Used Fecken Kirfel Aachen Germany for sale (11,310)

Condition: new, M&S Gruseck GmbH NEW Screening Drums from the Market Leader – 100% MADE IN GERMANY! Screening drum suitable for a Doppstadt SM620 Square staggered perforation (QV) 15mm Bdjdpoxnyqiofx Af Tsk Sheet thickness = 6mm !!! More than 500 manufactured screening drums per year speak for themselves !!! - Premium quality! - Consistently tested! True running during operation! - Best price-performance ratio - Short delivery times! - Stamped perforations for perfect screening results! - Various perforation patterns (square, round, honeycomb, etc.)! - Small webs for optimal screening surface! - Different sheet thicknesses available! - Various materials possible (at least S355 grade)! - Special customer requests are not a problem for us – they are our specialty! - All drums are painted! - Large stock selection! - For all common screening machines!

Condition: good (used), Year of construction: 2012, operating hours: 12,078 h, functionality: fully functional, pressing force: 88 t, filling opening width: 1,100 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 750 kg, overall weight: 30,000 kg, oil tank capacity: 2,000 l, power: 98 kW (133.24 HP), volume flow: 643 m³/h, Technical data baler: Manufacturer HSM GmbH + Co. KG, Germany Type VK 8818 R-FU Year of construction 2012 Total operating hours: 12,078 hours, as of September 2025 Pump operating hours 6,616 hours (effective pump running time) Number of bales pressed: 65,792 bales, as of September 2025 Main press force 880 kN Specific pressing force 120 N/cm² Pressing force cutting edges free rammer 120 kN Dimensions of feed chute 970 x 1,800 mm Theoretical cycle time in idle mode 8.3 seconds Theoretical throughput capacity 643 m³/hour Bale dimensions 1,100 x 750 mm, the length is variable 600 up to 2000 mm Drive power 2 x 45 kW frequency-controlled Connected load 98 kW Total current consumption 192 A Fuse protection 250 A slow-blow 5-fold horizontal tying, fully automatic Bedpjxcngnefx Af Tedk Throughput rates with a bulk density of 20 kg/cbm 12.86 t/hour Bulk weight of 50 kg/cbm 32.15 t/hour Bale weights with a bale length of approx. 1.2 m 650 up to 750 kg/bale, depends on materiel Hydraulic oil tank capacity 2000 litres PLC control Siemens S7-300 Siemens TP 700 control panel Press dimensions assembled 18,000 x 4,300 x 3.270 mm (l x w x h) Press dimensions with conveyor system 18,000 x 22,000 x 5,765 mm (l x w x h) Transport weight baler approx 30 t (Main press approx. 20 t, press channel with bale clamp approx. 10 t) Special machine equipment: Access locking by means of key transfer system Electro-hydraulic locking of the press carriage during the tying process so that the press plunger does not change position with highly expansive materials Additional optional equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40 % energy savings compared to the standard motorisation 2 x 45 kW, with the same power output Manual switch-off or switch-on of the number of strapping wires to save on strapping wire for non-expansive material Cutting-edge frei rammer with 121 kN pressing force Sensory wire monitoring, with press switch-off in the event of wire breakage or wire end Bale chute Visual warning signal, mounted on the control cabinet Condition of the baler: The entire baling system (baler and conveyor belt) is in good, operational condition. Technical data for the chain belt conveyor: Manufacturer Stadler Anlagenbau GmbH Typ chain belt conveyor KF 1800 Year of construction 2012 Drive power 7.5 kW Belt speed 0.05 – 0.4 m/second Length of feeding conveyor 6,000 mm Height of side wall from feeding conveyor 400 mm Length of incline conveyor 9,000 mm Height of side wall from incline conveyor 800 mm Length of gooseneck 1,500 mm Incline 30° Nominal width 1,800 mm Useful width 1,700 mm Belt quality EP-500/4 Steel cleats on the rubber belt 50 x 50 mm Hollow pin chain, pitch 125 mm, rollers 36 mm Height of drive axle above ground 4,284 mm Overall height of conveyor belt 5,765 mm Transport dimensions of feeding conveyor approx. 7,000 x 2,200 x 1,250 mm (l x w x h) Transport dimensions of the incline conveyor 13,000 x 2,500 x 2,900 mm (l x w x h) Pit dimensions for the conveyor belt 14,765 x 3,260 x 1,250 (l x w x h) Scope of delivery: The conveyor belt, baling press with bale chute, and wire drawing stations are available for sale, but without the wire. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2004, CNC lathe IRLE - IWDS 1000 CNC MACH-ID 7758 Make: IRLE Type: IWDS 1000 CNC Control: SIEMENS 840D Year: 2004 Bodpfxopdp N Io Af Tjdk Double carriage with 4 position revolver and 840D Siemens Steady rest 200 - 1090 mm Roller rest 860 - 1090 mm 4 chuck 1350 mm Clamping from 200 - 1100 mm Bed width 2000 mm Stoke X Axis 950 mm Stroke Z Axis 14900 mm Specifications Metric US Standard Swing over bed Ø 1400 mm Swing over cross slide Ø 1100 mm DBC Turning Length 13000 mm Spindle power 129 kW Workpiece weight 20000 Speeds / ranges 1 - 300 Rpm Feed rate X-Axis 4500 mm/min. Feed rate Z-Axis 4500 mm/min. Dimensions (Estimate) Length 20000 mm Width 3380 mm Height 2200 mm Weight 100000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), For sale: Single TC40xER16x100-AD tool holder (SK40 standard) from the renowned brand ZÜRN – Germany. Each tool holder is complete, equipped with an ER16 collet and a mounted tool (drill or milling cutter – see photo). Tool holder type: TC40xER16x100-AD (SK40). Collet: ER16 – ZÜRN Germany. Working length: 100 mm. Manufacturer: Made in Germany. Tool included – ready for use. Very good condition, original, tested. Applications: CNC machining centers, milling machines, tool workshops. Bdedpfx Ajxcb Dajf Tok

