Used Fast Ethernet Switch for sale (9,086)

Condition: as good as new (ex-display), Reliable transmission of machine data, process parameters, and diagnostic data to the controller. For connecting up to eight IO-Link devices. Two Ethernet ports with integrated switch. Nedpfx Ahsh N U Sujkjlf Integrated web server for configuration and diagnostics. Simultaneous data exchange with the controller and the IT environment. Technical data: Application area Application: I/O modules for use in the control cabinet. Electrical data Operating voltage [V]: 18...30 DC Nominal voltage DC [V]: 24 Max. power consumption [VA]: 2.4 Total current load [A]: 2 Inputs/Outputs Total number of inputs and outputs: 20 Number of inputs and outputs Number of digital inputs: 18 Number of digital outputs: 10 Inputs Number of digital inputs: 18; (8 x 2 + 2 x 1) Input circuit digital inputs: PNP Voltage supply [V]: 24 Max. total current load inputs [mA]: 1600 Input current limitation [mA]: 200 Short-circuit protection digital inputs: yes Short-circuit resistance digital inputs: yes Overload resistance digital inputs: yes Outputs Number of digital outputs: 10 Circuit: PNP Current load per output [mA]: 200 Short-circuit protection: yes Galvanically isolated: no Actuator supply of the outputs: 24 V DC Interfaces Communication interface: IO-Link Ethernet Transmission rate: 10; 100 Protocol: EtherNet/IP; Modbus TCP IO-Link Master Transmission type: COM1 (4.8 kBaud); COM2 (38.4 kBaud); COM3 (230.4 kBaud) IO-Link revision: 1.1 SDCI standard: IEC 61131-9 Number of Class A ports: 8 Environmental conditions Ambient temperature [°C]: 0...70 Storage temperature [°C]: -20...70 Max. permissible relative humidity [%]: 95 Protection class: IP 20 Approvals / Tests Shock / Vibration test: EN60068-2-6; EN60068-2-27 Mechanical data Weight [g]: 404.5 Dimensions [mm]: 105.3 x 45.2 x 113.6 Materials: Housing: PA Indicators / Controls Display: Switching state: LED, yellow Operation: LED, green Error: LED, red Function: LED, yellow Remarks Packaging unit: 1 piece Electrical connection Screw terminals: ; Pitch: 20 mm

Condition: good (used), Punching machine, punching device, hole punching machine, multi-head punch, multi-head punch, punching system -Quantity: 5x punches -Max. width: 1000 mm -Tool built-in: 8x45 mm Nlodpfx Aheb A I Ibskof -Distance between punches: 187 mm -powered: electric -Weight: 280 kg

Condition: excellent (used), Control cabinet Manufacturer: ETA Type: EMOX type 1,12 Size: 120x40 cm, height: 170 cm Contents – main components: 1 x PLC: Siemens Simatic S7 1500 6 x frequency converters: Siemens Sinamics V20 7 x power supply units: Siemens Sitop PSU100L We have several control cabinets in stock, with different equipment options or also available empty. Nodpfx Aheyu Rx Eokelf

Condition: used, Fasti 417 Beading and Flanging Machine with motorized drive and hydraulic adjustment of the upper roll Condition: Used Technical data Type 125/3 Capacity: 3.0 mm Roller center distance: 125 mm Throat depth: 500 mm Working depth: 430 mm Drive 2 (standard): 1.5/2.5 kW Drive 3: 3.0 kW Hydraulic drive: 0.75 kW Details Without rolls Without back gauge Gear motor with pole-changing capability V06/12 m/min. Nedpfx Ajyxdl Ijhkolf

