Used Everun Er 12 for sale (145,080)

Year of construction: 1994, condition: good (used), Baljer Zembrod root reducer Dlodpfjn Skz Tex Ab Toa with radio remote control

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, working width: 380 mm, area performance: 1,520 m²/h, warranty duration: 12 months, tank capacity: 12 l, total height: 1,090 mm, total width: 495 mm, total length: 995 mm, water tank capacity: 12 l, We offer for sale a compact scrubber-dryer: BD 38/12 C Bp Pack Condition of the machine: Very good Year of manufacture: 2016 The machine is in very good condition, both visually and technically. It has undergone a comprehensive, detailed overhaul, making it fully operational and ready for use. All equipment offered by us is presented in genuine photographs—you are buying exactly the machine shown in the pictures. A 12-month WARRANTY is provided on all devices purchased from us. Technical Specification Drive type: Battery-powered Traction drive: Advanced technology via rotating brush Working width (brushes): 380 mm Working width (vacuuming): 480 mm Clean/dirty water tank: 12 / 12 l Theoretical area performance: 1,520 m²/h Practical area performance: 1,140 m²/h Battery type: Li-Ion Battery supply: 25.2 / 21 V / Ah Maximum battery runtime: 1.5 h Battery charging time: approx. 2.7 h Charger supply voltage: 220–240 / 50–60 V / Hz Brush rotational speed: 180 rpm Brush pressure: 25–30 / 16–20 g/cm² / kg Aisle turning width: 1,050 mm Water consumption: 1 l/min Sound pressure level: 65 dB(A) Nominal power: 500 W Colour: anthracite Permissible total weight: 48 kg Weight without accessories: 36 kg Dimensions (L x W x H): 995 x 495 x 1090 mm The set includes: - New batteries - New disc brush - New squeegee blades - New protective rubbers Dodpfx Asw If Inob Tola

Condition: used, mileage: 23,089 km, power: 177 kW (240.65 HP), first registration: 12/1993, overall weight: 13,500 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: mechanical, total width: 2,500 mm, total height: 3,200 mm, Equipment: ABS, all wheel drive, +++ Extremely clean vehicle with only 23,089 original km +++ without rear-built-in pump (was defective) Ideal base for an expedition vehicle. 1,200 l water tank is leak-free, baffle plates are defective, mechanical light mast Pneumatically extendable side steps left + right All-wheel drive 4x4 with 2x differential locks – center and rear, ABS Wheelbase 3,640 mm Maximum speed according to documents 95 km/h, GPS = 97 km/h Djdpfx Abexnukwj Tela Freshly serviced including greasing, new fuel filter, and new air dryer cartridge +++ Subject to errors, changes, and prior sale

Year of construction: 2002, condition: excellent (used), Manufacturer: GBS Year of manufacture: 2002 Djdpfsmv Hz Iex Ab Tola Weight: 350 kg Working length: 3300mm Pipe thickness: 12 and 15 mm 2 heads, force: 2t

Condition: good (used), Load capacity : 12t Useful (lifting height) 480mm: Dedpehd N Rgefx Ab Tjla

Condition: used, This listing is for the Thermo Scientific™ F1-ClipTip™ 12-Channel Pipette The unit is in full working condition and is ready for immediate use The Thermo Scientific™ F1-ClipTip™ 12-Channel Pipette is a high-precision manual pipette designed for efficient and reproducible liquid handling in laboratory settings. It features Thermo Fisher's innovative ClipTip™ technology, ensuring secure tip attachment and ejection without the need for forceful insertion or removal. Key Features Djdpjxv Di Ejfx Ab Tela Number of Channels: 12 Volume (Metric): 30 to 850 μL Increments: 1 μL Compatible Tips: ClipTip 1000 Color: Blue Model: Bluetooth* (see description section below for more details) Programmability: Yes Type: 96 format (designed for 96-well plate applications) Volume Range: 30 to 850 μL (with the ClipTip 1000) Tip Attachment: Tips lock securely in place with a light touch and remain sealed until intentionally ejected Ergonomic Design: Lightweight handle with a 120° adjustable finger rest for both right- and left-handed users Volume Adjustment: Secure volume lock to prevent drift during operation Warranty: Industry-leading lifetime warranty with convenient online registration Certifications: CE-marked in accordance with IVD Directive in Europe; manufactured according to ISO 9001, ISO 14001, and ISO 13485 standards Applications Ideal for applications requiring high precision and reproducibility, such as: Genomics and proteomics Microplate assays Cell culture and drug discovery High-throughput screening

