable glass bottling line Main machine years: mainly 1998 and newer Bottle type: Returnable glass bottles Closure types: Crown cork and screw cap Packaging type: Beverage crates / returnable plastic crates Filling system: Isobaric filling block by KRONES Special Notes: RINK KM 790/4K-3K QL: only for bottles with screw closure For crown cork bottles, a corresponding format set is required Labeling machine: will be completed according to customer requirements Scope of Delivery Depalletizer | Profipack | – | 2006 Decrater | KRONES | Linapac A-T 1600 | 1998 Crate Washer | Hormes | Crate Washer | 1992 Crate Decapper | RINK | KM 790/4K-3K QL | 2020 Bottle Washer | KRONES | Lavatec-KES | 1998 Empty Bottle Inspector | HEUFT | Spectrum TX | 2015 Filler Block | KRONES | Sensometic VPVI 77-103 / KK11 / SV11 | 1998 Labeling Machine | To be completed according to customer requirements Crater | KRONES | Linapac F-T 1800 | 1998 Palletizing system | Profipack | 2006 Pallet Wrapper | Robopack | 2006 Pallet Security | Vertical Strapping | 2006 Additional Information: Bottle Formats: 0.25 L Individual bottle – Ø 57.5 × 215 mm 0.33 L Ale bottle – Ø 61 × 236.5 / 238 mm 0.33 L Ale bottle – Ø 68.5 × 234.5 mm 0.5 L Ale bottle – Ø 68.5 × 270 mm 0.5 L Steinie bottle – Ø 70.5 × 174 mm 0.5 L Bavaria bottle – Ø 70 × 260 mm 0.5 L NRW bottle – Ø 67 × 260 mm 0.5 L Individual bottle – Ø 82 × 295 mm 0.7 L GDB bottle – Ø 79 × 290 mm 0.75 L GDB bottle – Ø 79 × 290 mm 1.0 L GDB bottle (light) – Ø 84 × 305 mm 1.0 L AMG bottle – Ø 83.7 × 298 mm Crate Formats: 5 × 4 – 400 × 300 × 300 mm 6 × 4 – 400 × 300 × 270 mm 5 × 4 – 400 × 300 × 210 mm 4 × 3 – 355 × 275 × 345 mm 4 × 3 – 400 × 300 × 330 mm 5 × 4 – 355 × 275 × 255 mm 5 × 4 – 400 × 300 × 290 mm Ffjdpfsytvyfex Aa Esw

Condition: used, mileage: 475,766 km, power: 471 kW (640.38 HP), first registration: 03/2022, fuel type: diesel, empty load weight: 8,057 kg, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: intarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, number of beds: 2, front tire size: 385/55R22,5, rear tire size: 315/70R22,5, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, central locking, compressed air brake, cruise control, differential lock, fog lights, navigation system, onboard computer, parking heater, spoiler, truck registration, MAN TGX 18.640 XXL Full Air Suspension | Leather seats, independent roof air conditioning | Automatic transmission, EURO 6 | Intarder, refrigerator | Heated/ventilated seats, auxiliary heater, cruise control | Air conditioning, electric windows, heated electric mirrors | Radio/CD, differential lock | 2 tanks | Austrian vehicle | Subject to error, input mistakes, and prior sale. Fodpfx Ajyttkhja Esfw

Condition: used, Year of construction: 2016, functionality: limited functionality, Manufacturer: EWAG AG Model: Laser Line Ultra Machine Type: 5-axis Laser Machining Centre Serial Number: 7195-0022 Release: 5 Year of Manufacture: 2016 Laser Source: Coherent Hyper-Rapid 50 Laserhead Laser Manufacturer: Coherent Kaiserslautern GmbH Laser Manufacturing Date: 28.01.2016 Laser Classification Machine: Laser System Class 1 according to DIN EN 60825-1:2008-05 Axes: X, Y, Z, B, C CNC Control: Fanuc 31i-5 Control Operating Voltage: 3 × 400 VAC / N / PE Frequency: 50 Hz Control Voltage: 24 V DC Rated Current: 17.3 A Connected Load: 12 kVA Max. Fuse Protection: 25 A (slow-blow) Wiring Diagram Number: 100211907 Extraction System: ULT LAS 200 Extraction System Documentation: complete Operating Hours: 35,788.02 h Note: Laser unit is defective and must be replaced Robot currently removed and being overhauled, optionally available Inspection under power possible Fsdpsytrp Njfx Aa Eofw

