Used Face Plates for sale (13,450)

Condition: new, functionality: fully functional, Year of construction: 2026, Electronically controlled, hydraulic four-roller bending machine Make FACCIN, model 4 HEL/S 2122 Technical specifications: Number of Reels: Four Geometry of the side rollers: linear guides Working width: 2000 mm Top roller diameter: 225 mm Lower roller diameter: 215 mm Side roller diameter: 165 mm Pressure force against the top roller: 100 tons Guaranteed installed power: 9.2 kW (12.5 hp) Guaranteed maximum turning speed: 4-8 m/min Guaranteed machine weight: 4,450 kg Length: 3,500mm Width: 1,200mm Height: 1,100mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 11 mm Bending capacity (full working width) 8 mm from a pipe diameter of 1,100 mm Rolling capacity (full working width) 8 mm Bending performance (full working width) 6 mm from pipe diameter 286 mm Standard equipment: Ksdpod Eqg Hjfx Ah Njdg Double linear guide system for roller movement Extremely wide bearing blocks MCS double bearing system for the roller rotation Extra heavy double hinged folding bearing Electronic parallelism system EPS Hardened rollers for high wear protection All rolls ground after heat treatment Siemens S7 PLC control Hitech hydraulic and electric package Safety trip wire with emergency stop and CE certification central lubrication cone bending device Optional equipment included: CNC control PGS-ABSOLUTE

Condition: new, functionality: fully functional, Year of construction: 2026, A STURDY GIANT FOR THE PRODUCTION OF NATURAL GAS PIPELINES Exclusive Features: • Max Pipe Length: 12.000 mm • Max Bending thickness (mild Steel): 12.000 x 28mm • 3 rolls with Variable Axis configuration • Anti-deflection System for Top roll • Anti-deflection System for Bottom Rolls • 3 rolls drive • Automatic Pipe Ejection System Capacities for Material Yield 360Mpa 12.000 x 17mm a D= 1500mm 12.000 x 15mm a D= 550mm 6.000 x 22mm a D= 1500mm 6.000 x 19mm a D= 550mm Kjdpfx Ahsgurb He Njdg Possibility of adding interchangeable top rolls to reach Higher thickness capacities up to more than 12000x23mm or Smaller Diameters down to 400mm. Available immediately from the factory!

Year of construction: 2026, condition: new, extruder 30 mm with die-face pelletizer, the housing, made from stainless steel, is swivelling. the lenght of the granules is adjustable by means of the cutting speed. Kodpfx Ajf Uc Ugoh Nodg optionally, we offer a transport belt for cooling the granules.

Condition: good (used), functionality: fully functional, Year of construction: 2000, sheet thickness steel (max.): 16 mm, back gauge: 1,000 mm, cutting length (max.): 3,150 mm, foot switch Kdjdpev Syyvefx Ah Njg motorized arrester behind cutting angle adjustment Technische Daten / technical details: Schnittleistung / max. cutting capacity 16 mm max. Schnittlänge / max. cutting length 3150 mm Anschlag / limit stop 1000 mm Gewicht der Maschine / weight 16300 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), motorized limit stop behind foot switch Technische Daten / technical details: Schnittleistung (Blechdicke) / max. cutting capacity (thickness of sheet) 6 mm Kdodpfx Ashtq N Noh Njg Schnittlänge / max. cutting length 2035 mm Hinteranschlag / arrester behind 1000 mm Ständerweite / distance between columns 2000 Mm Antriebsleistung / drive capacity 11 kW Gewicht der Maschine / weight 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, functionality: fully functional, control type: manual, roller (bottom) diameter: 80 mm, roller (top) diameter: 80 mm, side roll diameter: 80 mm, working width: 1,040 mm, overall weight: 400 kg, Capacity: 1040 x 2,5 mm. Capacity with prebending: 1040 x 1,5 mm. Upper roll: 80 mm. Lower roll: 80 mm. Country of origin: Sweden. Size (L x W x H): 1750 x 650 x 1100 mm. Kdjdpsx Upgpsfx Ah Nog Weight: 400 Kg. Asymmetric.

