Used Fast Radial for sale (3,879)

Condition: good (used), Year of construction: 2003, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine configuration • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable spindle speed programming • Stepless quill feed via three-phase servomotor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device Dimensions and Travel Ranges Tool holder SK 40 Column diameter mm 195 Table size mm 1200 x 750 Number of T-slots 5 Distance between T-slots mm 125 Quill travel (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle lower edge – table top min mm 70 / max mm 680 Distance spindle lower edge – floor min mm 970 / max mm 1580 Kwsdpoyuqmiefx Ahvsw Drilling radius mm 540 - 1590 Working table height mm 900 Machining Capacities Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 @ 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis AC servo motor kW 0.25 Y-axis AC servo motor kW 0.25 Z-axis AC servo motor kW 4.50 W-axis AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feed rate stepless mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axes over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easily readable from all sides, 215 x 160 mm Position indication: Cartesian or polar, values absolute or incremental Units: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions by machining operation, material-dependent cutting data suggestions Tool management: up to 500 tools Subroutine technology: yes Machining Cycles Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X,Y,Z axes, program re-start with selectable functions for targeted entry Zero point determination: Cycles for zero point determination by manual probing of the workpiece for: - arbitrarily mounted rectangular parts - arbitrarily mounted round parts - alignment of cast and flame-cut parts - angular position detection for round parts by probing reference edges or surfaces Test graphic: Graphical display of drilling patterns.

Condition: ready for operation (used), Year of construction: 1981, Available immediately from Swiss toolmaking facility: Rapid radial drilling machine HKS Model HKS 40 Year of manufacture: 1981 Morse taper MK 4 Drilling capacity: 40 mm Arm reach: 1120 mm Kwedpfjyvzb Iex Ahvsw Installation height: 780 mm Table size: 1520 x 560 mm 3-axis digital readout for table adjustment Spindle drive power: 3.8 kW Spindle speeds: 26 – 1940 rpm Quill stroke: 200 mm Feeds: 0.05 – 0.45 mm/min Thread cutting device Coolant system Total power consumption: 6.5 kW Hydraulic vice Weight: 2600 kg Offered at a price of EUR 2,500.— plus VAT ex location

Condition: good (used), Year of construction: 1999, Drilling capacity in steel (diameter): 60 mm / MK5 Kwjdpfxsyvy A Ro Ahvow Quill stroke: 310 mm Spindle speed: 28...2500 rpm Table size: 1470 x 986 mm Total power requirement: 4 kW Machine weight approx.: 4.6 t

Condition: like new (used), Donau Donauflex 135 High-Speed Radial Drilling Machine Manufacturer: Donau Model: Donauflex 135 Kedpfx Ahoyucahevsww Year of manufacture: 2020 Condition: Very good, used but like new Available immediately from stock.

Condition: excellent (used), Year of construction: 2003, column diameter: 400 mm, drill diameter: 65 mm, Drilling ; Tapping in all directions Can be moved in 7 axes Fast preparation, accuracy and performence on heavy and bulky parts. Kwodpfxjyub Spo Ahvsw Field using Turbines, Generators, Compressors, Steel Construction, Boilers Containers, Chemoical equipment, furnces of cement work and shipbuilding Arm Length: 2070mm Max. drill Ø cast: 65mm Max. tap Ø: 48M Stroke pinole: 350mm Max. distance spindle - table:1550mm Min. distance spindle - table:305mm Speeds / ranges: 900Rpm Spindle Taper: 5ISO/Bt/Mk Column sleeve: 400mm Power: 4kW Max. drill Ø steel: 50mm Length: 3500mm Width: 1325mm Height: 3400mm Weight: 6570kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Radial Drilling Machine EMA - arm lenght - 1220 mm - bore capacity in steel (diameter) - 50 mm - dimentions: 200X77X240, weight: 2250 kg Kwjdpfx Aeh Hnrbjhvjw - accessories included Made in Italy

Condition: excellent (used), Radial drilling machine Ksdsi If I Rspfx Ahvoww Brand: UCIMU Model: MS R1200 Voltage: 380V three-phase Dimensions: 210cm x 90cm x 248cm Dimensions of the vertical row: 55 cm Dimensions of the horizontal row: 76 cm

Condition: good (used), Year of construction: 1995, Used radial drilling machine from Foradia Kwodoytb Eyepfx Ahvow Model: GR 50 1200 Arm length: 1200 mm Drilling capacity up to: 50 mm Year of manufacture: 1995