Condition: excellent (used), Complete line direct from Bankrupt company which was filling capsules and tablets into small tubs. Bottlea are loaded into the line from lazy susan, product is counted and doses into the tub or bottle which is then foil sealed before the screw lid is applied. All machines were bought new in 2015 and appear to be in excellent condition. The counter is a Vitacount 12-1 Ffodpfx Ajw Hz T Eea Eew

Condition: excellent (used), Year of construction: 2016, Complete line for packing products like flour, semolina etc into small, fold top paper bags. Was installed new in 2017. Photos show the machine set-up for potatoes. Price of machine without potato weigher is EUR 25,000 Ffjdpfxettwt Ao Aa Eew

Condition: used, Year of construction: 2011, Overview This Paxona line distributor for trays was manufactured in 2011 and is designed to divide a single infeed lane into two parallel lanes. The system is typically used in packaging or conveying lines to distribute trays efficiently to downstream machines such as packers, fillers, or palletizing systems. With less than 5,000 operating hours, the unit has seen comparatively low usage and represents a well-preserved solution for line balancing and product distribution. Paxona equipment is known for robust construction and reliable integration into automated production and packaging environments. The distributor is suitable for tray handling applications where a stable and controlled product flow from a single lane to two parallel lanes is required. Technical Data  Manufacturer: Paxona Machine type: Tray line distributor / lane divider Function: Distribution from 1 lane to 2 lanes Year of manufacture: 2011 Operating hours: < 5,000 h Application: Tray conveying and line distribution Condition: Used, low operating hours, store Ffsdpfx Asythxaja Esw

Condition: good (used), Year of construction: 2013, Central control WAGNER automatic powder spraying booth (pre-treated parts), incl. WAGNER SuperCenter powder supply unit (2013) Manual powder spraying system (small series, mixed colors) with guns Cyclone separator Block gas-heated water drying furnace. drying and baking furnace (incl boiler) Fsdpfx Aeyhbdfsa Eofw The powder-coated workpieces are fired in a natural gas-heated powder firing furnace Cooling after water drying Cooling after powder firing Handling system Automatic wastewater treatment capacity: max.: ~ 1 m³/h

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Very few operating hours, installed at the beginning of 2023, in very good condition. Consisting of: 1 City e perfect binder - with PUR - with hotmelt - with cooling and drying section Wohlenberg City e perfect binder Base machine Edition 4000 for standalone or in-line operation, compatible with a Sprinter gathering machine and a three-knife trimmer Edition 5000, extended machine configuration for increased speed up to 5,000 cycles/hour Mobile hotmelt spine gluing unit, 40 kg, with 2 application rollers Compact, mobile PUR spine gluing unit - Europe, with 2 application rollers Mobile hotmelt side gluing unit Fsdpfxeytbz Io Aa Eofw Cooling and drying section

Condition: used, functionality: fully functional, With this offer, you are purchasing a used booklet finisher, the ‘Canon Booklet Finisher-AF1’. Item for sale: 1 x Canon Booklet Finisher-AF1: Specially designed for the Canon imagePRESS V1000 Condition: This offer is for a used accessory, which may show signs of wear (minor scratches or yellowing). The accessory has been tested for functionality. Packaging and shipping: You are welcome to view the accessory during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! Ffedpfx Ajytbkcea Esw For more information, please feel free to contact us personally.