Condition: new, Main features of the machine: Thicknesser TH 630 is a simple, solid construction intended for everyday work in the workshop, with a planer shaft width of 630 mm. It is characterized by a large massive ribbed cast iron table, which eliminates any vibrations during operation. The machine has an extremely powerful motor that drives the cutter heads (notched knives), which make the process of planing the most difficult wooden elements an easy task. Each knife is easy to replace if worn or damaged. Moving the table up and down is automatic after entering the appropriate dimensions. The sum of these many advantages gives the possibility of very precise machining settings. Advantages: Worktable mounted on 4 bolts Controller for automatic table height adjustment Planer shaft by 120, 4 knives The possibility of cutting large dimensions Technical data: Max planing width: 630 mm Max planing height: 300 mm Min length of the planed element: 280 mm Knife shaft diameter: 120 mm 2 rolls in the table top Nedpfxjgpg E So Ahkslf Number of knives: 4 The dimensions of the knives: 630x30x3 mm Power supply: 400V Total power: 7.5 kW Smooth feed speed: from 4-20 mm / min Electric Lifting Extraction port: 150 mm Weight: 890 kg Table dimensions: 1050x630 mm Milling block speed: 5500 rpm The machine is available immediately! Machine dimensions Length: 1060 mm Width: 1060 mm Height: 1160 mm

Condition: used, Year of construction: 1986, sheet width 2040 mm Nlsdpfsy Ezzyex Ahkef plate thickness 4,0 mm distance between columns 2100 mm roll diameter 150 mm total power requirement 7,0 KW weight of the machine ca. 2,2 t dimensions of the machine ca. 2,95 x 1,0 x 1,75 mm Sheet metal bending machine with 3 rollers - 2 driven rollers - Rear roller electrically adjustable - Conical bending - Foot switch - Emergency stop device

Condition: used, functionality: fully functional, Year of construction: 2001, Equipment: crane, We are offering this used Portain quick-assembly crane GTMR 386B, manufactured in 2001. Outreach 50.0 m, 1,500 kg. Maximum lifting capacity 8,000 kg. Hook height 22.60 m. Complete with ballast, spindles, and plates, including HBC radio remote control. Manufacturer: Portain quick-assembly crane Model: GTMR 386B Nlsdszd Nx Iepfx Ahkof Year of manufacture: 2001 If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 1993, plate thickness max. 3 mm distance betw. rolls 125 mm throat max. 500 mm weight ca. 500 kg Material thickness at 40 kg/mm² tensile strength: max. 3 mm Working width: 500 mm Working depth: 450 mm Manual adjustment of the upper roller Roller center distance: 125 mm Nlodpfsy Iha Uex Ahksf Continuously variable working speed: 3–15 m/min Stop skirt incl. 1 pair of rolls Forward/reverse operation via foot switch

Year of construction: 2000, condition: ready for operation (used), overall weight: 2,110 kg, sheet thickness (max.): 5 mm, working length: 2,040 mm, Plate rolling machine manufactured in 2000. This FASTI 136-20-4.5 features a capacity of 2040 x 4.5 mm at 400 N/mm² tensile strength and weighs 2110 kg. It is equipped with a Fasti-Matik 5 R control unit and operates at 400 V. If you are looking to get high-quality plate rolling capabilities, consider the FASTI 136-20-4.5 machine we have for sale. Contact us for further details. Nsdpszi S U Aefx Ahkelf - Capacity: 2040 x 4.5 mm (at 400 N/mm² Tensile Strength)- Weight: 2110 kg- Control Unit Model: Fasti-Matik 5 R (FM 5 / FM 5 R)- Operating Voltage: 400 V (3/N/PE~)- Frequency: 50 Hz- Control Voltage: 230 V AC / 24 V DC / 24 V AC- Connected Load: 6.356 kW- Nominal Current: 15.7 A- Circuit Diagram No.: 10X0001 B- Included Equipment: Control unit operating manual, machine instruction handbook- Working Hours: estimated as very low- Saving programs to the 3.5-inch floppy drive does not work (no access). It may be possible to replace it, though or the values must be entered manually.

Year of construction: 2021, condition: used, functionality: fully functional, Impact nut driver for large flanges, suitable for M6 or M8 nuts. Nlsdpfx Aozbu R Ejhkjf Capable of processing up to 2,500 nuts per hour.