Condition: used, Year of construction: 2006, total width: 1,600 mm, total length: 1,700 mm, total height: 1,700 mm, Weight: 500 kg Price: On request - Year: 2006 - Documentation available: No - CE certificate present: No - Serial number: 15600600437 - Main motor power [kW]: 5.5 - Max. cutting height [mm]: 130 - Max. cutting width at 90° [mm]: 470 - Max. saw blade diameter [mm]: 550 - Saw blade tilt angle [°]: 45 - Voltage [V]: 400 - Current consumption [A]: 12 - Fuse [A]: 16 - Power [kW]: 5.5 - Transport dimensions: 1700mm x 1600mm x 1700mm (l x w x h) Kodpfx Aeytbgdohvsww - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 15747225, saw blade diameter: 565 mm, cutting height (max.): 200 mm, total length: 2,800 mm, total width: 2,070 mm, extraction nozzle diameter: 60 mm, rotational speed (max.): 2,800 rpm, rotational speed (min.): 2,800 rpm, cutting length (max.): 1,140 mm, table length: 2,400 mm, table width: 1,580 mm, saw drive: 5,500 W, extraction connection diameter: 100 mm, spindle speed (min.): 2,800 rpm, spindle speed (max.): 2,800 rpm, height adjustment type: mechanical, saw blade bore: 30 mm, spindle motor power: 5,500 W, main saw diameter: 565 mm, saw blade speed: 2,800 rpm, Equipment: motor brake, saw blade guard, For sale: Professional MAGGI BEST 1250S radial arm saw. Year of manufacture: 2021. In actual use for approx. 3-4 years, only occasionally in a carpentry workshop, never in large-scale production, in very good technical and visual condition. The only flaw is the MDF worktable, which became warped after being removed for a period of time. However, the cost of a new 2800 x 2070 mm board is less than 500 PLN and the shape of the worktop can be customized. The machine is fully operational and ready for work. I issue a 23% VAT invoice, price is net. You can inspect the machine on site. Transport can be arranged at extra cost. Available immediately. The Maggi BEST 1250 S is a saw designed for processing solid wood and wood-based panels (MDF, chipboard, plywood, laminated boards, and similar materials) up to 3 meters in length, suitable for: • Miter cuts from 0° to 45° (to the left) • Vertical straight cuts (90°) and bevel cuts (0° to 45° left and right). It is referred to as a radial arm saw because it is equipped with pneumatic mechanisms specifically developed for making precise miter cuts in wood. The tool is user-friendly, while also being very precise and robust. CONSTRUCTION The saw features a solid steel frame, cast iron arm and base, and interchangeable guides made of hardened steel. The carriage, equipped with 8 bearings, ensures fast and precise sliding. Thanks to a 5.5 kW motor and a maximum cutting height of up to 200 mm, the machine is ideal for particularly demanding tasks such as beams and construction work. Quick adjustments are possible using the front crank for height regulation of the saw unit. This model has a maximum cutting width of up to 1140 mm. SAFETY A sound-insulated housing with total blade coverage and safety micro-switch, anti-kickback protection, properly sized worktable, and emergency stop button significantly enhance operator safety during operation. Kwedpfx Ajyhhz Rohvow TECHNICAL SPECIFICATIONS: Max. blade diameter: 565 mm Blade bore diameter: 30 mm Guard height above the table: 0 – 40 mm Max. cutting height with 565 mm blade: 200 mm Max. cutting length with 565 mm blade: 1140 x 20 mm (height) Min. cutting length with 565 mm blade: 970 x 200 mm (height) Max. cutting height at 45° tilt: 0 - 135 mm Cutting length at 45° right – min./max.: 675 – 785 mm Cutting length at 45° left – min./max.: 385 – 595 mm Motor: 5.5 kW Motor speed: 2800 rpm Dust extraction port in blade guard: 60 mm Dust extraction port at machine rear: 100 mm Table dimensions: 2400 x 1580 mm MAIN FEATURES: • Motor with electric brake • Steel, sound-insulated blade guard • Arm and base made of cast iron • Carriage runs on 8 bearings • Large rear cover with chip extraction port • Replaceable MDF worktable • Manufactured by the Italian company MAGGI • Made in accordance with CE standards