Condition: excellent (used), Catalogue number: 7817 TECHNICAL DATA DDCA - Double-End Tenoner - Minimum panel width: 180 mm - Maximum panel width: 850 mm - Minimum panel height: 10 mm - Maximum panel height: 45 mm - Spindle diameter: 30 mm - Maximum blade diameter: 250 mm - 4 blades included 5 spindles: Left side: 1) Top vertical spindle 2.2 kW 2) Bottom horizontal spindle 2.2 kW Right side: 1) Bottom vertical spindle 2.2 kW 2) Top vertical spindle 2.2 kW 3) Bottom horizontal spindle 2.2 kW - Spindles adjustable up/down and left/right Ffsdpfx Aaoxwytij Ejw - 2 material hold-downs - Stepless feed speed adjustment: 0–10 m/min - Central lubrication via oil pump - Pump motor: 2.2 kW - Extraction port diameter: 5 x 100 mm - Dimensions (LxWxH): 1900 x 2230 x 1530 mm DDGA - Four-Sided Planer - Maximum panel width: 130 mm - Panel height: 10–60 mm - Minimum workpiece length: 200 mm Spindle arrangement: 1) Bottom spindle 5.5 kW 2) Right spindle 5.5 kW 3) Left spindle 5.5 kW 4) Top spindle 5.5 kW - Spindles adjustable up/down - Top and bottom spindle diameter: 40 mm - Right and left spindle diameter: 30 mm - 4 feed speeds: 13/20/26/40 - Central chain lubrication via oil pump - Extraction port diameter: 4 x 120 mm - Dimensions (LxWxH): 3200 x 1370 x 1830 mm DBCA - Tenoner Infeed Conveyor - Maximum feed speed: 40 m/min - Maximum panel width: 150 mm - Motor: 0.55 kW - Overall dimensions (LxWxH): 2320 x 600 x 1150 mm DBGA - Strip Infeed Conveyor - Strip length: 200–600 mm - Strip width: 30–120 mm - Strip thickness: 10–40 mm - Stepless feed speed adjustment: 10–40 m/min - Motor: 0.75 kW - Overall dimensions (LxWxH): 1500 x 500 x 980 mm - Total weight: approx. 4900 kg – Polish production – DTR technical documentation included – 5 spindles – Unpainted – Very good condition – Used machine Net price: 63,900 PLN Net price: 15,200 EUR, according to the exchange rate of 4.2 EUR (Prices may vary according to exchange rate fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and names are used purely for informational purposes to allow identification of the goods. We only resell items that have already been put on the market by the manufacturer. We have no business relationship with the manufacturer.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used accessory, the ‘Konica Minolta Large Capacity Unit LU-202XLm’. In this offer, you are purchasing a used brochure finisher ‘Konica Minolta SD-513’. Item for sale: Ffjdpsyr Rkcofx Aa Eow 1 x Konica Minolta SD-513: Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test print can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.

Condition: used, Disposable PET filling line consisting of the following components: - Crate ejector (crate emptier, Gera GmbH, 20 ejectors in a 4x5 arrangement) for 0.5-litre bottles - Crate ejector for 1.0-litre bottles (Gera, 2003) - Case washer with cleaning nozzles - Stretch blow moulding machine (SIG, type Blomax 18, built in 2003, with 18 cavities) - Air conveyor for PET bottles (Convair, 2001) - Suction system (2003) - Air transport (KHS Innoline, 2003) - Premix system (Procomac Starmix CM, built in 2001, 250 hl/h) consisting of water degassing, mixer and carbonation with a total of 4 containers - Velcorindo dosing (dmt, Burdomat II G) - Cap feeding and cap conveyor system (Procomac, 2005) - PET bottle rinser, filler and capper (Procomac, 2001) - Labelling machine (P.E. Futura, 2001) for hot glue labelling of wrap-around labels, in block with laser dating (Videojet, 2017, with suction) and label box (2005) - Labelling machine (KHS Roland, 2009) - Best-before date detection device (2011) - Air knife blow-off system for bottles (2017) - CIP system (Procomac, 2001) with 3 tanks, each with a capacity of 20 hl - Free, powered conveyor lines for bottles and crates Additional title: non-returnable PET filling Capacity: 16000 bo/h Ffjdsyr N Utspfx Aa Esw Formats: 0.5 litre disposable PET bottles, 20-bottle crates Features: Bottle ejector, crate washer, 2 x stretch blow moulding machines, premixer, Velcorindo dosing, cap feeding and conveying, rinser/filler/capper, labelling machine, date coding, packer, best before date detection device, bottle blowing, bottle air transport, suction system, CIP system, free crate and bottle transport

Year of construction: 2010, condition: good (used), Parts shown by hand not come. Ffjdoyr N Tvopfx Aa Eew Machine is fully functional.

