Used Film Processor for sale (1,862)

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 0808339, Size 52 x 74 cm, Automatic feeding, Adjustable side bracket, Temperature control by sensor, Pneumatic pressure roller. Kedpfx Asrmkm Ioffjfa

Condition: new, functionality: fully functional, power: 90 kW (122.37 HP), Year of construction: 2025, Plastic squeeze dryers are a vital part of plastic film washing lines. Washed films retain up to 30% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer is a must to dehydrate the washed film, increase the density of recycled film and fibre materials, increase the capcity of the following extrusion process and further refine the quality of final plastic pellets. Kfedswg Sd Ujpfx Affoa Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would significantly reduce the productivity of the extruder and quality of pellets. The latest development for drying and recycling washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying , and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids to dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders, as the materials are so dry and dense they can be fed direct to extruders for pellet production.With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.

Year of construction: 2019, operating hours: 0 h, condition: new, machine/vehicle number: Al160, Compact size, high productivity food processing machine: Cabbage Shredder is productive, compact size commercial cabbage shredding machine that is intended for cabbage shredding, slicing, grating as well as beets, carrots grating, julienne cutting. High productivity 500-1000 kg/h, high-quality materials as food grade stainless steel AISI 304. Made for small and middle size producing companies. General Features: • Productivity 500-1000 kg/h; Ksdpfxsdwfdqo Affefa • High quality, longlasting stainless steel cutting knives (up to 100 tons between sharpening); • Disc diameter of 40 cm, grants, that you can put whole or cut in half small cabbage heads; • The universal cutting machine, very good for slicing, grating, mashing, julienne stick cutting; • Compact size can be equipped with wheels and easily transported; • Easy to clean, can be washed with low-pressure water; • All food contact elements made of stainless steel; • Powder painted frame, three-layer lacquer in the standard version, or full stainless steel version • Machine motors can be adjusted as required up to 2200 W. • Electric connection 400/220/120 Volts, 50-60 Hz. For different connections, please, ask;

Condition: good (used), Strech film machine Kfsdpfx Ajp T Tz Aoffea Brand:Nissen Type:2400 Serie no:1469 Year:1999 Techn info: Rotating plate 2400mm in diameter Max hight wrapping approx. 2000mm Total hight column 2450mm Stock no:2001830BXM

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Very good technical and visual condition. The machine in continuous operation – test and presentation possible. Availability: January 2025 Location: European Union     Machine imported, installed, and under service care by the official GMB distributor. Only one user.   The best-selling model of GMB's automatic laminator.   A renowned manufacturer specializing exclusively in laminating machines since 1985. Exporting to 150 countries, GMB holds a 40% share of the domestic Chinese market and international exports.   Automatic Pallet Feeder Front and side-lay margin control Touchscreen controller Large diameter chrome-plated calender Kfodpfx Afovkg H Tefsa Electromagnetic heating – rapid heating within 90 seconds Stable operating temperature Hydraulic pressure Pneumatic sheet separation unit Anti-curl bar Automatic high-capacity stacker – pallet-based output   MODEL: SWAFM-1050 Max Sheet Size: 1050 x 820 mm Min Sheet Size: 300 x 300 mm Laminating Speed: 65 m/min Paper Thickness: 105 – 500 g/m2 Gross Power: 35 kW Total Weight: ok. 3000 kg Dimensions (szer. x głęb. x wys.) ok. 5800 x 2200 x 1900 mm Pressure system: Hydraulic Max. pressure in hydraulic system: 8 MPa

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 11218-20, The press is fully functional, in constant use. The press is fully functional and in constant use. Kfodewh R D Aopfx Affea The press is fully functional, in constant use.