Year of construction: 1995, condition: refurbished (used), Wire mechanical descailer with brushes and dust collector Made in Germany YOM - 1995. FULLY REFURBISHED... LIKE A NEW !!! Bodpfx Afjhz T Rxs Tjdk

Condition: new, FEATURES: • solid and stable machine construction made of ground granite components • small footprint due to compact design high frequency spindle with up to 2 kW power and 50.000 rpm • HSK-E 25 change system • HSC control technology with a block processing time in real time < 1 ms • high path accuracies due to digital length measuring system • high load linear guides • low maintenance linear motors in X, Y, Z • Heidenhain® TNC 640 control • zero point clamping system in the granite table for fast change from 3 to 5 axes OPTIONS: Bsdolnk E Sjpfx Af Todk • 3D measuring probe for detecting workpiece zero points or re-measuring workpieces • laser for non-contact tool control • high frequency spindles up to 100.000 rpm 4th/5th axis as rotary/swivel axis • Minimum quantity cooling lubrication system • Various controls from Heidenhain® • Manual control unit Professional CAD/CAM solutions The PREMIUM 5030 is a 3 to 5-axis HSC milling machine, that is specially designed for the requirements of highprecision processing of fine mechanical small parts, microprocessing and milling graphite/copper electrodes. In order to meet with this demand for accuracy, all essential points are integrated in the machine concept for reliable production. The solid machine base, consisting of a natural hard rock granite portal with decoupled Y-axis, guarantees high stiffness and long-term stability. The individual granite elements are produced with an accuracy per DIN 876 / quality 00. The pioneering linear motor technology and the incremental measurement process guarantee maximum positioning accuracy with highly dynamic feed rates. Fastest control technologies (high-speed cutting) guarantee harmonic rail movements with maximum precision and simple user guidance.