Condition: used, Year of construction: 2000, machine/vehicle number: LC348, Used Filling Line For Edible Oil In PET 1L Bottles Capacity: 6.000 bph x 1,0 L Blow Molding Machine KOSME KSB 3000 – 2001. – 2 pcs x 3.900 bph Box for preforms with transport to the blower Compressor for cooling moulds MTA S.R.L. – 2000 KOSME bottle air conveyor – 1999 AISI 304 stainless steel Electrical control cabinet with PLC Built-in air filters It transports bottles from blower to filler Filling Monoblock Filler and capper – ICS-Slovenia – 1995 – 6.000 L/h Labelling Machine Labeller ICS – 1995 – paper labels, cold glue Conveyor belts ICS – 1995 Packer in transport boxes 3×5 bottles – ICS – 1995 Shrink Wrapper Shrink wrapper SMIPACK-packer in foil 2×5 bottles – 2013 Pallet Wrapper Fsdpfjyhbzdox Aa Eefw Pallet wrapper ZLATOROG-Slovenia – 1999 Compressor KAESER low and high pressure compressors – 2000 Refrigeration dryer There are spare parts worth It has complete technical documentation Required space for equipment: 600 m2 Required installed power (equipment, compressors, refrigerators): 495 kW The Used Filling Line For Edible Oil In PET can be seen in full production function until December 15, 2022

Condition: excellent (used), Wide Belt Sander FORMAT 4 Finish 1302 -used- Constant working height due to upper part adjustment, Combination unit with contact roller and sanding pad, Rubber-coated contact roller, Pneumatic activation of the contact roller, Electronic segmented sanding pad, Ffedpoxnm Rcjfx Aa Esw Digital display for sanding height, Infinitely variable feed speed, Automatic belt centering, Operation via touchscreen display, Air-cushioned sanding pad, Sanding belt oscillation ----- Technical Data ----- Working width: 1,300 mm Number of belts: 2 units Sanding belt dimensions: 1,310 x 2,200 mm Feed speed: 3.7–16 m/min Segment width sanding pad: 55 mm Max. workpiece thickness: 170 mm Min. workpiece thickness: 5 mm Extraction port Ø: 2x200 mm Motor power: 18.5 kW Second motor power: 15 kW Dimensions (LxWxH): 1,950 x 2,250 x 2,600 mm Weight: 2,400 kg Quality Information: - Belt tracking / balance checked - Sanding pad checked / refurbished - Height adjustment checked - Thorough basic cleaning - Electrical system checked - Immediately ready for use

