Used Field Rollers for sale (9,645)

Condition: used, Year of construction: 2006, machine/vehicle number: 191014, Power: 80 kW, unladen weight: 4800 kg Hedpfx Agjy Rvn Se Isfg

Condition: used, Year of construction: 2007, Unladen weight: 1330 kg Hjdpfxjy Rvrdo Ag Ijfg

Condition: used, Year of construction: 1987, material width 800 mm material thickness 0,4 - 2,5 mm no. of straightening rolls 8 straightening roll diameter 53 mm number of draw-in rolls 2 diameter of draw-in rolls 160 mm material thickness at 800 mm material width (Niro) 0,6 mm material thickness at 800 mm material width (steel 1,0 mm material thickness at 150 mm material width (Niro) 2,5 mm material cross-cut 975 mm² speed - 35 m/min power requirement 2,1 kW weight 7,0 t Hfedpfoy Ruttox Ag Ieg dimensions (WxDxH) 2,0 x 2,0 x 2,3 m Straightening machine RM 8-53/160-800 with infinitely varibale drive, motoric driven straightening rolls, supporting rolls, hydraulic lifting of the roller cassette, motorized adjustment of the rolls, hydraulic threading wedge, side guidance at the inlet

Condition: used, Year of construction: 1987, material width 120 mm material thickness 0,2 - 4,0 mm no. of straightening rolls 19 straightening roll diameter 24 mm material cross-cut 2 - 120 mm² 40 mm bending speed 5 - 25 m/min power requirement 2,5 kW Hodpeynmpajfx Ag Iefg weight 0,85 t dimensions (WxDxH) 1,2 x 1,7 x 1,6 SPECIAL DEAL as is where is, IN NEED OF OVERHAUL WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1984, material width 250 mm Hfjdpfsvuk Sbsx Ag Isg material thickness 0,2 - 2,0 mm no. of straightening rolls 7 straightening roll diameter 60 mm run-in height 1250 mm speed 5 - 30 m/min power requirement 2,2 + 1,3 kW Weight 0,65 t dimensions (WxDxH) 1,05 x 1,25 x 1,5 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1996, material width 500 mm material thickness 0,3 - 3,0 mm no. of straightening rolls 5 straightening roll diameter 40 mm number of draw-in rolls 2 Hfedpfx Ajvuum Nsg Isg diameter of draw-in rolls 80 mm material cross-cut 600 mm² material thickness at 500 mm material width 1,2 mm material thickness at 200 mm material width 3,0 mm power requirement 4,0 kW weight 2,0 t dimensions (WxDxH) 1,5 x 1,5 x 1,9 m with motor, upper straightening rolls individually manually adjustable, neumatic adjustment of the infeed rolls, coil loop control via ultrasonic sensor

Condition: used, Year of construction: 2017, operating hours: 704 h, 2017 | Wacker Neuson RT 82-SC3 | Used Tandem Roller | 704 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 9600 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 30 inspection points 29 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good overall and operational condition. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40162 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available Hfedpfx Asy Ruiuog Ijg ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Technical details: Hfedpfx Agjy Rru Ij Ieg floor-plate length: 4000 mm plate width: 1500 mm plate height: 450 mm Plate thickness: - mm weight of the machine ca.: 5,9 t transport dimensions LxWxH: 4,0 x 1,5 x 0,45 m There are 6 of these clamping plates for sale. (price per piece) Material cast steel/profile casting T-slots according to DIN 650: a=43; h=105; b=76; c=50 mm; center distance 375 mm 4x passage holes Ø 90 mm 10x fixing holes Ø 25 mm with countersink Ø 85 x 135 mm with base frame for shelf no. 1+3+4+5+6: L: 1990 mm x W: 1490 mm x H: 185 mm with base frame for panel no. 2: L: 2020 mm x W: 1515 mm x H: 520 mm *