Condition: new, M&S Gruseck GmbH NEW screening drums from the market leader – 100% MADE IN GERMANY! Screening drum suitable for a Doppstadt SM620 Square staggered perforation (QV) 12mm Bsdsxnyp Eopfx Af Tedk Sheet thickness = 6mm --- Over 500 manufactured screening drums per year speak for themselves --- - Premium quality! - Individually tested! Perfect concentricity during operation! - Excellent value for money - Short delivery times! - Punched perforations for optimal screening results! - Various perforations available (square, round, honeycomb, etc.)! - Narrow web spacing for maximum screening surface! - Various sheet thicknesses! - Various materials available (at least S355)! - Special customer requirements are not a problem for us—they are our specialty! - All drums are painted! - Large selection in stock! - Compatible with all common screening machines!

Condition: used, Capacity 2800 Watt Bdodpsf D Tm Defx Af Tok volume 100 L filter HEPA 230 mbar material INOX Edelstahl Behälter 5000 mm hose diam. 32 mm 5000 mm noise 82 dB dimensions LxBxH 50 x 50 x 135 cm weight 35 kg

Year of construction: 1980, condition: good (used), Gubisch planer and moulder 172/7 S/N 3425 80 Year of manufacture 1980 length of the planing table 1950 mm planing width maximum 170 mm planing height maximum 120 mm Spindle diameter 40 mm 7 planing shafts : 1.bottom planing shaft 7,5 kW 2.right joining shaft 3,0 kW 3.left shaft 4,0 kW 4.right shaft 4,0 kW 5.Top Thickness Shaft 4.0 kW 6.Top Thickness Shaft 5.5 kW 6.Uni shaft top / bottom 3,0 kW Voltage 380 V, 50 Hz Power consumption 33.6 Kw Feed motor 1,5 kW Feed speed infinitely variable 5 - 30 m/min. weight 3300 kg Bdjdpfxsgrmyme Af Tjk Dimensions ( L X W x H )4800 mm x 1400 mm x 1850 mm technical data under reserve

Condition: excellent (used), For sale: Complete set of ATORN Germany tool holders – high quality, premium brand Hahn+Kolb. Technical specifications: • Manufacturer: ATORN • Model: 20723200 • Standard: DIN 69871 SK40-1/10-100 • Length: 100 mm • Set includes: several pieces, some with mounted drills (see photos) Condition: Very good, practically stored as new. Only used for testing, no operational wear. Suitable for CNC machining centers and milling machines. Bdodpfxjw Ulrao Af Tsk - Price per piece.

Year of construction: 1995, condition: refurbished (used), Mechanical descailer with brushes and dust collecting unit Bodpfxegi N Nnj Af Tedk Made in Germany YOM - 1995. Fully refurbished in 2021.

Condition: new, Features > 5-axis simultaneous CNC machine > Basic structure made of polymer concrete > Wet/dry machining > Workpiece zero-point clamping system > Servo drives with absolute encoder > Integrated control with touchscreen Bedpfx Aohqhkief Tsdk Options > Machine base frame > Various Zero-point clamping devices: T-slotted plate, four-jaw chuck, precision vice and blank holder > Automatic placement system > 3D measuring probe > Why buy? Simply finance. Talk to us! The iMG 1010 is a compact solution for processing workpieces up to 100x100x100 mm. With its basic structure made of polymer concrete, it enables precise processing of numerous materials such as titanium, steel, CoCr, ceramics, sapphire, zirconium or aluminum. Particularly noteworthy is the arrangement of the Y-axis, which ensures high stability and enormous vibration damping thanks to its installation positions. Almost all positions on the workpiece can be reached without reclamping. The selection of workpiece clamping devices and holders in conjunction with the zero-point clamping system makes the machine a versatile machining center. Its design enables wet/dry machining without time-consuming retooling. The CNC machine can be extended with an optional loading and unloading system, which accesses the machine room from the right, left or from above. This allows workpieces to be changed automatically. The zero-point clamping system serves as an interface and ensures the exact and repeatable positioning of the workpiece. The system can be integrated into network-controlled, automated production processes using software interfaces. The maintenance-friendly design and the long-lasting direct spindle drives save service costs and time and offer a reliable machining system. During the design phase, care was taken to ensure that all elements are easily accessible and yet protected from external influences in order to guarantee a long service life. The sophisticated system offers numerous options for expansion.