Condition: used, Year of construction: 2009, machine/vehicle number: LC606, Technical Specifications & Performance DataThis used bottling line is engineered for high-speed beer production in glass containers and is suitable for second hand industrial packaging applications. The line integrates washing, inspection, filling, capping, pasteurization, case packing, palletizing, and conveyor handling for efficient beverage production.Production speed: 60,000 bottles per hourContainer type: Amber glass beer bottlesBottle format: 0.45 L (nominal); brimful 0.464 L ± 4 mlFilling height: 45 mm from the top edgeMain filler/capper: Krones MECAFILLEmpty bottle inspection: Toptronic 19 (EBI)Pre-/post-fill inspection: Krones Checkmat; full bottle inspection and level/cap controlBottle washer: Krones LavatecTunnel pasteurizer: SHIELDCase packer: SmartPac Einpacker for crate insertionPalletizer: Krones Pressant SoperConveyor system: Krones Synco SElectrical supply: 400/230 V, 50 HzRepresentative loads (components): up to 182 A (control unit), 41 A (pasteurizer), 23 A (palletizer), 8 A (wet-end inspection equipment)Year of construction (key components): 2009Advanced Automation & Control SystemsThe line combines synchronized conveyor controls with integrated inspection systems to maintain consistent product quality at high throughput. Centralized operator interfaces provide clear status feedback for the filler/capper, inspection modules, pasteurizer, and end-of-line equipment. Electrical architecture follows standard industrial beverage production practices for reliability and maintainability.Main power: 400/230 V, 50 HzIntegrated inspection: Empty bottle inspector, pre-fill and post-fill Checkmat controlsAutomated bottle handling and crate insertion to sustain continuous operationDesigned for rapid fault detection and line recovery through modular stationsProduction Line Integration CapabilitiesConfigured as an inline system, this used bottling line is designed for seamless transfer between wet end processing, filling and capping, thermal treatment, and dry end packaging. The Krones Synco S conveyor network ensures stable bottle flow and accumulation management.Inline operation with coordinated starwheels and conveyorsGlass bottle handling optimized for beer applicationsDownstream compatibility with crate packing and palletizingFocused on 0.45 L glass format for high-speed runsMachine Condition & Maintenance HistoryThe line is presented as a second hand solution in ready-for-operation condition. Key components are from 2009, reflecting modern engineering suitable for high-speed beer bottling. Operational details, service records, and maintenance logs can be aligned with on-site inspections and testing during commissioning.Operational Performance & VersatilityPurpose-built for beer, the line emphasizes hygienic filling, robust glass handling, and end-to-end quality assurance. Empty bottle inspection removes non-conforming containers prior to filling, while post-fill controls verify liquid level and cap integrity. The tunnel pasteurizer stabilizes product for distribution, and the dry end manages crate pack... Ffodpfx Ajyr Huqea Eew

Condition: used, Year of construction: 2013, operating hours: 17,387 h, machine/vehicle number: LC607, Technical Specifications & Performance DataThis used bottling line is a Tetra Pak A3/Speed aseptic carton packaging solution configured for 250 ml base format. Built for high-volume industrial packaging and beverage production, it offers reliable, second hand performance with proven uptime. The line integrates core filling and downstream modules to support efficient, continuous operation.Manufacturer: Tetra Pak Packaging Solutions S.p.A.Model: A3/SpeedYear: 2013Operating hours: 17387Rated speed: up to 24,000 packs/hour (250 ml base)Package format: 250 ml baseContainer type: Carton (Prisma)Electrical supply: 400 VIncluded equipment: Filler, Helix30, TSA30, CBP30, Line Controller 30, ConveyorCompliance: CE markedAdvanced Automation & Control SystemsThe line features integrated automation for stable throughput and quality. The Line Controller 30 coordinates primary and downstream modules, balancing flow across the conveyor network. Operator interfaces enable straightforward adjustments, status monitoring, and fault diagnostics. Safety interlocks and emergency stop devices enhance operator protection and reduce unplanned downtime.Coordinated line control for synchronized module operationAutomated speed regulation across filler and downstream equipmentOperator-friendly controls for setup and routine operationIntegrated safety circuits and emergency stop devicesProduction Line Integration CapabilitiesDesigned for seamless integration, this packaging line connects upstream and downstream equipment through a modular conveyor system. The A3/Speed filler works in tandem with Helix30, TSA30, and CBP30 to manage post-fill operations. Changeover for the 250 ml base format is streamlined to maintain high availability and consistent quality in beverage production.Inline operation with synchronized conveyor handlingOptimized for 250 ml baseModular downstream accessory equipment for post-fill processesSuitable for industrial packaging applications within high-speed environmentsMachine Condition & Maintenance HistoryThis second hand A3/Speed line from 2013 shows 17387 operating hours and is presented as a working solution suitable for rapid deployment. The equipment bears CE marking and is configured for 400 V electrical supply. Overall condition aligns with a maintained, ready-for-operation used bottling line, offering a dependable option for facilities expanding aseptic carton packaging capacity.Operational Performance & VersatilityPurpose-built for aseptic carton applications, the line maintains consistent pack quality at high speeds. The coordinated modules support stable flow, minimizing bottlenecks and start/stop cycles. Its Prisma 250 ml base configuration is well-suited to beverage production environments seeking reliable throughput and standardized carton presentation within industrial packaging operations.High-speed aseptic carton filling with robust downstream... Ffsdpfx Ajyr Hudsa Eew

