Used Fanuc Alpha for sale (618)

Condition: ready for operation (used), Year of construction: 2016, operating hours: 24,285 h, General Data Machine weight 4400 kg Control Unit Brand FANUC Hsdpfjxllk Aox Ab Dsw Injection Unit Screw diameter 36 mm Clamping Unit Clamping force 150-180 This FANUC Roboshot S150iA was manufactured in 2016. It is an electrical injection moulding machine featuring a screw diameter of 36mm and a closing force between 150-180 tons. It operates on a power supply of 200 V∼50/60 Hz or 220 V∼60 Hz. Consider the opportunity to buy this FANUC Roboshot S150iA electrical injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: refurbished (used), Year of construction: 2011, machine/vehicle number: R-00503, load capacity: 10 kg, arm reach: 1,420 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC M-10iA manufactured in 2011.08. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-10iA Model Number: A05B-1221-B402 Year of Manufacture Robot: 2011.08 Warranty term (months): 12   Payload (kg): 10 Reach (mm): 1420 Repeatability (mm): ± 0.08 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 130 Hsdpfx Absxlk Umo Dow   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2011.08 RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10

Condition: used, Year of construction: 2001, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: P0131I146, workpiece weight (max.): 1,000 kg, travel distance X-axis: 520 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 310 mm, overall weight: 2,600 kg, Wire EDM machine in excellent condition with few operating hours, purchased used and refurbished directly by the official FANUC dealer. The machine is equipped with a chiller to maintain the working water temperature and comes with all the necessary equipment for machine setup. Hedpfew N Tbrsx Ab Djw

Condition: good (used), Year of construction: 2011, machine/vehicle number: A05B-2551-B280, Fanuc LR mate in very good condition. It was removed from an injection moulding process where it loaded the the plastic blanks prior to forming and was only in production for 5 yrs. it comes with the robust R30iA controller which has ethernet connectivity to connect to your PLC or can be configured to work as a stand alone unit Hsdpfx Abstiy Sge Djw

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: E183001165, overall weight: 250 kg, Robot in very good condition, integrated into a Fanuc Robodrill machining center with an automated door (sold separately). Hedpfxjxnh Ezj Ab Dow

Condition: used, Year of construction: 2014, Control Unit: R-30 iB This robot operates as a loading and unloading robot in a cell equipped with the Paul Koester leak test (Lot 2770019). Axes: 6 Maximum Payload: 70 kg Reach: 2050 mm Repeatability: ±0.04 mm to ±0.07 mm Motion Range: J1: ±360° J2: ±225° J3: ±440° J4: ±720° J5: ±250° J6: ±720° Maximum Axis Speeds: J1: 160 °/s J2: 120 °/s J3: 120 °/s J4: 225 °/s J5: 225 °/s J6: 225 °/s Mechanical Weight: approx. 560 kg The machine/asset does not include any product-related tool/fixture or gripper (robot). Hsdoxgp T Djpfx Ab Dew

Condition: ready for operation (used), Year of construction: 2019, operating hours: 9,941 h, Control Unit Brand FANUC Injection Unit Screw diameter 36mm Clamping Unit Clamping force 220 Hsdpfxexllnus Ab Dew Control Unit Brand FANUC Injection Unit Screw diameter 36mm Clamping Unit Clamping force 220 This FANUC Roboshot S220iA was manufactured in 2019. It features a clamping force of 220 tons, tiebar spacing of 650x650 mm, and a screw diameter of 36 mm. It includes a selecting unit and a single platen design. If you are looking to get high quality injection molding capabilities consider the FANUC Roboshot S220iA machine we have for sale. Contact us for more information. Application Types Injection Moulding

Condition: refurbished (used), Year of construction: 2011, machine/vehicle number: R-00501, load capacity: 185 kg, arm reach: 3,060 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC R-2000iB/185L manufactured in 2011.12. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: R-2000iB/185L Model Number: A05B-1329-B211 Year of Manufacture Robot: 2011.12 Warranty term (months): 12   Payload (kg): 185 Reach (mm): 3060 Repeatability (mm): ± 0.3 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1290   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2011.12 Hsdpoxlk Uaefx Ab Dsw RCC Length (m): 14   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 12  