Year of construction: 2023, operating hours: 0 h, condition: new, machine/vehicle number: 1234, Mobile fruit and vegetable processor unit Specifications: -Performance: end product 300 L/h maximum -Input capacity: 300kg/h -Electric demands: 10 kW, 400 V Kjdpfx Aeiu Hz Hsffsfa -Heating performance: 30 kW -Fuel: propane, PB, natural gas -Flue gas outlet: 60/100mm concentric chimney -Material: WNr. 1.4301, AISI 304 stainless steel -Dimensions: 6100x2200x2800 mm -Weight: ~2,3 tons (depends on the accessories and options) -IP65 certified electronics -Heat exchanger: soft water -Connections: DN 25 BUILT-IN MACHINES: -Custom made washer with grinder (openable, tiltable) -MKSP 300 belt press (automatic) -MKT 100 juice collector tank with pump (automatic) -Puffer tanks -MKPAG 300 gas fuelled pasteurizer (automatic) -BB TOP 180 semi-automatic filler or Bottle filler with 2 heads -Air compressor -High pressure washer Galvanized steel chassis with aluminium anti-slip floor, and aluminium superstructure. The two sides and the rear side is openable in 90° angle. The openable washer recieves the fruits. After the grinding and pressing, the automatic juice collector towards the juice to the puffer tanks. Then the automatic pasteurizer does the heat treatment, and in the final step, the operator fills the end product in bags or bottles. The machine is as automatic as possible, it needs only 2 workers to operate. Very easy to clean. Requires minimal maintenance. Options: -Diesel generator (10kW) -3,2 tons trailer -300L freshwater tank -300L waste water tank -Filtration system -Tent system -Custom graphic design on the outer surface

Condition: excellent (used), Year of construction: 2010, Year 2010 Kfodpfoqfga Sjx Affsa Format max 520 x 720mm Format min 200 x 250mm grammage 130g/m2 to 350g/m2 speed 20m/min pneumatic pressure touch screen display

Year of construction: 2024, condition: new, machine/vehicle number: S40Basic, Compact size, high productivity vegetable processing machine: ​ The commercial vegetable processing machine, cabbage shredder S40 is a productive, compact size commercial food processing machine that is intended for cabbage shredding, slicing, High productivity 500-1000 kg/h, high-quality materials as food-grade stainless steel AISI 304. Made for small and middle-size producing companies. General Features: Productivity 500-1000 kg/h; High quality, long-lasting stainless steel cutting knives (up to 100 tons between sharpening); Disc diameter of 40 cm, grants, that you can cut small cabbage heads that are sliced in half. Universal cutting machine, very good for slicing, grating, mashing, julienne stick cutting; (additional attachments) Compact size, can be equipped with wheels and easily transported; Easy to clean, can be washed with low-pressure water; All food contact elements made of stainless steel; Powder painted frame, three-layer lacquer in the standard version, or full stainless steel version(additional option) Machine motors 0.75kW in the ​standard version Electric connection 400/220/120 Volts, 50-60 Hz. For different connections, please, ask Kfedoffwgvjpfx Affea

Condition: used, functionality: fully functional, Fujifilm Luxel F-4080 Film Separator. The Luxel F-4080 is part of Fujifilm's Luxel family of image capture systems. It is a multi-laser imaging system that automatically scans a series of working images downloaded from a RIP server onto film, using an internal drum and a high-speed rotary device to scan the film. It processes the data for fast optical scanning, provides continuous film transport using a dual-cassette system, controls the delivery of cut and punched film to the developer, and controls the software system that manages all the main modules. A touchpad with menu windows in the form of icons and selectable buttons is used to operate the machine. Kjdpov Rr Aaefx Affofa Good working condition. Please check out our other listings as well.

Condition: new, functionality: fully functional, Year of construction: 2022, Complete extrusion line for the production of PVC shrink film, specifically designed for sleeve-label applications. Built in 2022 by RL Plastproject (Italy), the machine is brand new, never installed, and immediately available. Technical Specifications: Kjdpfxew Ahfge Affofa Product: PVC shrink film for sleeves Material: Rigid PVC dry blend Extruder: Single-screw with venting and gravimetric dosing Output: approx. 180–200 kg/h Film thickness: 40–80 micron Usable film width: up to 620 mm Die width: 900 mm Line speed: up to 60 m/min (depending on film) Cooling: Calender with chill roll Orientation: Transverse shrink forming unit Corona treater: Integrated Winding: Dual-position slitter-rewinder Control system: Siemens PLC with touchscreen HMI Installed power: ~220 kW (to be confirmed) Air requirement: 6 bar Footprint: approx. 25 x 6 meters