Condition: like new (used), Year of construction: 2023, operating hours: 1 h, actuation type: manual, working width: 2,030 mm, back gauge: 750 mm, Equipment: documentation/manual, type plate available, Panel shear, like new, unused. The machine was delivered by Schröder in January 2023 and put into operation. Since it was unsuitable for the intended application (see photos), it was subsequently stored and is in absolutely new condition. The new price was €12,381 (excluding transport + assembly). Manufacturer: SCHRÖDER Type: HS 2000 x 1.25 Year of manufacture: 2023 Usable length: 2,030 mm Cutting capacity at 400 N/mm2: 1.25 mm Equipment: - Rear stop 750 mm, digital display, adjustable at the front - Hold-down device 750 mm Nledpozl A Rasfx Ahkjf - Stainless steel blade - Clamping beam with hard rubber strip - Front support table, extendable - Angle stop right + left - Sliding carriage

Condition: used, Swing bending machine with additional segmented upper tool, gooseneck rail. Swing bending press brake FASTI type 2095-25-2.5, serial no. 94 295 004, year of manufacture 1994. Working length 2540 mm, max. sheet thickness 2.5 mm, upper beam stroke 380 mm, bending beam motor power 2.2 kW, power supply 400 Volt, 50 Hz. - NC control FASTImatic FM100 - one-piece sharp rail 135° - additional segmented upper tool, gooseneck rail - controlled backgauge - continuous stop rail - controlled bending angle via control - electric foot switches. Weight 3000 kg. In good condition. Nlodpfx Ahottc Uaokef

Condition: used, Year of construction: 1997, sheet width 2540 mm plate thickness 3 mm distance between columns 2600 mm min. cut-off length 5 x s mm adjustment of lower beam 80 mm Nlsdpfxox Harmo Ahkef adjustment of upper beam 80 mm daylight opening 350 mm total power requirement 4 kW dimensions 4 x 1 x 1,5 m With accessories and PLC control made by Alba.

Condition: used, Year of construction: 1993, Max. cutting length: 4000 mm Max. sheet thickness: 4 mm steel Controlled rear stop up to 1,000 mm side stop and table extensions cut length limit cut edge illumination safety fence, roller with safety switches Weight: approx. 8500 kg Nedpef Nwvfofx Ahkelf

Condition: used, Max. Blechstärke: 1.25 mm steel Njdjhlnv Hspfx Ahkolf Roller center distance: 63 mm

Condition: used, Max. cutting length: 3,000 mm Max. sheet thickness: 6 mm steel Nlodpfxovmz Nbo Ahkjf Motorized backgauge with digital display up to 1000 mm Side stops and table extensions cutting length limitation Cutting edge lighting Hydraulic shear angle adjustment knife sharpened Weight: approx. 6500 kg

Condition: good (used), Year of construction: 2007, functionality: fully functional, A state-of-the-art, manufacturer-independent Fastems MLS-MD (Multi-Level System) pallet system with 1,064 storage locations is for sale. For sale is a high-capacity, extremely flexible automation solution from the world market leader, Fastems. The system underwent a comprehensive modernization between 2023 and 2024 (total volume of the Fastems project exceeding €900,000). During this process, the entire system was upgraded to the latest MMS 8 control software, and the hardware (including a new copper busbar and main impellers) was completely mechanically renewed. The system is manufacturer-independent and can be adapted to machine tools from almost all major manufacturers (e.g., DMG MORI, GROB, Mazak, Matsuura, Heller, etc.). The sale is for the automation system / pallet system only (WITHOUT the connected Heller machining centers). To make the purchase and integration into your production as risk-free and convenient as possible, we offer the following additional services upon request: • Turnkey complete package: We offer professional dismantling, insured transport, and complete reassembly, mechanical/electrical installation, and commissioning in your production hall. You will receive a fully functional system from a single source. • Attractive financing options: With appropriate creditworthiness and a positive assessment, we offer flexible financing or leasing models for the system. Preserve your liquidity and finance the automation directly from your current earnings. (Germany only) Technical data & system configuration: • System type: Fastems MLS-MD (Multi-Level System - Medium Duty) • System number: 2528 Njdpfx Aezvbl Rshkjlf • Year of construction: 2007 / Complete general retrofit & control system upgrade (MMS 8) in 2023/2024! • Control / Software: Fastems MMS 8 (Latest version, modernized in 2023/2024) • Total storage capacity: 1,064 storage locations for Euro pallets and grid boxes • Pallet and load specifications: o Machine pallets (MC): For pallet size 630 x 630 mm (Max. load weight: 1,500 kg including pallet) o Material pallets (EUR): For pallet size 800 x 1,200 mm (Max. load weight: 1,200 kg) o Grid boxes (GB): For pallet size 835 x 1,240 mm (Max. load weight: 1,200 kg)