Condition: used, Year of construction: 2003, total length: 3,000 mm, total height: 1,700 mm, total width: 1,000 mm, Colour: White Hodpoxwuwvofx Ag Ijfg Empty weight: 1.000 kg Price: On request - Year: 2003 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 30058 B - Max. working width [mm]: 1320 - Min. throughput height [mm]: 3 - Max. throughput height [mm]: 100 - Number of rolls [pcs]: 2 - Transport dimensions: 3000mm x 1000mm x 1700mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, We offer roller shells made of alloyed cast iron, ductile iron, and chrom steel. Manufacturing is carried out according to your technical requirements and drawings. Hjdjy N S S Rjpfx Ag Isfg The certificates will be provided.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, input voltage: 230 V, warranty duration: 24 months, working width: 180 mm, total width: 280 mm, total length: 475 mm, total height: 280 mm, DGUV certified until: 06/2028, type of input current: AC, conveyor belt width: 180 mm, NEW NEW +++ Bread Roll Moulder +++ NEW NEW Sinmag Model: Piccolo Dough portion approx.: 20 to 80 grams Performance max. 2,000 pcs/hr Hedpfx Agoqy A Swe Iofg Simple, robust technology Max. moulding length: 180 mm Only from us: DGUV V3 tested Connection: 230V Dimensions: 280 x 475 x 280 mm (W x D x H) Brand new machine, SAB tested 24 months warranty + spare parts service Options: Delivery service Maintenance contract Service package Training & commissioning Leasing & rental service More top bakery machines in stock!

Condition: used, Year of construction: 2007, operating hours: 1,501 h, Equipment: all wheel drive, Stock no. 5806 Ammann Tandem Ride-On Vibratory Roller Type AV16-2 ----* Manufacturer: Ammann * Model: AV16-2 * Year of manufacture: 2007 * Color: Yellow * Recorded operating hours: 1,501 hours * Weight: 1,580 kg * Drum width: approx. 0.90 m * Maximum working width: approx. 0.94 m * Transport length: approx. 2.25 m * Transport width: approx. 0.90 m * Transport height: approx. * Articulated steering * Gradeability: approx. 30% with / 40% without vibration * Yanmar diesel engine, 15.7 kW / 21 HP * Water tank: approx. 95 liters * Diesel tank: approx. 26 liters * Hydraulic oil tank: approx. 25 liters * Dual drive * Dual vibration * Pressurized water spray system * Central lifting point for crane loading * Foldable ROPS (roll-over protection bar) Hfjdpfxsy Sq Uij Ag Ijg Note regarding possible errors in this listing: Despite careful preparation of this listing, occasional errors may occur in the text or the stated details. We accept no liability for mistakes, changes, or prior sale. All information is provided without guarantee. Please contact us to verify details or for any further questions.

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 2,050 mm, sheet thickness (max.): 12 mm, STANDARD EQUIPMENT Hedpfx Agow Slcte Iefg Steel construction main frames Hydraulic upper roll opening head Movable control panel Centrally driven rolls powered by motor Hydraulically adjustable rear and lower rolls Precision bending with braked main motor Conical bending and pre-bending system Lower and upper roll drive by planetary gearbox Rear roll ball support system to facilitate sheet movement Compliance with EU safety directives High-strength forged steel rolls made of SAE 1050 (CK45) certified steel Hardened shafts Digital readouts (2 units) Operation manual OPTIONAL EQUIPMENT Overhead crane (elevator) for support in large diameter bending Hydraulic side supports for assistance in large diameter bending Ground and polished rolls Wire grooves at shaft ends NC control unit Dual speed operation Stepless speed adjustment Ejector system Hydraulic motor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 8/10 mm Bending Capacity: 10/12 mm Upper & Lower Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4000 mm Width: 1200 mm Height: 1370 mm Weight: 4200 kg

Year of construction: 2026, condition: new, functionality: fully functional, Roller applicator for hot melt adhesive. Roller with adjustable speed from 18 to 30 RPM Heating with adjustable temperature in the range of 100 - 220°C Heater power: from 3 to 6 kW Available options: 300 mm, 400 mm, 600 mm, 800 mm, 1000 mm, 1200 mm. Hjdpfxjy Sn S Eo Ag Isfg