Condition: ready for operation (used), Fanuc A06B-0243-B400 AC servo motor SN:C064G7066 with A860-2000-T301 pulse encoder, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this article. Please ask for price separately! Hjdeltryyjpfx Ab Dow

Condition: good (used), Year of construction: 2012, functionality: fully functional, load capacity: 165 kg, controller model: 30iA, teach pendant manufacturer: Fanuc, input voltage: 400 V, type of input current: three-phase, Used but good condition. Repeatability test done, greased, mechanical and RAM batteries changed. We have cleaned it up but it did come from a spotweld environment so has obvious signs of use. Hodeuqa Tiepfx Ab Dow

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: E15631937, overall weight: 220 kg, Robot in very good condition, connected to a machine tool for loading/unloading, currently not in operation. Hodpsxnh Amjfx Ab Djw

Condition: ready for operation (used), Year of construction: 2014, operating hours: 51,435 h, General Data Machine weight 18000 kg Control Unit Brand FANUC Hjdpfx Aexlll Tob Djw Injection Unit Screw diameter 40 mm Clamping Unit Clamping force 150-180t This FANUC Roboshot S150iA was manufactured in 2014. It features a closing force of 150-180 tons and a screw diameter of 40mm. Ideal for precision electrical injection molding, it operates on a power supply of 200 V~50/60 Hz or 220 V~60 Hz. Contact us for more information about this machine. Application Types Injection Moulding

Condition: refurbished (used), Year of construction: 2008, machine/vehicle number: R-00510, load capacity: 50 kg, arm reach: 2,050 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C302#EGN, Refurbished FANUC M-710iC/50 manufactured in 2008.10. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/50 Model Number: A05B-1125-B201 Year of Manufacture Robot: 2008.10 Warranty term (months): 12   Payload (kg): 50 Reach (mm): 2050 Repeatability (mm): ± 0.03 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 560   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2008.09 RCC Length (m): 7   Teach Pendant: A05B-2518-C302#EGN Teach Pendant Cable Length (m): 12 Hodpfx Aoxlcurjb Djw

Condition: ready for operation (used), Fanuc A06B-6058-H334 Servo Amplifier , serial no. as per photo ,used, professionally completely overhauled and tested with 12 months warranty, 100% functional Hsdpei D Uwyjfx Ab Dsw

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, controller manufacturer: fanuc, controller model: RJ3iC, Fully working enclosed mig welding cell with a Fanuc RJ3iC controller and an AM120iB robot arm. it has a brand new torch cleaner and a kempii syn 500 welder with a DT400 wire feed unit. A new 22deg torch and harness. it has a Binzel CAT2 mount and the hand broken system works as it should. if this is not exactly what you are looking for, contact us as we provide a package of comprehensive welding solutions and training Hodpfx Ajxnppbob Dew

Condition: excellent (used), Year of construction: 2014, operating hours: 21,800 h, functionality: fully functional, machine/vehicle number: P147YH288, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, nominal power (apparent): 11 kVA, overall weight: 2,200 kg, spindle speed (min.): 24,000 rpm, coolant supply: 40 bar, number of slots in tool magazine: 21, Equipment: chip conveyor, documentation/manual, Equipment: - FANUC DDR-T 4th axis digital rotary table with tailstock - high-pressure through-spindle coolant, 24,000 rpm - 200L chip conveyor with high-pressure pump - automated side door for robotic loading - machine under annual FANUC maintenance contract - optional extra: integrated Fanuc M20iA12L robot already mounted on the machine Hedexnhvyjpfx Ab Djw

Condition: ready for operation (used), Year of construction: 2018, Control Unit Brand FANUC Injection Unit Screw diameter 52 mm Hsdsxllnhopfx Ab Djw Clamping Unit Clamping force 350 This FANUC Roboshot S300iA was manufactured in 2018. It features a clamping force of 350 tons, tiebar spacing of 810 x 710 mm, and a screw diameter of 52 mm. Ideal for precision electrical injection molding. Contact us for more information. Application Types Injection Moulding