Condition: good (used), Radial drilling machine (used) Manufacturer: Mikrosa Year of manufacture: 2001 Model: SRB 35 Drilling capacity: Steel 35 mm, Cast iron 40 mm Thread cutting capacity: Steel M20, Cast iron M24 Spindle taper: MT 4 Spindle speeds: 20 – 2800 rpm, infinitely variable Automatic feed, stepless adjustment Spindle travel: 140 mm Arm reach: 1000 mm Table size: 1050 x 400 mm Column diameter: 200 mm Installation height: 600 mm Power requirement: 7.8 kW Footprint approx.: Width 1250 mm, Depth 2100 mm, Max height 2700 mm Weight approx.: 2000 kg Hydraulic clamping Thread cutting device Depth stop Lateral clamping surface Kwsdpeyu Hwdofx Ahvew Drill chuck 2 gearbox stages The machine is in excellent condition, runs very smoothly, and is ready for immediate use. Forklift available, free loading onto truck Affordable shipping possible Machine location: 48477 Hörstel

Condition: used, Year of construction: 1978, machine/vehicle number: 78004, type of input current: three-phase, We are offering this used Csepel 12UH/1600 radial drilling machine, year of manufacture 1978. Model: 12UH/1600 Serial number: 78004 Power type: 3~ Wiring diagram no.: 358000 If you have any questions or require further information, please feel free to send us a message or give us a call. Kjdoyh Uaqspfx Ahvsww

Condition: like new (used), Manufacturer: IBC Wälzlager Type: ARTB 200 Design: Axial-radial bearing Kwedpjyryfcjfx Ahvsw Inner diameter: 200 mm Outer diameter: 300 mm Width: 45 mm Item number: 221691 Drawing number: 90210001802 Marking: 13SS1R Partially unpacked for photography – unused item from warehouse clearance.

Condition: ready for operation (used), Year of construction: 2021, This 6-axis Fruitcore Horst600 Fast robot arm was manufactured in 2021. It features a nominal load capacity of 3 kg, a maximum range of 584 mm, and operates quietly at less than 70 dB(A). The robot arm is designed for a compact installation area of 382 × 200 mm and is protected by an IP54 class. If you are looking to get high-quality automation capabilities, consider the Fruitcore Horst600 Fast machine we have for sale. Contact us for more information. • Axes: 6 • Nominal Load: 3 kg • Max Range: 584 mm • Repeatability: ± 0.05 mm • Protection Class: IP54 • Noise Level: < 70 dB(A) • Weight: Approx. 30 kg Kjdpfx Ahox D Nbvjvjww • Power Supply: 230 VAC, 50–60 Hz • Ambient Temperature: 5 – 40 °C • Installation Area: 382 × 200 mm • Base Drilling Pattern: 200 × 100 mm • Standard Color: RAL 5021 (Aqua blue) • Dimensions: 313 × 174 × 446 mm (H × W × D) • Weight: Approx. 10 kg • Protection Class: IP20 • Power: 24 V / 7 A • Power Supply: 24 V / 2.5 A on tool flange • Like new, only 10 hoursFast version, which offers significantly higher processing speeds and optimised cycle times compared to the standard version. The robot was only operated for approx. 1–2 hours for testing purposes and is therefore in almost new condition – technically and visually flawless.

Condition: ready for operation (used), Year of construction: 1996, This Emmegi Radial Star TU/6 was manufactured in 1996. A used double miter saw, it features a roller conveyor, clamping device, and upgraded PC control. Its design is precise, stable, and robust, ideal for detailed metal sawing tasks. Consider the opportunity to buy this Emmegi Radial Star TU/6. Contact us for more information. • Condition: Used, well-maintained, and ready for use • PC control: Upgraded • Design: Precise, stable, and robust • Note: No dust extraction • Additional equipment • Roller conveyor, right-hand side, 3000 mm • Clamping device (section side) • Spacer profile for roller conveyor (LMS-D 450/500) • Pneumatically swiveling material roll support • Lubrica lubrication unit for LMS-D • Digital miter display for pre-selecting intermediate miters (LMS/LMS-D) • Label printer UBI Easy Coder 101 for LMS-D • Thermal paper roll labels with removable adhesive (for Formula 21/S or UBI Easy label printers) • Software extension for extra-long cutting up to 9000 mm (LMS-D) • Software extension for cutting corner angles Ksdpfx Ahjx D D Aujveww • Software extension for cross-cutting • Drivers for Schüco systems