Condition: ready for operation (used), Year of construction: 2002, This IMA Combima complete edge banding line with loading station was manufactured in 2002. A robust double-sided edgebander, it features a working width of 235 to 2600 mm and a length range of 200 to 2600 mm. Capable of speeds from 10 to 40 m/min, it includes jointing milling, a semi-automatic gluing unit with a 6-piece edge magazine, and both straight and profile trimming units. Consider the opportunity to buy this IMA Combima double sided edgebander. Contact us for more information about this machine. Application Types Ffjdpjx D Iq Njfx Aa Eew Edge Banding

Year of construction: 2007, condition: ready for operation (used), This HOMAG WEEKE industrial production line was manufactured in 2007. It features a comprehensive setup for high-volume panel processing and edge-banding, including automatic loading systems, a central roller conveyor, multiple edge-banding modules, and a portal manipulator for stacking. Ideal for streamlined wood production, ensuring efficient handling and precision. Consider the opportunity to buy this HOMAG WEEKE industrial production line. Contact us for more information about this machine. Application Types Complete Production Fsdpsx D Dq Ssfx Aa Eofw

Year of construction: 2001, condition: ready for operation (used), This HEESEMANN BÜRKLE wood production line was manufactured in 2001. It features a comprehensive oil application line, including RBO vacuum feeding Tornado SC 1300, HEESEMANN MFA 8 with cross-lengthwise brushes, and BÜRKLE SLC 1400 roller application machines. Enhanced with a new Siemens control system in 2024, consider the opportunity to buy this HEESEMANN BÜRKLE wood production line. Contact us for more information. Application Types Complete Production Fodpsx D Rh Rjfx Aa Esfw

Condition: ready for operation (used), Year of construction: 2003, operating hours: 92,000 h, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 5, This 5-axis Index G 200 RATIO LINE was manufactured in 2003. It features a Y-axis travel of 120 mm, a main spindle diameter of D65, and a counter spindle diameter of D60. The machine is equipped with a turret that has 12 stations and driven tools on turret 1 and 2. If you are looking to get high-quality turning and milling capabilities, consider the Index G 200 RATIO LINE turn-mill centre we have for sale. Contact us for further details. • C-axis on main and counter spindle • Thread cutting without compensating chuck • Electronic shaft • Additional V24 RS232 interface in control cabinet • Transmit-/Tracyl function • MDE interface (machine on, machine running, parts counter) • Marposs (Brankamp) collision monitoring CMS100 • 3D machine model for kinematic simulation in CAM programming system • Control cabinet cooling unit • Main spindle D65 • Counter spindle D60 • Coolant flushing of counter spindle (electrically controlled shut-off valve) • Foot switch • Turret (12 stations) bottom and top • Driven tools on turret 1 and 2 • Control function “synchronous tailstock” for turret 2 • Y-axis 120 mm • Automatic sliding door (hydraulic) • Coolant pump 80 l / 8 bar • High-pressure coolant connection slide 1 and 2 with solenoid valve • Coolant flushing gun • Preparation for extraction and filter system connection • Operating hours approx. 92,000 h Additional equipment • Portal unloading device with actuated gripper, NC-controlled • Gripper fingers D4–45 mm and D40–65 mm • Indexed conveyor belt • UNIMAG interface • Chip conveyor (hinged belt), discharge height 1250 mm Fjdjylw Dcopfx Aa Esfw • Vacuum rotary filter KNOLL (emulsion use) • High-pressure pump 80 bar • Workholding: • Collet chucks for draw tube, HAINBUCH (main and counter spindle) • Power chucks D210 with quick jaw change, Schunk (main and counter spindle) • Stop device • Optional: large number of powered tool holders and spare parts warehouse