Condition: used, axle configuration: 3 axles, first registration: 04/2019, suspension: air, tire size: 385/65R22.5, color: grey, Year of construction: 2019, Tyre size: 385/65R22.5 Axle brand: SAF CD Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9,000 kg; Tyre tread left: 60%; Tyre tread right: 60% Rear axle 2: Max. axle load: 9,000 kg; Tyre tread left: 70%; Tyre tread right: 70% Rear axle 3: Max. axle load: 9,000 kg; Tyre tread left: 70%; Tyre tread right: 70% Unladen weight: 8,000 kg Dodpfxexl Sqvs Ab Tela For more information, please contact Bob Beukers.

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 1,500 W, positioning speed: 80 m/min, repeat accuracy: 0.03 mm, input frequency: 50 Hz, warranty duration: 24 months, working range: 6,000 mm, Equipment: cooling unit, safety light barrier, G-12A HIGH SPEED PROFESSIONAL TUBE LASER CUTTING MACHINE 1500-3000W The G series is equipped with many high-quality components with extreme performance and powerful cutting functions,suitable for tube cutting of various types and diameters ● The Highest Standards of Chucks in the Industry ● Two Methods for Fewer-tailing Cutting ● Variable Diameter Wheel Supporting ● Automatic Unloading Device ● Super Dust Removal System ● Patented Dust Baffle ● High-strength Cage Structure Welded Machine Bed Technical Parameter: Power: 1500W-3000W Maximum Tube Processing Size: 6000mm*φ120mm Max. Rotating Speed of Chucks: 160r/min X/Y-axis Positioning Accuracy≤0.05mm X/Y-axis Repositioning Accuracy≤±0.03mm Maximum positioning speed: 80m/min Max. Acceleration: 1.5G Round Tube Processing Dim: Φ10mm-Φ120mm Square Tube Processing Dim: 10mm*120mm Overall Dimensions: 9000mm*2700mm The Highest Standards of Chucks in the Industry The highest standards of chucks in the industry with strong clamping force, high rigidity, high speed, and stable performance Two Methods for Fewer-tailing Cutting Support two fewer-tailing cutting methods , choose one of them on the software interface according to different tube diameters Chuck double jaws: standard double jaws, small tube cutting precision is guaranteed Support: 2 sets of variable diameter wheel support standard (optional to increase to 3 sets)/optional servo support Unloading: [3M/4M] cylinder unloading rack/optional-[3M/4M] servo unloading rack/optional Loading: [Fully automatic loading rack/simple fully automatic loading rack/semi-automatic loading rack]/optional Dust removal: standard rear card hollow dust removal Short tail: chuck fixed, crossbeam fixed, short tail, front card open, rear card Continue to move forward, shorten the tail, ≥80 mm; if the short tail function is not used, the tail is about 200 mm Variable Diameter Wheel Supporting G Series has a wide range of cutting for various types and diameters of tubes, supported by the variable diameter wheel Automatic Unloading Device Efficient automatic unloading, saving time and labor costs, greatly improving production efficiency Super Dust Removal System The super dust removal system with ventilation design inside the chuck and the tube reduces the slag hanging in the tube, which is independently researched and developed by Glorystar Patented Dust Baffle Patented dust baffle protects important components from pollution and ensures stable performance High-strength Cage Structure Welded Machine Bed The industry’s highest-quality high strength cage structure welded machine bed with long life, anti-vibration, anti-torsion and anti-deformation Dedsuc Sifepfx Ab Tola