Condition: new, M&S Gruseck GmbH Bdedsxnyl Tepfx Af Tsk NEW screening drums from the market leader - 100% MADE IN GERMANY! Screening drum suitable for a Doppstadt SM518 Square staggered perforation (QV) 30mm Sheet thickness = 8mm !!! Over 500 screening drums manufactured per year speak for themselves !!! - Premium quality! - Always tested! True running in operation! - Best price-performance ratio! - Short delivery times! - Stamped perforations for perfect screening results! - Various perforations available (square, round, honeycomb, etc.)! - Narrow webs for optimal screening surface! - Various sheet thicknesses! - Different materials available (at least S355)! - Special customer requests are not a problem for us – they're our specialty! - All drums are painted! - Large stock selection! - Suitable for all common screening machines!

Condition: good (used), length 5 meter. working diameters 220 mm - 600 mm Bodpfx Afev Scfzs Todk

Condition: as good as new (ex-display), vacuum drying oven Inside: 700 x 700 x 600mm deep Heating capacity: 3 KW Temperature range 1-120°C Outer dimensions: 1280 x 950 x 1280 Pressure range: Atmosphere - 0 Bar (Not suitable for overpressure) Bjdpofbl T Nsfx Af Tjdk A suitable vacuum pump is provided depending on the application. Supply line: 3ph , N, PE 400V, 50Hz CEE plug The interior installation can of course be completely removed!

Condition: excellent (used), For sale: a robust measuring device from the renowned German manufacturer AbaWerk Aschaffenburg. Made with a cast iron base and equipped with two hardened centering points for securing shafts and cylindrical workpieces. Perfect for use with toolmaker’s microscopes, measuring projectors, and in quality control applications. Technical specifications: • Manufacturer: AbaWerk Aschaffenburg (Made in Germany) • Center distance: approx. 115 mm • Stable, heavy cast iron base – secure clamping • Allows rotation of the workpiece between centers • Condition: used, fully functional Bdodpfx Ajw Sav Iof Tek Manufactured to industrial standards – precision and durability make these units highly sought after in metrology and toolmaking environments.

Year of construction: 1998, condition: as good as new (ex-display), Wire chemical treatment cleaning unit FULLY refurbished with ALL brand new parts except chassis. Bdedpfsfhw Uysx Af Tsk Please contact us for more details. Thank you!

Condition: new, functionality: fully functional, machine/vehicle number: 246203 xxxx, Ideal basis for setting up CNC machines and applications The FB2 flatbed unit is ideal for getting started with CNC technology and is ideal for model making and hobby applications. The FB2 is also often used in industry for measuring and dosing technology, as it offers extensive expansion options. The unit also offers access to the isel modular system. Various sizes from travels of 530 x 500 mm to 1030 x 1250 mm and extensions such as base frame and housing are available and can be individually combined. BEST SUITABLE FOR: • modular isel building block system • universal range of applications • easy handling • ideal for laboratory, model making and workshop use • assembly and mounting • printing and engraving • drilling and milling • dosing and screwing • forming and modeling • gluing and casting • soldering and welding • measuring and testing • sawing and cutting and much more Bdsdpfx Afjhqmame Tsk Z-passage = 190 mm (Z-passage = 300 and 500 mm on request!) FEATURES: • durable stepper motors in the 200 W range • reliable LES units with steel ball screws are installed as drives • clamping of workpieces using a T-slotted plate • available with and without protective cover • variable gantry apertures, depending on customer application OPTIONS: • iSA milling spindles and water-cooled HF milling spindles • Cooling spray device • Cold air cooling, Cool-Min • Automatic tool length measurement • Rotation units • Workpiece clamping systems (hand lever, vacuum clamping tables, etc.) • Suction systems • LED machine room lighting • RAL color selection • CAD/CAM-Software • Diffusers 190 mm, 300 mm or 500 mm • Powerful 4-axis control controller • Underframe • Enclosure with sliding/folding door