Condition: ready for operation (used), Year of construction: 1998, This WILD door leaf press line was manufactured in 1998. It is designed for door production, handling dimensions from 1,800 to 2,300 mm in length, 500 to 1,300 mm in width, and thicknesses of 35, 40, and 44 mm. The line includes areas for gluing, pressing, and handling door panels with advanced feeding and transfer systems. If you are looking to get high-quality door production capabilities consider the WILD door leaf press line we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Dimensions for door production: lengths: 1800 - 2300 mm • Dimensions for door production: widths: 500 - 1300 mm • Dimensions for door production: thicknesses: 35 / 40 / 44 mm Extra Information Consisting of the following areas: Endless door panel gluing with frame laying station Press line with hard fiberboard loading station First area consists of: Portal feeding Angle transfer with rip and cross cut saw Feeding and supply of longitudinal and cross frame parts from magazines Longitudinal cross-cut station for the longitudinal frame parts Connecting station for the frame parts with the door leaf core, equipped with clamping devices Conveyor belt angle transfer with shuttle transfer of the door leaf cores to the glued hardboard panels Second area consists of: Feeding of the hardboard panels Brush cleaning machine Ffodpfx Ajyaqmgea Eew Hardener application machine from below Glue application machine from below Disk roller conveyor Angle transfer for the lower hard fiber board Vacuum turning device for the upper hard fiberboard Automatic loading station for hardboard panels and door leaf cores Two door presses with two x four pressing stations each, set up parallel to each other Both presses are loaded at the infeed with one shuttle loading basket Both presses are unloaded at the outfeed with one shuttle unloading basket Angular transfer to the infeed into a hedgehog buffer Angular transfer at the outlet of the hedgehog buffer and feeding for stacking One-sided vacuum destacking with protective plate placement Note: The technical data and descriptions are transcribed from the original order confirmation. The information is for reference only and is not legally binding.

Year of construction: 2008, condition: ready for operation (used), This DELTA pallet nailing machine line was manufactured in 2008. It features a comprehensive setup including a base nailer, a nailing machine with pneumatic feeder and nail control, units for marking, turning by 90 and 180 degrees, a corner saw, and a stacking unit, complemented by a conveyor belt. Consider the opportunity to buy this DELTA pallet nailing machine line. Contact us for more information. Fjdpeyaiyrefx Aa Esfw Machine Benefits Technical Machine Benefits • Base nailer / pallet nailing machine: with pneumatic crossboard feeder, with template for holding deck boards, with nail feeding control system / loading unit for pallet marking / unit for turning pallets 90 degrees / pallet corner saw unit/ pallet turning unit with 180 degree turner / pallet stacking unit / pallet conveyor belt

Condition: ready for operation (used), Year of construction: 2006, operating hours: 115,000 h, travel distance Y-axis: 120 mm, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 5, This 5-axis Index G 200 RATIO LINE was manufactured in 2006. It features a Y-axis travel of 120 mm, a turret with 12 stations, and driven tools on both turrets. The machine is equipped with a Siemens 840D control system and includes a collision monitoring system. If you are looking to get high-quality turning and milling capabilities, consider the Index G 200 RATIO LINE turn-mill centre we have for sale. Contact us for further details. • C-axis on main spindle and sub spindle • Electronic gearbox • Additional V24 RS232 interface in electrical cabinet • Transmit / Tracyl function • MDE interface (machine on, machine running, part counter) • Collision monitoring system Marposs (Brankamp) CMS100 • 3D machine model for kinematic simulation in CAM system • Electrical cabinet cooling unit (2 units) Fedpjylwuhjfx Aa Ejfw • Main spindle D65 with HAINBUCH pull-type collet clamping • Sub spindle D60 with HAINBUCH pull-type collet clamping • Stop device • Coolant flushing of sub spindle (electrically controlled shut-off valve) • Foot switch • Turret (12 stations) upper and lower • Driven tools on turret 1 and 2 • Control function “synchronous tailstock” for turret 2 • Automatic sliding door (hydraulically actuated) • ROTOCLEAR viewing window • Coolant pump 80 liters / 8 bar • High-pressure pump 80 bar • High-pressure coolant connection for slide 1 and 2 with solenoid valve • Coolant flushing gun • Preparation for extraction and filter system connection • UNIMAG interface • Operating hours: approx. 115,000 h Additional equipment • Portal unloading unit with actuated NC-controlled gripper • Gripper fingers D4–45 mm and D40–65 mm • Indexed conveyor belt • Chip conveyor (hinged belt), discharge height 1250 mm • KNOLL vacuum rotary filter (for emulsion use) • Multi-channel bar loader: Breuning / IRCO PROFImat 65.8 PR*270/8 • Year of manufacture: 2006 • Bar capacity: up to 3 m length • Maximum bar diameter: D65 • Optional: large number of powered tool holders and spare parts warehouse

