Used Fanuc Robot for sale (614)

Condition: good (used), Fanuc R-J3iB control cabinet for R2000 robot Scope of delivery: only control cabinet as shown in pictures. No warranty as spare parts carrier. Used goods - normal signs of use present, but still fully functional. Further details and pictures on request. Ljdpeu Dx N Rsfx Ab Ujah The amount stated is net. The statutory VAT of 19% will be added at checkout. You will receive a proper invoice with VAT shown.

Year of construction: 2014, condition: refurbished (used), machine/vehicle number: 714_0917, Robot palletizing system KEG barrels loading and depalletizing. Capacity of up to 120 / h loading and depalletizing. We have been operating these systems successfully for several years. Our KEG gripper can grap KEGs from 300-450mm (adjustable). The system is equipped with a protective housing and access control through a light curtain. PLC Controlled via Siemens S7 TIA Portal. Lasdpeg N S Edjfx Ab Ueh Required space approx. 4500x3500mm. Optionally also a flow keg weigher, pallet labeler, automatic capsule application available from us. We would be happy to integrate your existing components into our system. We have the full KNOW HOW! Have references for several years. We also provide support after the purchase. Can be implemented at short notice, assembly, integration and commissioning from a single source.

Condition: good (used), Year of construction: 2006, functionality: fully functional, Robot Fanuc S-500iB , R-J3iB with 7th axis/motor year 8/2006 Control system: R-J3iB Number of axes: 6 Max. Load capacity: 15 kg Max. Working range: approx. 2757 mm Lasdpfx Aorn Rx Hsb Uoh Profibus Scope of delivery : Robot,Control unit,Cable,Teach panel,Operating instructions,Circuit diagrams 2 weeks commissioning guarantee. No further warranty. Spare parts are always available from stock. Robot is fully functional and can be inspected. The sales price quoted does not include the statutory VAT of 19%.

Condition: good (used), Year of construction: 2003, functionality: fully functional, Robot Fanuc LR Mate 200iB R-J3iB Control unit R-J3iB Number of axes: 6 Max. Payload: 7 kg Max. Working range: approx. 717mm radius Year of construction: 2003 Scope of delivery : Robot,Control unit,Cable,Teach panel,Operating instructions,Circuit diagrams Lsdpfx Aern Ru Asb Uoah 2 weeks commissioning guarantee, no further warranty Spare parts are always available from stock. Robot is fully functional and can be inspected with pleasure Free loading/ex works The sales price quoted does not include the statutory VAT of 19%.

Year of construction: 2007, condition: used, Robot Fanuc LR Mate 200iC/5L R30iA Ljdpfx Aoh Tx Tcjb Usah Control: R30iA Year:11/07 Number of axles: 6 Max. Load capacity: 5Kg Max. Working range: ca.892 mm Scope of delivery : Robot,Control,Cable,Teach-Panel

Condition: ready for operation (used), GMF Robotics Fanuc A05B-2051-C102 CRT/KB Unit Operator Panel , used, normal signs of wear, 100% functional Lasdpoi D U Tnefx Ab Ujh

Condition: ready for operation (used), Fanuc R-2000iB/165F industriële handlingrobot met R-30la-controller - X-reis van de robot: 15 meter - 20 meter werkbereik als je de zwaai aan de linker- en rechterkant meetelt - 6 assen - bereik: 2655 mm - max 125 kg laadvermogen Ledpfx Aexqh Rvsb Ueah Robot gemonteerd op Winkel robotgeleiding RLE-2000

Condition: excellent (used), Year of construction: 2007, Fanuc R2000iB/210F DEVELOPMENT OF GSG ROBOTICS Lajdpfxew R Nf As Ab Ueh GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: used, Year of construction: 1999, - Year: 1999 - Documentation available: No - Serial number: R99X75197 - Load capacity [kg]: 6 - Model: k & Place - Number of axes: 6 - Reach [mm]: 1368mm - Controller type: RJ3 - Control type: Fanuc Laodpfx Aswh Spysb Ush Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2004, For sale are 3 identical LR Mate 200iB 3L robots Lodpfx Asw R Ta Dsb Uoah Control unit R-J3iB Number of axes: 6 Max. Payload: 3 kg Reach: approx. 700 mm Scope of delivery : Robot,control unit,cable,touch panel,operating instructions

Condition: used, 6-axis AC servo drive, servo controller, servo inverter, servo amplifier, servo regulator, frequency converter, drive controller for robots FANUC type A06B-6105-H003 No. V07Z08282 NEW / unused Input voltage: 200 - 240 VAC Rated power: 1.5 kW Number of axis outputs: 6 Output current: 6 x 13 A Total output current: max. 78 A Manual No.: B-81465 Standard: EN50178 Ljdpokpwu Rjfx Ab Uoah Installed PCBs: A16B-2000-0063/07D, A16B-3200-0440/05C - Plexiglass cover not included in delivery Dimensions (W x H x D): 70 x 170 x 380 mm Weight: 16.5 kg As new / unused in opened original box from stock liquidation