Condition: excellent (used), mileage: 236,455 km, power: 353 kW (479.95 HP), first registration: 10/2011, fuel type: diesel, color: yellow, axle configuration: 8x4, fuel: diesel, wheelbase: 4,200 mm, brakes: engine braking, driver cabin: day cab, gearing type: mechanical, emission class: euro5, Year of construction: 2011, Equipment: ABS, air conditioning, cruise control, low noise, soot filter, spoiler, = Additional Options and Equipment = - Aluminium fuel tank - Power brake booster - Electric windows Dodpfsuxqgqsx Ab Tsla - Electrically adjustable exterior mirrors - Speed limiter - Air horn - Fog lights - Particulate filter - Radio/cassette player - Reversing camera - Sun visor - Stability control - Toolbox - PTO (power take-off) - Central locking system = Further Information = Front axle: Steered Rear axle 1: Twin tires Rear axle 2: Twin tires Rear axle 3: Lift axle; Steered Fuel tank capacity: 500 liters Body manufacturer: MTS DINO 12 Technical condition: very good Optical condition: very good MERCEDES-BENZ ACTROS 3248 8X4 TRIDEM MTS DINO 12 SUCTION EXCAVATOR EURO 5 L PACKAGE 480 HP 8X4 TRIDEM DRIVE – LAST AXLE LIFTABLE AND STEERABLE Wheelbase: 420 cm Air suspension Actros cab with air conditioning, camera Differential lock Manual transmission MTS DINO 12 SUCTION EXCAVATOR (TYPE 4A14 T 36.000 V) DOUBLE TURBINES!!! Hydrostatic drive with remote control Power boom with rotary head Central lubrication system 2x radio remote controls Extra high-pressure pump unit (200 bar) with hoses and gun Extra air valves at the rear of the truck for using pneumatic tools such as a hammer Compressor: 6,112 hours Fan: 6,140 hours All available manuals and service books Follow us on Instagram: geurtstrucks We speak German Hablamos Español We speak English

Condition: good (used), machine/vehicle number: 3315, Year of construction: 2019, load capacity: 16,000 kg, lifting height: 4,000 mm, mast type: duplex, fork carriage width: 200 mm, fork length: 2,440 mm, total length: 5,400 mm, total width: 2,550 mm, operation weight: 23,610 kg, additional equipment features: Warning triangle, Dual tread, Engine heater, Front mud guards, Hydraulic sliding cabin, Rear mud guards, Weight system, Equipment: lighting, Hyster H16.00XM-12 from Uniktruck Dsdpfxov Hhags Ab Tjla

Year of construction: 2020, condition: used, Year of manufacture: Nov 2020 New: No 6 TRAILERBANDEN 385/65 R 22.5 / ZO VAN SCHADE TRAILER / GOEDE 385/65 R 22.5 OP VELG PRIJZEN VAN 150 TOT 250 EURO P STUK Djdpfxsxvbh Ee Ab Tjla

Condition: used, Roller conveyor + cross conveyor + roller conveyor good technical condition Dsdpjk Ritpefx Ab Tola

Condition: used, Radial Drilling Machine SCHLUMBERGER 36-12 Spindle: Ø 110 mm - Right rotation Dodpfx Aexu Ibpeb Tsla Cone: CM4 Spindle exit: 200 mm Rotation: from 40 to 750 RPM Table size: 1000 x 700 mm Slide travel: 700 mm Automatic descent Recent electrical panel Lubricant pump Voltage: 380 V Back table dimensions: 1200 x 750 mm Machine support dimensions: 1400 x 1200 mm Total height in height position: 2800 mm Total height in low position: 2550 mm Weight: approx 3,5 T