Condition: refurbished (used), Year of construction: 2012, machine/vehicle number: R-00494, load capacity: 20 kg, arm reach: 1,811 mm, controller manufacturer: R-30iA Mate, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC M-20iA manufactured in 2012.06. The robot comes with an R-30iA Mate controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-20iA Model Number: A05B-1222-B202 Year of Manufacture Robot: 2012.06 Warranty term (months): 12   Payload (kg): 20 Reach (mm): 1811 Repeatability (mm): ± 0.08 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 250   Controller: R-30iA Mate Year of Manufacture Cabinet: 2012.06 RCC Length (m): 7 Hsdpoxgcplsfx Ab Dew   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10  

Condition: excellent (used), Year of construction: 2017, operating hours: 15,200 h, functionality: fully functional, machine/vehicle number: P172ZH357, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, nominal power (apparent): 11 kVA, overall weight: 2,200 kg, spindle speed (min.): 24,000 rpm, coolant supply: 40 bar, number of slots in tool magazine: 21, Equipment: chip conveyor, documentation/manual, Equipment: - FANUC DDR-T 4th axis digital rotary table with tailstock - high-pressure through-spindle coolant, 24,000 rpm - 200L chip conveyor with high-pressure pump - automated side door for robotic loading - machine under annual FANUC maintenance contract - optional extra: integrated Fanuc M20iA12L robot already mounted on the machine Hodpfx Abexnhtlo Dew

Condition: ready for operation (used), Year of construction: 2016, operating hours: 33,501 h, General Data Hedpfx Absxllkps Dsw Machine weight 4400 kg Control Unit Brand FANUC Injection Unit Screw diameter 16/20 mm Clamping Unit Clamping force 50 t This FANUC Roboshot S100iA was manufactured in 2016. It's an electrical injection moulding machine with a closing force of 50 tons and a screw diameter of 16/20mm. It operates on a power supply of 200 V∼50/60 Hz or 220 V∼60 Hz. Consider the opportunity to buy this FANUC Roboshot S100iA electrical injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2016, operating hours: 42,581 h, Control Unit Brand FANUC Injection Unit Screw diameter 20 mm Clamping Unit Clamping force 50t Hedpfx Abjxllk No Dsw This FANUC Roboshot S50iA was manufactured in 2016. It is an electrical injection moulding machine with a closing force of 50 tons and a screw diameter of 20mm. Consider the opportunity to buy this FANUC Roboshot S50iA electrical injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2015, operating hours: 47,176 h, General Data Machine weight 4400 kg Control Unit Brand FANUC Injection Unit Screw diameter 26 mm Hsdoxizfwspfx Ab Dew Clamping Unit Clamping force 100 t This FANUC Roboshot S100iA was manufactured in 2015. It's an electrical injection moulding machine with a closing force of 100t and a screw diameter of 26mm. Weighing 4.4 tons, it operates on a power supply of 200 V∼50/60 Hz or 220 V∼60 Hz. Consider the opportunity to buy this FANUC Roboshot S100iA electrical injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2021, operating hours: 9,549 h, Control Unit Brand FANUC Injection Unit Screw diameter 32 mm Clamping Unit Clamping force 130 This FANUC Roboshot S130iA was manufactured in 2021. It features a clamping force of 130 tons and a tiebar spacing of 530 x 530 mm. The machine includes a single platen and a screw diameter of 32 mm, ideal for precision in electrical injection molding. Contact us for more information. Hsdpjxizgbsfx Ab Dow Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2021, operating hours: 4,421 h, Control Unit Brand FANUC Clamping Unit Clamping force 100t This FANUC ROBOSHOT S100iA was manufactured in 2021. It's an electrical injection moulding machine featuring screw diameters of 26 mm, 32 mm, and 36 mm. Operating hours range from 4,421 to 18,606. Consider the opportunity to buy this FANUC ROBOSHOT S100iA electrical injection moulding machine. Contact us for more information. Hodpfjxird Dex Ab Dow Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2021, operating hours: 14,890 h, Injection Unit Screw diameter 36 mm Clamping Unit Hsdpfxsxirfns Ab Dsw Clamping force 150t This FANUC ROBOSHOT S150iA was manufactured in 2021. It features a screw diameter of 36 mm, ideal for precision in electrical injection moulding processes. Consider the opportunity to buy this FANUC ROBOSHOT S150iA electrical injection moulding machine. Contact us for more information. Application Types Injection Moulding