Condition: new, M&S Gruseck GmbH NEW Screening Drums from the Market Leader – 100% MADE IN GERMANY! Screening drum suitable for a Doppstadt SM518 Square staggered perforation (QV) 10mm Sheet thickness = 6mm Over 500 screening drums manufactured per year speak for themselves!!! - Premium quality! - Always tested! Smooth running in operation! - Excellent value for money - Short delivery times! - Stamped perforations for perfect screening results! - Various perforation patterns (square, round, honeycomb, etc.)! - Narrow webs for optimal screening surface! - Different sheet thicknesses available! - Various materials possible (at least S355)! - Special customer requirements are not a problem, but our specialty! - All drums are painted! - Wide range kept in stock! - Suitable for all common screening machines! Bsdpsxnylaefx Af Tjdk

Condition: excellent (used), For sale: professional tool holder from the renowned brand WNT Germany – model B40 ER16M A=100. The holder is equipped with a Centro-P Germany HPC16MS-DI precision collet, ensuring maximum accuracy and clamping stability. The set also includes a VHM drill, making it ready for immediate use on a CNC machine. Condition: very good, the holder is fully functional, no play, with normal signs of use. Premium-class equipment – ideal for professional machining centers where precision and reliability are crucial. Bdjdpfxew Rr A Dj Af Tsk

Condition: new, Portal machine - the space miracle! CNC portal milling machine for large traverse paths with small space requirements! ADVANTAGES: -optimized space utilization, completely free table clamping area -best possible chip protection due to overhead axes -particularly suitable for high and bulky components -PILZ safety technology -Windows 10 APPLICATIONS: -chipping -measuring and testing -dosing applications FOR MACHINING: -Aluminum / light metals Bdsdpfxohqhlve Af Tek -Milled plastics -Ceramics -Non-ferrous metals (brass, bronze, etc...) -Plastics -Wood Maximum functionality with minimum space requirements is the motto of the OverHead Gantry M. The basic machine can be optimally configured for many sectors and work areas using a variety of variable equipment features and additional options. The possible applications of the OverHead Gantry M include measuring, testing and metering applications in addition to machining. The power of the milling motor of up to 2.2 kW and 20,000 rpm and a traverse speed up to 250 mm/sec make it suitable for processing wood and plastic as well as light and non-ferrous metals. The free processing area and its excellent price/performance ratio off er decisive benefits compared to similar products. The OverHead® Gantry M is available in five different sizes for different process areas from M20 to M50. Do you require the control cabinet on the right-hand side or would you prefer the control panel to be on the left? No problem – we will be happy to accommodate your requirements. And of course we will take care of maintenance and support for your OverHead® Gantry M. Our service technicians can be reached by telephone and can attend to you quickly on-site as needed. In addition, we also off er our in-house isy-CAM 2.8 software and can advise you on your specific application. BENEFITS: -Optimal use of space -Free machining area -Fixed table, mobil portal -Variable clearance of 340- 590 mm -Also suitable for a large chip volumes SET UP: Portal: mobil, Table: Fixed

Condition: new, M&S Gruseck GmbH NEW screening drums from the market leader – 100% MADE IN GERMANY! Screening drum suitable for a Doppstadt SM518 Bodexnyhhjpfx Af Tjdk Square, straight perforation (QG) 20mm Sheet thickness = 6mm !!! Over 500 screening drums manufactured per year speaks for itself !!! - Premium quality! - Always inspected! True running in operation! - Best price-performance ratio - Short delivery times! - Stamped perforations for perfect screening results! - Various perforations available (square, round, honeycomb, etc.)! - Small bridges for optimal screening area! - Various sheet thicknesses! - Different materials possible (at least S355)! - Special customer requirements are not a problem for us – they are our specialty! - All drums are painted! - Large stock selection! - Suitable for all common screening machines!