Condition: good (used), Year of construction: 2021, machine/vehicle number: 2105261-01, Offer 25388 Technical Data: - Load capacity 1000 kg - Electric chain hoist VETTER - 2 lifting speeds 4 + 1 m/min Dlodpfoxt Iq Iex Ab Tsa - Jib outreach approx. 2000 mm - Jib arm IPE 220 - Hook height approx. 2700 mm - Slewing radius 360° - Total height approx. 3300 mm - Baseplate of column / pedestal approx. 1400 x 1400 mm - Total length approx. 2900 mm - Total weight approx. 4400 kg - Connection 400 V / 32 A

Condition: excellent (used), axle configuration: > 3 axles, first registration: 10/2016, loading space length: 90,000 mm, loading space width: 2,550 mm, loading space height: 850 mm, total length: 12,400 mm, total width: 2,550 mm, total height: 850 mm, suspension: hydraulics, tire size: 245/70/17.5, color: red, Year of construction: 2016, Equipment: ABS, Axle configuration Tire size: 245/70/17.5 Dodpfx Ajv S U R Nsb Tjla Brakes: Drum brakes Suspension: Hydraulic suspension Rear axle 1: Twin tires; Max. axle load: 12,000 kg; Steered Rear axle 2: Twin tires; Max. axle load: 12,000 kg; Steered Rear axle 3: Twin tires; Max. axle load: 12,000 kg; Steered Rear axle 4: Twin tires; Max. axle load: 12,000 kg; Steered Weights Unladen weight: 14,200 kg Payload: 39,800 kg Gross vehicle weight (GVW): 54,000 kg Functional Loading platform height: 85 cm Extendable body: Yes Condition Technical condition: Very good Visual condition: Very good SCHEUERLE EUROAXLE 1T4 4-AXLE SINGLE-TELESCOPIC SEMI LOW LOADER 4 x hydraulically suspended axles 4 x hydraulically steered axles 12,000 kg per axle Technically permissible gross weight: 66,000 kg Electrohydraulic steering assistance system Remote control Tire size: 245/70 R17.5 Extendable up to 620 cm Loading area length: 900 cm + 620 cm, extendable up to 1,520 cm Loading area width: 255 cm + 2 x 22.5 cm extensions, total width 300 cm Platform height: 85 cm Lashing rings and round recessed pots

Condition: used, Year of construction: 2019, load capacity: 16,000 kg, lifting height: 5,600 mm, total length: 8,000 mm, - Antrieb: Diesel - Bedienung: Sitz - Tragfähigkeit (kg) 16000 - Lastschwerpunkt (mm) 1200 - Lastabstand (PIN-Typ) 1077 - Reifen: Luft - Achsbelastung mit Last vorne/hinten kg (900 mm Lastschwerpunktabstand) 41,640 / 3,377 - Achsbelastung mit Last vorne/hinten kg (1200 mm Lastschwerpunktabstand) 39,145 / 3,363 - Achsbelastung ohne Last vorne/hinten kg 13,430 / 13,078 - Anzahl der Räder, vorne/hinten (X = angetrieben) 4X / 2 - Spurweite, vorne (mm) 2,400 - Spurweite, hinten (mm) 2,175 - Hubgerüstneigung: a = vorwärts/ b = rückwärts 10/12 ° - Höhe Hubgerüst eingefahren mm 4,390 - Sitzhöhe mm 2,145 - Kupplungshöhe mm 822 - Arbeitsgangbreite bei 2400x2400 Paletten quer mm 8,900 - Wenderadius mm 5,253 - Kleinster Drehpunktabstand mm 840 - Fahrgeschwindigkeit mit/ohne Last km/h 26/28 Dodpfoxpx R Dox Ab Tjla - Hubgeschwindigkeit mit/ohne Last m/sec 0,33/0,38 - Senkgeschwindigkeit mit/ohne Last m/sec 0,34/0,39 - Zugkraft mit/ohne Last bei 1,6 km/h 97/99 N - Max. Zugkraft mit/ohne Last 126/128 N - Steigfähigkeit mit/ohne Last bei 1,6 km/h % 24/42 - Max. Steigfähigkeit mit/ohne Last bei 1,6 km/h % 32/35 - Beschleunigungszeit mit/ohne Last (0-15 m Abstand) sec 5,9/6,5 - Betriebsbremse Hydraulisch - Motorhersteller und -typ Cummins QSB6.7 - Zylinderzahl/Hubraum Stage IIIA/B no./l 6/6,7 - Antriebssteuerung Drehmomentwandler - Druck Anbaugeräte MPa 15 - Öldurchfluss Anbaugeräte l/min 105 - Abschleppvorrichtung: Welle