Condition: good (used), Year of construction: 2015, operating hours: 5,842 h, functionality: fully functional, machine/vehicle number: 2/362594/15, input voltage: 400 V, compressed air connection: 6 bar, input current: 25 A, input frequency: 50 Hz, nominal power: 13 kW (17.68 HP), Equipment: documentation/manual, This is a "Meurer Filmline CMB 600 machine", which is no longer in use due to a change in the product range. Shrink film packaging machine with shrink tunnel FILMline CMB 600 The machine is immediately available, has no defects, and is in excellent condition. The current operating hours are 5,842 hours. The dimensions of the machine can be found in the attached document. The machine has been serviced regularly and can be inspected if required. In addition, all original operation manuals (in German and English) as well as electrical diagrams are available in duplicate as folders. Banding performance: 35 products/min Kfjdpfx Afswxtktofja Bundle capacity range: 1x5 / 1x10 Product dimensions X/Y/Z min./max.: 120mm x 120mm x 70mm / 265mm x 125mm x 38mm Bundle dimensions X/Y/Z min./max.: 228mm x 265mm x 125mm / 350mm x 120mm x 120mm Machine dimensions X/Y: approx. 3300mm / 3020mm A video of the running production can be provided on request.

Condition: used, Year of construction: 1999, functionality: fully functional, total length: 2,000 mm, total height: 1,700 mm, total width: 1,700 mm, overall weight: 800 kg, Film packaging machine with shrink tunnel. Ksdpfx Aswr Apfoffefa The BVM Brunner Compacta 4010 is a fully automatic side-sealing packaging machine for packaging products in semi-tubular film. It seals the film on three sides and achieves up to 100 cycles per minute. The machine is particularly suitable for the book, textile, and shipping industries, processes various types of film, and can be quickly adjusted to different product sizes. Ideal for efficient and flexible packaging. No guarantee for technical specifications. The machine is checked and cleaned. EXW. On request, we also offer service and installation of the machine.

Year of construction: 2016, condition: new, functionality: fully functional, HDPE Film washline construction year: 2016 0 working hours (was never in operation) brand: NEUE HERBOLD, D-74889 SINSHEIM consisting of: Kfsdpjtuui Djfx Affea Wet-granulator type SM 450/600-S5-2 Friction washer type FW 560/3000 Conveying screw Floating tank (Floating - sink separation) type TB 500 Mechanical Dryer type TM 1005 Suction Unit type MFT 55/500 Electric control

Year of construction: 2009, condition: good (used), - Fully automatic - Package height max. (mm): 650 - Package height min. (mm) :15 - Package width max. (mm): 1250 - Package length min. (mm): 300 Kfsdpfx Afopu Anmefja - infeed conveyor (mm): approx. 2.000 x 1.300 x 900 - Outfeed conveyor (mm): approx. 2.000 x 1.300 x 900 - Outfeed table - Overall dimensions (mm): approx. 8,000 x 3,000 x 2,200 - Total connected load (kW): approx. 5

Condition: as good as new (ex-display), Falling-film evaporator – unused – Kodpfxsd Hb Acs Affsfa The machine consists of three units that need to be connected in series: - Evaporator (58 pipes), Length: 12.000 mm - Condenser (19 pipes), Length: 15.000 mm - Condenser (48 pipes), Length: ca. 15.000 mm All units are unused and made of stainless steel (AISI 304 / 1.4301). The evaporator was designed for the production of protein powder (dairy industry) and represents the final element of a drying chain. It evaporates the remaining water in the dryer and thus leads to a high concentration of the end product. Since the units have never been in use, they are in excellent quality. Sale without electrical components or control panel.