Condition: good (used), Year of construction: 1984, total width: 1,325 mm, total length: 3,500 mm, total height: 3,400 mm, overall weight: 6,570 kg, Drilling & Tapping in all directions Can be moved in 7 axes Fast preparation, accuracy and performence on heavy and bulky parts. Field using Turbines, Generators, Compressors, Steel Construction, Boilers Containers, Chemoical equipment, furnces of cement work and shipbuilding Kodpfx Ahjyrdpleveww Arm Length: 2070mm Max. drill Ø cast: 65mm Max. tap Ø: 48M Stroke pinole: 350mm Max. distance spindle - table:1550mm Min. distance spindle - table:305mm Speeds / ranges: 900Rpm Spindle Taper: 5ISO/Bt/Mk Quill Ø: 400mm Power: 4kW Max. drill Ø steel: 50mm Length: 3500mm Width: 1325mm Height: 3400mm Weight: 6570kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Csepel radial drill Type: RF50/1600 Kjdpfxjyubmtj Ahvjww Arm lenght: 1600 mm Max drilling capacity: 50 mm Max spindle speed: 2000 1/min Height of the machine: 2830 mm Machine lenght: 2190 mm Machine depth: 950 mm Weight: 3050 kg Under power in our warehouse.

Condition: new, Year of construction: 2024, Power: 1.35kW Speed range: 230 - 3100 rpm Speed steps: 9 Spindle holder: MK-2 Drilling stroke: 85 mm Spindle projection: 140 - 540 mm Table size: Table size: 500 x 740 mm / 250 kg load capacity Ksdjuix Sgjpfx Ahvsww Head inclination: 90° left / 45° right Column diameter: 80 mm Quick-action chuck: 1 - 16 mm Weight: 240 kg

Condition: good (used), Year of construction: 1998, DONAU DANUMERIC 440, year of manufacture 1998 Technical specifications: Kjdpfx Ajyplb Rohvsww - Table 1800 x 600 mm, 4 T-slots - Drilling radius 540 – 1590 mm - Spindle taper SK40 - Speed range 15 – 2800 rpm - Motor power 5.5 kW - Weight approx. 2,800 kg

Condition: used, Year of construction: 1976, arm length 1450 mm taper MK 4 Cube ja Kedpfxsyn R N De Ahvsww weight of the machine ca. 3 t

Condition: excellent (used), Catalogue number: 7866 Kjdpfx Ahox U Tymovjww TECHNICAL DATA - Max. blade diameter: 300mm - Blade bore diameter: 30mm - Blade guard - Cutting height with installed blade: 250mm, 60mm - Max. cutting width: 600mm - Ability to cut at an angle in the vertical plane – arm or blade movement - Arm rotation left/right - Motor: 3kW - Table size: 1130x1010mm - Extraction port diameter: 50mm - Dimensions (LxWxH): 1150x1190x1510mm - Weight: 220kg ADVANTAGES – Italian-made – Not repainted – DTR technical documentation – Very good condition – Used saw Net price: 6,500 PLN Net price: 1,550 EUR (based on an exchange rate of 4.2 PLN/EUR) (Prices may change subject to exchange rate fluctuations)

Condition: used, Year of construction: 1994, functionality: fully functional, throat depth: 1,250 mm, Radial drilling machine Fab. Breda type. R 55-1250 Year of manufacture 1994 Technical details Make: BREDA Type: R 55-1250 Throat: 1250 mm Drilling capacity in steel: 55 mm Drilling capacity in cast iron: 70 mm Tapping capacity in steel: M 50 Tapping capacity in cast iron: M 65 Drill spindle mount: MT 5 Throat: 1250 mm Cross travel of headstock: 930 mm Minimum/largest distance from base plate: 5360 – 1375 mm Vertical travel of the boom: 705 mm Spindle stroke: 310 mm Number of spindle speeds: 12 Spindle speeds: 30 – 1200 rpm Number of feeds: 8 Feeds: 0.06 – 1.0 mm/rev Base plate 2070 x 910 mm Clamping area base plate 1325 x 910 mm Motor power 4.4 kW - 380 volts Dimensions (L x W x H) 2.1 x 1.0 x 2.5 m Kodpov Rpf Sjfx Ahveww Weight 3 t Accessories Drilling table 750 x 600 x 550 mm Cooling Hydraulic clamping All information is subject to change. A demonstration is available at any time in our showroom.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, actuation type: electric, rotational speed (max.): 1,700 rpm, rotational speed (min.): 25 rpm, total width: 1,070 mm, total length: 2,500 mm, total height: 2,840 mm, table width: 630 mm, table length: 800 mm, overall weight: 3,500 kg, Equipment: documentation/manual, The industrial radial drilling machine features a simple and rigid construction, ensuring reliability and stability during operation. It offers a wide range of applications in hole machining, including drilling, reaming, countersinking, boring, and tapping. Technical specifications Maximum drilling capacity: 50 mm Distance from spindle nose to table: 400–1580 mm Distance from spindle axis to column: 370–2000 mm Spindle travel: 400 mm Spindle taper: MT5 Spindle speed range: 25–1700 rpm Number of spindle speeds: 16 Column diameter: 350 mm Main motor power: 4 kW Table dimensions: 800 × 630 × 500 mm Weight: 3500 kg Kwodpfoytf Thox Ahvsw Dimensions: 2500 × 1070 × 2840 mm Sales conditions The machine is brand new 12-month warranty Warranty service Post-warranty service Delivery to the customer is available. The delivery cost is determined individually based on the quotation provided by the transport company. If you are interested in other machines, we encourage you to visit our website.