Condition: used, maximum load weight: 28,440 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2014, next inspection (TÜV): 09/2026, loading space length: 7,610 mm, loading space width: 2,300 mm, loading space height: 1,500 mm, loading space volume: 26 m³, total width: 2,550 mm, total height: 3,030 mm, Equipment: ABS, Steel rear tipping body approx. 26 cbm, roll tarp, ABS, EBS, BPW EcoPlus axle(s), drum brake system, air suspension, on/off switch for tipper lowering, lift axle, support winch(es). Vehicle may feature advertising stickers and/or lettering. Our offer generally excludes a new roadworthiness inspection (TÜV). If a new TÜV is required, we will gladly provide you with a quote from our partner workshops! Vehicle may feature advertising stickers and/or lettering. Our general delivery and payment terms apply. We are happy to provide you with a financing or leasing offer for this unit. Please contact us! Dsdpfx Aoxpcdnjb Tsla

Condition: used, mileage: 235,570 km, power: 105 kW (142.76 HP), fuel type: diesel, gearing type: automatic, overall weight: 5,500 kg, first registration: 04/2021, next inspection (TÜV): 05/2026, loading space length: 3,380 mm, loading space width: 2,210 mm, loading space height: 1,900 mm, emission class: euro6, color: white, number of seats: 2, total length: 6,320 mm, total width: 2,310 mm, total height: 2,965 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, tail-lift, Mercedes-Benz Sprinter 514 CDI Refrigerated Box Truck ---- * Refrigeration unit: Carrier Xarios 350 * In-transit cooling * Standby cooling – power connection (electric operation – electric connection) * Rear double-wing doors * Tail lift with 1,000 kg lifting capacity * Right-side doors ---- * 1st hand (one previous owner) * NEW: TÜV inspection (valid until 05/2026) * NEW: Oil change service ---- * Air conditioning * Cruise control * Lane keeping assist * Active brake assist * Rear view camera * Driver’s seat heating * Keyless Go * Automatic headlights * Engine start/stop function * Electric windows * Electrically adjustable exterior mirrors * Central locking with remote control * ABS * ESP * Driver airbag Dsdew Egw Tjpfx Ab Tjla * Armrest on driver's seat * Driver comfort suspension seat * Euro 6 D engine * Automatic transmission with shift paddles * Radio: tuner, USB-C, media/music playback via Bluetooth audio * Bluetooth hands-free system * Roof spoiler ---- * Truck registration (N2) * Wheelbase: 3,665 mm (medium wheelbase) * Dimensions (cargo area) LxWxH: 3.38 x 2.21 x 1.90 m * Dimensions (vehicle) LxWxH (in mm): 6,320 x 2,310 x 2,965 mm * Permissible total weight: 5,500 kg * Payload: 2,286 kg * 2 vehicle keys available * VAT deductible ---- * We speak German / English / Greek ????? ???? * Financing available upon request * We will assist you with all registration (customs license plate/temporary plate) and customs formalities * We will be happy to make you a purchase offer for your vehicle * Web: * E-mail: ---- Price changes, prior sale, typographical errors and mistakes excepted