Condition: like new (used), Year of construction: 2006, operating hours: 39,475 h, functionality: fully functional, machine/vehicle number: 80022, overall weight: 520 kg, load capacity: 15 kg, arm reach: 2,800 mm, pivoting range: 320 °, controller manufacturer: FANUC, controller model: RJ3iC, teach pendant manufacturer: FANUC, control cabinet width: 800 mm, control cabinet height: 1,360 mm, input voltage: 400 V, input current: 20 A, type of input current: AC, repeat accuracy: 2 mm, This is a painting robot from Fanuc. It was once used at BMW to clear coat luxury car bodies and, with its 40000 hours, has a certain working life behind it. The robots at BMW worked on a rail. For this reason, a large additional amplifier is installed in the control system. The second additional amplifier is used to control motors in the shoulder for gear pumps. However, these motors are not installed. The rail motor would then be connected directly to the robot. The cable length between the robot and the controller is 10 m and can be plugged into the controller. This is also special. We can help with transportation and installation. It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation. At the moment it is configured as left-armed and left-handed. It has line tracking. Laodpfxjtu H Hcj Ab Ujh However, this can easily be changed without mechanical conversion. The device is still with our customer, but can be inspected under voltage at Paintrobotics if you are seriously interested. We have two of them. We would also bring the device to us from Frankfurt.

Condition: new, Year of construction: 2012, operating hours: 10 h, Fanuc R2000iB/165F Laodjw R Nczepfx Ab Ush DEVELOPMENT OF GSG ROBOTICS Founded in 2005 in Gütersloh, GSG Robotics GmbH has been located in Marl since 2015 with an extensive service area for robot maintenance and repair. Over the years, we have developed into a comprehensive partner for all matters concerning industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: like new (used), Year of construction: 2007, operating hours: 92 h, functionality: fully functional, machine/vehicle number: 82351, overall weight: 520 kg, load capacity: 15 kg, arm reach: 2,800 mm, pivoting range: 320 °, controller manufacturer: FANUC, controller model: RJ3iC, teach pendant manufacturer: FANUC, control cabinet width: 800 mm, control cabinet height: 1,360 mm, input voltage: 400 V, input current: 20 A, type of input current: AC, repeat accuracy: 2 mm, This is a painting robot from Fanuc. It has very special equipment. It was once intended as a replacement robot at BMW for clear-coating luxury cars. It was never used and is therefore as good as new. The robots at BMW worked on a rail. For this reason, a large additional amplifier is installed in the control unit. The corresponding motor is also included. It is practically connected to the robot itself. This means it can be mounted directly on the carriage. Another special feature of this robot is that a motor is built into the shoulder to control a gear pump. This means that dosing on the robot is no problem. The cable length between the robot and controller is 2x10m and can be plugged into the controller. This means 10 m of cable through e.g. a chain from a rail and then another 10 m pluggable to the controller. This is also special. We give a 1-year commissioning guarantee. Laodpfx Abetu H Avs Uoh We can help with transportation and installation. It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation. At the moment it is configured as right-armed and right-handed. However, this can easily be changed without mechanical conversion. The device is still with our customer, but can be inspected under voltage at Paintrobotics if there is serious interest. We would bring the device to us from Frankfurt.

Condition: like new (used), Year of construction: 2011, operating hours: 2,509 h, functionality: fully functional, machine/vehicle number: 111313, overall weight: 520 kg, load capacity: 15 kg, arm reach: 2,800 mm, pivoting range: 320 °, controller manufacturer: FANUC, controller model: R-30iA, teach pendant manufacturer: FANUC, control cabinet width: 800 mm, control cabinet height: 1,360 mm, input voltage: 400 V, input current: 20 A, type of input current: AC, repeat accuracy: 2 mm, This is a painting robot from Fanuc. It has very special equipment. It was once intended for painting blades for wind turbines. For this purpose, it was installed on a 60 m long rail, which had another rail with which the robot could travel up and down. For this reason, two large additional amplifiers are installed in the control system. This is why the encoder break module is also present twice. Another special feature of this robot is that motors are installed in the shoulder to control two gear pumps. So a 2-component mixture on the robot is no problem. The robot was never actually used. The operating hours only occurred because the robot was live. This was also confirmed to me by the operator of the system (Enercon). The actual servo ON time is 0.2 hours. The robot has slight soiling, but is practically as good as new. Unfortunately, the teach pendant and the teach cable are very dirty. However, this could be replaced if necessary. The cable length between the robot and controller is 5m and can be plugged into the controller. This is also special. We give a 1-year commissioning guarantee. We can help with transportation and installation. It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation. We have two of them. The price is for one robot. At the moment it is configured as right-armed and right-handed. However, this can easily be changed without mechanical conversion. The device can be inspected under voltage at Paintrobotics. Lasdpfx Ajtu Hpqeb Ush

Condition: good (used), Year of construction: 2003, The robot originates from the dismantling of a welding system. We have inspected it and operated it manually. It is in very good condition. Laodpfx Aowbak Ssb Ueh The batteries have just been replaced. The Arctool is installed, but this does not prevent the robot from also performing handling tasks. The machine can be inspected live at our premises. The price is so low because we need space. If you need technical support, we are happy to help.