Condition: new, machine/vehicle number: 280270 0001, ADVANTAGES: compact table machine simple operability 3-axis stepper motor control with path operation Ball screws 2-phase stepper motors CNC control software included ICP series - with stepper motor drive and path control GENERAL CNC machines of the ICP series are further developments of the proven CPM series. The introduction of a sliding door means that the machines can now be operated from a seated position, which results in shorter cycle times for hood opening, among other things. The chassis is completely bolted together instead of welded as in the predecessors. This results in greater precision when setting up the machine, as well as improved serviceability. Furthermore, the resonance and vibration behavior has been optimized, resulting in lower noise levels. X = 400mm Y = 300 mm Z = 140 mm Diffuser = 200 mm -in use for over 40 years!!! -over 20,000 systems sold. HIGHLIGHTS compact table machine simple operability 3-axis stepper motor control with path operation Ball screws 2-phase stepper motors CNC control software included Mosaic Safety Circle POPULAR MATERIAL Bsdpfxelkbpzs Af Todk Foam Plastics ACCESSORIES Length gauge Spindles (iFM1000ER, iFM1000WS) Quick clamping system Spannzangen Suction device

Condition: new, machine/vehicle number: 280261 0001, Features > CNC machine ready for mains connection > Low-noise due to maintenance-free servo motors > ergonomically slim design > powerful isel control with maintenance-free servo motors > reliable linear units with steel ball screws are installed as drives > effortless operation thanks to height-adjustable display Bodjlnikkspfx Af Todk > network-compatible control PC with WINDOWS > user-friendly soft-lift hood > clamping of the workpieces by means of T-slot plate options > milling spindle 500W - 1200W > Linear tool changing station > Tool cooling as cooling spray or air version (CoolMin) > Length measuring probe > Vacuum clamping table > Maintenance unit with valve terminal > Substructure table with swivel screen and integrated keyboard > Substructure table is used to install the vacuum pump, cooling unit and other peripheral devices > Automatic hood opening > Safety light curtain > Why buy? Simply finance. Talk to us! The iCV 4030 EC is a compact tabletop machine with a proven, optimized chassis design. A practical substructure table with monitor and integrated keyboard is available as an option. The CNC machine has a modular design; all control components, including the isel CNC control and the control computer, are installed at the rear and are easily accessible for servicing. All linear axes mounted in the machine are from the isel range; they run with linear ball bearings on ground precision steel shafts. Backlash-free ball screw drives with various spindle pitches are used as drives. The machine table made of face-milled T-slot profiles offers a wide range of clamping options for individual workpiece fixtures and clamping devices. The iCV 4030 EC is suitable for numerous areas of application and industries; experience has shown that it is preferably used for machining. A comprehensive range of accessories tailored to your application rounds off the program.

Condition: excellent (used), For sale: Professional Ziegler FP 8/8 Ultra Leicht fire-fighting portable pump (DIN 14420), manufactured in 1997 in Germany. This is a premium-class unit in the Ultra Leicht (Ultra Light) version, designed for easy transport and ergonomic operation. Technical specifications: • Model: FP 8/8 Ultra Leicht • Year of manufacture: 1997 • Rated output: 800 l/min • Rated pressure: 8 bar • Maximum output: 1030–1946 l/min • Rated speed: 4400 rpm • Gear ratio: 1:1 Engine: • 2-cylinder petrol engine, air-cooled • 12V electric starter Bsdpfexa Euqex Af Tjdk • Reliable and easy-to-service construction Condition: • Original hour meter: 142 operating hours – very little use • Pump is complete, fully functional, and ready for operation • All gauges, indicator lights, and controls are fully operational • Control panel with operating instructions in German Applications: • Volunteer & professional fire departments – for field or reserve units • Agriculture & industry – fast pumping of large volumes of water • Flood protection, emergency drainage • Firefighting equipment enthusiasts and collectors