Condition: used, Max. bending length: 2040 mm Max. sheet thickness: 6 mm steel Upper beam stroke: 350 mm Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Mechanical adjustment of the bending arm with digital display (setting of sheet thickness) Manual rear stop with spring fingers up to 1500 mm Nledpfxjy T H N So Ahkef 5700 kg

Condition: like new (used), Coil: 24.0V AC / 5.5VA 50-60Hz Area of application: Safety circuit Width: 90 mm Height: 87 mm Depth: 120 mm Weight: 504 g Condition: Like new Nledpfx Ajytpi Hshkjf

Condition: like new (used), Coil: 24.0 VDC / 4.5W Application: Safety circuit Width: 45 mm Height: 87 mm Depth: 120 mm Nlodpeytr Avefx Ahksf Weight: 364 g

Condition: like new (used), AC15 3A 400V AC. 250V AC 6A Application: Machinery / Equipment Manufacturing Nljdpfx Ajzfh Rxehksf Width: 40 mm Depth: 45 mm Length: 160 mm Weight: 348 g Condition: Like new

Condition: excellent (used), Year of construction: 2017, Separator, dust separator, welding fume filter, filter system, cartridge dust extraction system, cartridge filter unit, cartridge filter -Condition: unused, without extraction fan -Manufacturer: INFASTAUB, filter system cartridge filter with pneumatic filter cleaning -Type: AJV 800-980-22 P -Cyclone separator: made of stainless steel -Inlet opening: Ø 110 mm -Outlet opening: pneumatic shut-off valve Ø 300 mm -Dimensions: 1730/1730/H5500 mm -Quantity: 2 pieces available Price: per piece -Transport dimensions: 4 loading meters, height 1730 mm -Weight: 1120 kg Nledpfx Ahsytgrxjksf

Condition: good (used), Year of construction: 2013, Excellent horizontal machining center with Fastems automation system for 10 pallets. Built in 2012, first used in 2013. Including: Automatic pallet changer Internal cooling Renishaw tool sensor Chip evacuation Through-spindle cooling (IKZ) Machine can be seen in operation upon appointment. Immediately available for delivery. More info and videos available on request. Control Fanuc 31i X-axis 850 mm Y-axis 700 mm Z-axis 750 mm B-axis (rotation) 360° Table 500x500 mm Spindle Maximum 14,000 rpm Spindle taper SK40 Number of tools 2 x 60 positions Spindle hours ca 12000h Machine weight approx. 16 tons Floor space required approx. 9000 × 9000 × 2850 mm (including FMS) Nedsypb Srjpfx Ahkslf Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Year of construction: 2021, condition: excellent (used), Insert nut (insert sleeve) machine, Stafast HFM-CF. The machine is configured for M8 nuts with a large flange. The machine is in very good condition. Ready for use. Njdsy Ui Tispfx Ahkolf

Condition: used, “Functionally tested; item comes from the dismantling of equipment from an automotive supplier.” 6 units available Manufacturer: Zebra Technologies Model: ZT230 Printing process: Thermal transfer / Direct thermal Resolution: 203 dpi Print width: up to 104 mm Print speed: up to 152 mm/s Interfaces: USB, RS232, Ethernet (optional) Nedpfjzhnxujx Ahkelf Material compatibility: Labels, continuous material Special features: Robust metal housing, LCD display