Condition: used, functionality: fully functional, Year of construction: 1990, operating hours: 1,681 h, Bitelli DTV100 Grifone tandem roller Operating weight: 10,000 kg Hfedsy Slq Espfx Ag Ijg Engine type: Deutz BF4L 913 Turbo Double drive Hydrostatic vibration on both drums Compaction width: 1,680 mm Working hours: 1901 Good overall condition WE EVALUATE EXCHANGES OF VEHICLES OF ALL BRANDS, MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, WITH CIFA, SERMAC, PUTZMEISTER EQUIPMENT; OR EARTHMOVING MACHINERY CATERPILLAR, FIAT HITACHI, KOMATSU

Condition: used, functionality: fully functional, Year of construction: 2023, working width: 6,000 mm, Meadow harrow (unused) with a 6-meter working width, Hodpfx Aox Ia T Hjg Iefg hydraulically foldable with additional skids for better gliding.

Condition: new, Year of construction: 2026, material width 100 mm material thickness 15 mm no. of straightening rolls 9 straightening feed 7 m/min total power requirement 0,75 kW Hfsdpjurni Ujfx Ag Iog weight of the machine ca. 380 kg dimensions of the machine ca. 710 x 920 x 1360 mm Features: - 5x driven lower rollers - 4x adjustable upper rollers - Max. cross-section approx. 800 mm² - Mobile use on casters - Operating instructions

Condition: good (used), Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers Hedophupmjpfx Ag Ijfg -Conveyor belt rollers: transport rollers diameter 56 mm -Transport width: 335 mm -Shaft: recording M8 -Quantity: 17x transport rollers available -Price per piece -Total dimensions: Ø 56 x 345 mm -Weight: 2.6kg/piece

Condition: used, Year of construction: 1988, Technical details: Hfsdpsu N Drusfx Ag Isg floor-plate length: 4000 mm plate width: 2000 mm plate height: 460 mm weight of the machine ca.: 6000 kg 2 pieces cast steel plates for sale free. T-slots according to DIN 650 a=40; h=56; b=74; c=28mm; center distance of T-slots = 250 mm The plates are equipped for lateral fixing. *

Condition: excellent (used), functionality: fully functional, Roller conveyor with a length of 5 m, with the option to disassemble it into smaller elements for transport (possibility of cost-efficient shipping within the EU) Hodey Sinhjpfx Ag Ijfg

Condition: used, Year of construction: 2018, operating hours: 706 h, Empty weight: 2.810 kg Make of engine: Kubota Please contact Kristoff Van Havere for more information - Perfect condition ! Hodpfoy Sfdfox Ag Iefg

Condition: used, Year of construction: 2018, operating hours: 522 h, Please contact Kristoff Van Havere for more information Hfjdpfsy Sfc Iex Ag Ijg - Perfect condition !

Condition: excellent (used), CATALOGUE NUMBER 7554 Technical specifications: - Roller width: 1350 mm Hedpsy N At Eefx Ag Iefg - Max. pass-through height: 70 mm - Glue application: single- or double-sided - 2-roller system - Diameter of glue application rollers (top/bottom): 160 mm - Main motor: 0.75 kW - Dimensions (L/W/H): 2000x750x1550 mm - Weight: approx. 534 kg ADVANTAGES – German manufacture – Used glue applicator – In very good condition Net price: 13,900 PLN Net price: 3,300 EUR (based on an exchange rate of 4.2 EUR) (Prices may vary with significant fluctuations)

Year of construction: 1993, condition: good (used), motorised transport table with rollers and. var. speed dimensions L x W x H = 2950 x 1300 x 900 mm feed speed var. height adjustable +/- 15 cm max. weight load 50 kg/ m Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!) Hodpfjgvvn Eox Ag Iefg

Condition: used, Year of construction: 2007, operating hours: 1,670 h, Year of manufacture: 2007 Empty weight: 2.586 kg Hjdpfx Aey Nwv Ijg Ijfg Dimensions (LxBxH): 248 x 128 x 180 cm