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: K500-50739, total length: 14,000 mm, total height: 2,500 mm, total width: 3,600 mm, type of input current: three-phase, product height (max.): 100 mm, product height (min.): 30 mm, product length (min.): 500 mm, product length (max.): 1,800 mm, product width (max.): 1,500 mm, product width (min.): 600 mm, input voltage: 400 V, compressed air connection: 6 bar, input current: 33 A, working height: 900 mm, table width: 1,700 mm, table length: 2,000 mm, passage height: 250 mm, year of last overhaul: 2022, workpiece weight (max.): 100 kg, Equipment: documentation/manual, Dimensions of the entire machine: Width: 3,600 mm Length: 10,600 mm (without feed and deposit areas) Height: = 2,500 mm Working height: 900 + 50 mm Feed rate: 13 - 23 m/min (frequency-controlled) Properties of the PE shrink flat film • Shrink film suitable for the shrink sealing process. (Top and bottom films must be laterally sealable in the tunnel). • Biaxial shrinkage value of approximately 50-60% lengthwise, approximately 40-50% crosswise • Antistatic treatment. • Shrink film with needle perforation. Improves the shrinking process and has higher gas and water vapor permeability. Shrink film to be used • Biaxially shrinking, needle perforated. • Spooled on rolls, sound-tight and with straight edges. Foil thickness: Application: approx. 40 - 60 μm. Film widths: Application: 800 mm, 1100 mm, 2000 mm Roll outer diameter: max. 350 mm Kodpfx Ajvvlyisffofa Core outer diameter: min. 90 mm Bottom film calculation: Package width + 200-250 mm Top film calculation: Package width + (2 x height) + 200-250 mm Technical component data: Conveyor belts: Infeed conveyor (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. Roller conveyor behind the tunnel (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. KFE standard film wrapping machine: Max. film roll width, top and bottom: 2,100 mm / Package height (passage height): max. 250 mm / max. Film roll diameter: 350 mm Film thickness: approx. 40-60 µm high-quality PE film / Weight: approx. 3,100 kg Side sealing: Sealing bar length: 1,850 mm / Adjustment range: 500 - 1,600 mm / Adjustable feed rate: 13 - 23 m/min. Shrink tunnel ST / lI -1800 -3000 -300: Clear hood opening: 1,860 mm wide / 300 mm high / Hood length: 3,000 mm / Transport length: 3,560 mm Adjustable feed rate: 6 - 23 m/min. The machine can be inspected at the production site.

Condition: good (used), Bosch DM 4K 9301-D 1070083676-111 Technical data: Version: V0.00.4 670V-705V DC *New price: 6850,-€ Item condition: Used, in perfect condition There may be slight differences in appearance and revision status, as there are several items. More power tools - new and used - you will find in our store! International shipping costs on request! Kfsdpfoivdrnox Affsa Power tools and other products buy cheap - Here you buy goods from the professional for the professional - In our SHOP you will find more attractive offers

Condition: used, Year of construction: 2004, A film sealing machine is for sale. Type: KW 8060 Universal Year of manufacture: 2004 Kedpfx Aov Hx Nxeffefa Machine number: RZ 05.04.105

Year of construction: 2025, condition: new, functionality: fully functional, Chain for Multivac packaging machines, the so-called film transport chain (clamp chain) 5/8 inch CRG. Kfjdpfx Afev Dhnxofea Suitable for all models. The chain is sold by the meter! Chain for Multivac packaging machines, the so-called film transport chain (clamp chain) 5/8 inch CRG. Suitable for all models. The chain is sold by the meter!

Condition: new, Year of construction: 2025, functionality: fully functional, This UV DTF printer digital flatbed printer - replaces the current laser printers - also color prints on glass, wood, textiles, plastic, metal and many other materials. Easy peeling and sticking on many surfaces! New model: UV4060DTF Printhead: Epson TX800 2690 dpi max. Including software for printer and image processing Ksdpfx Afog Icd Ssfofa Dimensions: 800*858*566mm Weight: 70kg A3 size 31x55cm and 23cm height possible 5x500ml color can be included!(extra charge) Software setup and printer explanation gladly if needed. Germany/Europe. (Surcharge) Print videos etc. can be sent gladly by Mail/WhatsApp.

Condition: used, Film Densitometer Techkon RT112 without accessories, with battery Kfjdpsr Drtkofx Affsa

Condition: used, gusseted bags 1,500 x 2,600 mm thickness 0.100 mm 15 bags / roll price per roll Ksdpfx Afscw Tuvjfofa 4 rolls on stock

Condition: used, gusseted bags 1,150 x 2,700 mm Kfodocw Tuwepfx Affoa thickness 0.100 mm 11 bags per roll price per roll 6 rolls on stock

Year of construction: 2012, condition: used, flat film 6,000 mm x 50 m Kfedpfxocw Tuuo Affea thickness 0.100 mm colour - blue price per roll