Used Fineblanking for sale (8)

Condition: used, Year of construction: 1999, functionality: fully functional, pressing force: 630 t, year of last overhaul: 2023, Equipment: CE marking, documentation/manual, Precision cutting press with coiler and straightening machine Table size: 1,350 mm x 950 mm Good condition, from series production, regular maintenance. Fedezrw R Uopfx Akyogh

Condition: used, Year of construction: 1980, Arisa press with 40-ton pressing force Fodpfx Akjyyq H Usyjgh

Condition: excellent (used), Year of construction: 1987, pressure 320 t plate thickness 0 mm no. of strokes 80 Hub/min pressing capacity total 320 t stroke 30 - 80 mm table surface area unten: 630 x 740 mm table surface area oben: 630 x 630 mm total power requirement 60 kW This fineblanking press FEINTOOL HFA 320 was completely overhauled in 2019 and is in new condition with new CE mark MAIN RAM total force (nominal) 320 to stroke min. 30 mm stroke 80 mm Fgedpfxevwgl Nj Akyoh V-RING nominal force 160 to stroke 30 mm COUNTER RAM nominal force 80 to stroke 30 mm TOOL DIMENSIONS lower table - width 630 mm lower table - depth 740 mm upper table - width 630 mm upper table - depth 630 mm daylight max. 320 mm ELECTRICAL SPECIFICATIONS total power consumption 60 kW

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Two-crank mechanical press with a rigid frame structure. Manufactured by: SIMPAC INC., South Korea – 2019. 3-in-1 feeder line TAE IN TECH TNCL-5042 with an unwinder. Pressing force: 300 tons. Maximum pressing point (R.T.P.): 6.0 mm before the lower dead center. Slider stroke: 250 mm. Working speed: 22 – 45 strokes/minute (continuously adjustable with a frequency converter). Maximum die height: 650 mm. Fjdpfxsy Twk Tj Akyjgh Slider adjustment: 120 mm. Work table: 2650 x 1100 mm, thickness 200 mm. Slider: 2350 x 1000 mm. Air pressure: 5 bar. Overall dimensions (L x W x H): 3600 x 2800 x 4650 mm. Machine weight: 50,000 kg. Motor power: 37 kW. Total weight of the line: approximately 56 tons. Total power consumption of the line: approximately 55-60 kW.

Condition: used, Year of construction: 2000, Capacity: 250 ton V – Ring nominal force: 30 - 125 ton Counter ram nominal force: 30 - 125 ton Ram stroke: 64 - 67 mm Table surface area : 560 x 600 mm Slide area: 560 x 560 Number of strokes: 80 s.p.m. Weight of machine approx.: 14.000 kg Standard configuration Maximum material thickness: 10 mm Fsdpfszwfqaox Akyogh Extended machine accessories including roller feedincluding waste-cutting shears Automation Straightening unit, model RLM 25-SMaterial width 50–250 mmMaterial thickness 6–10 mmNumber of straightening rollers: 5Diameter of straightening rollers: 88 mm Decoiler USM 2000 AS Coil weight: 2 tonnesCoil outer diameter: approx. 1,500 mmCoil inner diameter: approx. 508 mmMaterial width: 50–250 mm

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Total press force: 16,000 kN Force application point before the PMI: 18 mm Number of strokes adjustable continuously in automatic mode: 10 - 22 1/min Slide stroke: 605 mm Slide adjustment: 400 mm Mold height (stroke downwards, adjustment upwards): 1300 mm Table dimensions: 4500 × 2300 mm Slide dimensions: 4500 × 2300 mm Table height from the ground: 600 mm Table stroke: T-Track Transfer stroke: 0 - 1200 mm Internal clearance of the guide shoulder for the clamping pins (min.): 800 mm Internal clearance of the guide shoulder for the clamping pins (max.): 2400 mm Lifting stroke: 0 - 280 mm Cushions in the base (hydraulic): 2 pcs. Positioning of both cushions: Motorized and adjustable Cushion force: 300 - 2000 kN Cushion stroke: 0 - 250 mm Cushion surface area: 1600 × 950 mm Pneumatic cushion in the slide: 2 pcs. Cushion force in the slide: 55 - 550 kN Maximum cushion stroke in the slide: 150 mm Left slide cushion surface area: 1450 × 1600 mm Right slide cushion surface area: 1300 × 1600 mm Maximum weight of the upper part of the mold: 36,000 kg Maximum total weight of the mold: 40,000 kg Technical data for the CISAM line: • Strip width: 300 - 1600 mm • Strip thickness: 0.5 - 3.0 mm • Tensile strength: 600 MPa • Yield strength: 400 MPa Fsdjzldwujpfx Akyjgh • Feed rate: 200 - 1300 mm • Feed accuracy: ±0.1 mm • Maximum feed cross-section: 4,000 mm² • Strip entry height above the table: 500 - 800 mm • Maximum coil weight: 25,000 kg • Coil outer diameter: 900 - 1,855 mm • Mandrel expansion range: 500 - 610 mm • Nominal coil inner diameter: 610 mm • Straightening rollers: 9 pcs. • Straightening unit with cassette construction

Condition: used, Year of construction: 1996, machine/vehicle number: 7/4986, Capacity: 250 - 400 ton V – Ring nominal force: 20 - 200 ton Counter ram nominal force: 10 - 100 ton Ram stroke: 30 - 200 mm V-Ring stroke: 40 mm Counter ram stroke: 40 mm Daylight: 760 mm Ram surface: 800 x 800 mm Table surface: 810 x 1000 mm Max. die size: 765 x 760 x 610 mm Number of strokes: 40 s.p.m. Approach speed: 120 mm / sec Return speed: 135 mm / sec Working speed: 5 - 50 mm / sec Die Weight total: 2400 kg Standard configuration Fjdpfxeuqdxio Akysgh Automation roll-off try with leveller

Condition: refurbished (used), Year of construction: 2004, operating hours: 5,000 h, functionality: fully functional, total height: 4,300 mm, ram adjustment: 100 mm, installation height: 500 mm, table height: 1,000 mm, total width: 2,200 mm, table length: 1,400 mm, pressing force: 200 t, control cabinet width: 2,000 mm, stroke length: 160 mm, clearance between the columns: 1,450 mm, working width: 1,100 mm, distance between side stands: 400 mm, overall weight: 27,000 kg, height adjustment type: electric, space requirement height: 4,500 mm, space requirement length: 2,200 mm, space requirement width: 1,800 mm, High-precision cutting and embossing press, U.T accuracy +/- 0.01, ideal for the production of fuel cell stacks or hydrogen electrolyzers. hydrogen electrolyzers. The press is also suitable for (smooth) fineblanking, stroke rate 1 - 70 /min. Eccentric loads are also possible without any problems thanks to 4 connecting rod rams. It is also not possible for the press to jam. Fgsdpfxjt Nf Agj Akyoh The press is completely overhauled and supplied with a new Siemens S7 control system.