Condition: new, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, tool diameter: 60 mm, spindle mount: MK 5, rotational speed (max.): 2,000 rpm, rotational speed (min.): 38 rpm, overall weight: 3,800 kg, Equipment: CE marking, The RD 1600 VARIO radial drilling machine is a professional device for drilling holes in metal, wood, and other materials. Thanks to its high power and robust design, it ensures fast and precise drilling even under the most demanding conditions. The powerful 4.0 kW motor is equipped with a frequency inverter and offers a wide speed range of 38–2000 rpm. The arm, spindle head, and column each feature independent hydraulic clamping. The worktable measures 1740 x 980 mm, and the machine is equipped with automatic spindle feed, a coolant system, and motorized arm height adjustment. Maximum drilling capacity is 60 mm; tapping capacity up to M46. Standard features include stepless speed control with readout on a digital display, high spindle alignment with automatic brake, arm, head, and column all fitted with independent hydraulic clamps, a solid base suitable for machining large workpieces, and a massive, ground column ensuring smooth arm movement. The arm's motorized lifting function allows for series production without changing the spindle position. Control panel buttons allow locking/unlocking the head and column either together or individually. The arm guides are hardened and ground, and the machine's perfect balance ensures ideal feed of the spindle. Ideal for drilling, counterboring, reaming, and tapping. Technical specifications Maximum drilling capacity: 60 mm Maximum tapping capacity: M46 Spindle taper: MT5 Minimum spindle speed: 38 rpm Maximum spindle speed: 2000 rpm Spindle speed change—number of ranges/stepless: Stepless (38–275, 275–2000) Drive method: Gearbox Automatic spindle feed range: (8) 0.06–1.00 mm/rev Min. spindle/column distance: 350 mm Max. spindle/column distance: 1600 mm Spindle/table distance: 165–750 mm Min. spindle/base plate distance: 665 mm Max. spindle/base plate distance: 1250 mm Vertical travel of arm with head: 585 mm Horizontal travel of drilling head: 1250 mm Quill stroke: 325 mm Column diameter: n/a Cube table size: 750 x 500 x 500 mm Base plate working area: 1740 x 980 mm Motor power: 4 kW Voltage: 400 V Dimensions (W x D x H): 2600 x 1100 x 2770 mm Weight approx.: 3800 kg Scope of delivery Cube table MK 5 / B 16 drill chuck Reduction sleeves MK 5/4, MK 4/3, MK 3/2 Kodpfx Aheytfxksvsww LED lighting Filled with Shell Tellus 46 oil Coolant system Inverter Digital speed readout Lifting motor Hydraulic motor Guarding Service tools Legally required safety guards Complete operation and maintenance documentation (Polish DTR) CE certificate 24-month full warranty without extra charges

Year of construction: 2026, condition: new, Our machine is a one-head pneumatic oscillating blade cutting table designed for efficient processing of a wide variety of materials. EVA XPE EPP PE LEATHER HONEYCOMB CARDBOARD General Information Machine dimensions: 3310 x 1750 x 1370 mm Maximum panel size: 1300 x 2400 x 100 mm Maximum board size: 1300 x 2400 x 100 mm Total installed power: 11 kW Cutting heads: 1 Ksdpfjytcv Tox Ahveww Maximum cutting speed: 700 mm/sec Maximum cutting thickness: 100 mm Oscillating blade, creasing wheel