Condition: ready for operation (used), Year of construction: 2012, product length (max.): 2,250 mm, This Hüttenhölscher Line multi-spindle drilling machine was manufactured in 2012. It features a PC-controlled function sequence under Windows 7 with TwinCAT, a 6-station loading gantry, and a 2-axis gantry robot. The machine includes a vacuum generation by ejector and multiple conveyor lines for efficient material handling. Ideal for high precision drilling with its advanced control system. Contact us for more information about this machine. • Control: PC-controlled function sequence under Windows 7, TwinCAT • Part dimensions: • Length: 300–2250 mm • Width: 350–710 mm • Thickness: 16–25 mm • 2-station drilling station: • Base frame as welded construction with machined screw-on surfaces • 2x toothed belt conveyors V = 1.5 m/sec • 2x pneumatic lift for toothed belt conveyors • 2x stoppers for cabinet parts, dampened by shock absorbers • 2x pneumatic double clamping cylinders, controlled by ball screw and servo motor, moved to side height (measuring the side height) • 2x pneumatic cross alignment ruler (plausibility check) • 2x vacuum clamping units in the drilling machine table • 2x 0-line controllable • Support: • Support can be moved in the X direction by means of a servomotor • 2x drilling gear (support 1): • Support equipped with 2 units (machining from above) • Individually movable in Y direction by servomotor • Individually movable in Z direction by servomotor • Drilling gear a = 32 mm, adjustable with frequency converter, drill chuck Ø 10h7 with grub screw • Callable spindles, 8000 rpm • Two 16-spindle drilling gears • Groove saw (support 1): • Sawing units for cutting special rear wall grooves • Sawing unit with tool holder, speed control via frequency converter • Pneumatically pilot-controlled working position • 2x milling spindles right/left at the front edge (support 1): • Pneumatically pilot-controlled working position Additional equipment (automation, handling, guarding, conveyors) • Loading/handling: • 6-station loading gantry • 2-axis gantry robot; Y/Z axes with servo motors; travel distances: Y-axis 8500 mm, Z-axis 1500 mm • Suction crossbeam with four-circuit vacuum supply; vacuum generation by ejector • Double part detection • Portal supports • 4 stacking stations • 1 hand rest station (automatic/manual feeding) • 1 removal station (automatic/manual removal) • Side feed range: • Stack height: max. 1000 mm (60 parts) incl. protective plate • Protective plate sizes: • 1380 mm x 780 mm • 1220 mm x 720 mm • 1120 mm x 620 mm • 2290 mm x 620 mm • Thickness: 25 mm • Thickness: max. 28 kg • Floor roller conveyor / stack feed: • 4 roller conveyor lines, 930 mm wide x 3600 mm long, AH 300 mm Ffjdpfxeyctauo Aa Eew • Feeding/removal: manual cross transfer carriage • Support stations / automatic feeding: • Transport section 950 mm wide x 4100 mm long; integrated side stop • Manual feeding: • Toothed belt section 900 mm wide x 2500 mm long • Transfer shuttle: • Toothed belt section 900 mm wide x 2500 mm long; horizontal stroke approx. 2500 mm by three-phase motor • Return: • Transport section 950 mm wide x 4000 mm long; pneumatic stopper • 90° rotary unit: • Vacuum suction cup; pneumatic stroke; rotation by three-phase motor by +/- 90° • Discharge stations / automatic removal: • Transport 950 mm wide x 3000 mm long; positioning of cabinet parts by encoder • Manual removal: • Toothed belt section 900 mm wide x 3000 mm long • Protective system for feeding: • 45 m protective fence with 3 access doors