Condition: excellent (used), functionality: fully functional, overall weight: 3 kg, Fanuc Controller Servo Card A06B-6124-H202 iSV 2-10/10HV Amplifier Servo amplifier Lodpfswngrvjx Ab Ujah Manufacturer: Fanuc Type: A06B-6124-H202 Alpha iSV 2-10/10HV Weight: 3kg If you have any further questions, we are happy to help. Price, ex stock here plus VAT. Condition: good - ready for demonstration Delivery: ex stock - as inspected Payment: strictly net - upon receipt of invoice Subject to prior sale and errors. We kindly request your order. More machines and equipment available from stock – Please inquire. We look forward to hearing from you.

Condition: used, Year of construction: 2003, A one owner and well maintained 2003 built Fanuc RoboDrill T21iD with Fanuc 16iMB control, BT30 10,000RPM Spindle, 21 Tool ATC, Nikken 4th Axis Head, Zero Point sub plate, machine vice & coolant equipment. Very clean machine! Specification: Lsdsxqdvuepfx Ab Ueah X Axis Travel 500 mm Y Axis Travel 400mm Z Axis Travel 350mm Table Size 650 x 400mm Table Load 250 Kgs Spindle Taper BT-30 Max. Speed 10,000RPM Motor Power 7.5 KW ATC Tool Capacity 21 stations CNC Control Fanuc 16i-MB Rapid Traverse 54 m/min Machine Weight Approximately 2,000 kg Control: Fanuc 16i MB Spec: Travels 500mm x 400mm x 330mm 10,000 RPM Accessories: Nikken 4th Axis Head, Zero Point sub plate, machine vice

Condition: new, Year of construction: 2023, Fanuc ROBOSHOT α-S30iB (2023) Model: FANUC ROBOSHOT α-S30iB Clamping Force: 300 kN Max. / Min. Mold Height: 330 mm / 150 mm Tie Bar Distance (HxV): 310 x 290 mm Ledpfx Abexqaidj Ujah Platen Diameter: Ø 100 mm Injection Speed: 600 mm/s Screw Diameter: Φ16 mm Screw Volume: 11 ccm Resin Compatibility: Glass fiber content up to 30% Machine Type: Fully Electric Injection Molding Machine

Condition: ready for operation (used), Year of construction: 2014, Main Drive Lsdpfx Abexpyymo Ueah Spindle speed range 21000 Number of axis 4 Movement X-Axis Movement 500 mm Y-Axis Movement 400 mm Z-Axis Movement 330 mm This Fanuc Robodrill D21MiA5 Vertical Machining center was manufactured in the year 2014. It has 4 axis. The machine has a spindle speed of 21000 rpm. Open the attached PDF document to see all additional options of machine configuration (scroll down to access the document). Application Types Milling

Condition: new, Fanuc A02B-0259-C241 # A HANDY MAC OPE PANE SN:P002780 ,unused, 100% functional, scope of delivery according to photos Ledpfei D Uvmex Ab Uoah

Condition: ready for operation (used), Year of construction: 2016, Control Unit Brand FANUC Model 31i model B5 Lajdpexpyxvofx Ab Ujh Main Drive Number of axis 4 Movement X-Axis Movement 700 mm Y-Axis Movement 400 mm Z-Axis Movement 330 mm Workpiece Workpiece weight 300 kg Table Outer length 850 mm Outer width 410 mm Tools Slots in storage 21 Additional Equipment Chip conveyor: A carpet This 4-axis FANUC Robodrill Alpha-D21LiB5 was manufactured in 2016. A vertical machining center featuring a 4th axis continuous table, spindle speeds up to 10,000 rpm, and a high-pressure system through the spindle at 15 bar. With less than 2000 working hours, it includes a tool magazine with a capacity of 21 and a chip conveyor. If you are looking to get high-quality milling capabilities, consider the FANUC Robodrill Alpha-D21LiB5 machine we have for sale. Contact us for more information. Application Types Milling

Condition: new, Fanuc A06B-6124-H102 Servo Amplifier Module SN:V02260242, unused in opened original packaging, 100% functional, scope of delivery as per photos Laedoi D Uzcepfx Ab Ueh

Condition: new, Fanuc A20B-8100C - A20B-8100 /C PCB-PMC C Languarde Board, serial number as per photo, unused in original packaging, 100% functional, scope of delivery as per photos Laedpfx Aboi D U Hpo Ueh

Condition: ready for operation (used), Fanuc A06B-0063-B003 AC Servo Motor SN:C129F1DCF , professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos,For this item are not the agreed Laodpji D Hv Rsfx Ab Ueh