Condition: new, The KRM ST 30/5, a robust Plate Rolling Machine from KNUTH, is designed for exceptional performance in the category of 3-Roll Motor Plate Rollers. This heavy-duty machine is capable of bending workpieces up to 3000 mm in length, making it ideal for a variety of applications in metalworking, steel, and metal construction. With features like a solid, closed machine frame, a motorized rear roller, and hardened rollers, it provides reliable and precise results. The asymmetrical roll arrangement accommodates heavy plates, and its conical bending capabilities are enhanced by an adjustable rear roller. Moreover, it includes a user-friendly separate control panel with a foot switch for easy operation. Maintenance is simplified through central lubrication, ensuring long-lasting functionality. You can take advantage of the KRM ST 30/5 for your plate rolling needs; request a quote now and enhance your sheet metal processing capabilities. Kdsdpfx Aheihvtgj Neg

Condition: good (used), Year of construction: 1982, Dimensions 3,620 x 1,600 mm Plate thickness 245 mm with base – working height 780 mm longitudinal slots 34 mm cross slots 18 mm Weight approx. 5,000 kg Kdjdpfx Aox T Dbreh Njg PRICE ON REQUEST!

Condition: used, Grafoteam PST-36L Stacker max. plate length 1100 mm max. plate width 900 mm Kdjdpfx Aow N Swloh Nog

Condition: used, For export only! Kdedpfewz It Iox Ah Nog

Condition: used, Switchable Permanent Magnetic Chuck Ø500 Switchable permanent-magnet round chuck with Ø 500/75 mm high 08 / R574 Manually switchable permanent-magnet round chuck Ø500 Permanent round magnet R 574 Magnetic round chuck for a machining machine, e.g., turning, grinding, 75 mm high For adapter flange All technical data subject to errors/omissions. Price on request Sale exclusively to countries within the EU. Kdsdpfx Ajx Aqubeh Njg

Condition: used, Year of construction: 2008, sheet width 3200 mm plate thickness 6 mm distance between columns 3200 mm back stop - adjustable 20 - 600 mm dimensions ca. 4010 x 1610 x 1620 mm engine output 7,5 kW Control eView weight of the machine ca. 7,2 t CNC swing cut panel shears electrical components from Siemens, ABB and Mitsubishi, Pilz safety control hydraulic components made in Italy 3 support arms and 1 angle stop Ksdpfjqva Rzex Ah Nedg Ball rollers in the table Operating instructions available

Condition: excellent (used), For sale rotary table for boring machine Table 2000mmx2000mm Table weight 20000kg Kdsdpfxsui Nt No Ah Nsg Max table load 40000kg Travel 2000mm Control Table condition perfect

Condition: new, EROWA clamping pins F/A Inox (1 set = 20 pieces) ER-007980, new and originally packaged Kdodpfx Aex Tr Awsh Nog

Condition: new, EROWA Uniplatte C (1 set = 12 pieces) ER-093780, new and in original packaging Kedsx Trwzepfx Ah Nedg

Condition: new, functionality: fully functional, FLAIG Permanent Magnetic Chuck 300 x 150 x 51 mm, type PMSF/PMNM, with ultra-fine transverse pole division, magnetic system with neodymium magnets, fine pole spacing, removable key, maximum holding force 100 N/cm², magnetic field height 5 mm, pole plate wear allowance 6 mm, weight 19 kg, for clamping the smallest thin-walled workpieces for grinding and EDM work, ideally suited for pallet systems due to its very low dead weight. Ksdpfx Ajx Tqfkjh Nedg

Year of construction: 2005, condition: used, Fabricant : Alfa Laval Model : Tetra pak C10-SM Year : 05 Type : Échangeur à plaque Kdedpfx Aox R A Edoh Njg Application: pasteurizer Fluid group: 2 Volume: 533 L Pressure: 0/16.0 bar Temperature: 0 / 110°C Sections: 5 Plates: 64 units

Condition: good (used), functionality: fully functional, Year of construction: 1997, machine/vehicle number: C971109, controller manufacturer: AMADA, controller model: PROMECAM, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, overall weight: 10,000 kg, total length: 4,500 mm, total width: 3,500 mm, total height: 2,800 mm, AMADA GPX 630 Guillotine Shear - Power supply: 5.5 kW - Max. backgauge travel: 160 mm - Including left stop Kdodpfoxw T Iasx Ah Neg - Backgauge length: 3200 mm - Cutting length: approx. 3050 mm Note: The item must be definitively collected between 19 and 23 January 2026 on a date to be mutually agreed. FCA D-76571 Gaggenau – loaded onto truck