Condition: good (used), Studer S30-12 cylindrical grinding machine TECHNICAL DATA Main dimensions Center height: 125 mm Center width: 400 / 700 / 1025 mm Largest longitudinal slide path: 400 / 700 / 1000 mm Longitudinal slide Table speed: 50 - 5000 mm/min Reversing delay: 0-6 s Smallest automatic travel: 1.5 mm Max. stroke: 400 / 700 / 1020 mm Max. Table inclination: 12 / 30 / 78° Cross slide Swivel range: +- 45° Quick adjustment: 40 mm Feed path with handwheel: 20 mm Largest plunge depth: 1.7 mm Sanding headstock Grinding wheel diameter x width x bore: 450 x 80 x 203 mm Speed: 1340 / 1500 1625 / 1800 / 2000 / 2200 rpm Coarse adjustment: 210 mm Workpiece headstock Swivel range: 0 - 90 Speed range: 30 - 675 rpm Mounting cone: Morse 5 Collets: W25 Tailstock Dlodpfsvca Izox Ab Toa Mounting cone: Morse 3 Adjustment travel of the center: 30 mm Total power requirement: 5 / 8.25 kW No liability is assumed for the correctness, completeness and up-to-dateness of the information.

Condition: used, Trolley 12 levels - year of construction unknown - min. part length 320 mm - max. part height approx. 90 mm - number of levels 12 pcs. - distance between levels 100 mm Dedpfowbtvuox Ab Tjla - insertion depth of levels 650 mm - Upright stands 300-450-450-300mm, 5 pcs. - Total height 1.740 mm - Total width 1.540 mm

Condition: good (used), Bench drill, pillar drill, column drill, column drill -Manufacturer: WMW Heckert, bench drilling machine type BT 12/1 with base frame -Clamping table: 340 x 280 mm -Travel: 370 mm -Spindle holder: MK2 -Projection: 215 mm -Speeds: 224/450/900/1800 rpm -Column: diameter 92 mm -Spindle stroke: 100 mm / depth stop with fine adjustment Dsdsir E Snepfx Ab Tsla -Motor: VEB 0.4/0.7 kW with brake -Voltage: 380 V -Dimensions: 620/480/H1710 mm -Total weight: approx. 182 kg

Condition: used, _____ 2 Pieces of Pfiffner RT 100-12 Dlodpfx Absw Si T Ae Tja Description: Year of manuf. : 2013 Control : Siemens 840 D Rotary-Indexing-table/Spindle: Clamping stations:12 motorised spindles Drive:Torque drive, water-cooled Position measuring system:Direct Switching time:1.5 seconds Spindles:Water-cooled motor spindles C-axes:0.001°, hydraulic clamping Speed:5,500 rpm Power:11 kW Clamping device:Chuck Basic modules: Technology:Positioning module, 3-axis X-axis:50 mm Y-axis:100 mm Z-axis:100 mm Position measuring systems:Direct in all axes Coolant supply:Integrated : : Workpiece size (max.):100 x 100 x 100 mm Station 1: Horizontal:feeding of raw parts (indexing conveyor + Stäubli robot) Vertical:Measuring raw part Station 2: Horizontal:4-fold turret without drive Vertical:Measuring reclamping error (C-axis zeroing) Station 3: Horizontal:4-fold turret without drive Vertical:Not used Station 4: Horizontal:4-fold turret without drive Vertical:Not used Station 5: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:6-position turret with WAN 10,000 rpm Station 6: Horizontal:4-fold turret without drive Vertical:Not used Station 7: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:Not used Station 8: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:Not used Station 9: Horizontal:4-fold turret without drive Vertical:Not used Station 10: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:Not used Station 11: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:6-position turret with WAN 10,000 rpm Station 12: Horizontal:Charging/discharging unit with double swivelling gripper + discharging belt Equipment: Chipmanagement:Chip conveyor High preassure unit:Cooling unit 50 bar Toolmonitoring:Toolbreaktagecontrol ARTIS Rawmaterialfeed:Conveyorbelt with robot Finishpartremoval:Conveyor with 3-way switch Oilmistseparation:Electrostatic filter Fire extraction system:Kraft + Bauer Part labelling:Laser Parts cleaning:HESO cleaning system