Condition: used, Used Seitz Enzinger Noll reportedly model 60/150 type C stainless steel filter press. Unit has (67) 600mm x 600mm stainless steel plates and (1) stainless steel end plate which will accomodate (66) filter sheets giving approximately 22m2 filtration area. Unit is type C with central tightening device via spindle and capstan handle. Ksdpfjx Ryrbox Ah Nsdg

Condition: used, Year of construction: 1998, sheet width 3050 mm plate thickness 6 mm rear stop 10 - 750 mm cutting angle 0,5 - 3 ° down holder 18 Stk no. of strokes 9 / 14 Hub/min total power requirement 7,5 kW dimensions of the machine ca. 3750 x 1600 x 2450 mm weight 4800 kg Features: - Electro-hydraulic, slide-guided sheet metal guillotine shears - Front control panel, front left - With electro-hydraulic cutting angle adjustment - With manual cutting gap adjustment, from the front (eccentric) - Electric motor rear stop 10-750 mm (ball screws) - With analog position display + hand wheel for fine adjustment Kjdew S Nknopfx Ah Nodg - 1x side stop - 3x support arms - 1x freely movable foot switch - Front finger guard - Operating instructions (PDF)

Condition: used, Year of construction: 1983, sheet width 3050 mm plate thickness 6,0 mm distance between columns 3000 mm Kodpsvxlpiofx Ah Nedg cutting angle 0,5 - 3 ° no. of strokes 9 / 14 Hub/min down holder 18 total power requirement 10 kW weight of the machine ca. 4800 kg dimensions of the machine ca. 3750 x 1600 x 1650 mm Features: - Hydraulic / slide-guided sheet metal guillotine shears - Electric backgauge 10-750 mm - Electric cutting angle adjustment - Manual cutting gap adjustment - 1x side stop - Front finger guard - Foot switch

Condition: used, Year of construction: 2012, sheet width 3100 mm plate thickness 16 mm distance between columns 3400 mm cutting angle 2,5 ° work height max. 900 mm rear stop 1000 mm down holder 14 Stück Control CYBELEC CYB TOUCH 6 oil volume 500 l no. of strokes 10 Hub/min total power requirement 30 kW weight of the machine ca. 16400 kg dimensions of the machine ca. 4150 x 2360 x 2450 mm Features: Kjdpfx Aowli Nfsh Nodg - Electric rear stop 1000 mm - Electric cutting gap adjustment - Electric cutting angle adjustment - Cutting length limitation - CYBELEC CybTouch 6 control - Light barrier behind the machine - Finger protection at the front - Ball rollers in the support table - 1x side stop - 2x front support arms - Foot switch

Condition: used, Year of construction: 1978, sheet width 3100 mm plate thickness 2 mm rear stop 1000 mm cutting angle 1°06 ° no. of strokes 45 Hub/min total power requirement 3,0 kW dimensions of the machine ca. 3600 x 2200 x 1600 mm weight 4500 kg Equipment: - Electric motorized backgauge - With digital ELGO position display - Manual cutting gap adjustment - 1x side stop with mm scale - 2x support arms - 1x freely movable double foot switch - Front finger guard Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts Kedpfxouagxpj Ah Nodg

Condition: used, Year of construction: 1985, sheet width 2500 mm plate thickness 6 mm rear stop 750 mm down holder 16 Stk total power requirement 12 kW weight 5400 kg dimensions of the machine ca. 3000 x 1500 x 2000 mm Equipment: - Electric backgauge 750 mm Kdodpfx Ahst Sykqo Nsg - Pneumatic sheet metal holders - 2x side stops - 3x front support arms - Ball rollers in the front support table - Rear sheet metal chute - Foot switch

Condition: used, Year of construction: 1985, sheet width 2550 mm plate thickness 4 mm rear stop 1000 mm Ksdpfsv Uq Snex Ah Nodg cutting angle 1,5 ° down holder 14 Stk total power requirement 6,5 kW weight 3400 kg dimensions of the machine ca. 3000 x 1500 x 2000 mm Features: - Electric rear stop 1000 mm - Electric cutting angle adjustment - 1x side stop 1250 mm - 3x front support arms - Front finger guard - Foot switch