Year of construction: 2025, condition: new, functionality: fully functional, Bucket Screen buckets for screening all loose materials. Dlodpsv D Hb Dofx Ab Toa 8mm and 16mm sizes of screened fractions, both of which are already included in the price of the bucket. HARDOX as standard on the most used parts of the bucket. ANTISTICK the non-stick surface of part of the bucket, for faster and easier work. Various sizes, 2,3,4,5 or 6 shaft buckets

Condition: used, Small log line with Chipper-canters and single blade splitsaw Dledpfxeiiciqs Ab Tea Feeding / sawing speed 60 m/min. The line consist of below parts: - Conveyor for logs - Centring infeeder with log turner - First chipper-canter for round logs - Out feed conveyor - Block tilter - Infeeder to second canter - Second chipper-canter for blocks - Out feed conveyor - Single blade splitsaw We can also offer the equipment serviced

Condition: used, mileage: 90,616 km, power: 177 kW (240.65 HP), first registration: 03/1998, overall weight: 15,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: mechanical, Year of construction: 1998, total width: 2,400 mm, total height: 3,170 mm, Equipment: ABS, compressor, Mercedes-Benz 1524 with METZ DLK 23-12 PLC III Turntable Ladder in operational condition! ----First registration: 05.03.1998 Mileage: 90,616 km Operating hours: 3,626 h Base vehicle features: * Leaf spring suspension on rear axle * Wheelbase: 4,250 mm * Permissible gross weight: 15 t * 7-speed manual transmission * 127 l fuel tank located under rear platform * Differential lock on rear axle * Reinforced rear leaf springs and shock absorbers * Reinforced front torsion bar, stabilizer, and shock absorbers * Dual passenger seat bench * Exhaust pipe for fire service exiting before front axle * Engine brake * Anti-lock braking system (ABS) * Traction control system (ASR) * Fog lights * Hour meter Dlsdpfx Ajxa Sbwjb Tsa * Headrest for driver * 2 headrests for passenger seats * Rear wall of cab with 2 windows * Electric window lift right side * Heated, electrically adjustable exterior mirrors with wide-angle section * Ramp mirror right side * Blue rotating beacon and Martin horn * Front blue flashers Turntable ladder superstructure features: * Metz turntable ladder DLK 23-12 PLC III with rescue basket (rescue height approx. 30.75 m). Max. elevation angle: 75 degrees, max. basket load: 270 kg, nominal rescue height: 23 m, nominal outreach: 12 m, stabilizers: horizontal/vertical, adjustable stabilizer width between 2,400 mm and 4,500 mm * Folding rescue basket for 3 persons * 2 x 24V LED spotlights at front of rescue basket * Lifting lug at tip of lower ladder section from reinforced ladder set for lifting, lowering, and swiveling loads * Mount for portable 5 kVA generator at rotating platform * 2 x 24V/70W halogen spotlights at head of lower ladder section, teleflex-controlled from main operator station * 400V power supply protected in ladder set to tip of upper ladder incl. socket and power feed with plug for generator at rotating platform * Derivation cable from head of upper ladder to rescue basket with 1 x 400V and 2 x 230V sockets in basket * Fixed water conduit in lower ladder section * Detachable nozzle in rescue basket * Storage holder for nozzle * METZ stretcher mount SLK 111 incl. holder on platform * Compartment for stretcher storage in platform * Martin horn with 4 trumpets instead of BOSCH loud horns * Permanently installed charger 230V / 24V * Service manual available, all maintenance performed annually ----Immediately ready-to-use vehicle from first owner in well-maintained condition! New safety inspection (SP) New general inspection (HU) Non-smoking vehicle! Your contact for this vehicle: ---- Daniel Seidler Phone: Mobile: (also WhatsApp) Email: Subject to changes, prior sale and errors!